Phenylboronate chromatography selectively separates glycoproteins through the manipulation of electrostatic,charge transfer,and cis‐diol interactions

Phenylboronate chromatography (PBC) has been applied for several years, however details regarding the mechanisms of interactions between the ligand and biomolecules are still scarce. The goal of this work is to investigate the various chemical interactions between proteins and their ligands, using a protein library containing both glycosylated and nonglycosylated proteins. Differences in the adsorption of these proteins over a pH range from 4 to 9 were related to two main properties: charge and presence of glycans. Acidic or neutral proteins were strongly adsorbed below pH 8 although the uncharged trigonal form of phenylboronate (PB) is less susceptible to forming electrostatic and cis‐diol interactions with proteins. The glycosylated proteins were only adsorbed above pH 8 when the electrostatic repulsion between the boronate anion and the protein surface was mitigated (at 200 mM NaCl). All basic proteins were highly adsorbed above pH 8 with PB also acting as a cation‐exchanger with binding occurring through electrostatic interactions. Batch adsorption performed at acidic conditions in the presence of Lewis base showed that charge‐transfer interactions are critical for protein retention. This study demonstrates the multimodal interaction of PBC, which can be a selective tool for separation of different classes of proteins.     

Effect of Acetylation of Ovalbumin on Its Adsorption Behavior at Solid/Liquid Interface

This paper reports the effect of modification of lysine residues on the adsorption of ovalbumin at alumina/water interface. It has been shown that the pH dependence of the adsorption changes on acetylation of lysine. Thus at pH 7.6 acetylated ovalbumin does not show any affinity for alumina surface although unmodified protein does. It seems that although electrostatic interactions are operative, surface unfolding of proteins and surface hydrophobicity of protein also control the adsorption of ovalbumin onto alumina.     

A shortcut method for evaluation of protein deposition onto the membrane surface in crossflow ultrafiltration

In this study, a procedure for quantifying the surface deposition of proteins in crossflow ultrafiltration has been developed. The procedure consists of determining the protein adsorption behavior onto the membrane surface from a few dynamic measurements performed in a nonfiltration and a filtration mode, and evaluating the concentration polarization (CP) layer thickness based on the adsorption data. To predict the interdependence between the protein adsorption and CP, a simplified mathematical model has been formulated. The model was used to assess the protein adsorption and thus yield reduction in the ultrafiltration process at different protein concentration in the solution. As a case study, ultrafiltration of aqueous solutions of BSA and lysozyme (LYZ) was examined on a polyethersulfone membrane with the molecular weight cutoff of 10 or 100 kDa. The protein concentration in the solutions varied within a relatively low concentration range, i.e. below 10 mg mL^?1, characteristic for solvent exchange between sequential operations of protein purification by chromatography and extraction. Both proteins markedly differed in the mechanism of surface deposition; for BSA hydrophobic interactions were suggested to be dominant, whereas in case of LYZ electrostatic interactions contributed the most to the deposition mechanism. The effect of additives of the protein solutions, i.e. inorganic salts, PEG, and urea depended on the adsorption mechanism and was also specific for each protein. Nevertheless, the proposed procedure performed well in the evaluation of surface deposition and yield reduction, regardless of the protein type and its solvent environment.     

Specific anchoring modes of two distinct dystrophin rod sub-domains interacting in phospholipid Langmuir films studied by atomic force microscopy and PM-IRRAS

Dystrophin rod repeats 1-3 sub-domain binds to acidic phosphatidylserine in a small vesicle binding assay, while the repeats 20-24 sub-domain does not. In the present work, we studied the adsorption behaviour of both sub-domains at the air/liquid interface and at the air/lipid interface in a Langmuir trough in order to highlight differences in interfacial properties. The adsorption behaviour of the two proteins at the air/liquid interface shows that they display surface activity while maintaining their alpha-helical secondary structure as shown by PM-IRRAS. Strikingly, R20-24 needs to be highly hydrated even at the interface, while this is not the case for R1-3, indicating that the surface activity is dramatically higher for R1-3 than R20-24. Surface-pressure measurements, atomic force microscopy and PM-IRRAS are used in a Langmuir experiment with DOPC-DOPS monolayers at two different surface pressures, 20 mN/m and 30 mN/m. At the lower surface pressure, the proteins are adsorbed at the lipid film interface while maintaining its alpha-helical structure. After an increase of the surface pressure, R1-3 subsequently produces a stable film, while R20-24 induces a reorganization of the lipid film with a subsequent decrease of the surface pressure close to the initial value. AFM and PM-IRRAS show that R1-3 is present in high amounts at the interface, being arranged in clusters representing 3.3% of the surface at low pressure. By contrast, R20-24 is present at the interface in small amounts bound only by a few electrostatic residues to the lipid film while the major part of the molecule remains floating in the sub-phase. Then for R1-3, the electrostatic interaction between the proteins and the film is enhanced by hydrophobic interactions. At higher surface pressure, the number of protein clusters increases and becomes closer in both cases implying the electrostatic character of the binding. These results indicate that even if the repeats exhibit large structural similarities, their interfacial properties are highly contrasted by their differential anchor mode in the membrane. Our work provides strong support for distinct physiological roles for the spectrin-like repeats and may partly explain the effects of therapeutic replacement of dystrophin deficiency by minidystrophins.     

Structural Determinants for Protein adsorption/non-adsorption to Silica Surface

The understanding of the mechanisms involved in the interaction of proteins with inorganic surfaces is of major interest in both fundamental research and applications such as nanotechnology. However, despite intense research, the mechanisms and the structural determinants of protein/surface interactions are still unclear. We developed a strategy consisting in identifying, in a mixture of hundreds of soluble proteins, those proteins that are adsorbed on the surface and those that are not. If the two protein subsets are large enough, their statistical comparative analysis must reveal the physicochemical determinants relevant for adsorption versus non-adsorption. This methodology was tested with silica nanoparticles. We found that the adsorbed proteins contain a higher number of charged amino acids, particularly arginine, which is consistent with involvement of this basic amino acid in electrostatic interactions with silica. The analysis also identified a marked bias toward low aromatic amino acid content (phenylalanine, tryptophan, tyrosine and histidine) in adsorbed proteins. Structural analyses and molecular dynamics simulations of proteins from the two groups indicate that non-adsorbed proteins have twice as many π-π interactions and higher structural rigidity. The data are consistent with the notion that adsorption is correlated with the flexibility of the protein and with its ability to spread on the surface. Our findings led us to propose a refined model of protein adsorption.     

Kinetics of protein adsorption and desorption on surfaces with grafted polymers

The kinetics of protein adsorption are studied using a generalized diffusion approach which shows that the time-determining step in the adsorption is the crossing of the kinetic barrier presented by the polymers and already adsorbed proteins. The potential of mean-force between the adsorbing protein and the polymer-protein surface changes as a function of time due to the deformation of the polymer layers as the proteins adsorb. Furthermore, the range and strength of the repulsive interaction felt by the approaching proteins increases with grafted polymer molecular weight and surface coverage. The effect of molecular weight on the kinetics is very complex and different than its role on the equilibrium adsorption isotherms. The very large kinetic barriers make the timescale for the adsorption process very long and the computational effort increases with time, thus, an approximate kinetic approach is developed. The kinetic theory is based on the knowledge that the time-determining step is crossing the potential-of-mean-force barrier. Kinetic equations for two states (adsorbed and bulk) are written where the kinetic coefficients are the product of the Boltzmann factor for the free energy of adsorption (desorption) multiplied by a preexponential factor determined from a Kramers-like theory. The predictions from the kinetic approach are in excellent quantitative agreement with the full diffusion equation solutions demonstrating that the two most important physical processes are the crossing of the barrier and the changes in the barrier with time due to the deformation of the polymer layer as the proteins adsorb/desorb. The kinetic coefficients can be calculated a priori allowing for systematic calculations over very long timescales. It is found that, in many cases where the equilibrium adsorption shows a finite value, the kinetics of the process is so slow that the experimental system will show no adsorption. This effect is particularly important at high grafted polymer surface coverage. The construction of guidelines for molecular weight/surface coverage necessary for kinetic prevention of protein adsorption in a desired timescale is shown. The time-dependent desorption is also studied by modeling how adsorbed proteins leave the surface when in contact with a pure water solution. It is found that the kinetics of desorption are very slow and depend in a nonmonotonic way in the polymer chain length. When the polymer layer thickness is shorter than the size of the protein, increasing polymer chain length, at fixed surface coverage, makes the desorption process faster. For polymer layers with thickness larger than the protein size, increases in molecular weight results in a longer time for desorption. This is due to the grafted polymers trapping the adsorbed proteins and slowing down the desorption process. These results offer a possible explanation to some experimental data on adsorption. Limitations and extension of the developed approaches for practical applications are discussed.     

A study of the nature of plasma protein adsorption on the surface of perfluorocarbon emulsions stabilized by different triblock copolymers

The composition of plasma proteins adsorbed on the surface of perfluorocarbon emulsions stabilized by different triblock copolymers and their quantitative ratio were analyzed. The results allowed us to describe three types of protein adsorption on the surface of emulsion droplets. Opsonin proteins prevailed during the first type of adsorption. Their adsorption occurred on a dense and inactive layer of triblock copolymers. The second type of adsorption occurred due to the hydrophobic effect on a dense and mobile layer, with low-molecular-weight proteins being predominantly adsorbed (monoadsorption). The third type of adsorption occurred on a loose layer of triblock copolymers. In this case, the adsorption of a large amount of proteins with a molecular weight of 10–500 kDa was observed, while the total molecular weight was distributed over a large number of proteins.     

Lipid demixing and protein-protein interactions in the adsorption of charged proteins on mixed membranes

The adsorption free energy of charged proteins on mixed membranes, containing varying amounts of (oppositely) charged lipids, is calculated based on a mean-field free energy expression that accounts explicitly for the ability of the lipids to demix locally, and for lateral interactions between the adsorbed proteins. Minimization of this free energy functional yields the familiar nonlinear Poisson-Boltzmann equation and the boundary condition at the membrane surface that allows for lipid charge rearrangement. These two self-consistent equations are solved simultaneously. The proteins are modeled as uniformly charged spheres and the (bare) membrane as an ideal two-dimensional binary mixture of charged and neutral lipids. Substantial variations in the lipid charge density profiles are found when highly charged proteins adsorb on weakly charged membranes; the lipids, at a certain demixing entropy penalty, adjust their concentration in the vicinity of the adsorbed protein to achieve optimal charge matching. Lateral repulsive interactions between the adsorbed proteins affect the lipid modulation profile and, at high densities, result in substantial lowering of the binding energy. Adsorption isotherms demonstrating the importance of lipid mobility and protein-protein interactions are calculated using an adsorption equation with a coverage-dependent binding constant. Typically, at bulk-surface equilibrium (i.e., when the membrane surface is "saturated" by adsorbed proteins), the membrane charges are "overcompensated" by the protein charges, because only about half of the protein charges (those on the hemispheres facing the membrane) are involved in charge neutralization. Finally, it is argued that the formation of lipid-protein domains may be enhanced by electrostatic adsorption of proteins, but its origin (e.g., elastic deformations associated with lipid demixing) is not purely electrostatic.     

Kinetics and thermodynamics of protein adsorption: a generalized molecular theoretical approach

The thermodynamics and kinetics of protein adsorption are studied using a molecular theoretical approach. The cases studied include competitive adsorption from mixtures and the effect of conformational changes upon adsorption. The kinetic theory is based on a generalized diffusion equation in which the driving force for motion is the gradient of chemical potentials of the proteins. The time-dependent chemical potentials, as well as the equilibrium behavior of the system, are obtained using a molecular mean-field theory. The theory provides, within the same theoretical formulation, the diffusion and the kinetic (activated) controlled regimes. By separation of ideal and nonideal contributions to the chemical potential, the equation of motion shows a purely diffusive part and the motion of the particles in the potential of mean force resulting from the intermolecular interactions. The theory enables the calculation of the time-dependent surface coverage of proteins, the dynamic surface tension, and the structure of the adsorbed layer in contact with the approaching proteins. For the case of competitive adsorption from a solution containing a mixture of large and small proteins, a variety of different adsorption patterns are observed depending upon the bulk composition, the strength of the interaction between the particles, and the surface and size of the proteins. It is found that the experimentally observed Vroman sequence is predicted in the case that the bulk solution is at a composition with an excess of the small protein, and that the interaction between the large protein and the surface is much larger than that of the smaller protein. The effect of surface conformational changes of the adsorbed proteins in the time-dependent adsorption is studied in detail. The theory predicts regimes of constant density and dynamic surface tension that are long lived but are only intermediates before the final approach to equilibrium. The implications of the findings to the interpretation of experimental observations is discussed.     

Measurements of interbilayer forces and protein adsorption on uncharged lipid bilayers displaying poly(ethylene glycol) chains

Poly(ethylene glycol) (PEG)-stabilized liposomes were recently shown to exhibit differences in cell uptake that were linked to the liposome charge. To determine the differences and similarities between charged and uncharged PEG-decorated liposomes, we directly measured the forces between two supported, neutral bilayers with terminally grafted PEG chains. The measurements were performed with the surface force apparatus. The force profiles were similar to those measured with negatively charged PEG conjugates of 1, 2-distearoyl-sn-glycero-3-phosphatidyl ethanolamine (DSPE), except that they lacked the longer ranged electrostatic repulsion observed with the charged compound. Theories for simple polymers describe the forces between end-grafted polymer chains on neutral bilayers. The force measurements were complemented by surface plasmon resonance studies of protein adsorption onto these layers. The lack of electrostatic forces reduced the adsorption of positively charged proteins and enhanced the adsorption of negatively charged ones. The absence of charge also allowed us to determine how membrane charge and the polymer grafting density independently affect protein adsorption on the coated membranes. Such studies suggest the physical basis of the different interactions of charged and uncharged liposomes with proteins and cells.     

Protein-surface interactions

This article describes an energy-based approach to protein adsorption, focusing on the energies involved in the interactions between a protein and a surface. Mathematical modeling and simulation based on this approach allow an improved understanding of the conditions that favor or prevent adsorption of a protein onto a surface and that can play a significant role in the design of material surfaces that interact with biological tissues according to specific needs. Biocompatibility with respect to fluids in motion, such as blood, is the main foreseeable application of our work. The considered energies are the van der Waals energy, the electrostatic energy, and the hydrophobic or hydrophilic energy. Moreover, the motion of the medium in which particles are immersed is also taken into account, considering the drag effect of the motion of the fluid on the particle, leading to a kinetic contribution to the total energy. It is shown that the adsorption behavior is not mainly determined by the van der Waals energy and by the double layer energy, but that a significant role is also played by the hydrophobic or hydrophilic energy. These results support the findings of experimental studies.     

Optical biosensor investigation of interactions of biomembrane and water-soluble cytochromes P450 and their redox partners with covalently immobilized phosphatidylethanolamine layers

A phospholipid-containing biochip was created by covalently immobilizing phospholipids on the optical biosensor's aminosilane cuvette and employed to monitor the interactions of the membrane and water-soluble proteins in cytochrome P450-containing monooxygenase systems with planary layers of dilauroylphosphatidylethanolamine (DLPE) and distearoylphosphatidylethanolamine (DSPE), differing in acyl chain length. It was shown that the full-length membrane proteins-cytochrome P4502B4 (d-2B4), cytochrome b5 (d-b5) and NADPH-cytochrome P450 reductase (d-Fp)-readily incorporated into the phospholipids. The incorporation was largely due to hydrophobic interactions of membranous protein fragments with the phospholipid layer. However, electrostatic forces were also but not always involved in the incorporation process. They promoted d-Fp incorporation but had no effect on d-b5 incorporation. In low ionic strength buffer, no incorporation of these two proteins into the DSPE lipid layer was observable. Incorporation of d-b5 into the DLPE layer was abruptly increased at temperatures exceeding phospholipid phase transition point. Incorporation of d-2B4 was dependent on its aggregation state and decreased with increasing protein aggregability. Water-soluble proteins either would not interact with the phospholipid layer (adrenodoxin) or would bind to the layer at the cost of only electrostatic (albumin) or both electrostatic and hydrophobic (P450cam) interactions.     

Electrostatic rate enhancement and transient complex of protein-protein association

The association of two proteins is bounded by the rate at which they, via diffusion, find each other while in appropriate relative orientations. Orientational constraints restrict this rate to approximately 10(5)-10(6) M(-1) s(-1). Proteins with higher association rates generally have complementary electrostatic surfaces; proteins with lower association rates generally are slowed down by conformational changes upon complex formation. Previous studies (Zhou, Biophys J 1997;73:2441-2445) have shown that electrostatic enhancement of the diffusion-limited association rate can be accurately modeled by $k_{\bf D}$ = $k_{D}0\ {exp} ( - \langle U_{el} \rangle;{\star}/k_{B} T),$ where k(D) and k(D0) are the rates in the presence and absence of electrostatic interactions, respectively, U(el) is the average electrostatic interaction energy in a "transient-complex" ensemble, and k(B)T is the thermal energy. The transient-complex ensemble separates the bound state from the unbound state. Predictions of the transient-complex theory on four protein complexes were found to agree well with the experiment when the electrostatic interaction energy was calculated with the linearized Poisson-Boltzmann (PB) equation (Alsallaq and Zhou, Structure 2007;15:215-224). Here we show that the agreement is further improved when the nonlinear PB equation is used. These predictions are obtained with the dielectric boundary defined as the protein van der Waals surface. When the dielectric boundary is instead specified as the molecular surface, electrostatic interactions in the transient complex become repulsive and are thus predicted to retard association. Together these results demonstrate that the transient-complex theory is predictive of electrostatic rate enhancement and can help parameterize PB calculations.     

The amyloid precursor protein interacts with neutral lipids.

The amyloid protein precursor (APP) was incorporated into liposomes or phospholipid monolayers. APP insertion into liposomes required neutral lipids, such as L-alpha-phosphatidylcholine, in the target membrane. It was prevented in vesicles containing L-alpha-phosphatidylserine. The insertion was enhanced in acidic solutions, suggesting that it is modulated by specific charge/charge interactions. Surface-active properties and behaviour of APP were characterized during insertion of the protein in monomolecular films of L-alpha-phosphatidylcholine, L-alpha-phosphatidylethanolamine or L-alpha-phosphatidylserine. The presence of the lipid film enhanced the rate of adsorption of the protein at the interface, and the increase in surface pressure was consistent with APP penetrating the lipid film. The adsorption of APP on the lipid monolayers displayed a significant head group dependency, suggesting that the changes in surface pressure produced by the protein were probably affected by electrostatic interactions with the lipid layers. Our results indicate that the penetration of the protein into the lipid monolayer is also influenced by the hydrophobic interactions between APP and the lipid. CD spectra showed that a large proportion of the alpha-helical secondary structure of APP remained preserved over the pH or ionic strength ranges used. Our findings suggest that APP/membrane interactions are mediated by the lipid composition and depend on both electrostatic and hydrophobic effects, and that the variations observed are not due to major secondary structural changes in APP. These observations may be related to the partitioning of APP into membrane microdomains.     

Structure-based prediction of DNA-binding sites on proteins using the empirical preference of electrostatic potential and the shape of molecular surfaces

Protein-DNA interactions play an essential role in the genetic activities of life. Many structures of protein-DNA complexes are already known, but the common rules on how and where proteins bind to DNA have not emerged. Many attempts have been made to predict protein-DNA interactions using structural information, but the success rate is still about 80%. We analyzed 63 protein-DNA complexes by focusing our attention on the shape of the molecular surface of the protein and DNA, along with the electrostatic potential on the surface, and constructed a new statistical evaluation function to make predictions of DNA interaction sites on protein molecular surfaces. The shape of the molecular surface was described by a combination of local and global average curvature, which are intended to describe the small convex and concave and the large-scale concave curvatures of the protein surface preferentially appearing at DNA-binding sites. Using these structural features, along with the electrostatic potential obtained by solving the Poisson-Boltzmann equation numerically, we have developed prediction schemes with 86% and 96% accuracy for DNA-binding and non-DNA-binding proteins, respectively.     

Kinetic studies of protein-surface interactions: A two-stage model of surface-induced protein transitions in adsorbed biofilms

The irreversible adsorption of proteins on artificial surfaces plays an important role in a wide variety of practical problems. The simple analytical models based on definite concepts regarding the mechanisms of interfacial evolution can be used efficiently for characterization of protein-surface interactions by analyzing the intrinsic kinetics of the process. In this article, analytical expressions are derived for the adsorption kinetics that take into account the presence of more than one adsorbed state for proteins in biofilms. It is shown that the experimentally observed dependence of the adsorbed mass on the concentration of protein in solution can be reproduced with this model, and the approach provides a rapid method for obtaining quantitative parameters for the adsorption process. It is shown by analytical approximation of the kinetic curves for fibrinogen adsorption onto an unmodified gold surface studied by a surface plasmon resonance biosensor that this model is in good quantitative agreement with experiments. It is found that the rate of adsorption, controlled mainly by the mass flow from the solution, determines the contribution both to self-assembling and spreading, resulting in variations of adsorbed fibrinogen interfacial structures.     

The interaction of cytochrome c with monolayers of phosphatidylethanolamine

1. The interaction between [(14)C]carboxymethylated cytochrome c and monolayers of egg phosphatidylethanolamine at the air/water interface has been investigated by measurements of surface radioactivity, pressure and potential. 2. On adding (14)C-labelled cytochrome c to the subphase under monolayers with a surface pressure below 24dynes/cm. there was an initial surface pressure increment as the protein penetrated, followed by an adsorption that could be detected only by a continued increase in the surface radioactivity. 3. Above film pressures of 24dynes/cm. only adsorption was observed, i.e. an increment in surface radioactivity with none in surface pressure. 4. The changes in surface parameters with penetration of cytochrome c added to the subphase were indirectly proportional to the initial pressure of the monolayer. With hydrogenated phosphatidylethanolamine the constant of proportionality was increased but penetration again ceased at 24dynes/cm. 5. On compressing a phosphatidylethanolamine film containing penetrated cytochrome c to 40dynes/cm. only a proportion of the protein was ejected on a subphase of 10mm-sodium chloride, whereas on a subphase of m-sodium chloride nearly all the protein was lost. 6. With both penetration and adsorption only a small proportion of the added cytochrome c interacted with the phospholipid films, and initially the amount bound was proportional to the added protein concentration. There was no evidence of a stoicheiometric relationship between the protein and phospholipid or the build-up of multilayers. The bonded protein was not released by removing cytochrome c from the subphase. 7. The addition of m-sodium chloride to the subphase delays the rate of protein penetration into low-pressure films, but the final surface-pressure increment is not appreciably decreased. In contrast, m-sodium chloride almost completely stops adsorption on to films at all pressures. 8. When sodium chloride is added to the subphase below cytochrome c adsorbed to monolayers at high pressures, so that the final concentration is 1m, only a proportion of the protein is desorbed and this decreases as the time of the interaction increases. This indicates that adsorption is initially electrostatic, followed by the formation of non-ionic bonds. 9. Alteration of the subphase pH under a high-pressure film leads to a steady increase in adsorption from pH3 to 8.5 followed by a rapid fall to zero adsorption at pH11. 10. The penetration into phospholipid monolayers at 10dynes/cm. shows a rate that is consistent with the relative electrostatic status of the two components of the interaction as the subphase pH is varied between 3 and 10.5. The final equilibrium penetration shows a pronounced peak in the increments of surface pressure at pH9.0 although a similar peak is not observed in the surface radioactivity. This indicates that more residues of the protein are penetrating into the film at about this pH. 11. Determinations were made of the electrophoretic mobilities of phosphatidylethanolamine particles both alone and after interaction with cytochrome c. 12. The electrophoretic mobilities of cytochrome c adsorbed on lipid particles showed an isoelectric point below that of cytochrome c. This and the observations on the monolayers suggest that, with cytochrome c, protein-protein interactions are weak compared with other proteins.     

Adsorption of beta-galactosidase of Alicyclobacillus acidocaldarius on wild type and mutants spores of Bacillus subtilis

ABSTRACT: BACKGROUND: The Bacillus subtilis spore has long been used as a surface display system with potential applications in a variety of fields ranging from mucosal vaccine delivery, bioremediation and biocatalyst development. More recently, a non-recombinant approach of spore display has been proposed and heterologous proteins adsorbed on the spore surface. We used the well-characterized beta-galactosidase from the thermoacidophilic bacterium Alicyclobacillus acidocaldarius as a model to study enzyme adsorption, to analyze whether and how spore-adsorption affects the properties of the enzyme and to improve the efficiency of the process. RESULTS: We report that purified beta-galactosidase molecules were adsorbed to purified spores of a wild type strain of B. subtilis retaining ca. 50% of their enzymatic activity. Optimal pH and temperature of the enzyme were not altered by the presence of the spore, that protected the adsorbed beta-galactosidase from exposure to acidic pH conditions. A collection of mutant strains of B. subtilis lacking a single or several spore coat proteins was compared to the isogenic parental strain for the adsorption efficiency. Mutants with an altered outermost spore layer (crust) were able to adsorb 60-80% of the enzyme, while mutants with a severely altered or totally lacking outer coat adsorbed 100% of the beta-galactosidase molecules present in the adsorption reaction. CONCLUSION: Our results indicate that the spore surface structures, the crust and the outer coat layer, have an negative effect on the adhesion of the beta-galactosidase. Electrostatic forces, previously suggested as main determinants of spore adsorption, do not seem to play an essential role in the spore-beta-galactosidase interaction. The analysis of mutants with altered spore surface has shown that the process of spore adsorption can be improved and has suggested that such improvement has to be based on a better understanding of the spore surface structure. Although the molecular details of spore adsorption have not been fully elucidated, the efficiency of the process and the pH-stability of the adsorbed molecules, together with the well documented robustness and safety of spores of B. subtilis, propose the spore as a novel, non-recombinant system for enzyme display.     

An electrostatic basis for the stability of thermophilic proteins

Two factors provide key contributions to the stability of thermophilic proteins relative to their mesophilic homologues: electrostatic interactions of charged residues in the folded state and the dielectric response of the folded protein. The dielectric response for proteins in a "thermophilic series" globally modulates the thermal stability of its members, with the calculated dielectric constant for the protein increasing from mesophiles to hyperthermophiles. This variability results from differences in the distribution of charged residues on the surface of the protein, in agreement with structural and genetic observations. Furthermore, the contribution of electrostatic interactions to the stability of the folded state is more favorable for thermophilic proteins than for their mesophilic homologues. This leads to the conclusion that electrostatic interactions play an important role in determining the stability of proteins at high temperatures. The interplay between electrostatic interactions and dielectric response also provides further rationalization for the enhanced stability of thermophilic proteins with respect to cold-denaturation. Taken together, the distribution of charged residues and their fluctuations have been shown to be factors in modulating protein stability over the entire range of biologically relevant temperatures.     

Interaction of synapsin I with membranes

The synapsins (I, II, and III) comprise a family of peripheral membrane proteins that are involved in both regulation of neurotransmitter release and synaptogenesis. Synapsins are concentrated at presynaptic nerve terminals and are associated with the cytoplasmic surface of synaptic vesicles. Membrane-binding of synapsins involves interaction with both protein and lipid components of synaptic vesicles. Synapsin I binds rapidly and with high affinity to liposomes containing anionic lipids. The binding of bovine synapsin I to liposomes was studied using fluoresceinphosphatidyl-ethanolamine (FPE) to measure membrane electrostatic potential. Synapsin binding to liposomes caused a rapid increase in FPE fluorescence, indicating an increase in positive charge at the membrane surface. Synapsin I binding to monolayers resulted in a substantial increase in monolayer surface pressure. At higher initial surface pressures, the synapsin-induced increase in monolayer surface pressure is dependent on the presence of anionic lipids in the monolayer. Synapsin I also induced rapid aggregation of liposomes, but did not induce leakage of entrapped carboxyfluorescein, while other aggregation-inducing agents promoted extensive leakage. These results are in agreement with the presence of amphipathic stretches of amino acids in synapsin I that exhibit both electrostatic and hydrophobic interactions with membranes, and offer a molecular explanation for the high affinity binding of synapsin I to liposomes and for stabilization of membranes by synapsin I.