The angle-variable tunable optical filter was strictly fabricated by two strategies of nanoimprint-coupled metal nanopatterning with improved cost-effectiveness and accessibility. The tunable optical properties and the performances of two strategies were experimentally examined and turned out to be well matched to numerical results. Tunable properties are obtained by three factors: size of fabricated Ag nanodisks, incident illumination angle, and fabrication strategies. The resonant extinction peak shifts were identified to show a large increase along with the increase in fabricated Ag disk size and increase in the incidence angle of illumination. When comparing a fabrication strategy, it was confirmed that the sample fabricated by the strip-off method has better stability on color changes with a consistent dependency on the incident angle. The presented strategies of fabrication are technically viable for obtaining well-defined plasmonic nanostructures so that it has the feasibility to apply for fascinating optical applications including display or tunable optical filters.
相似文献In this study, we present a high-performance tunable plasmonic absorber based on metal-insulator-metal nanostructures. High absorption is supported over a wide range of wavelengths, which is retained well at a very wide range of incident angles too. The coupling process occurs with high absorption efficiency of ∼ 99% by tuning the thickness of the dielectric layer. In addition, a complex trapezoidal nanostructure based on simple metal-insulator-metal structures by stacking different widths of Cu strip-nanostructures in the vertical direction has been put forward to enhance light absorption based on selective absorption. A trapezoidal sample has been designed with a solar absorption as high as 95% at wavelengths ranging from 300 nm to 2000 nm for different operating temperatures. Furthermore, the optical absorber has a very simple geometric structure and is easy to integrate into complex photonic devices. Perfect absorption and easy fabrication of the metal-insulator-metal structure make it an attractive device in numerous photonic applications.
相似文献Imaging applications at terahertz frequencies are, in general, limited to relatively low spatial resolution due to the effects of diffraction. By using a subwavelength aperture in the near-field, however, it is possible to achieve subwavelength resolution, although low transmission through the aperture limits the sensitivity of this approach. Plasmonic lenses in the form of bullseye structures, which consist of a circular subwavelength aperture surrounded by concentric periodic corrugations, have demonstrated enhanced transmission, thereby increasing the utility of near-field imaging configurations. In this paper, the design, fabrication, and experimental performance of plasmonic lenses optimized for 300 GHz are discussed. While nanofabrication techniques are required for optical applications, microfabrication techniques are sufficient for terahertz applications. The process flow for fabricating a double-sided bullseye structure using a precision micromilling technique is described. Transmission and beam profile measurements using a customized terahertz testbed are presented.
相似文献The design of thin-film semiconductor absorbers is a long-sought-after goal of crucial importance for optoelectronic devices. We propose a new strategy that achieves multi-band optical absorption in an ultra-thin semiconductor-insulator-metal nanostructure. The whole thickness of the absorber is just 60 nm, which is less than λ/12. The ultra-thin semiconductor resonators are used as the photonic coupling elements. The plasmonic metal layer with the thickness about 15 nm simultaneously acts as the transmission cancel layer and the plasmon source for resonant coupling with the optical near-field energy. The combined semiconductor resonators and the thin metal film produce strong electromagnetic field coupling and confinement effects, which mainly contribute to the efficient light trapping for the multi-band strong light absorption. The semiconductors such as Si, GaAs, and Ge are confirmed with the capability to show high light absorption via this simple hybrid metal-semiconductor resonant system. These features pave new insight on ultra-thin semiconductor absorbers and hold potential applications for optoelectronics such as nonlinear optics, hot-electron excitation and extraction, and the related devices.
相似文献The optical properties of a novel nanostructure consisting of a hexagonal array of aligned vertically three-layered metal-dielectric-metal nanodisks on a silver film are theoretically studied through the finite-difference time-domain method. The novel nanostructure exhibits three obvious optical transmission bands due to the excitation of subradiant plasmon modes, superradiant plasmon modes, and Fano resonances. Surface plasmon polaritons of the underlying Ag film also play a significant role on these three optical transmission bands via coupling with localized surface plasmons of nanodisk pairs. Moreover, the nanostructure also exhibits a good tunability of optical response by modifying the sizes of cylinders, the thickness of underlying metal film, and the dielectric constant of middle layer. These results demonstrate the nanostructure with great advantages in optical sensors and filters.
相似文献A tunable spoof surface plasmons antenna using sinusoidally modulated corrugated reactance surface based on a bulleye structure is proposed in this paper. The designed antenna is made of concentric metallic grooves etched on a metal plate, the depth of which is of sinusoidal periodic variation in the radial direction. This makes it possible that highly confined spoof surface plasmons along corrugated surface can be converted to radiation modes. The proposed bulleye antenna can work from 25.8 to 33 GHz and a bandwidth of 7.2 GHz and its main lobe can be directed at 30∘ from the vertical direction at 30 GHz. This antenna has a maximum gain of 15 dB and its main lobe can scan from 14∘ to 58∘ by tuning the frequency from 28 to 32 GHz.
相似文献A hybrid plasmonic modulator based on graphene on channel plasmonic polariton waveguide was proposed to overcome the difficulty in achieving high-speed modulation on the nanometric plasmonic waveguide platform. The extinction ratio and the figure of merit of the proposed modulator were analyzed in detail, and a tradeoff between them was found due to the intrinsic loss of the channel plasmonic polariton waveguide. And an optimized hybrid plasmonic modulator with large modulation bandwidth of 0.662 THz, low power consumption of 118.7 fJ/bit, and short device length of 7.680 μm was obtained theoretically. In addition, the proposed hybrid plasmonic modulator based on graphene on channel plasmonic polariton waveguide is easy to fabricate and provides a potential solution for the high-speed plasmonic modulator.
相似文献In this paper, the idea of square fractal geometry has been utilized to introduce a tunable wideband graphene-based perfect plasmonic absorber in the near-infrared region. It consists of a MgF2 layer and an array of gold squares fractal loaded on a graphene layer. In the designed absorber a single layer of graphene has been used instead of multilayered graphene structures. The structure is polarization-insensitive under normal incidence due to the geometric symmetry. The absorption and bandwidth of the structure are almost insensitive to the incident angle up to 15° and 45° for TE and TM polarizations, respectively. Moreover, by choosing appropriate structural parameters, the resonance wavelength of the desired plasmonic absorber can be controlled. The absorption of the introduced structure can be tuned by changing the chemical potential of the graphene. Therefore, the proposed fractal absorber can act as switch and inverter at λ = 1995 nm. Furthermore, the equivalent circuit model of the absorber has been derived to confirm the validity of the simulation results. The superiorities of our fractal absorber are wide full-width at half-maximum of 406 nm, multi-applicant, perfect absorption, and fabrication feasibility due to the simple structure with the maximum absorption tolerance error of 5.12%.
相似文献Although spiral plasmonic lens has been proposed as circular polarization analyzer, there is no such plasmonic nanostructure available for linear polarization. In the current work, we have designed nano-corral slits (NCS) plasmonic lens, which focuses the x- and y-polarized light into spatially distinguished plasmonic fields. We have calculated analytically and numerically the electric field intensity and phase of the emission from nano-corral slits plasmonic lens with different pitch lengths under various polarizations of the illumination. It has been shown that one can control the wave front of the output beam of these plasmonic lenses by manipulating the illumination of both circular and linear polarization. Our theoretical study in correlation with FDTD simulation has shown that NCS plasmonic lens with pitch length equal to λspp produces scalar vortex beam having optical complex fields with helical wave front and optical singularity at the center under circular polarization of light. When NCS lens (pitch = λspp) is illuminated with linearly polarized light, it exhibits binary distribution of phase with same electric field intensity around the center. However, with pitch length of 0.5λspp, NCS shows linear dichroism under linearly polarized illumination unlike spiral plasmonic lens (SPL) eliminating the use of circularly polarized light. Optical complex fields produced by these NCS plasmonic lenses may find applications for faster quantum computing, data storage, and telecommunications.
相似文献Actively tunable Fano resonance has obvious advantages in applications such as chemical or biological sensors, switches, modulators, and optical filters. In this paper, we studied theoretically the actively tunable Fano resonance in H-like metal-graphene hybrid nanostructures at visible and near-infrared wavelengths. We found that the absorption spectrum of H-like metal-graphene hybrid nanostructures has two resonance peaks, and the absorption spectrum has an obvious blue shift compared with that of the H-like metal nanostructures without graphene. The optical properties of different nanostructures are explained by the electric field distribution. Then, the dependence of the Fano resonance on the nanostructure parameters, refractive index of host materials, and graphene Fermi energy is studied. The wavelength and intensity of absorption spectrum can be manipulated by adjusting the structure parameters and host materials. In addition, the wavelength and intensity of absorption spectrum can be manipulated actively by changing the Fermi energy levels of graphene. This study provides a method for designing the actively tunable Fano resonance in H-like metal-graphene hybrid nanostructures.
相似文献In this work, a label-free and inexpensive method for the monitoring of water pollutants is demonstrated. We introduce a localized surface plasmon resonance (LSPR) based plasmonic capillary optical biosensor to detect microalgae cells. Here, the plasmonic capillary biosensor was prepared by decorating the inner walls of a glass capillary with gold nanoparticles that were employed for investigations. Since the gold nanoparticle has the potential to sense pollutants in water rapidly with high sensitivity and they are expected to perform a significant role in environmental monitoring. Our proposed plasmonic capillary sensor has a detection limit of 25 algal cells (Chlorella sp. CB4). Furthermore, the plasmonic capillary sensing platform significantly simplifies sensor fabrication and reduces the cost of the device. We believe that the presented plasmonic sensor could stand as a potential candidate for developing a cost-effective, label-free, and rapid sensing platform to detect microalgae pollutants present in the water at very low concentrations.
相似文献A plasmonic nanodevice in end-coupled sectorial-ring cavity waveguide is reported, and the spectral characteristic of the novel system is studied. It is built with sectorial-ring cavity resonator end-coupled to plasmonic waveguide, and this resonator is an oversize central angle (θ), alterable symmetry plane angle (ϕ), and fixed radius and gap, which has the advantages of forming split-ring-like, realizing asymmetrical cavity, and achieving spectral tunability and selectivity. The two-dimensional simulation indicates that the extra noninteger and traditional integer resonance modes are excited in the novel system, and the noninteger resonance modes are not achievable for the circular-ring cavity waveguide. It displays that these resonance modes of the novel system are drastically affected by changing the position of ϕ, which has different changes on maximum transmittances but is almost unchanged on resonance wavelengths. Importantly, the multiple resonance modes are highly sensitive to ϕ, and the proper modes are significantly enhanced, weakened, excited, or disappeared. It also displays that these resonance modes of the novel system are efficiently affected by changing the size of θ, which has similar and different influences on resonance wavelengths and maximum transmittances. This work shows that the method helps in designing accurately the transmission spectrum with prospective modes in nanophotonics, and the structure facilitates for realization of tunable and selective multichannel nanofilter or nanosensor in integration.
相似文献