Submicroscopical changes in Klebsiella pneumoniae cells treated with concentrated sucrose and polyethylene glycol 400 solutions

This study reports the extent and character of plasmolysis and other morphological changes as shown by electron microscopy in a strain of Klebsiella pneumoniae and with sucrose or polyethylene glycol 400 (PEG-400) as the plasmolysing agent at a water activity of 0.935.
Both solutes produced severe plasmolysis in K. pneumoniae cells; PEG-400 also caused some cell wall collapse and fingerlike extrusions to emerge from the bacterial cell.     

Tracheary element differentiation is correlated with inhibition of cell expansion in xylogenic mesophyll suspension cultures.

To test the hypothesis that xylogenesis is coupled to cell growth suppression, cell expansion in Zinnia elegans L. var. Envy mesophyll suspension cultures was manipulated by varying the extracellular osmolarity and the effect on xylogenesis was examined. Cell expansion and tracheary element differentiation were inversely related along a gradient of extracellular osmolarity ranging from 200 to 400 mOsm, supporting the hypothesis that tracheary element differentiation is coupled to cessation of cell expansion. Above 300 mOsm, reduction in the number of cells that differentiated into tracheary elements coincided with an increase in the number of plasmolyzed cells as extracellular osmolarity was increased, indicating that plasmolysis inhibits tracheary element differentiation, although not specifically. Using the plasmolysis method we showed that cellular osmolarity within populations of isolated Zinnia mesophyll cells ranges from 250 to 600 mOsm with a mean of 425 mOsm. The broad range in cellular osmolarity within Zinnia mesophyll cell populations, coupled with inhibition of differentiation in the low range due to cell expansion and in the high range due to plasmolysis, may help explain why tracheary element differentiation in Zinnia suspension cultures is never complete nor perfectly synchronous and enable further optimization of this culture system.     

Radioprotective effect of polyethylene glycol

Polyethylene glycol of molecular weight 400 (PEG-400) had a radioprotective effect of about 20% against lethality when given ip 20 min prior to single or fractionated X-ray doses to the head and neck. Dose modification factors (DMF) based on LD50/15 values ranged from 1.14 to 1.24. A similar DMF of 1.12 based on LD50/30 values was obtained using single doses of whole-body X irradiation. Mice given head and neck irradiation had significantly reduced rectal temperatures (31.3 +/- 3.0 degrees C) 9 days post irradiation compared with unirradiated controls (35.4 +/- 0.6 degrees C). No such reduction was observed when PEG-400 was given with radiation (36.3 +/- 0.9 degrees C). PEG-400 also lessened, but not significantly, the frequency of shivering in irradiated animals. Histopathologic examination of the oral structures demonstrated only marginal protection by PEG-400. Estimation of the alpha/beta ratio from LD50 data on head and neck-irradiated mice yielded values of 4.4 +/- 1.9 (95% confidence limits) Gy without PEG-400 and 7.9 +/- 1.4 Gy with PEG-400. Since it is a non-thiol radioprotector, PEG-400 may be more useful when combined with more conventional thiol-containing radioprotectors.     

Synergistic effect of PEG-400 and cyclodextrin to enhance solubility of progesterone

Conclusion  PEG-400, polysorbate 80, and 2 CDs (Trappsol HPB and Captisol) were used in an attempt to improve the aqueous solubility of a model hydrophobic drug, progesterone. The aqueous solubility of progesterone improved significantly from 0.007 mg/mL by the addition of PEG-400, CDs, and polysorbate 80. In systems containing various amounts of PEG-400 and 3% Trappsol HPB in water (% wt/wt), the theoretical solubility was calculated by adding the solubilities in the individual systems. The observed solubility values were up to 96% higher than the theoretical values. The effect of synergism was significant in 5% to 50% PEG-400/water systems containing Trappsol HPB. Systems containing Captisol did not show such synergistic effects. In general, the addition of polysorbate 80 to the PEG-400/water systems containing CDs affected synergism negatively.     

Low versus high molecular weight poly(ethylene glycol)-induced states of stem bromelain at low pH: stabilization of molten globule and unfolded states

The effect of low, medium, and high molecular weight poly(ethylene glycol) (e.g., PEG-400, -6000, and -20,000) on the structure of the acid unfolded state of unmodified stem bromelain (SB) obtained at pH 2.0 has been studied by various spectroscopic methods. The conformation of stem bromelain at pH 2.0 exhibits substantial loss of secondary structure and almost complete loss of native tertiary contacts and has been termed the acid unfolded state (A(U)). Addition of PEG-400 to A(U) led to an increase in the mean residue ellipticity (MRE) value at 222 nm, indicating formation of alpha-helical structure. On the other hand, PEG-6000 and 20,000 led to a decrease in the MRE value at 222 nm, indicating unfolding of the A(U) state. Interestingly, at 70% (w/v) PEG-400 and 40% (w/v) PEG-20,000, MRE values at 222 nm almost approach the native state at pH 7.0 and the unfolded state (6 M GnHCl) of stem bromelain, respectively. The probes for tertiary structure showed formation of nonnative tertiary contacts in the presence of 70% (w/v) PEG-400, while 40% (w/v) PEG-6000 and 20,000 were found to stabilize the unfolded state of SB. An increase in binding of 1-anilino 8-naphthalene sulfonic acid and a decrease in fractional accessibility of tryptophan residues (f(a)) compared to A(U) in the presence of 70% PEG-400 indicate that the PEG-400-induced state has a significant amount of exposed hydrophobic patches and is more compact than A(U). The results imply that the PEG-400-induced state has characteristics of molten globule, and higher molecular weight PEGs led to the unfolding of the A(U) state.     

Deciphering aggregates,prefibrillar oligomers and protofibrils of cytochrome c

Aggregation of protein into insoluble intracellular complexes and inclusion bodies underlies the pathogenesis of human neurodegenerative diseases. Importance of cytochrome c (cyt c) arises from its involvement in apoptosis, sequence homology and for studying molecular evolution. A systemic investigation of polyethylene glycol (PEG) and trifluoroethanol (TFE) on the conformational stability of cyt c as a model hemeprotein was made using multi-methodological approach. Cyt c exists as molten globule (MG) at 60 % PEG-400 and 40 % TFE as confirmed by far-UV CD, attenuated total reflection Fourier transform infrared spectroscopy, Trp environment, 8-anilino-1-naphthalene-sulfonic acid (ANS) binding and blue shift in the soret band. Q-band splitting in MG states specifies conformational changes in the hydrophobic heme-binding pocket. Aggregates were detected at 90 % PEG-400 and 50 % TFE as confirmed by increase thioflavin T and ANS fluorescence and shift in Congo red absorbance. Detection of prefibrils and protofibrils at 90 % PEG-400 and 50 % TFE was possible after 72-h incubation. Single cell gel electrophoresis of prefibrils and protofibrils showed DNA damage confirming their toxicity and potential health hazards. Scanning electron microscopy and XRD analysis confirmed prefibrillar oligomers and protofibrils of cyt c.     

Transition of a Compact Intermediate State of Pea Lectin Under the Influence of Different Molecular Weight Polyethylene Glycols

The compact intermediate of the pea lectin found to exist at pH 2.4 was treated with low (PEG-400), medium (PEG-4000) and high (PEG-20,000) molecular weight PEGs. The changes occurring in the secondary structure of the protein were monitored by CD spectropolarimetry in the far-UV range, intrinsic fluorescence was used as a probe to observe the changes in the tertiary structure which is reflected by the changes in the tryptophan environment, further ANS binding studies were made to know the extent of exposure of the hydrophobic patches which is again indicative of the overall changes occurring in the tertiary structure of the protein. It was found that the three PEGs altered the secondary as well as tertiary structure of the pH 2.4 intermediate leading to the formation of three different intermediates. The intermediates were found to have non-native secondary structure as well as non-native tertiary structure. The intermediate formed by the action of PEG-400 was due to the induction of secondary and tertiary structure while the intermediates formed under the influence of PEG-4000 and PEG-20,000 were due to loss in secondary structure and rearrangement in tertiary structure. Also the ANS binding studies showed the absence of any MG or MG-like structures formed in the folding /unfolding pathway induced by PEGs.     

Behaviour of plasma membrane, cortical ER and plasmodesmata during plasmolysis of onion epidermal cells

During plasmolysis of onion epidermal cells, the contracting protoplast remains connected to the cell wall by an intricate, branched system of plasma membrane (PM) ‘Hechtian strands’ which stain strongly with the fluorescent probe DiOC₆. In addition, extensive regions of the cortical endoplasmic reticulum (ER) network remain anchored to the cell wall during plasmolysis and do not become incorporated into the contracting protoplast with the other cell organelles. These ER profiles become tightly encased by the PM as the latter contracts towards the centre of the cell. Thus, although the cortical ER is left outside the main protoplast body, it is nonetheless still bound by the PM of the cell. As well as being anchored to the wall, the cortical ER remains intimately linked with plasmodesmata and retains continuity between cells via the central desmotubules which become distended during plasmolysis. The PM also remains in close contact with the plasmodesmatal pore following plasmolysis. It is suggested that plasmodesmata, although sealed, may not be broken during plasmolysis, their substructure being preserved by continuity of both ER and PM through the plasmodesmatal pore. A structural model is presented which links the behaviour of PM, ER and plasmodesmata during plasmolysis.     

Structural intermediates of acid unfolded Con-A in different co-solvents: fluoroalcohols and polyethylene glycols

A molten globule-like intermediate of Con-A was obtained when subjected to acid unfolding. At pH 2 the intermediate was found to have native-like secondary structure, somewhat denatured tertiary structure and maximum ANS binding. Further the stability of this intermediate was studied in presence of fluoroalcohols (TFE and HFIP) and polyethylene glycols (PEG-400, 4000 and 20,000). Secondary structural changes were monitored by far-UV CD while alterations in the tertiary structure of the acid unfolded intermediate were probed by near-UV CD. To study the environment and position of the tryptophan residues present intrinsic fluorescence studies were performed. ANS binding studies were also made to know the extent of exposure of the hydrophobic patches. Using the above-mentioned techniques it was found that in presence of fluoroalcohols the pH 2 intermediate was transformed to a state with predominant alpha-helical secondary and denatured tertiary structures. In the pathway of these transformations MG-like intermediates were formed at 10% TFE and 6% HFIP. The folding intermediate of Con-A obtained at pH 2 underwent a series of conformational changes when exposed to different molecular weight PEGs. Secondary structure was induced by low molecular weight PEG-400 and low concentrations of PEG-4000 and PEG-20,000 while at higher concentrations transition in structure was observed. Tertiary structure was stabilized only at low concentrations of PEG-400. PEG-4000 and PEG-20,000 in the whole concentration range resulted in the loss of tertiary structure.     

Plasmolysis and Cell Shape Depend on Solute Outer-Membrane Permeability during Hyperosmotic Shock in E. coli

The concentration of chemicals inside the bacterial cytoplasm generates an osmotic pressure, termed turgor, which inflates the cell and is necessary for cell growth and survival. In Escherichia coli, a sudden increase in external concentration causes a pressure drop across the cell envelope that drives changes in cell shape, such as plasmolysis, where the inner and outer membranes separate. Here, we use fluorescence imaging of single cells during hyperosmotic shock with a time resolution on the order of seconds to examine the response of cells to a range of different conditions. We show that shock using an outer-membrane impermeable solute results in total cell volume reduction with no plasmolysis, whereas a shock caused by outer-membrane permeable ions causes plasmolysis immediately upon shock. Slowly permeable solutes, such as sucrose, which cross the membrane in minutes, cause plasmolysis to occur gradually as the chemical potential equilibrates. In addition, we quantify the detailed morphological changes to cell shape during osmotic shock. Nonplasmolyzed cells shrink in length with an additional lateral size reduction as the magnitude of the shock increases. Quickly plasmolyzing cells shrink largely at the poles, whereas gradually plasmolyzing cells invaginate along the cell cylinder. Our results give a comprehensive picture of the initial response of E. coli to hyperosmotic shock and offer explanations for seemingly opposing results that have been reported previously.     

Transmembrane Protein (Perfringolysin O) Association with Ordered Membrane Domains (Rafts) Depends Upon the Raft-Associating Properties of Protein-Bound Sterol

The concentration of chemicals inside the bacterial cytoplasm generates an osmotic pressure, termed turgor, which inflates the cell and is necessary for cell growth and survival. In Escherichia coli, a sudden increase in external concentration causes a pressure drop across the cell envelope that drives changes in cell shape, such as plasmolysis, where the inner and outer membranes separate. Here, we use fluorescence imaging of single cells during hyperosmotic shock with a time resolution on the order of seconds to examine the response of cells to a range of different conditions. We show that shock using an outer-membrane impermeable solute results in total cell volume reduction with no plasmolysis, whereas a shock caused by outer-membrane permeable ions causes plasmolysis immediately upon shock. Slowly permeable solutes, such as sucrose, which cross the membrane in minutes, cause plasmolysis to occur gradually as the chemical potential equilibrates. In addition, we quantify the detailed morphological changes to cell shape during osmotic shock. Nonplasmolyzed cells shrink in length with an additional lateral size reduction as the magnitude of the shock increases. Quickly plasmolyzing cells shrink largely at the poles, whereas gradually plasmolyzing cells invaginate along the cell cylinder. Our results give a comprehensive picture of the initial response of E. coli to hyperosmotic shock and offer explanations for seemingly opposing results that have been reported previously.     

Identification, effective purification and functional characterization of dextransucrase from Leuconostoc mesenteroides NRRL B-640

The extracellular dextransucrase from Leuconostoc mesenteroides NRRL B-640 was purified using polyethylene glycol fractionation (PEG) and gel-filtration. The cell free extract was subjected to fractionation by PEG-200, 400 and 1500. The 10% (w/v) PEG-1500 gave dextransucrase with maximum specific activity of 23 with 40 fold purification in a single step. The purified enzyme showed multiple molecular forms on SDS-PAGE, however the same sample showed a single band on non-denaturing native-PAGE. The purified dextransucrase fractions obtained from PEG-1500, confirmed the presence of dextran, when run on SDS-PAGE under non-denaturing gels for in situ activity detection by Periodic Acid Schiff's staining. The activity bands corresponded to the native and active form of the purified dextransucrase of approximately, 180kDa molecular size, that appeared on the denaturing gels stained with Coomassie Brilliant Blue. No bands appeared after staining the activity of dextransucrase on non denaturing SDS-PAGE gels with raffinose, which excluded the presence of fructosyltransferases. Further purification of 10% PEG-1500 purified dextransucrase by gel-filtration gave dextransucrase with specific activity of 35 with 61 fold purification.     

Compartmentalization of the periplasmic space at division sites in gram-negative bacteria.

Phase-contrast and serial-section electron microscopy were used to study the patterns of localized plasmolysis that occur when cells of Salmonella typhimurium and Escherichia coli are exposed to hypertonic solutions of sucrose. In dividing cells the nascent septum was flanked by localized regions of periseptal plasmolysis. In randomly growing populations, plasmolysis bays that were not associated with septal ingrowth were clustered at the midpoint of the cell and at 1/4 and 3/4 cell lengths. The localized regions of plasmolysis were limited by continuous zones of adhesion that resembled the periseptal annular adhesion zones described previously in lkyD mutants of S. typhimurium (T. J. MacAlister, B. MacDonald, and L. I. Rothfield, Proc. Natl. Acad. Sci. USA 80:1372-1376, 1983). When cell division was blocked by growing divC(Ts) cells at elevated temperatures, the localized regions of plasmolysis were clustered along the aseptate filaments at positions that corresponded to sites where septum formation occurred when cell division was permitted to resume by a shift back to the permissive temperature. Taken together the results are consistent with a model in which extended zones of adhesion define localized compartments within the periplasmic space, predominantly located at future sites of cell division.     

The use of 1H-NMR spectroscopy and refractometry for investigation of the distribution of nonelectrolytes of N-alcohol series between human red blood cells and extracellular medium

Comparative analysis of 1H NMR spectroscopy and refractometry with respect to their application for investigating the distribution of nonelectrolytes of n-alcohol series (ethanol, 1,2-propanediol, glycerol) and polyethylene glycols (PEGs) with molecular masses of 400, 600, 1500 between human erythrocytes and extracellular medium was performed. The distribution coefficients (Q) for solutions of ethanol, 1,2-propanediol, glycerol, PEG-400, PEG-600 and PEG-1500 were obtained. The Q values decreased with the increase in the nonelectrolyte molecular mass from 1.23+/-0.12 for ethanol to 0.40+/-0.08 for PEG-1500 (1H NMR spectroscopy) and from 2.6+/-0.12 for ethanol to 0.23+/-0.03 for PEG-1500 (refractometry). It was shown that 1H-NMR high-resolution spectroscopy ensures more precise determination of Q values for nonelectrolytes with low molecular masses; for PEGs with high molecular masses, the accuracy of Q value calculation by this method was about 20%. On the contrary, refractometry can be used for investigating substances with high molecular masses; the error of Q value determination for solution of low-refractive substances, such as ethanol, may be more than 50%.     

An approach for increasing the mass recovery of proteins derived from inclusion bodies in biotechnology

A method for increasing the mass recovery of therapeutic proteins produced by E. coli using liquid chromatography was investigated. Recombinant human interferon-gamma (rhIFN-gamma) produced by E. coli was selected as a model therapeutic protein, and hydrophobic interaction chromatography (HIC) was performed as a model for liquid chromatography. Using seven types of stationary phase hydrophobic interaction chromatography (STHIC) with different end groups, the effect of the stationary phase on the mass recovery during protein folding by liquid chromatography (LC) and the causes of mass loss of rhIFN-gamma during its folding with simultaneous purification were investigated. Also strategies for increasing mass recovery are proposed. The results demonstrate that the mass recovery of rhIFN-gamma increases with the decreasing hydrophobicity for six STHIC with end groups of PEG-200, PEG-400, PEG-600, PEG-1000, furfural, and phenyl, except for PEG-1000. However, for oxethyl and PEG-600, even though the same diol end group is bonded to PEG-600, so long as the PEG-600 is modified by acetyl chloride, it can effectively enhance the mass and bioactivity recovery of rhIFN-gamma compared to the PEG-600 column. The effect of sample size including both mass and volume on the mass recovery of the rhIFN-gamma was also investigated. Last, redissolving the target protein that has irreversibly adsorbed to the stationary phase and re-injecting it onto the column is an approach for increasing mass recovery.     

PAN- b- PEG- b- PAN 两亲性嵌段共聚物的合成及热稳定性

以2-溴丙酰溴封端的聚乙二醇（PEG2000）为大分子引发刺,溴化亚铜（CuBr）为催化剂,2,2＇-联吡啶（bpy）为配体,碳酸乙烯酯（EC）为溶剂,采用原子转移自由基聚合（ATRY）法合成了两亲性嵌段共聚物PAN-b-PEG-b-PAN。通过FTIR、^1HNMR和GPC对产物的结构进行了表征,并运用TGA对PAN-b-PEG-b-PAN两亲性嵌段共聚物的热稳定性进行了研究。结果表明：PAN-b-PEG-b-PAN的热稳定性较纯PEG要高,且随着PAN-b-PEG-b-PAN两亲性嵌段共聚物的分子量的增加,此嵌段共聚物的热稳定性增强。它的起始的分解温度为275℃,在275℃-450℃失重较少,失重率约为15％,在400℃-450℃迅速分解,失重率为60％左右。     

Poly(ethylene glycol)-mediated molar mass control of short-chain- and medium-chain-length poly(hydroxyalkanoates) from Pseudomonas oleovorans

Three strains of Pseudomonas oleovorans, a well known poly(hydroxyalkanoate) (PHA) producer, were tested for the ability to control PHA molar mass and end group structure by addition of poly(ethylene glycol) (PEG) to the fermentation medium. Each strain of P. oleovorans - NRRL B-14682 (B-14682), NRRL B-14683 (B-14683), and NRRL B-778 (B-778) - synthesized a different type of PHA from oleic acid when cultured under identical growth conditions. Strain B-14682 produced poly(3-hydroxybutyrate) (PHB), while B-14683 synthesized a medium-chain-length PHA ( mcl-PHA) with a repeat unit composition ranging from C4 to C14 and some mono-unsaturation in the C14 alkyl side chains. Strain B-778 synthesized a mixture of PHB (95 mol%) and mcl-PHA (5 mol%). The addition of 0.5% (v/v) PEG (M(n) =200 g/mol, PEG-200) to the fermentation broth of strains B-14682 and B-778 resulted in chain termination through esterification at the carboxyl terminus of the PHB with PEG chain segments, thus reducing the molar mass by 54% and 23%, respectively. The molar mass of the mcl-PHA produced by strains B-14683 and B-778 also showed a 34% and 47% reduction in the presence of PEG-200, respectively, but no evidence of esterification was present. PEG-400 (M(n) =400 g/mol) had a reduced effect on PHA molar mass. In fact, the molar masses of the mcl-PHA derived from strain B-14683 and both the PHB and mcl-PHA from B-778 were unchanged by PEG-400. In contrast, the PHB produced by B-14682 showed a 35% reduction in molar mass in the presence of PEG-400.     

Amount of leachant and water absorption levels of wood treated with borates and water repellents

Wood protection efficacy of borates against biological agents, flame retardancy, and suitability to the environment is well known. Since borates can be applied to timber as water based solutions, they are preferred economically as well. Even though they are highly mobile in wood, boron compounds are widely used in timber preservation. Borates migrate in liquid and increase the hygroscopicity of wood in damp conditions. This study deals with the physical restriction of water access in wood by impregnating water repellent agents into wood to limit amount of leachant and water absorption levels of wood after boron treatment. Borates were incorporated with polyethylene glycol-400 (PEG-400) their bulking effect in wood was considered. Results indicated that the amount of leachates from wood treated with borates in PEG-400 was remarkably higher compared to those of wood treated with the aqueous solutions of borates. Water absorption (WA) levels of wood treated with aqueous solutions of borates were higher than those of their treated samples with the solutions in PEG-400. Secondary treatments of wood with the water repellent (WR) chemicals following borate impregnation reduced the leaching of chemicals from wood in water and also WA of the specimens were less than those of the wood treated with only borates from aqueous and PEG solutions. Styrene (St) was the most effective monomer among the other agents used in terms of immobility effect on borates and WA.