Glutamate 85 and glutamate 228 contribute to the pH-response of the soluble form of chloride intracellular channel 1

The chloride intracellular channel protein, CLIC1, is synthesised as a soluble monomer that can reversibly bind membranes. Soluble CLIC1 is proposed to respond to the low pH found at a membrane surface by partially unfolding and restructuring into a membrane-competent conformation. This transition is proposed to be controlled by strategically located “pH-sensor” residues that become protonated at acidic pH. In this study, we investigate the role of two conserved glutamate residues, Glu85 in the N-domain and Glu228 in the C-domain, as pH-sensors. E85L and E228L CLIC1 variants were created to reduce pH sensitivity by permanently breaking the bonds these residues form. The structure and stability of each variant was compared to the wild type at both pH 7.0 and pH 5.5. Neither substitution significantly altered the structure but both decreased the conformational stability. Furthermore, E85L CLIC1 formed a urea-induced unfolding intermediate state at both pH 7 and pH 5.5 compared to wild-type and E228L CLIC1 which only formed the intermediate at pH 5.5. We conclude that Glu85 and Glu228 are two of the five pH-sensor residues of CLIC1 and contribute to the pH-response in different ways. Glu228 lowers the stability of the native state at pH 5.5, while Glu85 contributes both to the stability of the native state and to the formation of the intermediate state. By putting these interactions into the context of the three previously described CLIC1 pH-sensor residues, we propose a mechanism for the conversion of CLIC1 from the soluble state to the pre-membrane form.     

Refined solution structure and backbone dynamics of the archaeal MC1 protein

The 3D structure of methanogen chromosomal protein 1 (MC1), determined with heteronuclear NMR methods, agrees with its function in terms of the shape and nature of the binding surface, whereas the 3D structure determined with homonuclear NMR does not. The structure features five loops, which show a large distribution in the ensemble of 3D structures. Evidence for the fact that this distribution signifies internal mobility on the nanosecond time scale was provided by using (15)N-relaxation and molecular dynamics simulations. Structural variations of the arm (11 residues) induced large shape anisotropy variations on the nanosecond time scale that ruled out the use of the model-free formalism to analyze the relaxation data. The backbone dynamics analysis of MC1 was achieved by comparison with 20 ns molecular dynamics trajectories. Two β-bulges showed that hydrogen bond formation correlated with ? and ψ dihedral angle transitions. These jumps were observed on the nanosecond time scale, in agreement with a large decrease in (15)N-NOE for Gly17 and Ile89. One water molecule bridging NH(Glu87) and CO(Val57) through hydrogen bonding contributed to these dynamics. Nanosecond slow motions observed in loops LP3 (35-42) and LP5 (67-77) reflected the lack of stable hydrogen bonds, whereas the other loops, LP1 (10-14), LP2 (22-24), and LP4 (50-53), were stabilized by several hydrogen bonds. Dynamics are often directly related to function. Our data strongly suggest that residues belonging to the flexible regions of MC1 could be involved in the interaction with DNA.     

Isolation and Characterization of Glutamyl Endopeptidase 2 from Bacillus intermedius 3-19

The culture filtrate of Bacillus intermedius 3-19 was used for isolation by chromatography on CM-cellulose and Mono S columns of a proteinase that is secreted during the late stages of growth. The enzyme is irreversibly inhibited by the inhibitor of serine proteinases diisopropyl fluorophosphate, has two pH optima (7.2 and 9.5) for casein hydrolysis and one at pH 8.5 for Z-Glu-pNA hydrolysis. The molecular weight of the enzyme is 26.5 kD. The K(m) for Z-Glu-pNA hydrolysis is 0.5 mM. The temperature and pH dependences of the stability of the proteinase were studied. The enzyme was identified as glutamyl endopeptidase 2. The N-terminal sequence (10 residues) and amino acid composition of the enzyme were determined. The enzyme hydrolyzes Glu4-Gln5, Glu17-Asp18, and Cys11-Ser12 bonds in the oxidized A-chain of insulin and Glu13-Ala14, Glu21-Arg22, Cys7-Gly8, and Cys19-Gly20 bonds in the oxidized B-chain of insulin.     

Crystal structure of Escherichia coli SufC, an ABC-type ATPase component of the SUF iron-sulfur cluster assembly machinery

SufC is an ATPase component of the SUF machinery, which is involved in the biosynthesis of Fe-S clusters. To gain insight into the function of this protein, we have determined the crystal structure of Escherichia coli SufC at 2.5A resolution. Despite the similarity of the overall structure with ABC-ATPases (nucleotide-binding domains of ABC transporters), some key differences were observed. Glu171, an invariant residue involved in ATP hydrolysis, is rotated away from the nucleotide-binding pocket to form a SufC-specific salt bridge with Lys152. Due to this salt bridge, D-loop that follows Glu171 is flipped out to the molecular surface, which may sterically inhibit the formation of an active dimer. Thus, the salt bridge may play a critical role in regulating ATPase activity and preventing wasteful ATP hydrolysis. Furthermore, SufC has a unique Q-loop structure on its surface, which may form a binding site for its partner proteins, SufB and/or SufD.     

The crystal structure of spermidine/spermine N1-acetyltransferase in complex with spermine provides insights into substrate binding and catalysis

The enzyme spermidine/spermine N (1)-acetyltransferase (SSAT) catalyzes the transfer of acetyl groups from acetylcoenzyme A to spermidine and spermine, as part of a polyamine degradation pathway. This work describes the crystal structure of SSAT in complex with coenzyme A, with and without bound spermine. The complex with spermine provides a direct view of substrate binding by an SSAT and demonstrates structural plasticity near the active site of the enzyme. Associated water molecules bridge several of the intermolecular contacts between spermine and the enzyme and form a "proton wire" between the side chain of Glu92 and the N1 amine of spermine. A single water molecule can also be seen forming hydrogen bonds with the side chains of Glu92, Asp93, and the N4 amine of spermine. Site-directed mutation of Glu92 to glutamine had a detrimental effect on both substrate binding and catalysis and shifted the optimal pH for enzyme activity further into alkaline solution conditions, while mutation of Asp93 to asparagine affected both substrate binding and catalysis without changing the pH dependence of the enzyme. Considered together, the structural and kinetic data suggest that Glu92 functions as a catalytic base to drive an otherwise unfavorable deprotonation step at physiological pH.     

Exploring the early stages of the pH‐induced conformational change of influenza hemagglutinin

Hemagglutinin (HA) mediates the membrane fusion process of influenza virus through its pH‐induced conformational change. However, it remains challenging to study its structure reorganization pathways in atomic details. Here, we first applied continuous constant pH molecular dynamics approach to predict the pK_a values of titratable residues in H2 subtype HA. The calculated net‐charges in HA1 globular heads increase from 0e (pH 7.5) to +14e (pH 4.5), indicating that the charge repulsion drives the detrimerization of HA globular domains. In HA2 stem regions, critical pH sensors, such as Glu103₂, His18₁, and Glu89₁, are identified to facilitate the essential structural reorganizations in the fusing pathways, including fusion peptide release and interhelical loop transition. To probe the contribution of identified pH sensors and unveil the early steps of pH‐induced conformational change, we carried out conventional molecular dynamics simulations in explicit water with determined protonation state for each titratable residue in different environmental pH conditions. Particularly, energy barriers involving previously uncharacterized hydrogen bonds and hydrophobic interactions are identified in the fusion peptide release pathway. Nevertheless, comprehensive comparisons across HA family members indicate that different HA subtypes might employ diverse pH sensor groups along with different fusion pathways. Finally, we explored the fusion inhibition mechanism of antibody CR6261 and small molecular inhibitor TBHQ, and discovered a novel druggable pocket in H2 and H5 subtypes. Our results provide the underlying mechanism for the pH‐driven conformational changes and also novel insight for anti‐flu drug development. Proteins 2014; 82:2412–2428. © 2014 Wiley Periodicals, Inc.     

Substrate recognition mechanism of alpha-1,6-glucosidic linkage hydrolyzing enzyme, dextran glucosidase from Streptococcus mutans

We have determined the crystal structure of Streptococcus mutans dextran glucosidase, which hydrolyzes the α-1,6-glucosidic linkage of isomaltooligosaccharides from their non-reducing ends to produce α-glucose. By using the mutant of catalytic acid Glu236→Gln, its complex structure with the isomaltotriose, a natural substrate of this enzyme, has been determined. The enzyme has 536 amino acid residues and a molecular mass of 62,001 Da. The native and the complex structures were determined by the molecular replacement method and refined to 2.2 Å resolution, resulting in a final R-factor of 18.3% for significant reflections in the native structure and 18.4% in the complex structure. The enzyme is composed of three domains, A, B and C, and has a (β/α)₈-barrel in domain A, which is common to the α-amylase family enzymes. Three catalytic residues are located at the bottom of the active site pocket and the bound isomaltotriose occupies subsites −1 to +2. The environment of the glucose residue at subsite −1 is similar to the environment of this residue in the α-amylase family. Hydrogen bonds between Asp60 and Arg398 and O4 atom of the glucose unit at subsite −1 accomplish recognition of the non-reducing end of the bound substrate. The side-chain atoms of Glu371 and Lys275 form hydrogen bonds with the O2 and O3 atoms of the glucose residue at subsite +1. The positions of atoms that compose the scissile α-1,6-glucosidic linkage (C1, O6 and C6 atoms) are identical with the positions of the atoms in the scissile α-1,4 linkage (C1, O4 and C4 atoms) of maltopentaose in the α-amylase structure from Bacillus subtilis. The comparison with the α-amylase suggests that Val195 of the dextran glucosidase and the corresponding residues of α-1,6-hydrolyzing enzymes participate in the determination of the substrate specificity of these enzymes.     

Plant cyclotides: A unique family of cyclic and knotted proteins that defines the cyclic cystine knot structural motif

Several macrocyclic peptides ( approximately 30 amino acids), with diverse biological activities, have been isolated from the Rubiaceae and Violaceae plant families over recent years. We have significantly expanded the range of known macrocyclic peptides with the discovery of 16 novel peptides from extracts of Viola hederaceae, Viola odorata and Oldenlandia affinis. The Viola plants had not previously been examined for these peptides and thus represent novel species in which these unusual macrocyclic peptides are produced. Further, we have determined the three-dimensional structure of one of these novel peptides, cycloviolacin O1, using (1)H NMR spectroscopy. The structure consists of a distorted triple-stranded beta-sheet and a cystine-knot arrangement of the disulfide bonds. This structure is similar to kalata B1 and circulin A, the only two macrocyclic peptides for which a structure was available, suggesting that despite the sequence variation throughout the peptides they form a family in which the overall fold is conserved. We refer to these peptides as the cyclotide family and their embedded topology as the cyclic cystine knot (CCK) motif. The unique cyclic and knotted nature of these molecules makes them a fascinating example of topologically complex proteins. Examination of the sequences reveals they can be separated into two subfamilies, one of which tends to contain a larger number of positively charged residues and has a bracelet-like circularization of the backbone. The second subfamily contains a backbone twist due to a cis-Pro peptide bond and may conceptually be regarded as a molecular Moebius strip. Here we define the structural features of the two apparent subfamilies of the CCK peptides which may be significant for the likely defense related role of these peptides within plants.     

Crystal structure of spinach plastocyanin at 1.7 A resolution.

The crystal structure of plastocyanin from spinach has been determined using molecular replacement, with the structure of plastocyanin from poplar as a search model. Successful crystallization was facilitated by site-directed mutagenesis in which residue Gly8 was substituted with Asp. The region around residue 8 was believed to be too mobile for the wild-type protein to form crystals despite extensive screening. The current structure represents the oxidized plastocyanin, copper (II), at low pH (approximately 4.4). In contrast to the similarity in the core region as compared to its poplar counterpart, the structure shows some significant differences in loop regions. The most notable is the large shift of the 59-61 loop where the largest shift is 3.0 A for the C(alpha) atom of Glu59. This results in different patterns of electrostatic potential around the acidic patches for the two proteins.     

Dissecting the electrostatic interactions and pH-dependent activity of a family 11 glycosidase

Previous studies of the low molecular mass family 11 xylanase from Bacillus circulans show that the ionization state of the nucleophile (Glu78, pK(a) 4.6) and the acid/base catalyst (Glu172, pK(a) 6.7) gives rise to its pH-dependent activity profile. Inspection of the crystal structure of BCX reveals that Glu78 and Glu172 are in very similar environments and are surrounded by several chemically equivalent and highly conserved active site residues. Hence, there are no obvious reasons why their apparent pK(a) values are different. To address this question, a mutagenic approach was implemented to determine what features establish the pK(a) values (measured directly by (13)C NMR and indirectly by pH-dependent activity profiles) of these two catalytic carboxylic acids. Analysis of several BCX variants indicates that the ionized form of Glu78 is preferentially stabilized over that of Glu172 in part by stronger hydrogen bonds contributed by two well-ordered residues, namely, Tyr69 and Gln127. In addition, theoretical pK(a) calculations show that Glu78 has a lower pK(a) value than Glu172 due to a smaller desolvation energy and more favorable background interactions with permanent partial charges and ionizable groups within the protein. The pK(a) value of Glu172 is in turn elevated due to electrostatic repulsion from the negatively charged glutamate at position 78. The results also indicate that all of the conserved active site residues act concertedly in establishing the pK(a) values of Glu78 and Glu172, with no particular residue being singly more important than any of the others. In general, residues that contribute positive charges and hydrogen bonds serve to lower the pK(a) values of Glu78 and Glu172. The degree to which a hydrogen bond lowers a pK(a) value is largely dependent on the length of the hydrogen bond (shorter bonds lower pK(a) values more) and the chemical nature of the donor (COOH > OH > CONH(2)). In contrast, neighboring carboxyl groups can either lower or raise the pK(a) values of the catalytic glutamic acids depending upon the electrostatic linkage of the ionization constants of the residues involved in the interaction. While the pH optimum of BCX can be shifted from -1.1 to +0.6 pH units by mutating neighboring residues within the active site, activity is usually compromised due to the loss of important ground and/or transition state interactions. These results suggest that the pH optima of an enzyme might be best engineered by making strategic amino acid substitutions, at positions outside of the "core" active site, that electrostatically influence catalytic residues without perturbing their immediate structural environment.     

Conformational analysis of an acyclic tetrapeptide: ab‐initio structure determination from X‐ray powder diffraction,Hirshfeld surface analysis and electronic structure

A terminally protected acyclic tetrapeptide has been synthesized, and the crystal structure of its hydrated form, Boc‐Tyr‐Aib‐Tyr‐Ile‐OMe·2H₂O ( 1 ), has been determined directly from powder X‐ray diffraction data. The backbone conformation of tetrapeptide ( 1 ) exhibiting two consecutive β‐turns is stabilized by two 4 → 1 intramolecular N―H · · · O hydrogen bonds. In the crystalline state, the tetrapeptide molecules are assembled through water‐mediated O―H · · · O hydrogen bonds to form two‐dimensional molecular sheets, which are further linked by intermolecular C―H · · · O hydrogen bonds into a three‐dimensional supramolecular framework. The molecular electrostatic potential (MEP) surface of ( 1 ) has been used to supplement the crystallographic observations. The nature of intermolecular interactions in ( 1 ) has been analyzed quantitatively through the Hirshfeld surface and two‐dimensional fingerprint plot. The DFT optimized molecular geometry of ( 1 ) agrees closely with that obtained from the X‐ray structure analysis. The present structure analysis of Boc‐Tyr‐Aib‐Tyr‐Ile‐OMe·2H₂O ( 1 ) represents a case where ab‐initio crystal structure of an acyclic tetrapeptide with considerable molecular flexibility has been accomplished from laboratory X‐ray powder diffraction data. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Homology modeling of a heme protein, lignin peroxidase, from the crystal structure of cytochrome c peroxidase.

A 3-dimensional model of lignin peroxidase (LiP) was constructed based on its sequence homology with other peroxidases, particularly cytochrome c peroxidase, the only protein with a known crystal structure in the peroxidase family. The construction of initial conformations of insertions and deletions was assisted by secondary structure predictions, amphipathic helix predictions, and consideration of the specific protein environment. A succession of molecular dynamics simulations of these regions with surrounding residues as constraints were carried out to relax the bond lengths and angles. Full protein molecular dynamics simulations with explicit consideration of bound waters were performed to relax the geometry and to identify dynamically flexible regions of the successive models for further refinement. Among the important functionally relevant structural features predicted are: (i) four disulfide bonds are predicted to be formed between Cys3 and Cys15, Cys14 and Cys285, Cys34 and Cys120 and Cys249 and Cys317; (ii) a glycosylation site, Asn257, was located on the surface; (iii) Glu40 was predicted to form a salt bridge with Arg43 on the distal side of the heme and was considered as a possible origin for the pH dependence of compound I formation; and (iv) two candidate substrate binding sites with a cluster of surface aromatic residues and flexible backbones were found in the refined model, consistent with the nature of known substrates of LiP. Based on these predicted structural features of the model, further theoretical and experimental studies are proposed to continue to elucidate the structure and function of LiP.     

Role of Asn(2) and Glu(7) residues in the oxidative folding and on the conformation of the N-terminal loop of apamin

The X-ray structure of [N-acetyl]-apamin has been solved at 0.95 A resolution. It consists of an 1-7 N-terminal loop stabilized by an Asn-beta-turn motif (2-5 residues) and a helical structure spanning the 9-18 residues tightly linked together by two disulfide bonds. However, neither this accurate X-ray nor the available solution structures allowed us to rationally explain the unusual downfield shifts observed for the Asn(2) and Glu(7) amide signals upon Glu(7) carboxylic group ionization. Thus, apamin and its [N-acetyl], [Glu(7)Gln], [Glu(7)Asp], and [Asn(2)Abu] analogues and submitted to NMR structural studies as a function of pH. We first demonstrated that the Glu(7) carboxylate group is responsible for the large downfield shifts of the Asn(2) and Glu(7) amide signals. Then, molecular dynamics (MD) simulations suggested unexpected interactions between the carboxylate group and the Asn(2) and Glu(7) amide protons as well as the N-terminal alpha-amino group, through subtle conformational changes that do not alter the global fold of apamin. In addition, a structural study of the [Asn(2)Abu] analogue, revealed an essential role of Asn(2) in the beta-turn stability and the cis/trans isomerization of the Ala(5)-Pro(6) amide bond. Interestingly, this proline isomerization was shown to also depend on the ionization state of the Glu(7) carboxyl group. However, neither destabilization of the beta-turn nor proline isomerization drastically altered the helical structure that contains the residues essential for binding. Altogether, the Asn(2) and Glu(7) residues appeared essential for the N-terminal loop conformation and thus for the selective formation of the native disulfide bonds but not for the activity.     

Unusually stable β-sheet formation in an ionic self-complementary oligopeptide

A 16-residue amphiphilic oligopeptide (EAK16) with every other residue alanine and also containing glutamic acid and lysine (Ac-NH-AEAEAKAKAEAEAKAK-CONH₂) is able to form an unusually stable β-sheet structure. The β-sheet structure is stable at very low concentrations in water and at high temperatures. Various pH changes at 1.5, 3, 7, and 11 had little effect on the stability of the β-sheet structure. The β-sheet structure was not altered significantly even in the presence of 0.1% SDS, 7 molar guanidine hydrochloride, or 8 molar urea. One of the structural characteristics of the EAK16 is its ionic self-complementarity in that ionic bonds and hydrogen bonds between Glu and Lys can form readily between two oligopeptide β-sheet structures. This structural feature is probably one of the factors that promotes its extreme stability. This is the first example of such an extended ionic self-complementarity in a protein structure. EAK16 and its related peptides may have applications as useful biomaterials. It also offers a good model for studying the mechanism of β-sheet formation. Because the oligopeptide can self-assemble to form a membranous structure, it may have relevance to origin of life research. © 1994 John Wiley & Sons, Inc.     

NMR study of cyclic peptides with renin inhibitor activity

Several cyclic analogues of renin inhibitors, based on Glu-D-Phe-Lys motif have been investigated by NMR spectroscopy and molecular dynamics calculations (MD). The 15 membered macrocycle, resulting from Glu and Lys side-chain cyclization, exhibits conformational preference. The structural evidence from NMR shows the presence of hydrogen bond between Lys NH and Glu side-chain carbonyl, resulting in a 10 membered pseudo beta-turn-like structure. The structure of the cyclic moiety is similar in all the peptides, which takes at least two conformations around Calpha-Cbeta in Glu side chain. The restrained MD calculations further support such observations and show that the macrocycle is fairly rigid, with two conformations about the Glu Calpha-Cbeta bond. The linear peptide appendages, which are essential for activity in cyclic peptides, show an extended structure in the beta-region of Ramchandran plot. These calculations also demonstrate that for the most active peptide, two major conformers each exist about the Calpha-CO bond of the Lys, D-Trp and Leu residues. In this peptide, the cyclic moiety presents a negatively charged surface formed due to the carbonyl oxygens, which are thus available to form hydrogen bonds with the receptor. The linear fragment presents further binding sites with a surface which has the hydrophobic side chains of D-Trp, Leu and D-Met on one side and carbonyls on the other side.     

Characterization of the Glu and Asp residues in the active site of human beta-hexosaminidase B

Human beta-hexosaminidase A (alpha beta) and B (beta beta) are composed of subunits (alpha and beta) that are 60% identical and have been grouped with other evolutionarily related glycosidases into "Family 20". The three-dimensional structure of only one Family 20 member has been elucidated, a bacterial chitobiase. This enzyme shares primary structure homology with both the human subunits only in its active-site region, and even in this restricted area, the level of identity is only 26%. Thus, the validity of the molecular model for the active site of the human enzyme based on chitobiase must be determined experimentally. In this report, we analyze highly purified mutant forms of human hexosaminidase B that have had conservative substitutions made at Glu and Asp residues predicted by the chitobiase model to be part of its active site. Mutation of beta Glu(355) to Gln reduces k(cat) 5000-fold with only a small effect on K(m), while also shifting the pH optimum. These effects are consistent with assignment of this residue as the acid/base catalytic residue. Similarly, mutation of beta Asp(354) to Asn reduced k(cat) 2000-fold while leaving K(m) essentially unaltered, consistent with assignment of this residue as the residue that interacts with the substrate acetamide group to promote its attack on the anomeric center. These data in conjunction with the mutagenesis studies of Asp(241) and Glu(491) indicate that the molecular model is substantially accurate in its identification of catalytically important residues.     

Stability and structure-forming properties of the two disulfide bonds of alpha-conotoxin GI

alpha-Conotoxin GI is a 13 residue snail toxin peptide cross-linked by Cys2-Cys7 and Cys3-Cys13 disulfide bridges. The formation of the two disulfide bonds by thiol/disulfide exchange with oxidized glutathione (GSSG) has been characterized. To characterize formation of the first disulfide bond in each of the two pathways by which the two disulfide bonds can form, two model peptides were synthesized in which Cys3 and Cys13 (Cono-1) or Cys2 and Cys7 (Cono-2) were replaced by alanines. Equilibrium constants were determined for formation of the single disulfide bonds of Cono-1 and Cono-2, and an overall equilibrium constant was measured for formation of the two disulfide bonds of alpha-conotoxin GI in pH 7.00 buffer and in pH 7. 00 buffer plus 8 M urea using concentrations obtained by HPLC analysis of equilibrium thiol/disulfide exchange reaction mixtures. The results indicate a modest amount of cooperativity in the formation of the second disulfide bond in both of the two-step pathways by which alpha-conotoxin GI folds into its native structure at pH 7.00. However, when considered in terms of the reactive thiolate species, the results indicate substantial cooperativity in formation of the second disulfide bond. The solution conformational and structural properties of Cono-1, Cono-2, and alpha-conotoxin GI were studied by 1H NMR to identify structural features which might facilitate formation of the disulfide bonds or are induced by formation of the disulfide bonds. The NMR data indicate that both Cono-1 and Cono-2 have some secondary structure in solution, including some of the same secondary structure as alpha-conotoxin GI, which facilitates formation of the second disulfide bond by thiol/disulfide exchange. However, both Cono-1 and Cono-2 are considerably less structured than alpha-conotoxin GI, which indicates that formation of the second disulfide bond to give the Cys2-Cys7, Cys3-Cys13 pairing induces considerable structure into the backbone of the peptide.     

Crystal structure of the ternary complex of the catalytic domain of human phenylalanine hydroxylase with tetrahydrobiopterin and 3-(2-thienyl)-L-alanine,and its implications for the mechanism of catalysis and substrate activation

Phenylalanine hydroxylase catalyzes the stereospecific hydroxylation of L-phenylalanine, the committed step in the degradation of this amino acid. We have solved the crystal structure of the ternary complex (hPheOH-Fe(II).BH(4).THA) of the catalytically active Fe(II) form of a truncated form (DeltaN1-102/DeltaC428-452) of human phenylalanine hydroxylase (hPheOH), using the catalytically active reduced cofactor 6(R)-L-erythro-5,6,7,8-tetrahydrobiopterin (BH(4)) and 3-(2-thienyl)-L-alanine (THA) as a substrate analogue. The analogue is bound in the second coordination sphere of the catalytic iron atom with the thiophene ring stacking against the imidazole group of His285 (average interplanar distance 3.8A) and with a network of hydrogen bonds and hydrophobic contacts. Binding of the analogue to the binary complex hPheOH-Fe(II).BH(4) triggers structural changes throughout the entire molecule, which adopts a slightly more compact structure. The largest change occurs in the loop region comprising residues 131-155, where the maximum r.m.s. displacement (9.6A) is at Tyr138. This loop is refolded, bringing the hydroxyl oxygen atom of Tyr138 18.5A closer to the iron atom and into the active site. The iron geometry is highly distorted square pyramidal, and Glu330 adopts a conformation different from that observed in the hPheOH-Fe(II).BH(4) structure, with bidentate iron coordination. BH(4) binds in the second coordination sphere of the catalytic iron atom, and is displaced 2.6A in the direction of Glu286 and the iron atom, relative to the hPheOH-Fe(II).BH(4) structure, thus changing its hydrogen bonding network. The active-site structure of the ternary complex gives new insight into the substrate specificity of the enzyme, notably the low affinity for L-tyrosine. Furthermore, the structure has implications both for the catalytic mechanism and the molecular basis for the activation of the full-length tetrameric enzyme by its substrate. The large conformational change, moving Tyr138 from a surface position into the active site, may reflect a possible functional role for this residue.     

Effect of temperature and pH on the secondary structure and processes of oligomerization of 19 kDa alpha-zein

Highly hydrophobic protein Z19 zein shows a tendency towards oligomerization. The role of temperature and pH on the oligomerization process was studied monitoring the secondary structure content and the appearance of aggregates by Circular Dichroism Spectroscopy (CD) and Dinamic Light Scattering (DLS). Z19 zein suffers irreversible thermal denaturalization, as demonstrated by far-UV CD measurements. DLS data indicate that this denaturalization is accompanied by oligomerization processes which are strongly dependent on temperature. The aggregates that appear when the sample is heated maintain a certain amount of their native structure. Oligomers, showing high stability to temperature changes and other denaturing conditions with molecular weights of 45, 66 kDa and higher, were detected by SDS-PAGE. The secondary structure strongly depends on pH. Thus, at pH above pI (6.8), all the protein structure is in alpha helix. The formation of disulfide bonds plays an important role in the aggregation process, since most of the sulfhydryls in the protein (97.52%) form disulfide bonds and only 2.47% of them are free and superficially exposed. The sensitivity towards thermal denaturalization is also affected by pH rises.     

Production and crystallization of processing α-glucosidase I: Pichia pastoris expression and a two-step purification toward structural determination

Eukaryotic N-glycoprotein processing in the endoplasmic reticulum begins with the catalytic action of processing α-glucosidase I (αGlu). αGlu trims the terminal glucose from nascent glycoproteins in an inverting-mechanism glycoside hydrolysis reaction. αGlu has been studied in terms of kinetic parameters and potential key residues; however, the active site is unknown. A structural model would yield important insights into the reaction mechanism. A model would also be useful in developing specific therapeutics, as αGlu is a viable drug target against viruses with glycosylated envelope proteins. However, due to lack of a high-yielding overexpression and purification scheme, no eukaryotic structural model of αGlu has been determined. To address this issue, we overexpressed the Saccharomyces cerevisiae soluble αGlu, Cwht1p, in the host Pichia pastoris. It was purified in a simple two-step protocol, with a final yield of 4.2mg Cwht1p per liter of growth culture. To test catalytic activity, we developed a modified synthesis of a tetrasaccharide substrate, Glc(3)ManOMe. Cwht1p with Glc(3)ManOMe shows a K(m) of 1.26 mM. Cwht1p crystals were grown and subjected to X-ray irradiation, giving a complete diffraction dataset to 2.04 ? resolution. Work is ongoing to obtain phases so that we may further understand this fundamental member of the N-glycosylation pathway through the discovery of its molecular structure.