Quantitative Analysis and Visualized Evidence for High Charge Separation Efficiency in a Solid‐Liquid Bulk Heterojunction

In the past few decades, some novel low‐cost nanostructured devices have been explored for converting solar energy into electrical or chemical energy, such as organic photovoltaic cells, photoelectrochemical solar cells, and solar water splitting cells. Generally, higher light absorption and/or charge separation efficiency are considered as the main reasons for improved performance in a nanostructured device versus a planar structure. However, quantitative analysis and definite experimental evidence remain elusive. Here, using BiVO₄ as an example, comparable samples with porous and dense structures have been prepared by a simple method. The porous and dense films are assembled into a solid‐electrolyte bulk and planar heterojunction, respectively. Some quantitative results are obtained by decoupling photon absorption, interfacial charge transfer, and charge separation processes. These results suggest that higher charge separation efficiency is mainly responsible for enhanced performance in a solid‐electrolyte bulk heterojunction. Moreover, we also present visualized evidence to show higher charge separation efficiency comes from a shorter photo‐generated hole diffusion distance in a bulk heterojunction. These results can deepen understanding charge transfer in a bulk heterojunction and offer guidance to design a more efficient low‐cost device for solar conversion and storage.     

Light Absorption and Recycling in Hybrid Metal Halide Perovskite Photovoltaic Devices

The production of highly efficient single‐ and multijunction metal halide perovskite (MHP) solar cells requires careful optimization of the optical and electrical properties of these devices. Here, precise control of CH₃NH₃PbI₃ perovskite layers is demonstrated in solar cell devices through the use of dual source coevaporation. Light absorption and device performance are tracked for incorporated MHP films ranging from ≈67 nm to ≈1.4 µm thickness and transfer‐matrix optical modeling is utilized to quantify optical losses that arise from interference effects. Based on these results, a device with 19.2% steady‐state power conversion efficiency is achieved through incorporation of a perovskite film with near‐optimum predicted thickness (≈709 nm). Significantly, a clear signature of photon reabsorption is observed in perovskite films that have the same thickness (≈709 nm) as in the optimized device. Despite the positive effect of photon recycling associated with photon reabsorption, devices with thicker (>750 nm) MHP layers exhibit poor performance owing to competing nonradiative charge recombination in a “dead‐volume” of MHP. Overall, these findings demonstrate the need for fine control over MHP thickness to achieve the highest efficiency cells, and accurate consideration of photon reabsorption, optical interference, and charge transport properties.     

Fabrication of Ag Nanoparticles Embedded in Al:ZnO as Potential Light-Trapping Plasmonic Interface for Thin Film Solar Cells

Incident photon conversion efficiency of the absorbing materials at either side of a thin film solar module can be enhanced by integrating a plasmonic interface. Silver nanoparticles represent a good candidate that can be integrated to a thin film solar cell for efficient light-trapping. The aim of this work is to fabricate plasmonically active interface consisting of Ag nanoparticles embedded in Al:ZnO that has the potential to be used at the front surface and at the back reflector of a thin film solar cell to enhance light-trapping and increase the photoconversion efficiency. We show that Ag can readily dewet the Al:ZnO surface when annealed at temperatures significantly lower than the melting temperature of Ag, which is beneficial for lowering the thermal budget and cost in solar cell fabrication. We find that such an interface fabricated by a simple dewetting technique leads to plasmonic resonance in the visible and near infrared regions of the solar spectrum, which is important in enhancing the conversion efficiency of thin film solar cells.     

Broadband Enhancement of PbS Quantum Dot Solar Cells by the Synergistic Effect of Plasmonic Gold Nanobipyramids and Nanospheres

For the first time, the plasmonic gold bipyramids (Au BPs) are introduced to the PbS colloidal quantum dot (CQD) solar cells for improved infrared light harvesting. The localized surface plasmon resonance peaks of Au BPs matches perfectly with the absorption peaks of conventional PbS CQDs. Owing to the geometrical novelty of Au BPs, they exhibit significantly stronger far‐field scattering effect and near‐field enhancement than conventional plasmonic Au nanospheres (NSs). Consequently, device open‐circuit voltage (V_oc) and short‐circuit current (J_sc) are simultaneously enhanced, while plasmonic photovoltaic devices based on Au NSs only achieve improved J_sc. The different effects and working mechanisms of these two Au nanoparticles are systematically investigated. Moreover, to realize effective broadband light harvesting, Au BPs and Au NSs are used together to simultaneously enhance the device optical and electrical properties. As a result, a significantly increased power conversion efficiency (PCE) of 9.58% is obtained compared to the PCE of 8.09% for the control devices due to the synergistic effect of the two plasmonic Au nanoparticles. Thus, this work reveals the intriguing plasmonic effect of Au BPs in CQD solar cells and may provide insight into the future plasmonic enhancement for solution‐processed new‐generation solar cells.     

Device Architectures for Enhanced Photon Recycling in Thin‐Film Multijunction Solar Cells

Multijunction (MJ) solar cells have the potential to operate across the entire solar spectrum, for ultrahigh efficiencies in light to electricity conversion. Here an MJ cell architecture is presented that offers enhanced capabilities in photon recycling and photon extraction, compared to those of conventional devices. Ideally, each layer of a MJ cell should recycle and re‐emit its own luminescence to achieve the maximum possible voltage. This design involves materials with low refractive indices as interfaces between sub‐cells in the MJ structure. Experiments demonstrate that thin‐film GaAs devices printed on low‐index substrates exhibit improved photon recycling, leading to increased open‐circuit voltages (V _oc), consistent with theoretical predictions. Additional systematic studies reveal important considerations in the thermal behavior of these structures under highly concentrated illumination. Particularly when combined with other optical elements such as anti‐reflective coatings, these architectures represent important aspects of design for solar cells that approach thermodynamic efficiency limits for full spectrum operation.     

Full‐Spectrum Liquid‐Junction Quantum Dot–Sensitized Solar Cells by Integrating Surface Plasmon–Enhanced Electrocatalysis

Full‐spectrum solar energy utilization is the ultimate goal of high‐performance photovoltaic devices. However, the present approaches to enhance sunlight harvesting in the cost‐effective quantum dot–sensitized solar cells mainly focus on the use of high‐frequency photons with the long‐wavelength sunlight being left behind. Here, a full‐spectrum solar cell architecture is proposed and the near‐infrared light–enhanced cell performance is demonstrated with a plasmonic and electrocatalytic dual‐function CuS nanostructure electrode. In the CdS/CdSe quantum dot–sensitized solar cells, an enhancement factor as high as 15% in power conversion efficiency is obtained for the device with near‐infrared part of 1‐sun light irradiating from the counter electrode side and ultraviolet–visible part incidence from the photoanode side. Electrochemical characterizations show that the enhanced electrocatalytic activity toward polysulfide reduction is attributed to the better device performance. This may be due to the plasmon‐induced photothermal effect and interfacial energy transfer from the counter electrode under the near‐infrared light, which accelerate the preceding chemical reactions for polysulfide reduction and improve the charge transfer at the electrode–electrolyte interface. This strategy provides an alternative way to achieve a full‐spectrum liquid‐junction solar cell via the integration of plasmon‐enhanced electrocatalysis into photovoltaics.     

High‐Performance Tandem Organic Solar Cells Using HSolar as the Interconnecting Layer

Tandem structure provides a practical way to realize high efficiency organic photovoltaic cells, it can be used to extend the wavelength coverage for light harvesting. The interconnecting layer (ICL) between subcells plays a critical role in the reproducibility and performance of tandem solar cells, yet the processability of the ICL has been a challenge. In this work the fabrication of highly reproducible and efficient tandem solar cells by employing a commercially available material, PEDOT:PSS HTL Solar (HSolar), as the hole transporting material used for the ICL is reported. Comparing with the conventional PEDOT:PSS Al 4083 (c‐PEDOT), HSolar offers a better wettability on the underlying nonfullerene photoactive layers, resulting in better charge extraction properties of the ICL. When FTAZ:IT‐M and PTB7‐Th:IEICO‐4F are used as the subcells, a power conversion efficiency (PCE) of 14.7% is achieved in the tandem solar cell. To validate the processability of these tandem solar cells, three other research groups have successfully fabricated tandem devices using the same recipe and the highest PCE obtained is 16.1%. With further development of donor polymers and device optimization, the device simulation results show that a PCE > 22% can be realized in tandem cells in the near future.     

Significant Efficiency Enhancement in Ultrathin CZTS Solar Cells by Combining Al Plasmonic Nanostructures Array and Antireflective Coatings

In the few past years, the economic and eco-friendly Cu₂ZnSnS₄ (CZTS) solar cells have caught lots of attentions. However, due to rather poor efficiency, identifying deficiencies and making improvements is necessary. In the present study, the performance improvement of ultrathin CZTS solar cells was achieved through (1) incorporation of anti-reflective coating (ARC) on the surface of cell and (2) embedding Al plasmonic nanostructures with different radius, periods, and vertical positions in the absorber layer. Various thicknesses of CZTS absorber layer were simulated optically and electrically using FDTD and DEVICE solver of Lumerical software. The reference solar cell consists of a 1.5-nm-thick CZTS absorber and exhibit an efficiency of up to 5.67%, short-circuit current density (Jsc) of 18.48 mA cm⁻² and open circuit voltage of 0.58 V. Result showed a remarkable performance enhancement of the solar cell in spite of a very thin absorber layer. For a 500-μm-thick CZTS solar cell with the assistance of ARC and embedding Al plasmonic nanostructures, the efficiency is increased to 7.45% due to an increase in Jsc to 22.62 mA cm⁻² with an open circuit voltage of 0.62 V.

     

Thirty Years of Luminescent Solar Concentrator Research: Solar Energy for the Built Environment

Research on the luminescent solar concentrator (LSC) over the past thirty‐odd years is reviewed. The LSC is a simple device at its heart, employing a polymeric or glass waveguide and luminescent molecules to generate electricity from sunlight when attached to a photovoltaic cell. The LSC has the potential to find extended use in an area traditionally difficult for effective use of regular photovoltaic panels: the built environment. The LSC is a device very flexible in its design, with a variety of possible shapes and colors. The primary challenge faced by the devices is increasing their photon‐to‐electron conversion efficiencies. A number of laboratories are working to improve the efficiency and lifetime of the LSC device, with the ultimate goal of commercializing the devices within a few years. The topics covered here relate to the efforts for reducing losses in these devices. These include studies of novel luminophores, including organic fluorescent dyes, inorganic phosphors, and quantum dots. Ways to limit the surface and internal losses are also discussed, including using organic and inorganic‐based selective mirrors which allow sunlight in but reflect luminophore‐emitted light, plasmonic structures to enhance emissions, novel photovoltaics, alignment of the luminophores to manipulate the path of the emitted light, and patterning of the dye layer to improve emission efficiency. Finally, some possible ‘glimpses of the future’ are offered, with additional research paths that could result in a device that makes solar energy a ubiquitous part of the urban setting, finding use as sound barriers, bus‐stop roofs, awnings, windows, paving, or siding tiles.     

Photobrightening in Lead Halide Perovskites: Observations,Mechanisms, and Future Potential

There has been a meteoric rise in the commercial potential of lead halide perovskite optoelectronic devices since photovoltaic cells and light‐emitting diodes based on these materials were first demonstrated. One key challenge common to each of these optoelectronic devices is the need to suppress nonradiative recombination, a process that limits the maximum achievable efficiency in photovoltaic cells and light‐emitting diodes. In this Progress Report, recent studies that seek to minimize this loss pathway in perovskites through a photobrightening treatment, whereby the luminescence efficiency is enhanced through a light illumination passivation process are examined. The sensitivity of this effect to various experimental considerations is examined, including atmosphere, photon energy, photon dose, and also the role of perovskite composition and morphology; under certain conditions there can even be photodarkening effects. Consideration of these factors is critical to resolve seemingly conflicting literature reports. Proposed mechanisms are scrutinized, revealing that there is now some consensus but further work is needed to identify the specific defects being passivated and elucidate universal mechanisms. Finally, the prospects for these treatments to minimize halide migration and push the properties of polycrystalline films towards those of their single‐crystal counterparts are discussed.     

Tunable Properties of Surface Plasmon Resonance of Metal Nanospheroid: Graphene Plasmon Interaction

Plasmonics - Graphene plasmonic resonances play a significant role for enhancing the photon absorption inside thin film solar devices. We investigate the field rising at the intersection of...     

Plasmonic Wood for High‐Efficiency Solar Steam Generation

Plasmonic metal nanoparticles are a category of plasmonic materials that can efficiently convert light into heat under illumination, which can be applied in the field of solar steam generation. Here, this study designs a novel type of plasmonic material, which is made by uniformly decorating fine metal nanoparticles into the 3D mesoporous matrix of natural wood (plasmonic wood). The plasmonic wood exhibits high light absorption ability (≈99%) over a broad wavelength range from 200 to 2500 nm due to the plasmonic effect of metal nanoparticles and the waveguide effect of microchannels in the wood matrix. The 3D mesoporous wood with numerous low‐tortuosity microchannels and nanochannels can transport water up from the bottom of the device effectively due to the capillary effect. As a result, the 3D aligned porous architecture can achieve a high solar conversion efficiency of 85% under ten‐sun illumination (10 kW m^?2). The plasmonic wood also exhibits superior stability for solar steam generation, without any degradation after being evaluated for 144 h. Its high conversion efficiency and excellent cycling stability demonstrate the potential of newly developed plasmonic wood to solar energy‐based water desalination.     

Photo‐Rechargeable Electric Energy Storage Systems

The global energy demand is increasing at the same time as fossil fuel resources are dwindling. Consequently, the search for alternative energy sources is a major topic worldwide. Solar energy is one of the most promising, effective and emission‐free energy sources. However, the energy has to be stored to compensate the fluctuating availability of the sun and the actual energy demand. Photo‐rechargeable electric energy storage systems may solve this problem by immediately storing the generated electricity. Different combinations of solar cells and storage devices are possible. High efficiencies can be achieved by the combination of dye‐sensitized solar cells (DSSC) and capacitors. However, other hybrid devices including DSSCs or organic photovoltaic systems and redox flow batteries, lithium ion batteries and metal air batteries are playing an increasing role in this research field. This Progress Report reviews the state of the art research of photo‐rechargeable batteries based on organic solar cells, as well as storage modules.     

Solar‐to‐Hydrogen Energy Conversion Based on Water Splitting

Artificial photosynthesis provides a blueprint to harvest solar energy to sustain the future energy demands. Solar‐driven water splitting, converting solar energy into hydrogen energy, is the prototype of photosynthesis. Various systems have been designed and evaluated to understand the reaction pathways and/or to meet the requirements of potential applications. In solar‐to‐hydrogen conversion, electrocatalytic hydrogen and oxygen evolution reactions are key research areas that are meaningful both theoretically and practically. To utilize hydrogen energy, fuel cell technology has been extensively investigated because of its high efficiency in releasing chemical energy. In this review, general concepts of the photosynthesis in green plants are discussed, different strategies for the light‐driven water splitting proposed in laboratories are introduced, the progress of electrocatalytic hydrogen and oxygen evolution reactions are reviewed, and finally, the reactions in hydrogen fuel cells are briefly discussed. Overall, the mass and energy circulation in the solar‐hydrogen‐electricity circle are delineated. The authors conclude that attention from scientists and engineers of relevant research areas is still highly needed to eliminate the wide disparity between the aspirations and realities of artificial photosynthesis.     

Water Splitting Progress in Tandem Devices: Moving Photolysis beyond Electrolysis

Water photolysis is a sustainable technology to convert natural solar energy and water into chemical fuels and is thus considered a thorough solution to the forthcoming energy crises. Unassisted water splitting that could directly harvest solar light and subsequently split water in a single device has become an important research theme. Three types of tandem devices including photoelectrochemical (PEC), photovoltaic (PV) cell/PEC and PV/electrolyser tandem cells are proposed to realize water photolysis at different levels of integration and component. Recent progress in tandem water splitting devices is summarized, and crucial issues on device optimization from the perspective of each photo‐absorber functionalities in band edge potential, light absorptivity and transmittance are discussed. By increasing the performances of stand‐alone PEC or PV devices, a 20% solar to hydrogen efficiency is predicted that is a significant value towards further application in practice. Accordingly, the challenges for materials development and configuration optimization are further outlined.     

Numerical Study of Plasmonic Effects of Ag Nanoparticles Embedded in the Active Layer on Performance Polymer Organic Solar Cells

In this paper, the light absorption in the active layer of polymer solar cells (OPV) by using plasmonic nanocrystals with a hexagonal lattice structure is investigated. To study the relationship between the performance of the OPV solar cell and its active layer, a three-dimensional model of its morphology is utilized. Therefore, the three-dimensional (3D) finite-difference time-domain method and Lumerical software were used to measure the field distribution and light absorption in the active layer in terms of wavelength. OPV solar cells with bilayer and bulk heterojunction structured cells were designed using hexagonal lattice crystals with plasmonic nanoparticles, as well as core–shell geometry to govern a design to optimize light trapping in the active layer. The parameters of shape, material, periodicity, size, and the thickness of the active layer as a function of wavelength in OPV solar cells have been investigated. A very thin active layer and an ultra-thin shell were used to achieve the highest increase in optical absorption. The strong alternating electromagnetic field around the core–shell plasmonic nanoparticles resulting from the localized surface plasmon resonance (LSPR) suggested by the Ag plasmonic nanocrystals increased the intrinsic optical absorption in the active layer poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM). Based on the photovoltaic results, the short circuit current ranged from 19.7 to 26.7 mA/cm².

     

Highest Efficiency Plasmonic Polycrystalline Silicon Thin-Film Solar Cells by Optimization of Plasmonic Nanoparticle Fabrication

Excitation of surface plasmons in metallic nanoparticles is a promising method for increasing the light absorption in solar cells and hence the cell photocurrent. Comprehensive optimization of a nanoparticle fabrication process for enhanced performance of polycrystalline silicon thin-film solar cells is presented. Three factors were studied: the Ag precursor film thickness, annealing temperature and time. The thickness of the precursor film was 10, 14 and 20 nm; annealing temperature was 190, 200, 230 and 260 °C; and annealing time was varied between 20 and 95 min. Performance enhancement due to light-scattering by nanoparticles was calculated by comparing absorption, short-circuit current density and energy conversion efficiency in solar cells with and without nanoparticles formed under different process conditions. Nanoparticles formed from 14-nm-thick Ag precursor film annealed at 230 °C for 53 min result in the highest absorption enhancement in the 700–1,100 nm wavelength range, in the highest enhancement of total short-circuit current density. The highest photocurrent enhancement was 33.5 %, which was achieved by the cell with the highest absorption enhancement in the 700–1,100 nm range. The plasmonic cell efficiency of 5.32 % was achieved without a back reflector and 5.95 % with the back reflector; which is the highest reported efficiency for plasmonic thin-film solar cells.     

Simple,Highly Efficient Vacuum‐Processed Bulk Heterojunction Solar Cells Based on Merocyanine Dyes

In order to be competitive on the energy market, organic solar cells with higher efficiency are needed. To date, polymer solar cells have retained the lead with efficiencies of up to 8%. However, research on small molecule solar cells has been catching up throughout recent years and is showing similar efficiencies, however, only for more sophisticated multilayer device configurations. In this work, a simple, highly efficient, vacuum‐processed small molecule solar cell based on merocyanine dyes – traditional colorants that can easily be mass‐produced and purified – is presented. In the past, merocyanines have been successfully introduced in solution‐processed as well as vacuum‐processed devices, demonstrating efficiencies up to 4.9%. Here, further optimization of devices is achieved while keeping the same simple layer stack, ultimately leading to efficiencies beyond the 6% mark. In addition, physical properties such as the charge carrier transport and the cell performance under various light intensities are addressed.     

Improvement on the Performance of InP/CdS Solar Cells with the Inclusion of Plasmonic Layer of Silver Nanoparticles

The effect of nano-Ag (n-Ag) plasmonic layer in InP/CdS solar cell structure was examined. An enhancement of short circuit current improving the overall cell efficiency was observed in InP/n-Ag/CdS cells. Location of the plasmonic layer in the above cell structure has been analyzed critically. The effect of introducing plasmonic layer on the overall performance of the cell has been studied in terms of the morphology, particle size distribution, optical absorption, I–V, C–V characteristics, and lifetime of the photo-generated carriers. Secondary ion mass spectroscopy (SIMS) studies were carried out for investigating possible interface alloying.     

Improving Solar Cells’ Light Trapping by the Low Loss Interface Photonic Crystals

Improving the silicon layer’s optical absorption is a key research point for crystalline silicon based thin film solar cells. Light trapping is a method widely adopted to achieve this research purpose. In this paper, we propose low loss interface photonic crystals layer (IPC), which is sandwiched between the crystalline silicon layer and the cover layer. The low loss interface photonic crystals layer could boost the light trapping efficiency significantly. The mechanism is that the smaller refraction index difference between silicon layer and the low loss interface photonic crystals layer could reduce the light’s interface reflection. Taking advantage of the coupling calculation by optical and electrical simulations, solar cell’s absorption efficiency and electrical performance parameters are obtained. Compared with optimized reference group, the maximum output power of the proposed solar cell could be improved by 6.44%. The result indicates that the proposed low loss interface photonic crystals layer is applicable for light’s trapping in crystalline silicon thin film solar cells.