Differential reduction of interchain disulphide bonds of mouse immunoglobulin G

The relative lability of the interchain disulphide bonds of mouse G_2a-myeloma protein 5563 was studied as a function of 2-mercaptoethanol concentration. Analysis of partial-reduction mixtures by polyacrylamide-gel electrophoresis and microdensitometry showed that the disulphide bonds between light and heavy chains are much more susceptible to reduction than the bonds between heavy chains. At a low concentration of 2-mercaptoethanol (10mm) the major dissociable products of mouse immunoglobulin G are heavy-chain dimers and free light chains. These findings contrast with the reported behaviour of rabbit immunoglobulin G, for which the lability of inter-heavy-chain bonds was found to exceed that of the bonds linking light and heavy chains (Hong & Nisonoff, 1965); the relative stability of rabbit immunoglobulin G interchain bonds was confirmed in the present study. Examination of human immunoglobulin G and an immunoglobulin G (γ2) of guinea pig showed that at least in the majority of molecules, as with mouse immunoglobulin G, the disulphide bonds between light and heavy chains are more susceptible to reduction than the inter-heavy-chain bonds.     

Subunits of human alpha 2-macroglobulin produced by specific reduction of interchain disulfide bonds with thioredoxin

Disulfide bonds in alpha 2-macroglobulin (alpha 2M) were reduced with the thioredoxin system from Escherichia coli. Under the conditions selected, 3.5-4.1 disulfide bonds were cleaved in each alpha 2M molecule, as determined by the consumption of NADPH during the reaction and by the incorporation of iodo[3H]acetate into the reaction product. This extent of disulfide bond reduction, approximately corresponding to that expected from specific cleavage of all four interchain disulfide bonds of the protein, coincided with the nearly complete dissociation of the intact alpha 2M molecule to a species migrating as an alpha 2M subunit in gel electrophoresis, under both denaturing and nondenaturing conditions. The dissociation was accompanied by only small changes of the spectroscopic properties of the subunits, which thus retain a near-native conformation. Reaction of isolated subunits with methylamine or trypsin led to the appearance of approximately 0.55 mol of thiol group/mol of subunits, indicating that the thio ester bonds are largely intact. Moreover, the rate of cleavage of these bonds by methylamine was similar to that in the whole alpha 2M molecule. Although the bait region was specifically cleaved by nonstoichiometric amounts of trypsin, the isolated subunits had minimal proteinase binding ability. Reaction of subunits with methylamine or trypsin produced changes of farultraviolet circular dichroism and near-ultraviolet absorption similar to those induced in the whole alpha 2M molecule, although in contrast with whole alpha 2M no fluorescence change was observed. The methylamine- or trypsin-treated subunits reassociated to a tetrameric species, migrating as the "fast" form of whole alpha 2M in gradient gel electrophoresis.(ABSTRACT TRUNCATED AT 250 WORDS)     

The role of interchain disulfide bond in a recombinant human interleukin-17A variant

Interleukin-17A (IL-17A) is the prototype of IL-17 family and has been implicated in the pathogenesis of a variety of autoimmune diseases. Therefore its structural and functional properties are of great medical interest. During our research on a recombinant human IL-17A (rhIL-17A) variant, four isoforms were obtained when it was refolded. While isoforms 1 and 2 represented non-covalent dimers, isoforms 3 and 4 were determined to be covalent dimers. All four isoforms were structurally similar by Circular Dichroism and fluorescence spectroscopy studies, but differential scanning calorimetry demonstrated thermal stability in the order of isoform 1 = isoform 2 < isoform 4 < isoform 3. In addition, compared to covalent dimers (isoform 3 and 4), the non-covalent dimers (isoforms 1 and 2) are slightly less active in a receptor-binding assay but at least 5-fold less active in a cell-based assay.     

Dependence of human somatotropin activity on interchain disulfide bridges

The importance of the disulfide bridges for human somatotropin activity is investigated. The activity of somatotropin is tested by the tibia, radioimmuno-, and radioligand assays. The cleavage of disulfide bridges by sulfitolysis, reduction with dithiothreitol, or oxidation with performic acid does not completely abolish hormone activity. There is only one exception: in the radioligand assay, oxidized somatotropin is not able to displace native somatotropin from rat liver membranes. The diminution of hormone activity is independent of the charges of the groups introduced to the cysteine residues. The radioimmuno- and radioligand assays are more sensitive to conformational alterations in the somatotropin molecule than the biological test system.     

Membrane immunoglobulins are stabilized by interchain disulfide bonds occurring within the extracellular membrane-proximal domain

Membrane-bound immunoglobulins have, in addition to the transmembrane and cytoplasmic portions, an extracellular membrane-proximal domain (EMPD), absent in the secretory forms. EMPDs of immunoglobulin isotypes alpha, gamma, and epsilon contain cysteines whose role has so far not been elucidated. Using a genetic strategy, we investigated the ability of these cysteines to form disulfide bridges. Shortened versions of human membrane immunoglobulins, depleted of cysteines known to form intermolecular disulfide bonds, were constructed and expressed on the surface of a B-cell line. The resulting membrane proteins contain a single chain fragment of variable regions (scFv) linked to the dimerizing domain from the immunoglobulin heavy chains (CH3 for alpha and gamma or CH4 for epsilon isotypes), followed by the corresponding EMPD and the transmembrane and cytoplasmic domains. The two functional membrane versions of the epsilon chain, containing the short and long EMPD, were analyzed. Our results show that the single cysteine within alpha1L and gamma1 EMPD and the short version of epsilon EMPD form an interchain disulfide bond. Conversely, the cysteine resident in the epsilon transmembrane domain remains unreacted. epsilon-long EMPD contains four cysteines; two are involved in interchain bonds while the remaining two are likely forming an intrachain bridge. Expression of a full-length membrane epsilon heavy chain mutant, in which Cys(121) and Cys(209) within domain CH2 (involved in interchain bridges) were mutated to alanines, confirmed that, within the complete IgE, EMPD cysteines form interchain disulfide bonds. In conclusion, we unveil evidence for additional covalent stabilization of membrane-bound immunoglobulins.     

Formation of intermolecular disulfide bonds on nascent immunoglobulin polypeptides.

The initial step of intermolecular covalent assembly of immunoglobulins molecules involves formation of heavy chain-light chain or heavy chain-heavy chain disulfide bonds. Using QAE-Sephadex chromatography to isolate microsomal nascent polypeptides, we have shown that this initial step of intermolecular covalent assembly occurs, to a substantial extent, on nascent heavy chains, as well as on completed heavy chains as previously demonstrated by others. In MPC 11 mouse myeloma cells, completed light chains are assembled covalently to nascent heavy chains, whereas in MOPC 21 mouse myeloma cells, completed heavy chains are assembled covalently to nascent heavy chains. These results are consisted with the heavy-light half-molecule being the major initial intermediate in the assembly of MPC 11 IgG2b and heavy-heavy dimer being the major initial intermediate formed in assembly of MOPC 21 IgG1. The nascent MPC 11 heavy chain must be at least 38,000 daltons in size before assembly with the light chain occurs, even though the heavy chain cysteine involved in this disulfide bond is 131 residues (approximately 15,000 daltons) from the NH2 terminus. In addition, pulse-chase labeling studies of MPC 11 cells have shown that the assembly of completed light chains with the nascent heavy chain must occur within a few minutes of the synthesis of the light chain even though a large excess of unassembled MPC 11 light chains remain inside the cell for an average time of 2 h before being secreted.     

Thioether-bonded constructs of Fab'gamma and Fc gamma modules utilizing differential reduction of interchain disulfide bonds

We describe a two-stage preparation of chemically engineered Ab constructs, employing as modules Fab'gamma from mAb or rAb, and Fc from human normal IgG1. A multivalent, optionally multispecific F(ab')(n) core is formed in stage one, and one or more Fc modules added in stage two. Examples include bispecific Fab(2)Fc(2) (for simplicity, primes and Greek letters are omitted from names of final constructs) and trivalent Fab(3)Fc(2), which are designed to kill neoplastic cells. An essential element in the construction is the availability of the Fab' in two reduced forms, Fab'(-sulfhydryl (SH))(5) and Fab'-SH. The first is obtained by full reduction of the interchain disulfide bonds (SS) in the F(ab')(2) fragment of IgG. Fab'-SH is obtained by disulfide-interchange reactions on Fab'(-SH)(5), whereby the gamma-light SS is reconstituted, an unusual intrachain SS forms in the gamma-chain hinge, and one hinge SH remains. F(ab')(2) and F(ab')(3) cores are built using partially reduced modules, being given intermodular thioether links that resist reduction. These cores are then fully reduced, making available SH groups for addition of the Fcgamma modules. In the final constructs, all intermodular links embody tandem thioether bonds arising at hinge-region cysteines. Cytotoxic activities of representative constructs, and some enhancements deriving from multiple modules, are assessed. In guinea pigs, catabolism of Fab(2)Fc(2) yielded a t(1/2) similar to that of human IgG1, although the serum Fab(2)Fc(2) revealed some proteolytic breakdown not shown by the IgG1. Immunotherapy of a guinea-pig leukemia confirmed the ability of these constructs to kill target cells in vivo.     

The reactivity of the disulfide bonds of human serum haemopexin

The reactivity of the disulfide bonds of the specific haeme-binding plasma protein-human haemopexin has been studied with 2-mercaptoethanol. A molecule of haemopexin has six intrachain disulfide bridges (Takahashi et al., 1985) or which four are reactive while the remaining two can be reduced in the presence of greater than or equal to 4M urea. Disruption of the four reactive disulfide bonds in apohaemopexin abolishes the haeme binding ability. In equimolar haeme-haemopexin complex only one disulfide is reactive which suggests a large change in the tertiary structure of this protein on haeme binding.     

Enzyme reduction of disulfide bonds by thioredoxin. The reactivity of disulfide bonds in human choriogonadotropin and its subunits.

The NADPH-dependent enzymic reduction of disulfide bonds in human choriogonadotropin and its two subunits, alpha and beta, was examined with thioredoxin and thioredoxin reductase from Escherichia coli. With 12 muM thioredoxin and 0.1 muM thioredoxin reductase at pH 7 all disulfide bonds in the alpha subunit could be reduced in 15 min. The reduction of disulfide bonds was recorded by a simple spectrophotometric assay at 340 nm, which allowed quantitation of the reduction rate and the number of disulfide bonds reduced. Partial reduction of the alpha subunit with thioredoxin followed by S-carboxymethylation with iodol[2-3H]acetic acid and analysis of tryptic peptides indicated that all S-S bonds in the alpha subunit were surface oriented and equally reactive. The usefulness of thioredoxin reduction of disulfide bonds as a chemical probe of protein structure was shown by the much slower reaction of disulfide bonds in the intact hormone as compared to its two biologically inactive subunits.