Preparation of single-stranded deoxyribonucleic acid probes using an immobilized template

A new method for the easy preparation of specific single-stranded DNA fragments is presented. Recombinant M13 DNA containing the strand complementary to the sequence of interest is made partially double-stranded by elongating a conventional M13 sequencing primer. Following linearization by enzymatic digestion downstream from the insert (relative to priming site), this DNA is coupled to diazotized paper through its single-stranded (vector) portion. Subsequent denaturation of the double-stranded region generates an immobilized template strand. Successive runs of primed syntheses of the (desired) complementary strand can be realized using the same template. The copies are easily isolated by release upon denaturation. DNA probes prepared by this method have proven to be valuable tools for gene analysis.     

Exoquence DNA sequencing.

We have developed a strategy for DNA sequencing based on exonuclease III digestion followed by double strand specific endonuclease digestion and direct dideoxynucleotide sequencing reaction. This strategy eliminates the need for subcloning, oligonucleotide primers, and prior knowledge of the DNA to be sequenced. All template and primer duplexes needed for sequencing a complete insert can be prepared in one day from uncharacterized starting DNA. Sequence information can be obtained from different regions of the DNA simultaneously. The method uses double-stranded DNA to generate single-stranded template and primer, and thus produces high quality sequence results. Commercially available dideoxy-sequencing kits are well suited for this method. The strategy should be applicable for both automatic and routine laboratory DNA sequencing.     

Specific-primer-directed DNA sequencing

A simple and rapid strategy for DNA sequence analysis based on the Sanger chain-termination method is described. This procedure utilizes full-sized inserts of 1 to 4 kb of DNA cloned into M13 bacteriophage vectors. After the sequence of the first 600-650 bp of the insert DNA has been determined with the commercially available universal vector primer, a specific oligonucleotide is synthesized utilizing the sequence data obtained from the 3' end of the sequence and used as a primer to extend the sequence analysis for another 600-650 nucleotides. Additional primers are synthesized in a similar manner until the nucleotide sequence of the entire insert DNA has been determined. General guidelines for the selection of oligonucleotide length and composition and the use of unpurified primers are discussed. The use of the specific-primer-directed approach to dideoxynucleotide sequence analysis, in association with highly purified single-stranded template DNA, reduces considerably the time required for the analysis of large segments of DNA.     

A directed nucleotide-sequencing approach for single-stranded vectors based on recloning intermediates of a progressive DNA synthesis reaction

A simple method for site-directed nucleotide sequencing is presented that uses a novel procedure for generating nested 'deletions' within inserts of single-stranded clones. In this method, single-stranded template, sequencing primer, and the Klenow fragment of Escherichia coli DNA polymerase I are used to initiate progressive DNA synthesis of the entire insert of the clone. By time-dependent sampling and pooling of intermediates from the synthesis reaction a series of nested double-stranded DNA subfragments of the insert can be created. Nested subclones are then produced by S1-endonuclease treatment and oriented subcloning methods. First, smaller quantities of template DNA can be used, equivalent to a fraction of a small DNA sequencing prep. Second, it works with single-stranded M13 phage DNA rather than requiring the preparation of double-stranded replicative form DNA as in ExoIII-based methods. Third, the 'deletions' it generates can span areas of simple nucleotide sequence or secondary structure that often halt digestion in the single-stranded exonuclease-based method. Last, the method is adaptable to a larger variety of insert cloning sites than the ExoIII-based method. The main disadvantage of the method is that, due to the lower efficiency of subcloning larger DNA fragments, subclone inserts larger than 3 kb are generated only infrequently.     

A fast and simple method for sequencing DNA cloned in the single-stranded bacteriophage M13.

The chain termination DNA sequencing procedure of Sanger et al. (1977) requires single-stranded DNA as template. M13 phage DNA exists as a single strand and therefore every DNA sequence cloned in M13 can be easily obtained in this form. Here we show that M13 single-stranded DNA pure enough to be used as a template for sequence determination can be prepared by simple centrifugation of the phage particle and extraction with phenol.     

Formation of Template-Switching Artifacts by Linear Amplification

Linear amplification is a method of synthesizing single-stranded DNA from either a single-stranded DNA or one strand of a double-stranded DNA. In this protocol, molecules of a single primer DNA are extended by multiple rounds of DNA synthesis at high temperature using thermostable DNA polymerases. Although linear amplification generates the intended full-length single-stranded product, it is more efficient over single-stranded templates than double-stranded templates. We analyzed linear amplification over single- or double-stranded mouse H-ras DNA (exon 1–2 region). The single-stranded H-ras template yielded only the intended product. However, when the double-stranded template was used, additional artifact products were observed. Increasing the concentration of the double-stranded template produced relatively higher amounts of these artifact products. One of the artifact DNA bands could be mapped and analyzed by sequencing. It contained three template-switching products. These DNAs were formed by incomplete DNA strand extension over the template strand, followed by switching to the complementary strand at a specific Ade nucleotide within a putative hairpin sequence, from which DNA synthesis continued over the complementary strand.     

Construction of an M13 histidine-transducing phage: a single-stranded cloning vehicle with one EcoRI site.

In order to create a ready source of single-stranded DNA for DNA sequence determination by the dideoxy chain-termination method, the promoter-proximal part of the histidine operon, the hisOGD region of Salmonella typhimurium, was cloned onto the single-stranded phage M13. Both orientations of the his DNA were cloned to supply DNA template for sequencing of each strand. Insertion was achieved at an HaeIII site in the intergenic region (IR) of M13, and a single EcoRI site was purposely regenerated at one boundary of the his DNA insert. Infected colonies, not plaques, were selected using the hisD gene as a selective marker. The single RI site and the hisD marker for auxotrophic selection represent improvements on the wild type M13 as a single-stranded vector for cloning other DNA.     

Optimization of asymmetric polymerase chain reaction for rapid fluorescent DNA sequencing

A high-throughput method for the preparation of single-stranded template DNA, which is suitable for sequence analysis using fluorescent labeling chemistry, is described here. In this procedure, the asymmetric polymerase chain reaction is employed to amplify recombinant plasmid or bacteriophage DNA directly from colonies or plaques. The use of amplification primers located at least 200 base pairs 5' to the site of sequencing primer annealing removes the need for extensive purification of the asymmetric polymerase chain reaction product. Instead, the single-stranded product DNA is purified by a simple isopropanol precipitation step and then directly sequenced using fluorescent dye-labeled oligonucleotides. This method significantly reduces the time and labor required for template preparation and improves fluorescent DNA sequencing strategies by providing a much more uniform yield of single-stranded DNA.     

A flexible and efficient template format for circular consensus sequencing and SNP detection

A novel template design for single-molecule sequencing is introduced, a structure we refer to as a SMRTbell™ template. This structure consists of a double-stranded portion, containing the insert of interest, and a single-stranded hairpin loop on either end, which provides a site for primer binding. Structurally, this format resembles a linear double-stranded molecule, and yet it is topologically circular. When placed into a single-molecule sequencing reaction, the SMRTbell template format enables a consensus sequence to be obtained from multiple passes on a single molecule. Furthermore, this consensus sequence is obtained from both the sense and antisense strands of the insert region. In this article, we present a universal method for constructing these templates, as well as an application of their use. We demonstrate the generation of high-quality consensus accuracy from single molecules, as well as the use of SMRTbell templates in the identification of rare sequence variants.     

Primer-independent RNA sequencing with bacteriophage phi6 RNA polymerase and chain terminators

Here we propose a new general method for directly determining RNA sequence based on the use of the RNA-dependent RNA polymerase from bacteriophage phi6 and the chain terminators (RdRP sequencing). The following properties of the polymerase render it appropriate for this application: (1) the phi6 polymerase can replicate a number of single-stranded RNA templates in vitro. (2) In contrast to the primer-dependent DNA polymerases utilized in the sequencing procedure by Sanger et al. (Proc Natl Acad Sci USA, 1977, 74:5463-5467), it initiates nascent strand synthesis without a primer, starting the polymerization on the very 3'-terminus of the template. (3) The polymerase can incorporate chain-terminating nucleotide analogs into the nascent RNA chain to produce a set of base-specific termination products. Consequently, 3' proximal or even complete sequence of many target RNA molecules can be rapidly deduced without prior sequence information. The new technique proved useful for sequencing several synthetic ssRNA templates. Furthermore, using genomic segments of the bluetongue virus we show that RdRP sequencing can also be applied to naturally occurring dsRNA templates. This suggests possible uses of the method in the RNA virus research and diagnostics.     

A short primer for sequencing DNA cloned in the single-stranded phage vector M13mp2.

In this paper we describe the synthesis and cloning of a short segment of DNA complementary to the region immediately adjacent to the EcoRI insertion site in the single-stranded bacteriophage vector M13mp2. This segment is useful as a "universal" primer for DNA sequencing by the dideoxynucleotide chain termination method; the template can be any DNA species cloned in M13mp2 or its derivatives. The primer has been cloned into the tetracycline resistance gene of plasmid pBR322 as one strand of a 26 bp EcoRI/BamHI fragment. This fragment may be readily prepared from an EcoRI + BamHI restriction digest of the parent plasmid (designated pSP14) by a simple size fractionation.     

Cloning and direct sequencing of plant promoters using primer-adapter mediated PCR on DNA coupled to a magnetic solid phase.

A method that allows amplification and direct sequencing or cloning of an unknown DNA segment flanked by a known sequence is described using barley genomic DNA. The method avoids the step of circularization necessary for inverse PCR by ligation of primer-adapters to restricted genomic DNA. Specificity is achieved in the first amplification step; linear PCR with a biotinylated primer complementary to the known flanking sequence (primer 1-B) produces a single-stranded product that is purified employing streptavidin-coated magnetic beads. After this step, which removes genomic DNA, two rounds of exponential PCR are performed, first with the adapter-primer and primer 1 and second with primer 1 substituted by a nested primer 2. If the second primer is biotinylated, the product can be sequenced directly using solid-phase sequencing. We have employed this method to sequence directly and to clone the promoters of two late embryogenesis-abundant (Lea) genes (B19.4 and B19.3) from barley. Lea B19.4 and B19.3 encode putative desiccation-protective proteins that act in the final stages of embryogenesis and have previously been cloned as cDNAs. We demonstrate here that their proximal promoter regions are very similar (80% identity) and that both contain putative abscisic acid-responsive elements.     

Signal sequence of alkaline phosphatase of Escherichia coli.

The amino acid sequence of the signal sequence of phoA was determined by DNA sequencing by using the dideoxy chain termination technique (Sanger et al., Proc. Natl. Acad. Sci. U.S.A. 74:5463-5467, 1977). The template used was single-stranded DNA obtained from M13 on f1 phage derivatives carrying phoA, constructed by in vitro recombination. The results confirm the sequence of the first five amino acids determined by Sarthy et al. (J. Bacteriol. 139:932-939, 1979) and extend the sequence in the same reading frame into the amino terminal region of the mature alkaline phosphatase (Bradshaw et al., Proc. Natl. Acad. Sci. U.S.A., 78:3473-3477, 1981). As was predicted (Inouye and Beckwith, Proc. Natl. Acad. Sci. U.S.A. 74:1440-1444, 1977), the signal sequence was highly hydrophobic. The alteration of DNA sequence was identified for a promoter mutation that results in the expression of phoA independent of the positive control gene phoB and in insensitivity to high phosphate.     

菌落PCR在大规模基因组测序中的应用

一种利用菌落直接PCR扩增DNA并用于测序的实验方法.通过对引物的设计和菌液浓度控制,使PCR反应后的内容物对测序干扰减到最小.与传统的测序过程比较,它省去了抽提模板DNA一步,节省了大量时间和实验成本.另外此方法可对BAC亚克隆库构建时由连接转化过程中导致的假阳性起筛选和鉴定作用.采用该法成功测定了籼稻（Oryza sativa indica）广陆矮4号的L3173号BAC DNA全长序列（约100 kb）,GenBank登录号：AL512542.     

An efficient and site-specific gene trimming method

Trimming a DNA strand into a precisely determined fragment can be carried out efficiently by an improved method involving a site-specific trim-primer and a single-stranded DNA template which is generated from a multifunctional vector, pTZ18R, and linearized by using an Eco RI-pTZ18R splinter. A complementary DNA strand is synthesized by DNA polymerase I (Klenow), and the 3'-end of the template upstream from the annealed primer is trimmed by subsequent T4 DNA polymerase reaction. An ATG translation initiator codon or a termination codon can be incorporated into the trim-primer, providing versatility to this single-stranded DNA-initiated gene trimming method that can be applied to subcloning and expression of any DNA fragment with known terminal sequences.