Enhancement of Nisin Production by <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp. <Emphasis Type="Italic">lactis</Emphasis>

Lactococcus lactis subsp lactis BSA (L. lactis BSA) was isolated from a commercial fermented product (BSA Food Ingredients, Montreal, Canada) containing mixed bacteria that are used as starter for food fermentation. In order to increase the bacteriocin production by L. lactis BSA, different fermentation conditions were conducted. They included different volumetric combinations of two culture media (the Man, Rogosa and Sharpe (MRS) broth and skim milk), agitation level (0 and 100 rpm) and concentration of commercial nisin (0, 0.15, and 0.30 µg/ml) added into culture media as stimulant agent for nisin production. During fermentation, samples were collected and used for antibacterial evaluation against Lactobacillus sakei using agar diffusion assay. Results showed that medium containing 50 % MRS broth and 50 % skim milk gave better antibacterial activity as compared to other medium formulations. Agitation (100 rpm) did not improve nisin production by L. lactis BSA. Adding 0.15 µg/ml of nisin into the medium-containing 50 % MRS broth and 50 % skim milk caused the highest nisin activity of 18,820 AU/ml as compared to other medium formulations. This activity was 4 and ~3 times higher than medium containing 100 % MRS broth without added nisin (~4700 AU/ml) and 100 % MRS broth with 0.15 µg/ml of added nisin (~6650 AU/ml), respectively.     

Improvement of nisin production in pH feed-back controlled,fed-batch culture by <Emphasis Type="Italic">Lactococcus lactis</Emphasis>subsp<Emphasis Type="Italic">. lactis</Emphasis>

Nisin production by Lactococcus lactis subsp. lactisin fed-batch culture was doubled by using a pH feed-back controlled method. Sucrose concentration was controlled at 10 g l^–1 giving 5010 IU nisin ml^–1 compared to 2660 IU nisin ml^–1 in batch culture.     

Production of nisin Z using <Emphasis Type="Italic">Lactococcus lactis</Emphasis> IO-1 from hydrolyzed sago starch

A membrane bioreactor for production of nisin Z was constructed using Lactococcus lactis IO-1 in continuous culture using hydrolyzed sago starch as carbon source. A strategy used to enhance the productivity of nisin Z was to maintain the cells in a continuous growth at high cell concentration. This resulted in a volumetric productivity of nisin Z, as 50,000 IU l⁻¹ h⁻¹ using a cell concentration of 15 g l⁻¹, 30^°C, pH 5.5 and a dilution rate of 1.24 h⁻¹. Adding 10 g l⁻¹ YE and 2 g l⁻¹ polypeptone, other inducers were unnecessary to maintain production of nisin. The operating conditions of the reactor removed nisin and lactate, thus minimizing their effects which allowed the maintenance of cells in continuous exponential growth phase mode with high metabolic activity.     

Continuous nisin production with bioengineered <Emphasis Type="Italic">Lactococcus lactis</Emphasis> strains

Nisin production in continuous cultures of bioengineered Lactococcus lactis strains that incorporate additional immunity and regulation genes was studied. Highest nisin activities were observed at 0.2 h^–1 dilution rate and 12.5 g l^–1 fructose concentration for all strains. Recombinant strains were able to produce greater amounts of nisin at dilution rates below 0.3 h⁻¹ compared to the control strain. However, this significant difference disappeared at dilution rates of 0.4 and 0.5 h^–1. For the strains LL27, LAC338, LAC339, and LAC340, optimum conditions for nisin production were determined to be at 0.29, 0.26, 0.27, and 0.27 h^–1 dilution rates and 11.95, 12.01, 11.63, and 12.50 g l^–1 fructose concentrations, respectively. The highest nisin productivity, 496 IU ml^–1 h^–1, was achieved with LAC339. The results of this study suggest that low dilution rates stabilize the high specific nisin productivity of the bioengineered strains in continuous fermentation. Moreover, response surface methodology analysis showed that regulation genes yielded high nisin productivity at wide ranges of dilution rates and fructose concentrations.     

Cycle changing the medium results in increased nisin productivity per cell in <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

High specific cellular nisin production was aimed by cycle changing the medium of Lactococcus lactis N8 and LAC48. The highest level of nisin production was reached with the 120 min cycles but maximal production was unstable. In shorter cycles (30 and 60 min) cells could be maintained in a high production state up to the end of the fermentation (28 and 14 cycles). N8 produced 19-fold and LAC48 15-fold more nisin with cycle changing the medium than without cycle incubation.     

Production of nisin with continuous adsorption to Amberlite XAD-4 resin using<Emphasis Type="Italic"> Lactococcus lactis</Emphasis> N8 and<Emphasis Type="Italic"> L. lactis</Emphasis> LAC48

The production of nisin, biomass and lactic acid in pH-controlled and uncontrolled batch fermentation and batch fermentation (pH 5.5) with continuous removal of nisin was examined in the parent strain Lactococcus lactis N8 and LAC48. Strain LAC48 in batch fermentor (pH not controlled) gave a maximum nisin concentration of 2.5×10⁶ IU g dcw^–1. The nisin concentration remained high (2.0×10⁶ IU g dcw^–1) after the logarithmic growth phase (10–22 h), whereas nisin production of strain N8 decreased after the logarithmic growth phase. The maximum nisin production of strain LAC48 was not directly related to the biomass formation and not associated with growth. In order to study end product inhibition in nisin production, a system was built for adsorption of nisin during fermentation. The adsorbent Amberlite XAD-4 was found to have an effective binding capacity for nisin. Cells of LAC48 and N8 compensated for the removal of nisin, indicating that nisin production also occurs in the stationary phase.     

Characterization of Lactic Acid Bacteria Coexisting with a Nisin Z Producer in <Emphasis Type="Italic">Tsuda</Emphasis>-Turnip Pickles

Bacteriocin-producing lactic acid bacteria (LAB) are believed to be associated with many types of fermented food. The present study reports the identification of lactic acid bacterium MS27 producing a bacteriocin isolated from the Tsuda-turnip pickle, which is a Japanese fermented food, and characterization of LAB coexisting with the bacteriocin producers in the Tsuda-turnip pickle. The strain MS27 was identified as Lactococcus lactis subsp. lactis based on a partial 16S rRNA gene sequence and sugar fermentation pattern analyses. Mass spectroscopy and genetic analysis revealed that it produces nisin Z. Microbial population analysis revealed that the LAB community in the Tsuda-turnip pickle comprises nisin Z-sensitive and nisin Z-insensitive LAB (nonbacteriocin producers) and nisin Z producers at population rates of 52.5%, 37.5%, and 10.0%, respectively. This revealed that Leuconostoc spp. (nisin Z insensitive) is the dominant species among LAB microflora and that nisin Z insensitivity of a bacterial strain is proportional to its ability to dominate the population in Tsuda-turnip pickles. Competitive growth assay revealed that Leuconostoc spp. considerably suppressed the bacteriocin production of L. lactis MS27. These results suggested that Leuconostoc spp. contributes to the formation of the LAB community with a wide variety of microorganisms in Tsuda-turnip pickles.     

Production of a thermophilic maltooligosyl-trehalose synthase in <Emphasis Type="Italic">Lactococcus lactis</Emphasis>

The thermoacidophilic archaeon Sulfolobus solfataricus MT4 encodes a maltooligosyltrehalose synthase (MTS), that catalyzes an intramolecular transglycosylation process converting the glycosidic linkages at the reducing end of dextrins from alpha-1,4 into alpha-1,1. In this research the gene encoding MTS was cloned and expressed in Lactococcus lactis NZ9000 using the so-called NICE system. Growth conditions of the recombinant strain were optimized in flask experiments in relation to enzyme production. Batch experiments in 2 L-fermenters were performed on the best identified semidefined medium and 256 U L(-1) of recombinant MTS were produced. Purified recombinant MTS shows its optimal activity at 70 degrees C and pH 5.5, prefers maltoheptaose and maltohexaose as substrates, and demonstrates minimal side hydrolytic activity.     

Influence of growth conditions on the nisin production of bioengineered <Emphasis Type="Italic">Lactococcus lactis</Emphasis> strains

Nisin production of three bioengineered strains, (LAC338, LAC339 and LAC340) with immunity (nisFEG) and/or regulation (nisRK) genes of nisin biosynthesis on plasmids in the Lactococcus lactis LL27 nisin producer, was evaluated under pH-controlled and pH-uncontrolled batch fermentations. Optimization studies showed that fructose and yeast extract yielded the highest nisin activity. The strains LAC338, LAC339, and LAC340 produced 24, 45, and 44% more nisin, respectively, than wild-type L. lactis LL27 after 12-h incubation. However, sharp decreases in the yield of nisin were observed at the late phase of fermentation with LAC339 and LL27 in contrast to LAC340 and LAC338 strains for which the high level of nisin could be maintained longer. Obviously, increasing the copy number of the regulation genes together with immunity genes in the nisin producers retarded the loss of nisin in the late phase of the fermentation.     

Engineering dehydrated amino acid residues in the antimicrobial peptide nisin.

The small antimicrobial peptide nisin, produced by Lactococcus lactis, contains the uncommon amino acid residues dehydroalanine and dehydrobutyrine and five thio ether bridges. Since these structures are posttranslationally formed from Ser, Thr, and Cys residues, it is feasible to study their role in nisin function and biosynthesis by protein engineering. Here we report the development of an expression system for mutated nisin Z (nisZ) genes, using nisin A producing L. lactis as a host. Replacement by site-directed mutagenesis of the Ser-5 codon in nisZ by a Thr codon, led to a mutant with a dehydrobutyrine instead of a dehydroalanine residue at position 5, as shown by NMR. Its antimicrobial activity was 2-10-fold lower relative to wild-type nisin Z, depending on the indicator strain used. In another mutagenesis study a double mutation was introduced in the nisZ gene by replacing the codons for Met-17 and Gly-18 by codons for Gln and Thr, respectively, as in the third lanthionine ring of the related antimicrobial peptide subtilin from Bacillus subtilis. This resulted in the simultaneous production of two mutant species, one containing a Thr residue and the other containing a dehydrobutyrine residue at position 18, both having different bacteriocidal properties.     

Characterization of <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp. <Emphasis Type="Italic">lactis</Emphasis> isolated from surface waters

A group of nine presumptive enterococci was isolated on enterococcal selective media Slanetz-Bartley agar and/or kanamycin-esculin-azide agar during a screening of Enterococcus spp. in surface waters. All strains formed a homogeneous cluster separated from all enterococcal species using rep-PCR fingerprinting with the (GTG)(5) primer but they matched fingerprints revealed by Lactococcus lactis subsp. lactis representatives. Further identification using extensive biotyping and automated ribotyping with EcoRI (RiboPrinter(R) microbial characterization system) confirmed all strains as L. lactis subsp. lactis in full correspondence with the (GTG)(5)-PCR. We demonstrated that L. lactis subsp. lactis strains occur in different surface waters and can be confused with enterococci due to their positive growth on selective enterococcal media as well as positive results in tests commonly used for identification of the genus Enterococcus (esculin hydrolysis, acetoin and pyrrolidonyl arylamidase production, growth at 10 degrees C and in 6.5% NaCl). The (GTG)(5)-PCR fingerprinting was revealed as a reliable and fast method for the identification of L. lactis subsp lactis while automated ribotyping with EcoRI proved to be a good tool for intrasubspecies typing purposes.     

Identification and Characteristics of Nisin Z-Producing <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp. <Emphasis Type="Italic">lactis</Emphasis> Isolated from Kimchi

We isolated bacteriocin-producing Lactococcus lactis subsp. lactis from Kimchi. The bacteriocin inhibited strains of Clostridium perfringens, C. difficile, Listeria monocytogenes, vancomycin-resistant Enterococcus, and one out of four methicillin-resistant Staphylococcus aureus strains, as well as some closely related lactic acid bacteria. In tricine-SDS-PAGE, the bacteriocin migrated with an apparent molecular weight of about 4 kDa to the same location as nisin A and crude nisin Z. The gene encoding this bacteriocin was found to be identical to that of nisin Z with direct PCR sequence methods. The inhibitory activity was stable against heat and pH, but it was lost at 100°C for 1 h and at 121°C for 15 min. The bacteriocin was inactivated by proteolytic enzymes, but was not affected by lysozyme, lipase, catalase, or β-glucosidase. There were some differences in characteristics from those of nisins described previously. Received: 21 June 2002 / Accepted: 22 July 2002     

Phenotypic diversity and technological properties of <Emphasis Type="Italic">Bacillus subtilis</Emphasis> species isolated from <Emphasis Type="Italic">okpehe</Emphasis>, a traditional fermented condiment

The Bacillus subtilis wild strains isolated from okpehe, a traditional fermented condiment used as seasoning in Nigeria, the reference and typed strains were investigated for their phenotypic diversity and their technological parameters with a view to obtain adequate data that would enable selection of appropriated starter cultures for vegetable protein fermentation in West Africa. All the 7 strains studied demonstrated diverse phenotypic characteristics and they were identified as Bacillus subtilis, based on the API 50 CHB combined with API 20E profile. Specific sugars that indicated a good hydrolytic potential of the wild strains were fermented. The highest proteinase activity of 90 AU/ml determined quantitatively was observed in the strain Bacillus subtilis BFE 5372, the proteinase was identified by the APIZYM gallery as chymotrypsin. Highest amylase activity of 13 AU/ml was noticed in strain Bacillus subtilis DSM 347 while only 4 strains produced polyglutamic acid with the strain Bacillus subtilis BFE 5359 producing the highest polyglutamate activity of 2.5 mm. Although strain Bacillus subtilis BFE 5301 did not release detectable polyglutamate, the strain demonstrated antagonism against different bacteria and the antimicrobial substance produced by strain Bacillus subtilis BFE 5301 was confirmed as a bacteriocin since its activities were lost after treatment with chymotrypsin and pepsin. The data generated showed the technological parameters that can aid selection of wild strains such as Bacillus subtilis BFE 5301, BFE 5359 and BFE 5372 for optimization of condiment production.     

Novel Production of Isochainin by a Strain of <Emphasis Type="Italic">Streptomyces </Emphasis>sp<Emphasis Type="Italic">.</Emphasis> Isolated from Rhizosphere Soil of the Indigenous Moroccan Plant <Emphasis Type="Italic">Argania Spinosa</Emphasis> L

Summary An actinomycete strain (designated Ap1) isolated from the rhizosphere soil of Argania spinosa L. strongly inhibited the growth of two plant pathogens: Fusarium oxysporum f.sp. albedinis and Verticillium dahliae. The spore morphology suggested that the Ap1 strain belonged to the genus Streptomyces. The antifungal compound produced by Ap1 was purified by HPLC and identified as the polyene macrolide, isochainin, by NMR and mass spectroscopy. Ap1 showed normal biosynthesis of isochainin in comparison with S. cellulosae ATTC 12625, in which precursor-directed biosynthesis by feeding ethyl (Z)-16-phenylhexadec-9-enoate to the culture medium is required. In addition, Streptomyces sp. strain Ap1 produces isochainin with a 6.5-fold higher concentration than Streptomyces cellulosae ATTC 12625.     

Investigation of the antibiotic complex produced by <Emphasis Type="Italic">Lactococcus lactis</Emphasis> subsp. <Emphasis Type="Italic">lactis</Emphasis> 194, Variant K

Phase variation in the culture of the environmental strain Lactococcus lactis subsp. lactis 194 resulted in the formation of two types of colonies differing by 15% in antibiotic activity. The active variant 194-K produced an antibiotic complex with a broad spectrum of antibacterial and antifungal activity. Five components (194-A, B, C, D, and E) were isolated from the complex by solid-phase extraction and thin-layer chromatography. Components 194-A and 194-B were hydrophobic neutral compounds soluble in organic solvents. Component 194-A possessed fungicidal activity, whereas component 194-B exhibited only bactericidal activity. Physicochemical studies of the isolated components 194-A and 194-B revealed that they had no analogs in the Berdy database of biologically active substances (BNPD) and appeared to be novel antibiotics. Component 194-C was a hydrophilic polar compound inhibiting growth of gram-positive and gramnegative bacteria. Component 194-D belonged to peptide antibiotics; it inhibited growth of only gram-positive bacteria and was similar to nisin A in biological properties but differed in electrophoretic mobility and molecular mass.     

Double deletion of <Emphasis Type="Italic">dtsR1</Emphasis> and <Emphasis Type="Italic">pyc</Emphasis> induce efficient <Emphasis Type="SmallCaps">l</Emphasis>-glutamate overproduction in <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis>

Corynebacterium glutamicum strains are used for the fermentative production of l-glutamate. Five C. glutamicum deletion mutants were isolated by two rounds of selection for homologous recombination and identified by Southern blot analysis. The growth, glucose consumption and glutamate production of the mutants were analyzed and compared with the wild-type ATCC 13032 strain. Double disruption of dtsR1 (encoding a subunit of acetyl-CoA carboxylase complex) and pyc (encoding pyruvate carboxylase) caused efficient overproduction of l-glutamate in C. glutamicum; production was much higher than that of the wild-type strain and ΔdtsR1 strain under glutamate-inducing conditions. In the absence of any inducing conditions, the amount of glutamate produced by the double-deletion strain ΔdtsR1Δpyc was more than that of the mutant ΔdtsR1. The activity of phosphoenolpyruvate carboxylase (PEPC) was found to be higher in the ΔdtsR1Δpyc strain than in the ΔdtsR1 strain and the wild-type strain. Therefore, PEPC appears to be an important anaplerotic enzyme for glutamate synthesis in ΔdtsR1 derivatives. Moreover, this conclusion was confirmed by overexpression of ppc and pyc in the two double-deletion strains (ΔdtsR1Δppc and ΔdtsR1Δpyc), respectively. Based on the data generated in this investigation, we suggest a new method that will improve glutamate production strains and provide a better understanding of the interaction(s) between the anaplerotic pathway and fatty acid synthesis.     

Overexpression of the <Emphasis Type="Italic">plg</Emphasis>1 gene encoding pectin lyase in <Emphasis Type="Italic">Penicillium griseoroseum</Emphasis>

The pectin lyase (PL) is an industrially important enzyme since it is used for maceration and clarification in the process of fruit juice production in food industries. In order to increase the yields of pectin lyase we cloned the plg1 (pectin lyase 1) from Penicillium griseoroseum gene under the control of the strong constitutive promoter of the glyceraldehyde-3-phosphate dehydrogenase gene (gpdA) and the terminator region of the tryptophan synthetase (trpC) gene from Aspergillus nidulans (plasmid pAN52-Plg1) and transformed this construct into the P. griseoroseum strain PG63. One of the pAN52-Plg1 multi-copy transformants (strain 105) grown in culture medium containing glucose or sugar cane juice showed PL activities of 4,804 or 5,202 U ml⁻¹ respectively, which represented 57- and 132-fold increases. In addition, the apparent specific activity of PL produced by this strain was much higher than the one observed for a commercial pectinase preparation. Evaluation of the extracellular proteins in the culture supernatant of strain 105 by SDS-PAGE showed the presence of a clear and strong band of approximately 40 kDa that probably corresponds to PL. The enzyme yields reported here demonstrate that the system we developed is able to express pectin lyase at levels comparable to, or exceeding, previously reported data.     

<Emphasis Type="SmallCaps">d</Emphasis>-Psicose production from <Emphasis Type="SmallCaps">d</Emphasis>-fructose using an isolated strain, <Emphasis Type="Italic">Sinorhizobium</Emphasis> sp.

Sinorhizobium sp., which can convert d-fructose into d-psicose, was isolated from soil. The optimal pH, temperature, and cell concentration for d-psicose production with the isolated strain were 8.5, 40°C, and 60 mg/ml, respectively. The toluene-treated cells showed 2.5- and 4.8-fold increases in the d-psicose concentration and productivity compared with untreated washed cells. Under the optimal conditions, the toluene-treated cells produced 37 g d-psicose/l from 70% (w/v) (3.9 M) d-fructose after 15 h.