Construction of plasmid cloning vectors for lactic streptococci which also replicate in Bacillus subtilis and Escherichia coli.

The cryptic Streptococcus cremoris Wg2 plasmid pWV01 (1.5 megadaltons) was genetically marked with the chloramphenicol resistance (Cmr) gene from pC194. The recombinant plasmid (pGK1, 2.4 megadaltons) replicated and expressed Cmr in Bacillus subtilis. From this plasmid an insertion-inactivation vector was constructed by inserting the erythromycin resistance (Emr) gene from pE194 cop-6. This plasmid (pGK12, 2.9 megadaltons) contained a unique BclI site in the Emr gene and unique ClaI and HpaII sites outside both resistance genes. It was stably maintained in B. subtilis at a copy number of approximately 5. pGK12 also transformed Escherichia coli competent cells to Cmr and Emr. The copy number in E. coli was about 60. Moreover, pGK12 transformed protoplasts of Streptococcus lactis. In this host both resistance genes are expressed. pGK12 is stably maintained in S. lactis at a copy number of 3.     

Construction of plasmid vectors for gene cloning in Escherichia coli and Bacillus subtilis

The construction and some properties of new hybrid plasmids which are able to replicate in both Escherichia coli and Bacillus subtilis are presented. A 5.5 Md hybrid plasmid pJP9 was constructed from pBR322 (Tc, Ap) and pUB110 (Nm) plasmids. pIM1 (7.0 Md) and pIM3 (7.7 Md) plasmids are its different erythromycin resistant derivatives. Tetracycline, ampicillin, neomycin and possibly erythromycin resistance genes are expressed in E. coli while neomycin and erythromycin resistance genes are expressed in B. subtilis. Insertional inactivation of only one gene is possible using the pJP9 plasmid as a vector in B. subtilis. However, insertional inactivation of at least two different genes can be achieved and monitored in E. coli and B. subtilis transformants in cloning experiments with PIM1 and pIM3 plasmids. Insertional inactivation of antibiotic resistance genes present in pJP9 plasmid was achieved by cloning of Streptococcus sanguis DNA fragments generated by appropriate restriction endonucleases. The pJP9 plasmid and its derivatives were found to be stable in both hosts cells.     

Construction of hybrid plasmid vectors for cloning inEscherichia coli,Bacillus subtilis,and the cyanobacteriumAnacystis nidulans

Two hybrid plasmids capable of acting as shuttle cloning vectors inAnacystis nidulans andBacillus subtilis were constructed by in vitro ligation. One construct, pMG202, consists of theB. subtilis vector pNN101 and the endogenous cyanobacterial plasmid pUH24. This 14.6 kb plasmid confers chloramphenicol resistance in both hosts and tetracycline resistance inB. subtilis. A second vector, pMG101, consists of pNN101 linked to theA. nidulans-Escherichia coli chimeric plasmid pCB4 and is 12.9 kb in size. The pCB4 portion of the vector enables pMG101 to replicate in the third host,E. coli, and confers ampicillin resistance in this bacterium as well as inA. nidulans. Both plasmids possess identical uniqueStu I sites which permit insertional inactivation of the chloramphenicol resistance gene; and, in addition, identical uniqueXho I sites are present on both vectors. Each vector also has a third unique site:Sma I on pMG101 andXba I on pMG202.     

Construction of linear plasmid vectors for cloning in Escherichia coli cells]

Prophage of the temperate coliphage N15 is a linear plasmid with covalently closed ends. The central part of plasmid N15 genome responsible for vegetative phage growth was replaced by DNA fragments containing genes for selective markers which have unique restriction sites. As a result a family of linear plasmid vectors was constructed. Their size is about 20 kb and their capacity is comparable with that of cosmid vectors.     

Versatile low-copy-number plasmid vectors for cloning in Escherichia coli

Small low-copy-number plasmid vectors were constructed by in vitro and in vivo recombinant DNA techniques. pLG338 and pLG339 are derived from pSC105, have a copy number of six to eight per chromosome, and carry genes conferring resistance to tetracycline and kanamycin. pLG338 (7.3 kb) has unique restriction endonuclease sites for BamHI, SalI, HincII, SmaI, XhoI, EcoRI and KpnI, the first five lying within a drug resistance gene. pLG339 (6.2 kb) lacks the KpnI site, but has unique SphI and PvuII sites. These versatile vectors should be useful for cloning many genes coding for membrane and regulatory proteins which cannot be cloned into high-copy-number plasmids.     

Molecular cloning with bifunctional plasmid vectors in Bacillus subtilis. II. Transfer of sequences propagated in Escherichia coli to B. subtilis

Recombinant plasmid DNA cloned in E. coli via the bifunctional vector pDH5060 suffered deletions when returned to B. subtilis. However, DNA preparations of identical chimeras containing homologous or heterologous sequences stably transformed B. subtilis at high efficiency when isolated from B. subtilis. The vector pDH5060, however, was not affected and could be stably shuttled between E. coli and B. subtilis at high frequency. These problems affected the transfer of clone pools and individual chimeras, irrespective of the restriction or recombination phenotype of B. subtilis recipients. Deleted chimeras lost at least one end of cloned inserts, and in most cases, flanking plasmid sequences. Single plasmid forms (intact or deleted) were isolated from several hundred individual Cmr-transformants this suggests that events leading to deletion of chimeric plasmid DNA occur during transformation by restriction of unmodified insert sequences propagated in the intermediate host, E. coli. This conclusion is discussed with regard to the mechanism of plasmid transformation in B. subtilis.     

New shuttle vectors for Bacillus subtilis and Escherichia coli which allow rapid detection of inserted fragments

Two new shuttle vectors have been constructed by fusing the Escherichia coli plasmid pUC9 with the Staphylococcus aureus plasmids pU110 and pC194. The resulting hybrids replicate in both E. coli and Bacillus subtilis and contain seven restriction sites within a part of the lacZ gene. Insertion of foreign DNA into those sites can be easily detected in E. coli and hybrid plasmids can subsequently be transformed into B. subtilis.     

Molecular cloning with bifunctional plasmid vectors in Bacillus subtilis: isolation of a spontaneous mutant of Bacillus subtilis with enhanced transformability for Escherichia coli-propagated chimeric plasmid DNA

Hybrid plasmid DNA cloned in Escherichia coli undergoes deletions when returned to competent Bacillus subtilis, even in defined restriction and modification mutants of strain 168. We have isolated a mutant of B. subtilis MI112 which is stably transformed at high frequency by chimeric plasmid DNA propagated in E. coli.     

New plasmid expression vectors for Bacillus subtilis

The construction of new cloning vectors for Bacillus subtilis is described. They are derived from the in vitro joining of parts of pE194 and pUB110 DNAs. Their common feature is to present a cloning site immediately after the promoter and ribosome binding site of the erythromycin resistance gene, allowing the insertion and expression of either sticky or blunt ended DNA fragments coding for any heterologous gene. The cloning and expression of Escherichia coli beta-lactamase and EcoRI methylase are given as examples. The enzymes are efficiently synthesized by B. subtilis cells.     

High copy number plasmid vectors for use in lactic streptococci

Abstract A 3.8 kb DNA fragment from plasmid pBD64 which encoded chloramphenicol and kanamycin resistance genes, but had no replication region, was used as a replicator probe to select for the replication region of the cryptic lactic streptococcal plasmid pSH71 using Bacillus subtilis as host. Three of the resultant recombinant plasmids, pCK1, pCK17 and pCK21 are described. They are vectors in Streptococcus lactis and can be used to clone Bgl II-compatible fragments into their kanamycin resistance gene. All the plasmids have single sites for restriction endonucleases Ava I, Bam HI, Eco RI, Pvu II and Xba I, while plasmids pCK17 and pCK21 have single sites for Cla I.     

Construction and use of signal sequence selection vectors in Escherichia coli and Bacillus subtilis.

To study the diversity and efficiency of signal peptides for secreted proteins in gram-positive bacteria, two plasmid vectors were constructed which were used to probe for export signal-coding regions in Bacillus subtilis. The vectors contained genes coding for extracellular proteins (the alpha-amylase gene from Bacillus licheniformis and the beta-lactamase gene from Escherichia coli) which lacked a functional signal sequence. By shotgun cloning of restriction fragments from B. subtilis chromosomal DNA, a great variety of different export-coding regions were selected. These regions were functional both in B. subtilis and in E. coli. In a number of cases where protein export had been restored, intracellular precursor proteins of increased size could be detected, which upon translocation across the cellular membrane were processed to mature products. The high frequency with which export signal-coding regions were obtained suggests that, in addition to natural signal sequences, many randomly cloned sequences can function as export signal.     

Efficient cloning in Bacillus megaterium: comparison to Bacillus subtilis and Escherichia coli cloning hosts

Quantitative cloning efficiencies for B. megaterium, B. subtilis , and E. coli were compared. Transformation of B. megaterium is less efficient than transformation of B. subtilis or E. coli . The frequency of recombinant clones was equal in E. coli and B. megaterium ; both somewhat higher than in B. subtilis . Equivalent average insert sizes were found in B. megaterium and E. coli clones, but significantly smaller inserts were obtained in B. subtilis clones. Clones obtained and propagated in B. megaterium were structurally stable when grown under plasmid selection.     

Construction of new shuttle plasmid vectors for Escherichia coli-Bacteroides transgeneric cloning

Abstract An Escherichia coli-Bacteroides shuttle vehicle (pKBF367-1) was constructed by combining the pBR322 derivative pKC7 (5.9 kb) with [1] a 4.6 kb cryptic plasmid from Bacteroides fragilis ; and [2] the 4.2 kb Eco RI-B fragment of the B. fragilis plasmid pBFTM10. This latter component allowed selection of clindamycin-resistant transconjugants upon helper plasmid-mediated transfer to a recipient strain of Bacteroides distasonis . To improve the potential of pKBF367-1 (14.7 kb) as cloning vector, successive deletions generated derivatives of 12.8, 10.5 and 9.3 kb, which were still able to replicate in B. distasonis 419. These bifunctional vectors were successfully employed to introduce transposon Tn 501 (Hg^r) into B. distasonis 419, but expression of mercury resistance was not observed. This plasmid vehicles series may be useful for cloning Bacteroides genes in E. coli and studying their expression in a heterologous Bacteroides strain.     

Molecular cloning of a Bacillus subtilis xylanase gene in Escherichia coli

A gene coding for xylanase synthesis in Bacillus subtilis was isolated by direct shotgun cloning using Escherichia coli as a host. Following partial digestion of B. subtilis chromosomal DNA with PstI or EcoRI restriction enzymes, fragments ranging from 3 to 7 kb were introduced into the PstI or EcoRI sites of pBR325. Transformed colonies having lost either the ampicillin or chloramphenicol resistance markers were screened directly on 1% xylan plates. Out of 8000 transformants, ten xylanase-positive clones were identified by the clearing zone around lysozyme-treated colonies. Further characterization of one of the clones showed that the xylanase gene was present in a 3.9-kb insert within the PstI site of the plasmid pBR325. Retransformation of E. coli strain with the xylanase-positive hybrid plasmid pRH271 showed 100% transformation to xylanase production. The intracellular xylanase produced by the transformed E. coli was purified by ion exchange and gel permeation chromatography. The electrophoretic mobility of the purified xylanase indicated an Mr of 22 000.     

A new cloning system for Bacillus subtilis comprising elements of phage, plasmid and transposon vectors

A new cloning system for Bacillus subtilis was devised which makes use of a combination of Tn917-containing phage SP beta derivatives and Tn917-containing Escherichia coli-B. subtilis shuttle plasmids. This system allows the initial cloning of genes in single copy, via 'prophage transformation', with a selection for complementation of mutational defects in B. subtilis hosts and permits subsequent transfer of the cloned material by homologous recombination to low-copy and high-copy vectors that replicate in both B. subtilis and E. coli. Because cloned sequences are adjacent to pB322-derived DNA in the recombinant phages, inserts can also be 'rescued' directly from the phage DNA after digestion with appropriate restriction enzymes, circularization of the fragments by ligation and transformation of an E. coli recipient. Two genomic libraries of B. subtilis chromosomal Sau3A-generated partial-digest fragments in the size ranges of 5-8 kb and 8-10 kb were constructed and screened for the complementation of mutations aroI906, cysA14, dal-1, glyB133, metC3, purA16, purB33, thrA5, trpC2 and recE4. In all cases, specialized transducing phages carrying inserts that complemented the selected markers were recovered. Inserts complementing the dal-1 and trpC2 mutations could be transferred from recombinant phages to Tn917-containing plasmids by homologous recombination without in vitro subcloning. Another insert complementing the purB33 mutation was rescued directly into E. coli from a recombinant phage DNA.     

Creating new genes by plasmid recombination in Escherichia coli and Bacillus subtilis

Gene shuffling is a way of creating proteins with interesting new characteristics, starting from diverged sequences. We tested an alternative to gene shuffling based on plasmid recombination and found that Bacillus subtilis efficiently recombines sequences with 4% divergence, and Escherichia coli mutS is more appropriate for sequences with 22% divergence.     

Secretion cloning vectors in Escherichia coli

The DNA fragment coding for the signal peptide of the OmpA protein, a major outer membrane protein of Escherichia coli, has been inserted into the high-level expression vectors, pIN-III. A foreign DNA fragment can be cloned in any one of the three reading frames at the unique EcoRI, HindIII or BamHI sites immediately after the ompA signal peptide coding sequence. The cloned foreign gene is under the control of both the lpp promoter and the lac promoter-operator. The expression of the gene is regulated by the lac repressor produced by the same vectors. Using the pIN-III-ompA vector, the DNA fragment coding for only the mature portion of beta-lactamase was inserted into the EcoRI site. Upon induction of gene expression, beta-lactamase was secreted into the periplasmic space. The ompA signal peptide was correctly removed resulting in the production of beta-lactamase with four extra amino acid residues (Gly-Ile-Pro-Gly) at its amino terminus due to the linker sequence in the vector. After a 3-h induction, beta-lactamase was accumulated to 20% of total cellular protein without any detectable accumulation of pro-beta-lactamase. Using oligonucleotide-directed site-specific mutagenesis, we have also removed the linker sequence and upon induction of gene expression, beta-lactamase with the authentic NH2-terminal sequence was produced, in even larger amounts than the beta-lactamase with the linker sequence.