Stabilization of the cold shock protein CspB from Bacillus subtilis by evolutionary optimization of Coulombic interactions

The bacterial cold shock proteins (Csp) are used by both experimentalists and theoreticians as model systems for analyzing the Coulombic contributions to protein stability. We employ Proside, a method of directed evolution, to identify stabilized variants of Bs-CspB from Bacillus subtilis. Proside links the increased protease resistance of stabilized protein variants to the infectivity of a filamentous phage. Here, three cspB libraries were used for in vitro selections to explore the stabilizing potential of charged amino acids in Bs-CspB. In the first library codons for nine selected surface residues were partially randomized, in the second one random mutations were introduced non-specifically by error-prone PCR, and in the third one the spontaneous mutation rate of the phage in Escherichia coli was used. Stabilizing mutations were found at the surface positions 1, 3, 46, 48, 65, and 66. The contributions of these mutations to stability were characterized by analyzing them individually and in combination. The best combination (M1R, E3K, K65I, and E66L) increased the midpoint of thermal unfolding of Bs-CspB from 53.8 to 85.0 degrees C. The effects of most mutations are strongly context dependent. A good example is provided by the E3R mutation. It is strongly stabilizing (DeltaDeltaGD=11.1kJ mol(-1)) in the wild-type protein, but destabilizing (DeltaDeltaGD=-4.0kJ mol(-1)) in the A46K/S48R/E66L variant. The stabilizations by charge mutations did not correlate well with the corresponding changes in the protein net charge, and they could not be ascribed to the formation of ion pairs. Previous theoretical analyses did not identify the stabilization caused by the mutations at positions 1, 46, and 48. Also, electrostatics calculations based on protein net charge or charge asymmetry did not predict well the stability changes that occur when charged residues in Bs-CspB are mutated. It remains a challenge to model the Coulombic interactions of charged residues in a protein and to determine their contributions to the Gibbs free energy of protein folding.     

Origins of the high stability of an in vitro-selected cold-shock protein

In previous work, we had identified stabilized forms of the cold-shock protein Bs-CspB from Bacillus subtilis in a combinatorial library by an in vitro selection procedure. In this library, the sequence positions 2, 3, 46, 64, 66, and 67 had been randomized, because Bs-CspB differs from the naturally thermostable homolog Bc-Csp from Bacillus caldolyticus, among others, at these six positions. For the most stable selected variant, the midpoint of thermal unfolding (tM) increased by 28.2 deg. C and the Gibbs free energy of unfolding (deltaG(D)) by 19 kJ/mol. Here, we analyzed by site-directed mutagenesis how the selected residues contribute individually to this strong stabilization. Val3 and Val66, which replace Glu3 and Glu66 of wild-type Bs-CspB, each contribute about 7 kJ/mol to stability, the Thr64Arg substitution contributes 4.5 kJ/mol, and 3.2 kJ/mol originate from the Ala46Leu replacement. Gly67 at the carboxy terminus is unimportant for stability, the Arg selected at position 2 is overall slightly destabilizing but improves the coulombic interactions. The best variant differs from Bc-Csp at all six positions; nevertheless, natural and in vitro selection followed similar principles. In both cases, negatively charged residues at the adjacent positions 3 and 66 are avoided, and a positively charged residue is introduced into this area of the protein surface. Its exact location is unimportant. It can be at position 3, as in the thermophilic Bc-Csp, or at positions 2 or 64, as in the most stable selected variant. These positively charged residues contribute to stability not by engaging in pairwise coulombic interactions with a specific carboxyl group, but by generally improving the charge distribution in this particular region of the protein surface. These coulombic effects contribute significantly to the thermostability of the cold-shock proteins. They are only weakly interdependent and best explained by the presence of a flexible ion network at the protein surface. Our results emphasize that surface positions are very good candidates for optimizing protein stability.     

Increased folding stability of TEM-1 beta-lactamase by in vitro selection

In vitro selections of stabilized proteins lead to more robust enzymes and, at the same time, yield novel insights into the principles of protein stability. We employed Proside, a method of in vitro selection, to find stabilized variants of TEM-1 β-lactamase from Escherichia coli. Proside links the increased protease resistance of stabilized proteins to the infectivity of a filamentous phage. Several libraries of TEM-1 β-lactamase variants were generated by error-prone PCR, and variants with increased protease resistance were obtained by raising temperature or guanidinium chloride concentration during proteolytic selections. Despite the small size of phage libraries, several strongly stabilizing mutations could be obtained, and a manual combination of the best shifted the profiles for thermal unfolding and temperature-dependent inactivation of β-lactamase by almost 20 °C to a higher temperature. The wild-type protein unfolds in two stages: from the native state via an intermediate of the molten-globule type to the unfolded form. In the course of the selections, the native protein was stabilized by 27 kJ mol^− 1 relative to the intermediate and the cooperativity of unfolding was strongly increased. Three of our stabilizing replacements (M182T, A224V, and R275L) had been identified independently in naturally occurring β-lactamase variants with extended substrate spectrum. In these variants, they acted as global suppressors of destabilizations caused by the mutations in the active site. The comparison between the crystal structure of our best variant and the crystal structure of the wild-type protein indicates that most of the selected mutations optimize helices and their packing. The stabilization by the E147G substitution is remarkable. It removes steric strain that originates from an overly tight packing of two helices in the wild-type protein. Such unfavorable van der Waals repulsions are not easily identified in crystal structures or by computational approaches, but they strongly reduce the conformational stability of a protein.     

In vitro evolution of a hyperstable Gbeta1 variant

An in-vitro selection strategy was used to obtain strongly stabilized variants of the beta1 domain of protein G (Gbeta1). In a two-step approach, first candidate positions with a high potential for stabilization were identified in Gbeta1 libraries that were created by error-prone PCR, and then, after randomization of these positions by saturation mutagenesis, strongly stabilized variants were selected. For both steps the in-vitro selection method Proside was employed. Proside links the stability of a protein with the infectivity of a filamentous phage. Ultimately, residues from the two best selected variants were combined in a single Gbeta1 molecule. This variant with the four mutations E15V, T16L, T18I, and N37L showed an increase of 35.1 degrees C in the transition midpoint and of 28.5 kJ mol(-1) (at 70 degrees C) in the Gibbs free energy of stabilization. It was considerably more stable than the best variant from a previous Proside selection, in which positions were randomized that had originally been identified by computational design. Only a single substitution (T18I) was found in both selections. The best variants from the present selection showed a higher cooperativity of thermal unfolding, as indicated by an increase in the enthalpy of unfolding by about 60 kJ mol(-1). This increase is apparently correlated with the presence of Leu residues that were selected at the positions 16 and 37.     

Electrostatic interactions in leucine zippers: thermodynamic analysis of the contributions of Glu and His residues and the effect of mutating salt bridges

Electrostatic interactions play a complex role in stabilizing proteins. Here, we present a rigorous thermodynamic analysis of the contribution of individual Glu and His residues to the relative pH-dependent stability of the designed disulfide-linked leucine zipper AB(SS). The contribution of an ionized side-chain to the pH-dependent stability is related to the shift of the pK(a) induced by folding of the coiled coil structure. pK(a)(F) values of ten Glu and two His side-chains in folded AB(SS) and the corresponding pK(a)(U) values in unfolded peptides with partial sequences of AB(SS) were determined by 1H NMR spectroscopy: of four Glu residues not involved in ion pairing, two are destabilizing (-5.6 kJ mol(-1)) and two are interacting with the positive alpha-helix dipoles and are thus stabilizing (+3.8 kJ mol(-1)) in charged form. The two His residues positioned in the C-terminal moiety of AB(SS) interact with the negative alpha-helix dipoles resulting in net stabilization of the coiled coil conformation carrying charged His (-2.6 kJ mol(-1)). Of the six Glu residues involved in inter-helical salt bridges, three are destabilizing and three are stabilizing in charged form, the net contribution of salt-bridged Glu side-chains being destabilizing (-1.1 kJ mol(-1)). The sum of the individual contributions of protonated Glu and His to the higher stability of AB(SS) at acidic pH (-5.4 kJ mol(-1)) agrees with the difference in stability determined by thermal unfolding at pH 8 and pH 2 (-5.3 kJ mol(-1)). To confirm salt bridge formation, the positive charge of the basic partner residue of one stabilizing and one destabilizing Glu was removed by isosteric mutations (Lys-->norleucine, Arg-->norvaline). Both mutations destabilize the coiled coil conformation at neutral pH and increase the pK(a) of the formerly ion-paired Glu side-chain, verifying the formation of a salt bridge even in the case where a charged side-chain is destabilizing. Because removing charges by a double mutation cycle mainly discloses the immediate charge-charge effect, mutational analysis tends to overestimate the overall energetic contribution of salt bridges to protein stability.     

Key role of coulombic interactions for the folding transition state of the cold shock protein

The cold shock protein CspB shows a five-stranded beta-sheet structure, and it folds rapidly via a native-like transition state. A previous Phi value analysis showed that most of the residues with Phi values close to one reside in strand beta1, and two of them, Lys5 and Lys7 are partially exposed charged residues. To elucidate how coulombic interactions of these two residues contribute to the energetic organisation of the folding transition state we performed comparative folding experiments in the presence of an ionic denaturant (guanidinium chloride) and a non-ionic denaturant (urea) and a double-mutant analysis. Lys5 contributes 6.6 kJ mol(-1) to the stability of the transition state, and half of it originates from screenable coulombic interactions. Lys7 contributes 5.3 kJ mol(-1), and 3.4 kJ mol(-1) of it are screened by salt. In the folded protein Lys7 interacts with Asp25, and the screenable coulombic interaction between these two residues is fully formed in the transition state. This suggests that long-range coulombic interactions such as those originating from Lys5 and Lys7 of CspB can be important for organizing and stabilizing native-like structure early in protein folding.     

Electrostatic stabilization of a thermophilic cold shock protein.

The cold shock protein Bc-Csp from the thermophile Bacillus caldolyticus differs from its mesophilic homolog Bs-CspB from Bacillus subtilis by 15.8 kJ mol(-1) in the Gibbs free energy of denaturation (DeltaG(D)). The two proteins vary in sequence at 12 positions but only two of them, Arg3 and Leu66 of Bc-Csp, which replace Glu3 and Glu66 of Bs-CspB, are responsible for the additional stability of Bc-Csp. These two positions are near the ends of the protein chain, but close to each other in the three-dimensional structure. The Glu3Arg exchange alone changed the stability by more than 11 kJ mol(-1). Here, we elucidated the molecular origins of the stability difference between the two proteins by a mutational analysis. Electrostatic contributions to stability were characterized by measuring the thermodynamic stabilities of many variants as a function of salt concentration. Double and triple mutant analyses indicate that the stabilization by the Glu3Arg exchange originates from three sources. Improved hydrophobic interactions of the aliphatic moiety of Arg3 contribute about 4 kJ mol(-1). Another 4 kJ mol(-1) is gained from the relief of a pairwise electrostatic repulsion between Glu3 and Glu66, as in the mesophilic protein, and 3 kJ mol(-1) originate from a general electrostatic stabilization by the positive charge of Arg3, which is not caused by a pairwise interaction. Mutations of all potential partners for an ion pair within a radius of 10 A around Arg3 had only marginal effects on stability. The Glu3-->Arg3 charge reversal thus optimizes ionic interactions at the protein surface by both local and global effects. However, it cannot convert the coulombic repulsion with another Glu residue into a corresponding attraction. Avoidance of unfavorable coulombic repulsions is probably a much simpler route to thermostability than the creation of stabilizing surface ion pairs, which can form only at the expense of conformational entropy.     

Changing the determinants of protein stability from covalent to non-covalent interactions by in vitro evolution: a structural and energetic analysis

The three disulfide bonds of the gene-3-protein of the phage fd are essential for the conformational stability of this protein, and it unfolds when they are removed by reduction or mutation. Previously, we used an iterative in vitro selection strategy to generate a stable and functional form of the gene-3-protein without these disulfides. It yielded optimal replacements for the disulfide bonds as well as several stabilizing second-site mutations. The best selected variant showed a higher thermal stability compared with the disulfide-bonded wild-type protein. Here, we investigated the molecular basis of this strong stabilization by solving the crystal structure of this variant and by analyzing the contributions to the conformational stability of the selected mutations individually. They could mostly be explained by improved side-chain packing. The R29W substitution alone increased the midpoint of the thermal unfolding transition by 14 deg and the conformational stability by about 25 kJ mol^− 1. This key mutation (i) removed a charged side chain that forms a buried salt bridge in the disulfide-containing wild-type protein, (ii) optimized the local packing with the residues that replace the C46-C53 disulfide and (iii) improved the domain interactions. Apparently, certain residues in proteins indeed play key roles for stability.     

In-vitro selection of highly stabilized protein variants with optimized surface

Thermostable proteins are of prime importance in protein science, but it has remained difficult to develop general strategies for stabilizing a protein. Site-directed mutagenesis based on comparisons with thermophilic homologs is rarely successful because the sequence differences are too numerous and dominated by neutral mutations. Here we used a method of directed evolution to increase the stability of a mesophilic protein, the cold shock protein Bs-CspB from Bacillus subtilis. It differs from its thermophilic counterpart Bc-Csp from Bacillus caldolyticus at 12 surface-exposed positions. To elucidate the stabilizing potential of exposed amino acid residues, six of these variant positions were randomized by saturation mutagenesis, the corresponding library of sequences was inserted into the gene-3-protein of the filamentous phage fd, and stabilized variants were selected by the Proside technique. Proside links the increased protease resistance of stabilized protein variants with the infectivity of the phage. Many strongly stabilized variants of Bs-CspB were identified in two selections, one in the presence of a denaturant and the other at elevated temperature. Several of them are significantly more stable than the naturally thermostable homolog Bc-Csp, and the best variant reaches Tm-Csp (the homolog from the hyperthermophile Thermotoga maritima) in stability. Remarkably, this variant differs from Tm-Csp at five and from Bc-Csp at all six randomized positions. This indicates that proteins can be strongly stabilized by many different sets of surface mutations, and Proside selects them efficiently from large libraries. The course of the selection could be directed by the conditions. In an ionic denaturant non-polar surface interactions were optimized, whereas at elevated temperature variants with improved electrostatics were selected, pointing to two different strategies for stabilization at protein surfaces.     

Optimization of the gbeta1 domain by computational design and by in vitro evolution: structural and energetic basis of stabilization

Computational design and in vitro evolution are major strategies for stabilizing proteins. For the four critical positions 16, 18, 25, and 29 of the B domain of the streptococcal protein G (Gbeta1), they identified the same optimal residues at positions 16 and 25, but not at 18 and 29. Here we analyzed the energetic contributions of the residues from these two approaches by single and double mutant analyses and determined crystal structures for a variant from the calculation (I16/L18/E25/K29) and from the selection (I16/I18/E25/F29). The structural analysis explains the observed differences in stabilization. Residues 16, 18, and 29 line an invagination, which results from a packing defect between the helix and the beta-sheet of Gbeta1. In all stabilized variants, residues with larger side-chains occur at these positions and packing is improved. In the selected variant, packing is better optimized than in the computed variant. Such differences in side-chain packing strongly affect stability but are difficult to evaluate by computation.     

Characterization and suppression of dysfunctional human alpha1-antitrypsin variants

Human alpha1-antitrypsin-deficient variants may aggregate in the liver, with subsequent deficiency in the plasma, which can lead to emphysema. The structural and functional characteristics of 10 dysfunctional alpha1-antitrypsin variants (R39C, S53F, V55P, I92N, G115S, N158K, E264V, A336T, P369S, and P369L) were analyzed in detail. Most of them were unstable, as compared to the wild-type molecule, and many of the variants folded into an intermediate form. When five thermostable mutations (T68A, A70G, M374I, S381A, and K387R) were introduced into dysfunctional alpha1-antitrypsin variants, the stabilities and inhibitory activities of most of the variants were restored to levels comparable to those of the wild-type molecule. However, the extremely unstable S53F variant was not stabilized sufficiently by these mutations so as to exhibit function. N158K variant, which carries a mutation in the region critical for the reactive site loop insertion into beta-sheet A, exhibited a reduced level of inhibitory activity, despite conformational stabilization. These results show that aberrant folding caused by conformational destabilization due to mutations can be compensated for by increasing the overall stability of the alpha1-antitrypsin molecule, with exception of a mutation in the highly localized region critical for functional execution.     

Effects of engineered salt bridges on the stability of subtilisin BPN'

Variants designed using PROTEUS have been produced in an attempt to engineer stabilizing salt bridges into subtilisin BPN'. All the mutants constructed by site-directed mutagenesis were secreted by Bacillus subtilis, except L75K. Q19E, expressed as a single variant and also in a double variant, Q19E/Q271E, appears to form a stabilizing salt bridge based on X-ray crystal structure determination and differential scanning calorimeter measurements. Although the double mutant was found to be less thermodynamically stable than the wild-type, it did exhibit an autolytic stability about two-fold greater under hydrophobic conditions. Four variants, A98K, S89E, V26R and L235R, were found to be nearly identical to wild-type in thermal stability, indicative of stable structures without evidence of salt bridge formation. Variants Q271E, V51K and T164R led to structures that resulted in varying degrees of thermodynamic and autolytic instability. A computer-modeling analysis of the PROTEUS predictions reveals that the low percentage of salt bridge formation is probably due to an overly simplistic electrostatic model, which does not account for the geometry of the pairwise interactions.     

Structural and functional properties of isocitrate dehydrogenase from the psychrophilic bacterium Desulfotalea psychrophila reveal a cold-active enzyme with an unusual high thermal stability

Isocitrate dehydrogenase (IDH) has been studied extensively due to its central role in the Krebs cycle, catalyzing the oxidative NAD(P)(+)-dependent decarboxylation of isocitrate to alpha-ketoglutarate and CO(2). Here, we present the first crystal structure of IDH from a psychrophilic bacterium, Desulfotalea psychrophila (DpIDH). The structural information is combined with a detailed biochemical characterization and a comparative study with IDHs from the mesophilic bacterium Desulfitobacterium hafniense (DhIDH), porcine (PcIDH), human cytosolic (HcIDH) and the hyperthermophilic Thermotoga maritima (TmIDH). DpIDH was found to have a higher melting temperature (T(m)=66.9 degrees C) than its mesophilic homologues and a suboptimal catalytic efficiency at low temperatures. The thermodynamic activation parameters indicated a disordered active site, as seen also for the drastic increase in K(m) for isocitrate at elevated temperatures. A methionine cluster situated at the dimeric interface between the two active sites and a cluster of destabilizing charged amino acids in a region close to the active site might explain the poor isocitrate affinity. On the other hand, DpIDH was optimized for interacting with NADP(+) and the crystal structure revealed unique interactions with the cofactor. The highly acidic surface, destabilizing charged residues, fewer ion pairs and reduced size of ionic networks in DpIDH suggest a flexible global structure. However, strategic placement of ionic interactions stabilizing the N and C termini, and additional ionic interactions in the clasp domain as well as two enlarged aromatic clusters might counteract the destabilizing interactions and promote the increased thermal stability. The structure analysis of DpIDH illustrates how psychrophilic enzymes can adjust their flexibility in dynamic regions during their catalytic cycle without compromising the global stability of the protein.     

Contribution of surface salt bridges to protein stability: guidelines for protein engineering

The small globular protein, ubiquitin, contains a pair of oppositely charged residues, K11 and E34, that according to the three-dimensional structure are located on the surface of this protein with a spatial orientation characteristic of a salt bridge. We investigated the strength of this salt bridge and its contribution to the global stability of the ubiquitin molecule. Using the "double mutant cycle" analysis, the strength of the pairwise interactions between K11 and E34 was estimated to be favorable by 3.6kJ/mol. Further, the salt bridge of the reverse orientation, i.e. E11/K34, can be formed and is found to have a strength (3.8kJ/mol) similar to that of the K11/E34 pair. However, the global stability of the K11/E34 variant of ubiquitin is 2.2kJ/mol higher than that of the E11/K34 variant. The difference in the contribution of the opposing salt bridge orientations to the overall stability of the ubiquitin molecule is attributed to the difference in the charge-charge interactions between residues forming the salt bridge and the rest of the ionizable groups in this protein. On the basis of these results, we concluded that surface salt bridges are stabilizing, but their contribution to the overall protein stability is strongly context-dependent, with charge-charge interactions being the largest determinant. Analysis of 16 salt bridges from six different proteins, for which detailed experimental data on energetics have been reported, support the conclusions made from the analysis of the salt bridge in ubiquitin. Implications of these findings for engineering proteins with enhanced thermostability are discussed.     

Thermal stability and atomic-resolution crystal structure of the Bacillus caldolyticus cold shock protein

The bacterial cold shock proteins are small compact beta-barrel proteins without disulfide bonds, cis-proline residues or tightly bound cofactors. Bc-Csp, the cold shock protein from the thermophile Bacillus caldolyticus shows a twofold increase in the free energy of stabilization relative to its homolog Bs-CspB from the mesophile Bacillus subtilis, although the two proteins differ by only 12 out of 67 amino acid residues. This pair of cold shock proteins thus represents a good system to study the atomic determinants of protein thermostability. Bs-CspB and Bc-Csp both unfold reversibly in cooperative transitions with T(M) values of 49.0 degrees C and 77.3 degrees C, respectively, at pH 7.0. Addition of 0.5 M salt stabilizes Bs-CspB but destabilizes Bc-Csp. To understand these differences at the structural level, the crystal structure of Bc-Csp was determined at 1.17 A resolution and refined to R=12.5% (R(free)=17.9%). The molecular structures of Bc-Csp and Bs-CspB are virtually identical in the central beta-sheet and in the binding region for nucleic acids. Significant differences are found in the distribution of surface charges including a sodium ion binding site present in Bc-Csp, which was not observed in the crystal structure of the Bs-CspB. Electrostatic interactions are overall favorable for Bc-Csp, but unfavorable for Bs-CspB. They provide the major source for the increased thermostability of Bc-Csp. This can be explained based on the atomic-resolution crystal structure of Bc-Csp. It identifies a number of potentially stabilizing ionic interactions including a cation-binding site and reveals significant changes in the electrostatic surface potential.     

Dimer Formation of a Stabilized Gβ1 Variant: A Structural and Energetic Analysis

In previous work, a strongly stabilized variant of the β1 domain of streptococcal protein G (Gβ1) was obtained by an in vitro selection method. This variant, termed Gβ1-M2, contains the four substitutions E15V, T16L, T18I, and N37L. Here we elucidated the molecular basis of the observed strong stabilizations. The contributions of these four residues were analyzed individually and in various combinations, additional selections with focused Gβ1 gene libraries were performed, and the crystal structure of Gβ1-M2 was determined. All single substitutions (E15V, T16L, T18I, and N37L) stabilize wild-type Gβ1 by contributions of between 1.6 and 6.0 kJ mol^− 1 (at 70 °C). Hydrophobic residues at positions 16 and 37 provide the major contribution to stabilization by enlarging the hydrophobic core of Gβ1. They also increase the tendency to form dimers, as shown by dependence on the concentration of apparent molecular mass in analytical ultracentrifugation, by concentration-dependent stability, and by a strongly increased van't Hoff enthalpy of unfolding. The 0.88-Å crystal structure of Gβ1-M2 and NMR measurements in solution provide the explanation for the observed dimer formation. It involves a head-to-head arrangement of two Gβ1-M2 molecules via six intermolecular hydrogen bonds between the two β strands 2 and 2′ and an adjacent self-complementary hydrophobic surface area, which is created by the T16L and N37L substitutions and a large 120° rotation of the Tyr33 side chain. This removal of hydrophilic groups and the malleability of the created hydrophobic surface provide the basis for the dimer formation of stabilized Gβ1 variants.     

Effects of charged amino-acid mutation on the solution structure of cytochrome b5 and binding between cytochrome b5 and cytochrome c

The solution structure of oxidized bovine microsomal cytochrome b(5) mutant (E48, E56/A, D60/A) has been determined through 1524 meaningful nuclear Overhauser effect constraints together with 190 pseudocontact shift constraints. The final family of 35 conformers has rmsd values with respect to the mean structure of 0.045+/-0.009 nm and 0.088+/-0.011 nm for backbone and heavy atoms, respectively. A characteristic of this mutant is that of having no significant changes in the whole folding and secondary structure compared with the X-ray and solution structures of wild-type cytochrome b(5). The binding of different surface mutants of cytochrome b(5) with cytochrome c shows that electrostatic interactions play an important role in maintaining the stability and specificity of the protein complex formed. The differences in association constants demonstrate the electrostatic contributions of cytochrome b(5) surface negatively charged residues, which were suggested to be involved in complex formation in the Northrup and Salemme models, have cumulative effect on the stability of cyt c-cyt b(5) complex, and the contribution of Glu48 is a little higher than that of Glu44. Moreover, our result suggests that the docking geometry proposed by Northrup, which is involved in the participation of Glu48, Glu56, Asp60, and heme propionate of cytochrome b(5), do occur in the association between cytochrome b(5) and cytochrome c.     

Site-directed mutagenesis of an alkaline phytase: influencing specificity, activity and stability in acidic milieu

Site-directed mutagenesis of a thermostable alkaline phytase from Bacillus sp. MD2 was performed with an aim to increase its specific activity and activity and stability in an acidic environment. The mutation sites are distributed on the catalytic surface of the enzyme (P257R, E180N, E229V and S283R) and in the active site (K77R, K179R and E227S). Selection of the residues was based on the idea that acid active phytases are more positively charged around their catalytic surfaces. Thus, a decrease in the content of negatively charged residues or an increase in the positive charges in the catalytic region of an alkaline phytase was assumed to influence the enzyme activity and stability at low pH. Moreover, widening of the substrate-binding pocket is expected to improve the hydrolysis of substrates that are not efficiently hydrolysed by wild type alkaline phytase. Analysis of the phytase variants revealed that E229V and S283R mutants increased the specific activity by about 19% and 13%, respectively. Mutation of the active site residues K77R and K179R led to severe reduction in the specific activity of the enzyme. Analysis of the phytase mutant-phytate complexes revealed increase in hydrogen bonding between the enzyme and the substrate, which might retard the release of the product, resulting in decreased activity. On the other hand, the double mutant (K77R-K179R) phytase showed higher stability at low pH (pH 2.6-3.0). The E227S variant was optimally active at pH 5.5 (in contrast to the wild type enzyme that had an optimum pH of 6) and it exhibited higher stability in acidic condition. This mutant phytase, displayed over 80% of its initial activity after 3 h incubation at pH 2.6 while the wild type phytase retained only about 40% of its original activity. Moreover, the relative activity of this mutant phytase on calcium phytate, sodium pyrophosphate and p-nitro phenyl phosphate was higher than that of the wild type phytase.     

A disease state mutation unfolds the parkin ubiquitin-like domain

E3 ubiquitin ligases are essential enzymes in the ubiquitination pathway responsible for the recognition of specific E2 conjugating enzymes and for transferring ubiquitin to a substrate targeted for degradation. In autosomal recessive juvenile Parkinson's disease, an early onset form of Parkinson's disease, point mutations in the E3 ligase parkin are one of the most commonly observed traits. Parkin is a multidomain E3 ligase that contains an N-terminal ubiquitin-like domain that interacts with, and effects the ubiquitination of, substrates such as cyclin E, p38 and synphilin. In this work we have examined the folding and structure of the parkin ubiquitin-like domain (Ubld) and of the protein with two causative disease mutations (K48A and R42P). Parallel experiments with the protein ubiquitin were done in order to determine if the same mutations were detrimental to the ubiquitin structure and stability. Despite similar folds between the parkin Ubld and ubiquitin, urea unfolding experiments show that the parkin Ubld is surprisingly approximately 10.6 kJ/mol less stable than ubiquitin. The K48A mutation had little effect on the stability of the parkin Ubld or ubiquitin indicating that this mutation contributes to defective protein-protein interactions. In contrast, the single point mutation R42P in parkin's Ubld caused poor expression and degradation of the protein. To avoid these problems, a GB1-Ubld fusion protein was characterized by NMR spectroscopy to show that the R42P mutation causes the complete unfolding of the parkin Ubld. This observation provides a rationale for the more rapid degradation of parkin carrying the R42P mutation in vivo, and its inability to interact with some substrate proteins. Our work provides the first structural and folding insight into the effects of causative mutations within the ubiquitin-like domain in autosomal recessive juvenile Parkinson's disease.