Experimental Study on Localized Surface Plasmon Mode Hybridization in the Near and Mid Infrared

We investigate plasmon excitations within a regular grating of double-layered gold/insulator nanoparticles in the infrared and visible spectral region. Provided a flat gold film as substrate, strong coupling between the localized surface plasmon modes and their image-like excitations in the metal is observed. The interaction results in a strong red shift of the plasmon mode as well as the splitting of the modes into levels of different angular momenta, often referred to as plasmon hybridization. The diameters of the nanoparticles are designed in a way that the splitting of the resonances occurs in the spectral region between 0.1 and 1 eV, thus being accessible using an infrared microscope. Moreover, we investigated the infrared absorption signal of gratings that contain two differently sized nanoparticles. The interaction between two autonomous localized surface plasmon excitations is investigated by analyzing their crossing behavior. In contrast to the interaction between localized surface plasmons and propagating plasmon excitations which results in pronounced anticrossing, the presented structures show no interaction between two autonomous localized surface plasmons. Finally, plasmon excitations of the nanostructured surfaces in the visible spectral region are demonstrated through photographs acquired at three different illumination angles. The change in color of the gratings demonstrates the complex interaction between propagating and localized surface plasmon modes.     

Sensitive label-free biosensors by using gap plasmons in gold nanoslits

The detection sensitivities of gap plasmons in gold nanoslit arrays are studied and compared with surface plasmons on outside surface. The nanoslit arrays were fabricated in a 130 nm-thick gold film with various slit widths. For transverse-magnetic (TM) incident wave, the 600 nm-period nanoslit array shows two distinguishable transmission peaks corresponding to the resonances of gap plasmons and surface plasmons, respectively. The surface sensitivities for both modes were compared by coating thin SiO(2) film and different biomolecules on the nanoslit arrays. Our experimental results verify gap plasmons are more sensitive than conventional surface plasmons. Its detection sensitivity increases with the decrease of slit width. The gap plasmon is one order of magnitude sensitive than the surface plasmon for slit widths smaller than 30 nm. We attribute this high sensitivity to the large overlap between biomolecules and nanometer-sized gap plasmons.     

Tunnel Light Through a Continuous Optically Thick Metal Film Utilizing Higher Order Magnetic Plasmon Resonance

In this letter, we investigate the extraordinary optical transmission behavior of a flat continuous metal film sandwiched by magnetic plasmonic structures. A new mechanism by utilizing higher order magnetic plasmon resonance is proposed to enhance the transmission. Numerical simulation results show that 80 % electromagnetic energy can be transmitted through the middle 50-nm-thick continuous gold film in near-infrared regime. The excitation of the second-order magnetic plasmons and the propagating surface plasmons, as well as the interaction between them accounts for such a high transmission. The interaction of magnetic plasmons and surface plasmons leads to new hybrid modes, and the coupled oscillator model is introduced to analyze this hybridization. This work extends the application range of higher order magnetic plasmons and may have potential in transparent electrode and electromagnetic energy transfer applications.     

Low Energy Intraband Plasmons and Electron Energy Loss Spectra of Single and Multilayered Graphene

We present a theory for the calculation of the low energy intraband plasmon frequencies and the electron energy loss (EEL) spectra of single layer and multilayer graphene sheets. Our calculation shows that the number of plasmons that can be excited is equal to the number of graphene layers in the sample. One of these is the dominant in-phase plasmon having a square root dependence on the wave number at low wave vectors, whereas the others are out-of-phase plasmons having near linear dependences on the wave number. The EEL spectra of a single layer graphene shows a single peak at the plasmon frequency, which has been observed experimentally. The EEL spectra of all multilayer graphenes have two peaks, one corresponding to the dominant in-phase plasmon and the other due to the out of phase plasmons. We predict that careful measurement of the EEL of multilayer graphene will show both peaks due to the low energy intraband plasmons.

     

Subradiant,Superradiant Plasmon Modes and Fano Resonance in a Multilayer Nanocylinder Array Standing on a Thin Metal Film

The optical properties of a novel nanostructure consisting of a hexagonal array of aligned vertically three-layered metal-dielectric-metal nanodisks on a silver film are theoretically studied through the finite-difference time-domain method. The novel nanostructure exhibits three obvious optical transmission bands due to the excitation of subradiant plasmon modes, superradiant plasmon modes, and Fano resonances. Surface plasmon polaritons of the underlying Ag film also play a significant role on these three optical transmission bands via coupling with localized surface plasmons of nanodisk pairs. Moreover, the nanostructure also exhibits a good tunability of optical response by modifying the sizes of cylinders, the thickness of underlying metal film, and the dielectric constant of middle layer. These results demonstrate the nanostructure with great advantages in optical sensors and filters.

     

Plasmonic Properties of Gold Nanostructures on Gold Film

This paper reports on a systematic study of the plasmonic properties of periodic arrays of gold cylindrical nanoparticles in contact with a gold thin film. Depending on the gold film thickness, it observes several plasmon bands. Using a simple analytical model, it is able to assign all these modes and determine that they are due to the coupling of the grating diffraction orders with the propagating surface plasmons travelling along the film. With finite difference time domain (FDTD) simulations, it demonstrates that large field enhancement occurs at the surface of the nanocylinders due to the resonant excitation of these modes. By tilting the sample, it also observes the evolution of the spectral position of these modes and their tuning through nearly the whole visible range is possible. Such plasmonic substrates combining both advantages of the propagative and localised surface plasmons could have large applications in enhanced spectroscopies.

     

Plasmon Modes Management

A new plasmonic structure based on bimetallic layer is proposed. We analyze the structure and show that bimetallic film plays a crucial role in the management of surface plasmons. The roll of the buffer is discussed, as well. Up to three surface plasmons can be excited simultaneously in the structure. Two of plasmons can be used for two-plasmon spectroscopy. The third plasmon can be used for controlling the temperature of the structure.     

Surface plasmon resonance imaging on a microchip for detection of DNA-modified gold nanoparticles deposited onto the surface in a non-cross-linking configuration

We report theoretical predictions and experimental observations of the reduced detection volume with the use of surface-plasmon-coupled emission (SPCE). The effective fluorescence volume (detection volume) in SPCE experiments depends on two near-field factors: the depth of evanescent wave excitation and a distance-dependent coupling of excited fluorophores to the surface plasmons. With direct excitation of the sample (reverse Kretschmann excitation) the detection volume is restricted only by the distance-dependent coupling of the excitation to the surface plasmons. However, with the excitation through the glass prism at surface plasmon resonance angle (Kretschmann configuration), the detection volume is a product of evanescent wave penetration depth and distance-dependent coupling. In addition, the detection volume is further reduced by a metal quenching of excited fluorophores at a close proximity (below 10nm). The height of the detected volume size is 40-70nm, depending on the orientation of the excited dipoles. We show that, by using the Kretschmann configuration in a microscope with a high-numerical-aperture objective (1.45) together with confocal detection, the detection volume can be reduced to 1-2attoL. The strong dependence of the coupling to the surface plasmons on the orientation of excited dipoles can be used to study the small conformational changes of macromolecules.     

Efficient Extraction of Fluorescence Emission Utilizing Multiple Surface Plasmon Modes from Gold Wire Gratings

We demonstrate directional enhanced fluorescence emission from fluorophores located above gold wire gratings. In contrast to previous studies on corrugated films, efficient coupling was recorded for multiple plasmon modes associated with both the active and substrate side of the wires. This difference is likely due to the subtle differences in how light interacts with corrugated films versus metal films with periodic subwavelength slots. For corrugated films, coupling between modes on opposite sides of the grating are out of phase, and therefore plasmon modes on the opposite side of the grating are only weakly excited. For wire gratings, transmission and reflection features have been modeled well with a dynamical diffraction model that includes surface plasmons, which allows for efficient coupling to surface plasmon modes on both sides of the grating. We also compared the two mechanisms for fluorescent enhancement, namely the intense electromagnetic field associated with surface plasmons and excited fluorophores radiating via surface plasmon modes. We found the latter mechanism clearly dominant.     

Single-Particle Spectroscopy of Supported Silver Clusters on Silicon: Substrate Effects on Localized Surface Plasmons

The presence of a surrounding medium strongly affects the spectral properties of localized surface plasmons at metallic nanoparticles. Vice versa, plasmonic resonances have large impact on the electric polarization in a surrounding or supporting material. For applications, e.g., in light-converting devices, the coupling of localized surface plasmons with polarizations in semiconducting substrates is of particular importance. Using photoemission electron microscopy with tunable laser excitation, we perform single-particle spectroscopy of silver nanoclusters directly grown on Si(100). Two distinct localized surface plasmon modes are observed as resonances in the two-photon photoemission signals from individual silver clusters. The strengths of these resonances strongly depend on the polarization of the exciting electric field, which allows us to assign them to plasmon modes with polarizations parallel and perpendicular, respectively, to the supporting silicon substrate. Our mode assignment is supported by simulations which provide insight into the mutual interaction of charge oscillations at the particle surface with electric polarizations at the silver/silicon interface.

     

Controllable Mode Hybridization and Interaction Within a Plasmonic Cavity Formed by Two Bimetallic Gratings

We theoretically study mode hybridization and interaction among surface plasmon polariton Bloch wave mode, Fabry–Perot cavity mode, and waveguide mode within a plasmonic cavity composed by two parallel planar bimetallic gratings. Four hybridized modes result from mode hybridization between surface plasmon polariton Bloch wave modes on the two gratings are observed. By changing the dielectric environment, mode hybridization behavior can be manipulated. Importantly, waveguide-plasmon polariton mode due to hybridization between grating supported surface plasmon polariton Bloch wave mode and cavity supported waveguide mode is observed. We demonstrate that surface plasmon polariton Bloch wave mode and Fabry–Perot cavity mode with the same mode symmetry can interact by presenting an anticrossing behavior, which can be controlled by laterally shifting one grating with respect to the other that causes a phase difference shift of the two involving modes. The proposed plasmonic cavity offers potentials for subwavelength lithography, tunable plasmonic filter, and controllable light-matter interaction.     

Multiple Surface Plasmon Resonances in Compound Structure with Metallic Nanoparticle and Nanohole Arrays

The optical properties of a compound structure with metallic nanoparticle and nanohole arrays are numerically investigated by the means of finite-difference time domain method. We report on the observation of multi-valleys in the reflection spectra due to the excitation of surface plasmon (SP) resonant modes of the compound structure. Simulation results show that multiple SP resonances consist of surface plasmon polaritons on the gold film, localized surface plasmons on the nanoparticles, and coupling mode between them. These findings are important for applications utilizing multiple surface plasmon resonances.     

FDTD Study on Evolution of Trimer Silver@Silica Nanospheres to Dimer for SERS Characteristics

Light enhancement occurs strongly within the plasmonic clusters by interaction with surface plasmons. Surface-enhanced Raman spectroscopic (SERS) characteristics of a series of silver@silica trimer core–shell (CS) nanosphere (NS) clusters are investigated in this paper. It is significant to understand the electric field (EF) enhancement mechanism behind the SERS technique. The effect of symmetry breaking is studied for the series starting from the highly symmetric trimer cluster and transformed to linear dimer geometry which progresses through the gradual reduction in the vertex NS. The optical activity such as the evolution of LSPR peak is discussed, the formation of hot spots is demonstrated and the strength of the local EF enhancement is calculated and correlated with the plasmon dipolar modes by using plasmon hybridization theory to understand the underlying physical concepts.

     

Surface Plasmon Polariton Propagation at the Interface of a Metal and an Ambichiral Nanostructured Medium

The propagation of a surface plasmon polariton wave at the interface of a metal and an ambichiral nanostructured medium was theoretically investigated in the Kretschmann configuration using transfer matrix method. The dependence of optical absorption linear polarization on structural parameters was reported. The results were compared with those obtained from the interface of a metal and a chiral dielectric medium as a reference structure. We found that multiple plasmon modes are excited at the interface of metal and ambichiral dielectric medium. Our calculations revealed that there exist five plasmon modes for chiral, trigonal, and tetragonal structures; three plasmon modes for pentagonal structure; two plasmon modes for hexagonal structure; and one plasmon mode for dodecagonal structure that propagate with different phase speeds. The obtained results showed that only one plasmon mode occurs at all pitches, while other modes exist at some of the pitches of anisotropic chiral and ambichiral dielectric mediums. The time-averaged Poynting vector versus the thickness of metal film confirmed that the energy of photons of incident light is transferred to surface plasmon polariton quasiparticles and the surface plasmon polariton wave is localized at the interface of metal and ambichiral dielectric medium.     

Spoof Localized Surface Plasmons Excited by Plasmonic Waveguide Chip with Corrugated Disk Resonator

We designed and fabricated a millimeter plasmonic chip consisted of coplanar waveguide (CPW) and plasmonic waveguide with one corrugated disk resonator (CDR). The spoof localized surface plasmon (LSP) resonance modes can be excited by the interaction between plasmonic waveguide and CDR. Fundamental and higher order sharp spoof LSP resonances (from dipole to dodecapole) were observed in the transmission coefficient spectrum. The Q-value as high as 268.3 (octupole) was experimentally obtained. Experimental results show good agreement with theoretical and simulated ones. All the results may have potential applications in microchip based sensing and filtering.     

Surface Plasmon Polariton Modes at Interface of a Metal and an Ambichiral Sculptured Thin Film

The excitation of surface plasmon polariton (SPP) at interface of a metal and an ambichiral sculptured thin film was theoretically investigated in the Kretschmann configuration using the transfer matrix method. The dependence of SPP modes for a P polarization plane wave on the incident angle of light and the angle of rise of nanocolumns of ambichiral dielectric medium was reported. We found that multiple SPP modes are excited at the interface of metal and ambichiral dielectric medium. The results of phase speed as a function of pitch showed only that a SPP mode can be excited at all pitches.     

Application of surface plasmon coupled emission to study of muscle

Muscle contraction results from interactions between actin and myosin cross-bridges. Dynamics of this interaction may be quite different in contracting muscle than in vitro because of the molecular crowding. In addition, each cross-bridge of contracting muscle is in a different stage of its mechanochemical cycle, and so temporal measurements are time averages. To avoid complications related to crowding and averaging, it is necessary to follow time behavior of a single cross-bridge in muscle. To be able to do so, it is necessary to collect data from an extremely small volume (an attoliter, 10(-18) liter). We report here on a novel microscopic application of surface plasmon-coupled emission (SPCE), which provides such a volume in a live sample. Muscle is fluorescently labeled and placed on a coverslip coated with a thin layer of noble metal. The laser beam is incident at a surface plasmon resonance (SPR) angle, at which it penetrates the metal layer and illuminates muscle by evanescent wave. The volume from which fluorescence emanates is a product of two near-field factors: the depth of evanescent wave excitation and a distance-dependent coupling of excited fluorophores to the surface plasmons. The fluorescence is quenched at the metal interface (up to approximately 10 nm), which further limits the thickness of the fluorescent volume to approximately 50 nm. The fluorescence is detected through a confocal aperture, which limits the lateral dimensions of the detection volume to approximately 200 nm. The resulting volume is approximately 2 x 10(-18) liter. The method is particularly sensitive to rotational motions because of the strong dependence of the plasmon coupling on the orientation of excited transition dipole. We show that by using a high-numerical-aperture objective (1.65) and high-refractive-index coverslips coated with gold, it is possible to follow rotational motion of 12 actin molecules in muscle with millisecond time resolution.     

Radiative decay engineering 3. Surface plasmon-coupled directional emission

A new method of fluorescence detection that promises to increase sensitivity by 20- to 1000-fold is described. This method will also decrease the contribution of sample autofluorescence to the detected signal. The method depends on the coupling of excited fluorophores with the surface plasmon resonance present in thin metal films, typically silver and gold. The phenomenon of surface plasmon-coupled emission (SPCE) occurs for fluorophores 20-250 nm from the metal surface, allowing detection of fluorophores over substantial distances beyond the metal-sample interface. SPCE depends on interactions of the excited fluorophore with the metal surface. This interaction is independent of the mode of excitation; that is, it does not require evanescent wave or surface-plasmon excitation. In a sense, SPCE is the inverse process of the surface plasmon resonance absorption of thin metal films. Importantly, SPCE occurs over a narrow angular distribution, converting normally isotropic emission into easily collected directional emission. Up to 50% of the emission from unoriented samples can be collected, much larger than typical fluorescence collection efficiencies near 1% or less. SPCE is due only to fluorophores near the metal surface and may be regarded as emission from the induced surface plasmons. Autofluorescence from more distal parts of the sample is decreased due to decreased coupling. SPCE is highly polarized and autofluorescence can be further decreased by collecting only the polarized component or only the light propagating with the appropriate angle. Examples showing how simple optical configurations can be used in diagnostics, sensing, or biotechnology applications are presented. Surface plasmon-coupled emission is likely to find widespread applications throughout the biosciences.     

Nanostructuring of Continuous Gold Film by Laser Radiation Under Surface Plasmon Polariton Resonance Conditions

The physical mechanisms of metallic nanoparticles formation by laser technology were studied. The system air/Au film/glass was irradiated by laser at the conditions of surface plasmon resonance. A surface electromagnetic wave was excited in Kretchmann configuration by the fundamental and second harmonics of the Q-switched YAG/Nd⁺³ laser with pulse power density close to the threshold of melting. Nanostructuring of Au film was observed only for the second harmonic (λ = 0.532 μm) irradiation at the surface plasmon polariton resonance (SPR) conditions. Estimations were done using the interference model of the differently directed plasmon polariton waves excited by a surface electromagnetic wave on the metal surface. It was shown that a regular pattern of locally heated spots can be formed in a metallic film by pulsed laser irradiation. The spatial distribution of this pattern is close to the period of interference. The observed effect of laser nanofragmentation is explained by the self-organization of plasmon polariton subsystem in the process of Au nanoparticles formation at high laser intensity levels. These methods open new possibilities for nanostructured surfaces formation utilizing simple self-organization processes.     

Plasmon Hybridization in Silver Nanoislands as Semishells Arrays Coupled to a Thin Metallic Film

We obtained experimentally strong plasmon interactions between localized surface plasmon with delocalized surface plasmon polaritons in a new nanosystem of silver semishells island film arrays arranged as a closed-packing structure coupled to an adjacent thin silver film. We show that plasmon interactions for such a nanosystem exhibits two pronounced resonances and interpret the coupling in terms of Fano resonances. The higher energy resonance is identified as a symmetric hybridization mode between localized plasmon resonances in the island semishell array and surface plasmon polaritons in the metal film and while the lower energy resonance is identified as a corresponding anti-symmetric hybridization mode. Increasing the size of the particle arrays enhances and red shifts the resonances. We show that adding a dielectric spacer between the semishell island array and the metal film results in a red shifting of the resonances and introduce an additional high energy spectral peak. The effect of the spacer layer is interpreted as a reduced hybridization and the generation of additional localized surface plasmon resonances.