Association of hydrophobically-modified poly(ethylene glycol) with fusogenic liposomes

We present results on using cooperative interactions to shield liposomes by incorporating multiple hydrophobic anchoring sites on polyethylene glycol (PEG) polymers. The hydrophobically-modified PEGs (HMPEGs) are comb-graft polymers with strictly alternating monodisperse PEG blocks (M_w=6, 12, or 35 kDa) bonded to C18 stearylamide hydrophobes. Cooperativity is varied by changing the degree of oligomerization at a constant ratio of PEG to stearylamide. Fusogenic liposomes prepared from N-C12-DOPE:DOPC 7:3 (mol:mol) were equilibrated with HMPEGs. Affinity for polymer association to liposomes increases with the degree of oligomerization; equilibrium constants (given as surface coverage per equilibrium concentration of free polymer) for 6 kDa PEG increased from 6.1±0.8 (mg/m²)/(mg/ml) for 2.5 loops to 78.1±12.2 (mg/m²)/(mg/ml) for 13 loops. In contrast, the equilibrium constant for distearoylphosphatidylethanolamine-poly(ethylene glycol) (DSPE-PEG5k) was 0.4±0.1 (mg/m²)/(mg/ml).The multi-loop HMPEGs demonstrate higher levels of protection from complement binding than DSPE-PEG5k. Greater protection does not correlate with binding strength alone. The best shielding was by HMPEG6k-DP3 (with three 6 kDa PEG loops), suggesting that PEG chains with adequate surface mobility provide optimal protection from complement opsonization. Complement binding at 30 min and 12 h demonstrates that protection by multi-looped PEGs is constant whereas DSPE-PEG5k initially protects but presumably partitions off of the surface at longer times.     

Association of hydrophobically-modified poly(ethylene glycol) with fusogenic liposomes

We present results on using cooperative interactions to shield liposomes by incorporating multiple hydrophobic anchoring sites on polyethylene glycol (PEG) polymers. The hydrophobically-modified PEGs (HMPEGs) are comb-graft polymers with strictly alternating monodisperse PEG blocks (M(w)=6, 12, or 35 kDa) bonded to C18 stearylamide hydrophobes. Cooperativity is varied by changing the degree of oligomerization at a constant ratio of PEG to stearylamide. Fusogenic liposomes prepared from N-C12-DOPE:DOPC 7:3 (mol:mol) were equilibrated with HMPEGs. Affinity for polymer association to liposomes increases with the degree of oligomerization; equilibrium constants (given as surface coverage per equilibrium concentration of free polymer) for 6 kDa PEG increased from 6.1+/-0.8 (mg/m(2))/(mg/ml) for 2.5 loops to 78.1+/-12.2 (mg/m(2))/(mg/ml) for 13 loops. In contrast, the equilibrium constant for distearoylphosphatidylethanolamine-poly(ethylene glycol) (DSPE-PEG5k) was 0.4+/-0.1 (mg/m(2))/(mg/ml).The multi-loop HMPEGs demonstrate higher levels of protection from complement binding than DSPE-PEG5k. Greater protection does not correlate with binding strength alone. The best shielding was by HMPEG6k-DP3 (with three 6 kDa PEG loops), suggesting that PEG chains with adequate surface mobility provide optimal protection from complement opsonization. Complement binding at 30 min and 12 h demonstrates that protection by multi-looped PEGs is constant whereas DSPE-PEG5k initially protects but presumably partitions off of the surface at longer times.     

Preparation and spectroscopic characterization of methoxy poly(ethylene glycol)-grafted water-soluble chitosan

The object of this study was to test the solubility of a methoxy poly(ethylene glycol) (MPEG)-grafted chitosan copolymer in organic solvents and aqueous solution. Water-soluble chitosan with low molecular weight (LMWSC) was used in a PEG-graft copolymerization. The MPEG was conjugated to chitosan using 4-dicyclohexylcarbodimide (DCC), and N-hydroxysuccimide (NHS). Introduction of PEG was confirmed by (1)H and (13)C NMR spectroscopy and FT-IR spectroscopy. The degree of substitution (DS) of MPEG into chitosan was calculated from (1)H NMR data and also by estimating the molecular weight (MW) using gel permeation chromatography (GPC). The DS values obtained from (1)H NMR spectroscopy and GPC were similar, indicating that MPEG-grafted LMWSC was synthesized and properly characterized. Furthermore, the introduction of PEG into chitosan increases the solubility in aqueous solutions over a range of pH values (4.0-11.0) and organic solvents such as DMF, DMSO, ethanol, and acetone.     

Poly(ethylene glycol)-grafted poly(3-hydroxyundecenoate) networks for enhanced blood compatibility

Poly(ethylene glycol)-grafted poly(3-hydroxyundecenoate) (PEG-g-PHU) networks were prepared by irradiating homogeneous solutions of poly(3-hydroxyundecenoate) (PHU) and the monoacrylate of poly(ethylene glycol) (PEG) with UV light. The resulting polymer networks were characterized by measuring the water contact angle, water uptake, and mechanical properties and by performing attenuated total reflectance infrared spectroscopy and scanning electron microscopy. These measurements showed that the PEG chains were present in polymer networks. Adsorption of blood proteins and platelets on cross-linked PHU (CLPHU) and PEG-g-PHU were examined using poly(L-lactide) (PLLA) surfaces as control. Blood proteins and platelets had significantly lower tendency of adhesion to surfaces composed of CLPHU and PEG-g-PHU networks than to PLLA. Blood compatibility of polymer networks increased as the fraction of grafted PEG increased. The results of this study suggest that PEG-g-PHU networks might be useful for blood-compatible biomedical applications.     

Physiochemical properties of low and high molecular weight poly(ethylene glycol)-grafted poly(ethylene imine) copolymers and their complexes with oligonucleotides

Inefficient delivery of antisense oligonucleotides (AOs) to target cell nuclei remains as the foremost limitation to their usefulness. Copolymers of cationic poly(ethylene imine) (PEI) and poly(ethylene glycol) (PEG) have been well-studied for delivery of plasmids. However, the properties of PEG-PEI-AO polyplexes have not been comprehensively investigated. Therefore, we synthesized a series of PEG-PEI copolymers and evaluated their physiochemical properties alone and when complexed with AO. The M(w) of PEG was found to be the main determinant of polyplex size, via its influence on particle aggregation. DLS measurements showed that when PEG5000 was grafted to PEI2K and PEI25K, polyplex diameters were extremely small (range 10-90 nm) with minimal aggregation. In contrast, when PEG550 was grafted to PEI2K and PEI25K, polyplexes appeared as much larger aggregates (approximately 250 nm). As expected, the surface charge (zeta potential) was higher for polyplexes containing PEI25K than those containing PEI2K, but decreased with increased levels of PEG grafting. Surprisingly, within the physiological range (pH 7.5-5), the buffering capacity of all copolymers was nearly equivalent to that of unsubstituted PEI2K or PEI25K, and was barely influenced by PEGylation. The stability of polyplexes was evaluated using a heparin polyanion competition assay. Unexpectedly, polyplexes containing PEI2K showed stability equal to or greater than that of PEI25K polyplexes. The level of PEG grafting also had a dramatic effect on polyplex stability. The relationships established between molecular formulations and polyplex size, aggregation, surface charge, and stability should provide a useful guide for future studies aimed at optimizing polymer-mediated AO delivery in cell and animal studies. A summary of the relationships between polyplex structures and recent studies of their transfection capacity is provided.     

Interfacial thickness of liposomes containing poly(ethylene glycol)-cholesterol from electrophoresis.

The electrophoretic mobilities of liposomes incorporating a polyethylene glycol (PEG) headgroup coupled to cholesterol for PEG of average chain index 3.0, 13.2, and 22.3 have been determined as a function of PEG-cholesterol mole fraction between 5% and 40% and ionic strength between 2 and 200 mM. The liposome compositions were 40 mole % cholesterol plus PEG-cholesterol, 10 mole % 1,2-dipalmitoyl-sn-glyerco-3-phosphoglycerol, and 50 mole % egg phosphatidylcholine. The mobilities were fit to a model in which the PEG forms a surface layer of polymer subject to viscous drag arising from electroosmotic flow within this layer. The model provides estimates of the average layer thickness that are comparable to those determined from contemporary models of surface-attached polymer.     

Photografted poly(ethylene glycol) matrix for affinity interaction studies

A poly(ethylene glycol) (PEG)-based matrix for studies of affinity interactions is developed and demonstrated. The PEG matrix, less than 0.1 microm thick, is graft copolymerized onto a cycloolefin polymer from a mixture of PEG methacrylates using a free radical reaction initiated by UV light at 254 nm. The grafting process is monitored in real time, and characteristics such as thickness, homogeneity, relative composition, photostability, and performance in terms of protein resistance in complex biofluids and sensor qualities are investigated with null ellipsometry, infrared spectroscopy, and surface plasmon resonance. The matrix is subsequently modified to contain carboxyl groups, thereby making it possible to immobilize ligands in a controlled and functional manner. Human serum albumin and fibrinogen are immobilized and successfully detected by antibody recognition using surface plasmon resonance. The results are encouraging and suggest that the PEG matrix is suitable for biochip and biosensor applications in demanding biofluids.     

The influence of poly(ethylene glycol) 6000 on spermine-induced aggregation of liposomes.

Poly(ethylene glycol) 6000 affected the aggregation of mixed liposomes induced by spermine. It lowered the concentration of spermine causing 50% maximal aggregation, accelerated the rate and increased the extent of aggregation. The effect was inversely proportional to the density of the acidic phospholipid in the vesicles. These effects were not due either to poly(ethylene glycol) 6000-induced permanent structural modification of the liposome or increased binding of spermine to the vesicles. These findings are discussed in relation to a decreased hydration force caused by the ability of poly(ethylene glycol) 6000 to alter the water of hydration of the phospholipid polar groups in the liposome.     

Effects of poly(ethylene glycol) on liposomes and erythrocytes: Permeability changes and membrane fusion

Poly(ethylene glycol) 6000 induced a concentration-dependent, time-dependent decrease in the latency of the reaction between Arsenazo III sequestered in liposomes and extraliposomal Ca²⁺. This was mediated by a gross change in liposomal permeability, i.e. by a release of Arsenazo III from liposomes rather than simply by an entry of Ca²⁺. The loss of latency was strongly temperature-dependent, and it was markedly diminished on increasing the cholesterol content of the liposomes. It was apparently not due to an osmotic stress of the polymer. The high activation energy found (63 kJ · mol^?1) is thought to indicate that the loss of latency resulted from local discontinuities in the lipid bilayers, caused by dehydration, rather than from partial or total lysis. Related microscopy experiments indicated that the polymer also caused the liposomes to fuse, and it is suggested that membrane fusion may have occurred at the sites of dehydration-induced discontinuities in adjacent bilayers, in addition the polymer was found to enhance the permeability of hen erythrocytes to Ca²⁺ in a manner that was comparable to its effect on liposomal latency, and it is proposed that cell fusion induced by poly(ethylene glycol) may occur at the sites of similarly induced discontinuities in the phospholipid bilayers of two closely adjacent cells.     

Mechanism of poly(ethylene glycol) interaction with proteins

Poly(ethylene glycol) (PEG) is one of the most useful protein salting-out agents. In this study, it has been shown that the salting-out effectiveness of PEG can be explained by the large unfavorable free energy of its interaction with proteins. Preferential interaction measurements of beta-lactoglobulin with poly(ethylene glycols) with molecular weights between 200 and 1000 showed preferential hydration of the protein for those with Mr greater than or equal to 400, the degree of hydration increasing with the increase in poly(ethylene glycol) molecular weight. The preferential interaction parameter had a strong cosolvent concentration dependence, with poly(ethylene glycol) 1000 having the sharpest decrease with an increase in concentration. The preferential hydration extrapolated to zero cosolvent concentration increased almost linearly with increasing size of the additive, suggesting steric exclusion as the major factor responsible for the preferential hydration. The poly(ethylene glycol) concentration dependence of the preferential interactions could be explained in terms of the nonideality of poly(ethylene glycol) solutions. All the poly(ethylene glycols) studied, when used at levels of 10-30%, decreased the thermal stability of beta-lactoglobulin, suggesting that caution must be exercised in the use of this additive at extreme conditions such as high temperature.     

Monoclonal antibody-based quantitation of poly(ethylene glycol)-derivatized proteins, liposomes, and nanoparticles

Covalent attachment of poly(ethylene glycol) (PEG) molecules to drugs, proteins, and liposomes is a proven technology for improving their bioavailability, safety, and efficacy. Qualitative and quantitative analysis of PEG-derivatized molecules is important for both drug development and clinical applications. We previously reported the development of a monoclonal IgM antibody (AGP3) to PEG. We now describe a new IgG1 monoclonal antibody (E11) to PEG and show that it can be used in combination with AGP3 to detect and quantify PEG-derivatized molecules. Both antibodies bound the repeating subunits of the PEG backbone and could detect free PEG and PEG-modified proteins by ELISA, immunoblotting, and flow cytometry. Detection sensitivity increased with the length and the number of PEG chains on pegylated molecules. Both antibodies also efficiently accelerated the clearance of a PEG-modified enzyme in vivo. A sandwich ELISA in which E11/AGP3 were employed as the capture/detection antibodies was developed to detect PEG-modified proteins at concentrations as low as 1.2 ng/mL. In addition, the ELISA could also quantify, in the presence of 10% fetal bovine serum, free methoxy-PEG20,000, PEG2,000-quantum dots, and PEG2,000-liposomes at concentrations as low as 20 ng/mL (1.0 nM), 1.4 ng/mL (3.1 pM), and 2.4 ng/mL (3.13 nM phospholipids), respectively. Finally, we show that the sandwich ELISA could accurately measured the in vivo half-life of a PEG-modified enzyme. These antibodies should be generally applicable to the qualitative and quantitative analysis of all PEG-derivatized molecules.     

Selective protein interactions with phosphatidylserine containing liposomes alter the steric stabilization properties of poly(ethylene glycol)

Incorporation of 5 mol% poly(ethylene glycol)-conjugated lipids (PEG-lipids) has been shown to extend the circulation longevity of neutral liposomes due to steric repulsion of PEG at the membrane surface. The effects of PEG-lipids on protein interactions with biologically reactive membranes were examined using phosphatidylserine (PS) containing liposomes as the model. Incorporating 15 mol% 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE)-PEG 2000 into PS liposomes resulted in circulation lifetimes comparable to that obtained with neutral liposomes containing 5 mol% DSPE-PEG 2000. These results suggested that 15 mol% DSPE-PEG 2000 may be effective in protecting PS liposomes from the high affinity, PS-mediated binding of plasma proteins. This was determined by monitoring the effects of PEG-lipids on calcium-mediated blood coagulation protein interactions with PS liposomes. Prothrombin binding and procoagulant activity of PS liposomes could be inhibited >80% when 15 mol% DSPE-PEG 2000 was used. These results are consistent with PS on membrane surfaces forming transient nucleation sites for protein binding that may result in lateral exclusion of PEG-lipids incorporated at <10 mol%. These nucleation sites may be inaccessible when PEG-lipids are present at elevated levels where they adopt a highly compressed brush conformation. This suggests that liposomes with reactive groups and PEG-lipids may be appropriately designed to impart selectivity to protein interactions with membrane surfaces.     

Probing protein nanopores with poly(ethylene glycol)s

Neutral water-soluble poly(ethylene glycol)s (PEGs) have been extensively explored in protein nanopore research for the past several decades. The principal use of PEGs is to investigate the membrane protein ion channel physical characteristics and transport properties. In addition, protein nanopores are used to study polymer–protein interactions and polymer physicochemical properties. In this review, we focus on the biophysical studies on probing protein ion channels with PEGs, specifically on nanopore sizing by PEG partitioning. We discuss the fluctuation analysis of ion channel currents in response to the PEGs moving within their confined geometries. The advantages, limitations, and recent developments of the approach are also addressed.     

Interaction of phospholipid membranes with poly(ethylene glycol)s

1. The water-soluble polymer, poly(ethylene glycol), causes concentration-dependent increases in the temperature of the gel--liquid crystalline phase transitions of aqueous dispersions of dipalmitoyl phosphatidylcholine and of dipalmitoyl phosphatidylethanolamine. 2. For dipalmitoyl phosphatidylcholine it has been further demonstrated that poly(ethylene glycol) increases the transition enthalpy and entropy while decreasing the cooperativity of the transition. 3. These results are discussed in relation to the possible modes of action of poly(ethylene glycol) in promoting cell fusion.     

Synthesis of oligo(poly(ethylene glycol) fumarate)

This protocol describes the synthesis of oligo(poly(ethylene glycol) fumarate) (OPF; 1-35 kDa; a polymer useful for tissue engineering applications) by a one-pot reaction of poly(ethylene glycol) (PEG) and fumaryl chloride. The procedure involves three parts: dichloromethane and PEG are first dried; the reaction step follows, in which fumaryl chloride and triethylamine are added dropwise to a solution of PEG in dichloromethane; and finally, the product solution is filtered to remove by-product salt, and the OPF product is twice crystallized, washed and dried under vacuum. The reaction is affected by the molecular weight of PEG and reactant molar ratio. The OPF product is cross-linked by radical polymerization by either a thermally induced or ultraviolet-induced radical initiator, and the physical properties of the OPF oligomer and resulting cross-linked hydrogel are easily tailored by varying PEG molecular weight. OPF hydrogels are injectable, they polymerize in situ and they undergo biodegradation by hydrolysis of ester bonds. The expected time required to complete this protocol is 6 d.     

Influence of poly(ethylene glycol) grafting density and polymer length on liposomes: Relating plasma circulation lifetimes to protein binding

The incorporation of poly(ethylene glycol) (PEG)-conjugated lipids in lipid-based carriers substantially prolongs the circulation lifetime of liposomes. However, the mechanism(s) by which PEG-lipids achieve this have not been fully elucidated. It is believed that PEG-lipids mediate steric stabilization, ultimately reducing surface-surface interactions including the aggregation of liposomes and/or adsorption of plasma proteins. The purpose of the studies described here was to compare the effects of PEG-lipid incorporation in liposomes on protein binding, liposome-liposome aggregation and pharmacokinetics in mice. Cholesterol-free liposomes were chosen because of their increasing importance as liposomal delivery systems and their marked sensitivity to protein binding and aggregation. Specifically, liposomes containing various molecular weight PEG-lipids at a variety of molar proportions were analyzed for in vivo clearance, aggregation state (size exclusion chromatography, quasi-elastic light scattering, cryo-transmission and freeze fracture electron microscopy) as well as in vitro and in vivo protein binding. The results indicated that as little as 0.5 mol% of 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine (DSPE) modified with PEG having a mean molecular weight of 2000 (DSPE-PEG₂₀₀₀) substantially increased plasma circulation longevity of liposomes prepared of 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC). Optimal plasma circulation lifetimes could be achieved with 2 mol% DSPE-PEG₂₀₀₀. At this proportion of DSPE-PEG₂₀₀₀, the aggregation of DSPC-based liposomes was completely precluded. However, the total protein adsorption and the protein profile was not influenced by the level of DSPE-PEG₂₀₀₀ in the membrane. These studies suggest that PEG-lipids reduce the in vivo clearance of cholesterol-free liposomal formulations primarily by inhibition of surface interactions, particularly liposome-liposome aggregation.     

Adsorption of poly(ethylene glycol)-modified ribonuclease A to a poly(lactide-co-glycolide) surface

Protein adsorption is a source of variability in the release profiles of therapeutic proteins from biodegradable microspheres. We employ optical reflectometry and total internal reflection fluorescence to explore the extent and kinetics of ribonuclease A (RNase A) adsorption to spin-cast films of poly(lactide-co-glycolide) (PLG) and, in particular, to determine how covalent grafting of polyethylene glycol (PEG) to RNase A affects adsorption. Adsorption kinetics on PLG surfaces are surface-limited for RNase A but transport-limited for unconjugated PEG homopolymers and for PEG-modified RNase A, indicating that PEG anchors the conjugates to the surface during the transport-limited regime. PEG modification of RNase A decreases the total number of adsorbed molecules per unit area but increases the areal surface coverage because the grafted PEG chains exclude additional surface area. Total internal reflection fluorescence-based exchange measurements show that there is no exchange between adsorbed and solution-phase protein molecules. This indicates an unusually tenacious adsorption. Streaming current measurements indicate that the zeta potential of the PLG surface becomes increasingly negative as the film is exposed to water for several weeks, as expected. Aging of the PLG surface results in increased adsorption of unmodified RNase A but decreased adsorption of unconjugated PEG homopolymers and of PEG-RNase A conjugates, relative to the extent of adsorption on freshly prepared PLG surfaces. Adsorption results correlate well with an increase in the rate, total extent and preservation of bioactivity of RNase A released from PLG microspheres for the PEG-modified version of RNase A.     

Influence of poly(ethylene glycol) grafting density and polymer length on liposomes: relating plasma circulation lifetimes to protein binding

The incorporation of poly(ethylene glycol) (PEG)-conjugated lipids in lipid-based carriers substantially prolongs the circulation lifetime of liposomes. However, the mechanism(s) by which PEG-lipids achieve this have not been fully elucidated. It is believed that PEG-lipids mediate steric stabilization, ultimately reducing surface-surface interactions including the aggregation of liposomes and/or adsorption of plasma proteins. The purpose of the studies described here was to compare the effects of PEG-lipid incorporation in liposomes on protein binding, liposome-liposome aggregation and pharmacokinetics in mice. Cholesterol-free liposomes were chosen because of their increasing importance as liposomal delivery systems and their marked sensitivity to protein binding and aggregation. Specifically, liposomes containing various molecular weight PEG-lipids at a variety of molar proportions were analyzed for in vivo clearance, aggregation state (size exclusion chromatography, quasi-elastic light scattering, cryo-transmission and freeze fracture electron microscopy) as well as in vitro and in vivo protein binding. The results indicated that as little as 0.5 mol% of 1,2-distearoyl-sn-glycero-3-phosphatidylethanolamine (DSPE) modified with PEG having a mean molecular weight of 2000 (DSPE-PEG(2000)) substantially increased plasma circulation longevity of liposomes prepared of 1,2-distearoyl-sn-glycero-3-phosphatidylcholine (DSPC). Optimal plasma circulation lifetimes could be achieved with 2 mol% DSPE-PEG(2000). At this proportion of DSPE-PEG(2000), the aggregation of DSPC-based liposomes was completely precluded. However, the total protein adsorption and the protein profile was not influenced by the level of DSPE-PEG(2000) in the membrane. These studies suggest that PEG-lipids reduce the in vivo clearance of cholesterol-free liposomal formulations primarily by inhibition of surface interactions, particularly liposome-liposome aggregation.