Purification of cobalt-activated acylase by affinity chromatography

alpha-Hydroxyisocaproyltyrosine (HyIc-Tyr-OH), a potent competitive inhibitor of the cobalt-activated acylase form 2, was synthesized. Its derivative, alpha-aminopentyl-HyIc-Tyr-OEt was coupled to cyanogen bromide-activated Sepharose 4B and was used for about 100-fold purification of the acylase from human liver by affinity chromatography. The preparation obtained did not show aminoacylase, aspartyl acylase or alanylarylamidase activities. The same chromatographic method was also applied to isolate form 2 of the serum acylase from patients with viral hepatitis and guinea pig placenta.     

Directed evolution of a glutaryl acylase into an adipyl acylase.

Semi-synthetic cephalosporin antibiotics belong to the top 10 of most sold drugs, and are produced from 7-aminodesacetoxycephalosporanic acid (7-ADCA). Recently new routes have been developed which allow for the production of adipyl-7-ADCA by a novel fermentation process. To complete the biosynthesis of 7-ADCA a highly active adipyl acylase is needed for deacylation of the adipyl derivative. Such an adipyl acylase can be generated from known glutaryl acylases. The glutaryl acylase of Pseudomonas SY-77 was mutated in a first round by exploration mutagenesis. For selection the mutants were grown on an adipyl substrate. The residues that are important to the adipyl acylase activity were identified, and in a second round saturation mutagenesis of this selected stretch of residues yielded variants with a threefold increased catalytic efficiency. The effect of the mutations could be rationalized on hindsight by the 3D structure of the acylase. In conclusion, the substrate specificity of a dicarboxylic acid acylase was shifted towards adipyl-7-ADCA by a two-step directed evolution strategy. Although derivatives of the substrate were used for selection, mutants retained activity on the beta-lactam substrate. The strategy herein described may be generally applicable to all beta-lactam acylases.     

胞外青霉素酰化酶产生菌的选育

利用纸片显色方法,从土壤甲诀速筛选出98株产胞外青霉素酰化酶的菌种,经复筛其中10株酶活力较高,经鉴定均属于巨大芽孢杆菌。经单株分离得46号菌,用这株菌进行了产酶条件的研究,在最适产酶条件下,酶话力比开始提高了3．6倍。在此基础上又进行了物理化学因素处理,得突变株UL-81,酶活力达720u／1 Ooml发酵液。对原株和突变株进行比较,发现UL-81菌落、细胞形态、诱导剂苯乙酸用量及添加时间等明显不同于原株。在500L罐发酵酶活达8 20u／1OOml发酵液,为开始酶活的16倍。     

Cephalosporin C acylase and penicillin V acylase formation by Aeromonas sp. ACY 95

Aeromonas sp. ACY 95 produces constitutively and intracellularly a penicillin V acylase at an early stage of fermentation (12 h) and a cephalosporin C acylase at a later stage (36 h). Some penicillins, cephalosporin C and their side chain moieties/analogues, phenoxyacetic acid, penicillin V and penicillin G, enhanced penicillin V acylase production while none of the test compounds affected cephalosporin C acylase production. Supplementation of the medium with some sugars and sugar derivatives repressed enzyme production to varying degrees. The studies on enzyme formation, induction and repression, and substrate profile suggest that the cephalosporin C acylase and penicillin V acylase are two distinct enzymes. Substrate specificity studies indicate that the Aeromonas sp. ACY 95 produces a true cephalosporin C acylase which unlike the enzymes reported hitherto hydrolyses cephalosporin C specifically.The authors are with Research and Development, Hindustan Antibiotics Limited, Pimpri. Pune 411 018, India     

Newly discovered penicillin acylase activity of aculeacin A acylase from Actinoplanes utahensis

Aculeacin A acylase from Actinoplanes utahensis produced by Streptomyces lividans revealed acylase activities that are able to hydrolyze penicillin V and several natural aliphatic penicillins. Penicillin K was the best substrate, showing a catalytic efficiency of 34.79 mM(-1) s(-1). Furthermore, aculeacin A acylase was highly thermostable, with a midpoint transition temperature of 81.5 degrees C.     

Leakage of recombinant penicillin G acylase from Escherichia coli by adding chloroform under fermentation conditions

A simple method was developed to release periplasmic penicillin G acylase from Escherichia coli BL21(DE3) during the fermentation process. More than 80% of the total penicillin G acylase was released into the broth when 3% (v/v) chloroform was added at 3 h after induction. The activity of extracellular penicillin G acylase reached 20699 U/l. This method was efficient and would facilitate further investigation of penicillin G acylase for industrial applications.     

Penicillin G acylase fromKluyvera citrophila new choice as industrial enzyme

Summary We propose a new and integrated method for the evaluation of industrial enzymes. The application of this method to the enzyme penicillin G acylase fromKlyvera citrophila shows very interesting industrial propects. This acylase presents a much better stability agains heat, pH or organic cosovents as compared with the more popular enzyme fromEscherichia coli. In addition, this enzyme is very easy to immobilize through its amine groups and to stabilize through multipoint covalent attachment on activated pre-existing supports.     

Improvement of the glutaryl-7-aminocephalosporanic acid acylase activity of a bacterial gamma-glutamyltranspeptidase

7-Aminocephalosporanic acid (7-ACA) is an important material in the production of semisynthetic cephalosporins, which are the best-selling antibiotics worldwide. 7-ACA is produced from cephalosporin C via glutaryl-7-ACA (GL-7-ACA) by a bioconversion process using d-amino acid oxidase and cephalosporin acylase (or GL-7-ACA acylase). Previous studies demonstrated that a single amino acid substitution, D433N, provided GL-7-ACA acylase activity for gamma-glutamyltranspeptidase (GGT) of Escherichia coli K-12. In this study, based on its three-dimensional structure, residues involved in substrate recognition of E. coli GGT were rationally mutagenized, and effective mutations were then combined. A novel screening method, activity staining followed by a GL-7-ACA acylase assay with whole cells, was developed, and it enabled us to obtain mutant enzymes with enhanced GL-7-ACA acylase activity. The best mutant enzyme for catalytic efficiency, with a k(cat)/K(m) value for GL-7-ACA almost 50-fold higher than that of the D433N enzyme, has three amino acid substitutions: D433N, Y444A, and G484A. We also suggest that GGT from Bacillus subtilis 168 can be another source of GL-7-ACA acylase for industrial applications.     

Biochemical characterization of a glutaryl-7-aminocephalosporanic acid acylase from Pseudomonas strain BL072.

Pseudomonas strain BL072 produces an acylase enzyme active in hydrolyzing glutaryl-7-aminocephalosporanic acid to 7-aminocephalosporanic acid. This acylase was purified by column chromatography and gel electrophoresis. The native acylase was composed of two subunits of approximately 65 and 24 kDa, though some heterogeneity was seen in both the native acylase and its small subunit. The isoelectric point of the acylase is approximately 8.5, and it has Km of 1.6 mM for glutaryl desacetoxy aminocephalosporanic acid. The acylase hydrolyzes the desacetoxy and desacetyl derivatives of glutaryl-7-aminocephalosporanic acid at rates similar to that of glutaryl-7-aminocephalosporanic acid. Cephalosporin C was hydrolyzed at a reduced rate. The pH optimum was found to be 8.0, and an activation energy of 9 kcal/mol (ca. 38 kJ/mol) was observed. The acylase has transacylase activity 10 times that of its hydrolytic activity. Eupergit C-immobilized acylase had a half-life of greater than 400 h.     

The 2.0 A crystal structure of cephalosporin acylase

BACKGROUND: Semisynthetic cephalosporins are primarily synthesized from 7-aminocephalosporanic acid (7-ACA), which is usually obtained by chemical deacylation of cephalosporin C (CPC). The chemical production of 7-ACA includes, however, several expensive steps and requires thorough treatment of chemical wastes. Therefore, an enzymatic conversion of CPC to 7-ACA by cephalosporin acylase is of great interest. The biggest obstacle preventing this in industrial production is that cephalosporin acylase uses glutaryl-7ACA as a primary substrate and has low substrate specificity for CPC. RESULTS: We have solved the first crystal structure of a cephalosporin acylase from Pseudomonas diminuta at 2.0 A resolution. The overall structure looks like a bowl with two "knobs" consisting of helix- and strand-rich regions, respectively. The active site is mostly formed by the distinctive structural motif of the N-terminal (Ntn) hydrolase superfamily. Superposition of the 61 residue active-site pocket onto that of penicillin G acylase shows an rmsd in Calpha positions of 1.38 A. This indicates structural similarity in the active site between these two enzymes, but their overall structures are elsewhere quite different. CONCLUSION: The substrate binding pocket of the P. diminuta cephalosporin acylase provides detailed insight into the ten key residues responsible for the specificity of the cephalosporin C side chain in four classes of cephalosporin acylases, and it thereby forms a basis for the design of an enzyme with an improved conversion rate of CPC to 7-ACA. The structure also provides structural evidence that four of the five different classes of cephalosporin acylases can be grouped into one family of the Ntn hydrolase superfamily.     

An improved method to clone penicillin acylase genes: Cloning and expression in Escherichia coli of penicillin G acylase from Kluyvera citrophila

A simple and versatile procedure to clone penicillin acylase genes has been developed. It involves the construction of a plasmid library in a host presenting an amino acid auxotrophy. Recombinant clones carrying the acylase gene were selected on a minimal medium containing instead of the required amino acid its phenylacetyl derivative. Penicillin acylase genes from Escherichia coli ATCC 11105 and Kluyvera citrophila ATCC 21285 have been cloned in E. coli using this technique. The restriction map of the region containing the E. coli penicillin acylase gene was found to be similar to that described by H. Mayer et al. (in: Plasmids of Medical, Environmental and Commercial Importance (Timmis, K.M. and Paler, A., eds.), pp. 459–470, Elsevier, Amsterdam 1979). K. citrophila acylase gene was located within a 3.0 kb Hind III-PvuI fragment. Some differences were observed between the partial restriction maps of both genes. In addition, the production of those clones carrying the E. coli acylase was more sensitive to the growth temperature than that of the clones containing the K. citrophila gene. Bacteria harbouring plasmids containing the K. citrophila acylase sequence were able to produce about 30 fold more enzyme than the parental strain. A 60 000 dalton polypeptide corresponding to the K. citrophila acylase has been detected in a maxicell system. The industrial applications of the procedure are discussed.     

Kinetic behavior of immobilized Penicillin acylase

Penicillin acylase has been immobilized to carboxymethylcellulose and to the resin Amberlite XAD7. The reaction kinetics of the enzyme were affected by both intrinsic (molecular) and microenvironmental effects. The Michaelis constant for the enzyme increased after immobilization as a result of an intrinsic effect of the reagent, glutaraldehyde, used for enzyme immobilization. Microenvironmental effects were of two types: diffusional limitation of access of substrate and a reaction-generated pH depression in the support particles. This depression of internal pH was observed in all the preparations and could be reduced by addition of pH buffering salts to reactor. An adsorbed pH-indicating dyc was used to determine the surface and internal pH of particles of XAD7–penicillin acylase under various reaction conditions. The extent of diffusional rate limitation in XAD7–penicillin acylase was related to the penetration depth of protein into the porous support particles. The penetration depth of protein and thus the diffusional limitation of the reaction rate could be controlled by the conditions of preparation of the immobilized enzyme. A staining technique was used to observe the location of the protein.     

Determination of penicillinase and acylase by chromatography on a thin layer of sorbent in the case of their joint formation by different strains]

The products of penicillinase and acylase hydrolysis of benzylpenicillin were studied with a method of sorbent thin-layer chromatography. The method provided qualitative determination and differentiation of penicillinase and acylase activity in cultures of E. coli capable of simultaneous production of both enzymes. It was shown that when the cultures of E. coli were grown under conditions optimal for acylase production, the amounts of penicillinase were insignificant.     

Fluorogenic assay for penicillin G acylase activity

A simple, highly sensitive, and rapid assay for high-throughput screening of penicillin G acylase-producing bacteria is presented. The method is based on the specific release of fluorescent 7-amino-4-methyl-coumarin through cleavage of phenylacetyl-4-methyl-coumaryl-7-amide by penicillin G acylase. The present method is suitable for screening pure enzymes as well as various penicillin G acylases like those from Escherichia coli, Proteus rettgeri, and Kluyvera citrophila in cell extracts. In addition, the new substrate was used for rapid assay of amidase activity in nondenaturing polyacrylamide gels.     

Biosynthesis of penicillin V acylase by Fusarium sp.: effect of culture conditions

Penicillin V acylase was produced, both intracellularly and extracellularly, by Fusarium sp. SKF 235 grown in submerged fermentation. When neopeptone was added to the medium, >95% of the penicillin V acylase was extracellular. In the absence of a complex organic nitrogen source, the fungus produced low levels of totally intracellular penicillin V acylase. MgSO₄ was essential for synthesis of the enzyme, which was induced by phenoxyacetic acid and penicillin V. The maximum yield of penicillin V acylase was 430 IU/g dry cell wt. The optimum pH value and temperature for the penicillin V acylase were 6.5 and 55°C, respectively.     

Two novel engineered bacteria for secretory expression of glutaryl 7-amino-cephalosporanic acid acylase

Two novel engineered bacteria, BL21(DE3)/pETCA1S and TG1/pSuperCA1S, were obtained which can secretory express the gene encoding glutaryl 7-amino-cephalosporanic acid acylase (GL-7ACA acylase) from Pseudomonas sp. 130 with high activity. The growth conditions of transformants for overproduction of GL-7ACA acylase were optimized: in intact cells of BL21(DE3)/pETCA1S and TG1/pSuperCA1S the activity of GL-7ACA acylase was 415 and 600 units g^–1 dry cells, respectively. The highest specific activity of GL-7-ACA acylase is in the intact cell as compared with that of transformants constructed in our laboratory. In fiftieth generation of mutants transferred on agar plates the specific activity of GL-7ACA acylase remained constant.     

Cloning and characterization of penicillin V acylase from Streptomyces mobaraensis

We report on the molecular cloning and characterization of penicillin V acylase (PVA) from an actinomycete, Streptomyces mobaraensis (Sm-PVA), which was originally isolated as an acylase that efficiently hydrolyzes the amide bond of various N-fatty-acyl-l-amino acids and N-fatty-acyl-peptides as well as capsaicin (8-methyl-N-vanillyl-6-nonenamide). In addition, the purified Sm-PVA hydrolyzed penicillin V with the highest activity (k(cat)) among the PVAs so far reported, penicillin G, and 2-nitro-5-phenoxyacetamide benzoic acid. The BLAST search revealed that the Sm-PVA precursor is composed of a polypeptide that is characteristic of enzymes belonging to the beta-lactam acylase family with four distinct segments; a signal sequence (43 amino acids), an alpha subunit (173 amino acids), a linker peptide (28 amino acids), and a beta subunit (570 amino acids). The mature, active Sm-PVA is a heterodimeric protein with alpha and beta subunits, in contrast to PVAs isolated from Bacillus sphaericus and B. subtilis, which have a homotetrameric structure. The amino acid sequence of Sm-PVA showed identities to PVA from S. lavendulae, N-acylhomoserine lactone-degrading acylase from Streptomyces sp., cyclic lipopeptide acylase from Streptomyces sp., and aculeacin A acylase from Actinoplanes utahensis with 68, 67, 67, and 41% identities, respectively.     

Biospecific immobilization of mannan-penicillin G acylase neoglycoenzyme on Concanavalin A-bead cellulose

The matter of this work was to evaluate possibilities of biospecific immobilization of synthetic mannan-penicillin G acylase neoglycoconjugate on Concanavalin A support. The conjugate containing 37% (w/w) of yeast mannan was prepared. Significant biospecific interaction of this neoglycoenzyme with Con A was confirmed by precipitation method. The biospecific sorption of conjugate was investigated using Concanavalin A-triazine bead celluloses MT-100 with different content of Con A (from 1.4 to 9.8 mgCon A/gwet support). The results obtained under optimal conditions were compared with those from covalent immobilization of PGA. The sorbent capacity was observed higher for covalent binding of enzyme. On the other hand, the biospecifically immobilized neoglycoenzyme retained a greater amount of initial activity. The maximum amount of 6.6mgimmobilizedneoglycoenzyme/gwet Con A-sorbent (18.1 U/g) was achieved. The amount as well as activity of immobilized mannan-penicillin G acylase was increased by its two multiple layering on surface of sorbent (10.1mg, respectively, 23.5 U/gwet sorbent). Determined storage and operational (using flow calorimetric method) stabilities of biospecifically immobilized enzyme, were similar, possibly somewhat higher that those of covalent bound penicillin G acylase.     

J1 acylase, a glutaryl-7-aminocephalosporanic acid acylase from Bacillus laterosporus J1, is a member of the alpha/beta-hydrolase fold superfamily

J1 acylase, a glutaryl-7-aminocephalosporanic acid acylase (GCA) isolated from Bacillus laterosporus J1, has been conventionally grouped as the only member of class V GCA, although its amino acid sequence shares less than 10% identity with members of other classes of GCA. Instead, it shows higher sequence similarities with Rhodococcus sp. strain MB1 cocaine esterase (RhCocE) and Acetobacter turbidans alpha-amino acid ester hydrolase (AtAEH), members of the alpha/beta-hydrolase fold superfamily. Homology modeling and secondary structure prediction indicate that the N-terminal region of J1 acylase has an alpha/beta-hydrolase folding pattern. The catalytic triads in RhCocE and AtAEH were identified in J1 acylase as S125, D264 and H309. Mutations to alanine at these positions were found to completely inactivate the enzyme. These results suggest that J1 acylase is a member of the alpha/beta-hydrolase fold superfamily with a serine-histidine-aspartate catalytic triad.     

Optimization of a pseudo-affinity process for penicillin acylase purification

A pseudo-affinity process for penicillin acylase (EC 3.5.1.11) purification using an affinity ligand (Ampicillin) attached on Sepharose 4B-CNBr was optimized. The enzyme adsorption on this affiant (Amp-Seph) is independent of pH between 5.5 and 8.8, in 100?mM phosphate containing 22% (w/v) ammonium sulphate. The desorption of the penicillin acylase from the affinity gels was carried out, the best desorption results being obtained through a non specific eluent, 100?mM phosphate pH 4.6 with 15% (w/v) ammonium sulphate. The best purification results were obtained with an enzymatic extract, produced through osmotic shock of Escherichia coli cells (3.7?IU/mg prot). With this extract and an affinity gel of Sepharose 4B-CNBr derivatized with ampicillin (3.8?μmol/cm³?gel), a maximum activity capacity adsorbed of 20?IU/cm³?gel was obtained for initial values of activity and protein concentration of 1.7?IU/cm³ and 0.4?mg prot/cm³, respectively. With the optimized eluent it was possible to obtain penicillin acylase in only one purification step with a desorption yield of enzyme activity higher than 90%. The penicillin acylase produced with this process was characterized by a maximum purity of 34?IU/mg prot, corresponding to a purification degree higher than 150 in relation to the lowest pure enzymatic extract. The enzyme purity of the eluted fractions was certified by SDS gel electrophoresis and liquid chromatography through a Mono Q column in a FPLC apparatus. The gel electrophoresis presented 4 main stained bands with 2 corresponding to α and β subunits of the penicillin acylase with equivalent molecular weights of 27 and 63?kDa. No external diffusion resistance on penicillin acylase and total protein adsorption on this affiant (Amp-Seph 3.8?μmol/cm³?gel) were observed for continuous adsorption processes performed at two different agitation speeds (120 and 400?rpm).