A Transparent Metasurface Absorber/Emitter with High Solar Thermal Transfer Efficiency for Combined Solar/Thermal Conversion Application

Plasmonics - In this work, a transparent metasurface absorber/emitter (TMAE) is proposed based on the transparent metal of indium tin oxide (ITO) and substrate layer consisting of (ZnS). This...     

Solar and Thermal Radiation-Modulation Materials for Building Applications

Regulation of solar and thermal radiation of building envelope shows huge energy-saving potentials. Existing reviews mainly focus on the materials with fixed solar and thermal optical properties. Although there are reviews reporting the materials with modulated optical properties (e.g., radiative cooling materials with modulating thermal emissivity while maintaining high solar reflectance), they merely focus on either solar or thermal radiation modulation, which can provide limited or even negative building energy savings and thus may mislead the researchers to design low energy-efficient materials in practice. To help gain a holistic understanding of the state-of-the-art solar and thermal radiation-modulation materials (STRMMs) and guide researchers to develop more effective STRMMs for maximum building energy savings, here the STRMMs are reviewed in three categories, solar radiation modulation, thermal radiation modulation, and synergetic solar and thermal radiation modulation. In the former two categories, only single solar or thermal optical property is modulated while in the third category both solar and thermal optical properties are modulated. For STRMMs in each category, their working principles, representative examples, potential applications and future perspectives are compared and elaborated.     

Solid‐State Solar Thermal Fuels for Heat Release Applications

Closed cycle systems offer an opportunity for solar energy harvesting and storage all within the same material. Photon energy is stored within the chemical conformations of molecules and is retrieved by a triggered release in the form of heat. Until now, such solar thermal fuels (STFs) have been largely unavailable in the solid‐state, which would enable them to be utilized for a multitude of applications. A polymer STF storage platform is synthesized employing STFs in the solid‐state. This approach enables uniform films capable of appreciable heat storage of up to 30 Wh kg^?1 and that can withstand temperature of up to 180 °C. For the first time a macroscopic energy release is demonstrated using spatial infrared heat maps with up to a 10 °C temperature change. These findings pave the way for developing highly efficient and high energy density STFs for applications in the solid‐state.     

Monitoring Thermal Annealing of Perovskite Solar Cells with In Situ Photoluminescence

Layer deposition of organometal halide perovskites for solar cells usually involves tedious experimentation to establish the optimum processing conditions. Important parameters are the time and temperature of thermal annealing. Here, it is demonstrated that in situ photoluminescence allows to determine the optimal annealing procedure without fabricating complete solar cells. A deposition method is used in which dense layers of perovskite crystals are formed within seconds in ambient air by hot casting a mixture of lead acetate, lead chloride, and methylammonium iodide. The as‐cast perovskite layers are highly luminescent because charge carriers are unable to reach the charge extraction layers that quench the photoluminescence. Thermal annealing enhances charge transport and quenches the photoluminescence, but deteriorates the photovoltaic performance via decomposition of the perovskite if applied for a too long time. It is demonstrated that the optimal annealing time coincides with the time required for the in situ measured photoluminescence intensity to reach its baseline value for annealing temperatures in the range of 80–100 °C. This results in efficient (>14%) perovskite solar cells and shows that in situ photoluminescence is a simple but powerful tool for in‐line quality monitoring of perovskite films.     

Making Record-efficiency SnS Solar Cells by Thermal Evaporation and Atomic Layer Deposition

Tin sulfide (SnS) is a candidate absorber material for Earth-abundant, non-toxic solar cells. SnS offers easy phase control and rapid growth by congruent thermal evaporation, and it absorbs visible light strongly. However, for a long time the record power conversion efficiency of SnS solar cells remained below 2%. Recently we demonstrated new certified record efficiencies of 4.36% using SnS deposited by atomic layer deposition, and 3.88% using thermal evaporation. Here the fabrication procedure for these record solar cells is described, and the statistical distribution of the fabrication process is reported. The standard deviation of efficiency measured on a single substrate is typically over 0.5%. All steps including substrate selection and cleaning, Mo sputtering for the rear contact (cathode), SnS deposition, annealing, surface passivation, Zn(O,S) buffer layer selection and deposition, transparent conductor (anode) deposition, and metallization are described. On each substrate we fabricate 11 individual devices, each with active area 0.25 cm². Further, a system for high throughput measurements of current-voltage curves under simulated solar light, and external quantum efficiency measurement with variable light bias is described. With this system we are able to measure full data sets on all 11 devices in an automated manner and in minimal time. These results illustrate the value of studying large sample sets, rather than focusing narrowly on the highest performing devices. Large data sets help us to distinguish and remedy individual loss mechanisms affecting our devices.     

Polymer/Small Molecule/Fullerene Based Ternary Solar Cells

Polymer/small molecule/fullerene based ternary solar cells have made great progress and have attracted considerable attention in recent years. The addition of small molecules can effectively compensate for the disadvantages of polymer solar cells, such as increasing the light‐harvesting ability, providing cascade energy levels, and tuning the morphology. Thus, polymer/small molecule/fullerene based ternary solar cells are promising candidates to obtain further improvements in photovoltaic performance for organic solar cells. This article summarizes the developments of ternary solar cells with small molecules as third components, and represents the possible photo‐physics process in the ternary blends. In addition, the challenges and perspectives for ternary solar cells are discussed.     

Flexible Solar Thermal Fuel Devices: Composites of Fabric and a Photoliquefiable Azobenzene Derivative

Controllable storage and release of solar energy has always been a highlighted scientific issue for its benefit of mankind. Solar thermal fuels (STFs) supply a closed cycle and renewable energy‐storage strategy by transforming solar energy into chemical energy stored in the conformation of molecular isomers, such as cis/trans‐azobenzene, and releasing it as heat under various stimuli. Although the potential high energy density of the STFs which are based on the hybrids of azobenzene derivatives and carbon nanomaterials has been reported the solvent‐assistant charging hinders their practicability. In this study, a solid‐state STF device is designed and fabricated by compositing one photoliquefiable azobenzene (PLAZ) derivative with a flexible fabric template. The photoinduced phase transition of the PLAZ derivative enables the charging of the flexible STFs to be totally solvent‐free. Interestingly, the energy‐storage capacity (energy density ≈201 J g^?1) of flexible PLAZ STFs has been improved by the soft fabric template. The exothermic situation is monitored with one infrared camera, which shows 4 °C temperature difference between charged and discharged samples under blue light stimulus. The flexible STFs are may be used in practice as heating equipment.     

Thermal preference in Drosophila

Environmental temperature strongly affects physiology of ectotherms. Small ectotherms, like Drosophila, cannot endogenously regulate body temperature so must rely on behavior to maintain body temperature within a physiologically permissive range. Here we review what is known about Drosophila thermal preference. Work on thermal behavior in this group is particularly exciting because it provides the opportunity to connect genes to neuromolecular mechanisms to behavior to fitness in the wild.     

Efficient Nanostructured TiO2/SnS Heterojunction Solar Cells

Tin sulfide (SnS) is one of the most promising solar cell materials, as it is abundant, environment friendly, available at low cost, and offers long‐term stability. However, the highest efficiency of the SnS solar cell reported so far remains at 4.36% even using the expensive atomic layer deposition process. This study reports on the fabrication of SnS solar cells by a solution process that employs rapid thermal treatment for few seconds under Ar gas flow after spin‐coating a precursor solution of SnCl₂ and thiourea dissolved in dimethylformamide onto a nanostructured thin TiO₂ electrode. The best‐performing cell exhibits power conversion efficiency (PCE) of 3.8% under 1 sun radiation conditions (AM1.5G). Moreover, secondary treatment using SnCl₂ results in a significant improvement of 4.8% in PCE, which is one of the highest efficiencies among SnS‐based solar cells, especially with TiO₂ electrodes. The thin film properties of SnS after SnCl₂ secondary treatment are analyzed using grazing‐incidence wide‐angle X‐ray scattering, and high‐resolution transmittance electron microscopy.     

Specific Growth Rate Determines the Sensitivity of Escherichia coli to Thermal, UVA, and Solar Disinfection

Knowledge about the sensitivity of the test organism is essential for the evaluation of any disinfection method. In this work we show that sensitivity of Escherichia coli MG1655 to three physical stresses (mild heat, UVA light, and sunlight) that are relevant in the disinfection of drinking water with solar radiation is determined by the specific growth rate of the culture. Batch- and chemostat-cultivated cells from cultures with similar specific growth rates showed similar stress sensitivities. Generally, fast-growing cells were more sensitive to the stresses than slow-growing cells. For example, slow-growing chemostat-cultivated cells (D = 0.08 h⁻¹) and stationary-phase bacteria from batch culture that were exposed to mild heat had very similar T₉₀ (time until 90% of the population is inactivated) values (T_{90, chemostat} = 2.66 h; T_{90, batch} = 2.62 h), whereas T₉₀ for cells growing at a μ of 0.9 h⁻¹ was 0.2 h. We present evidence that the stress sensitivity of E. coli is correlated with the intracellular level of the alternative sigma factor RpoS. This is also supported by the fact that E. coli rpoS mutant cells were more stress sensitive than the parent strain by factors of 4.9 (mild heat), 5.3 (UVA light), and 4.1 (sunlight). Furthermore, modeling of inactivation curves with GInaFiT revealed that the shape of inactivation curves changed depending on the specific growth rate. Inactivation curves of cells from fast-growing cultures (μ = 1.0 h⁻¹) that were irradiated with UVA light showed a tailing effect, while for slow-growing cultures (μ = 0.3 h⁻¹), inactivation curves with shoulders were obtained. Our findings emphasize the need for accurate reporting of specific growth rates and detailed culture conditions in disinfection studies to allow comparison of data from different studies and laboratories and sound interpretation of the data obtained.     

Shape Conformal and Thermal Insulative Organic Solar Absorber Sponge for Photothermal Water Evaporation and Thermoelectric Power Generation

Solar‐driven interfacial vaporization by localizing solar‐thermal energy conversion to the air–water interface has attracted tremendous attention due to its high conversion efficiency for water purification, desalination, energy generation, etc. However, ineffective integration of hybrid solar thermal devices and poor material compliance undermine extensive solar energy exploitation and practical outdoor use. Herein, a 3D organic bucky sponge that has a combination of desired chemical and physical properties, i.e., broadband light absorbing, heat insulative, and shape‐conforming abilities that render efficient photothermic vaporization and energy generation with improved operational durability is reported. The highly compressible and readily reconfigurable solar absorber sponge not only places less constraints on footprint and shape defined fabrication process but more importantly remarkably improves the solar‐to‐vapor conversion efficiency. Notably, synergetic coupling of solar‐steam and solar‐electricity technologies is realized without trade‐offs, highlighting the practical consideration toward more impactful solar heat exploitation. Such solar distillation and low‐grade heat‐to‐electricity generation functions can provide potential opportunities for fresh water and electricity supply in off‐grid or remote areas.     

Understanding the Role of Thermal Processing in High Performance Solution Processed Small Molecule Bulk Heterojunction Solar Cells

Two similar structural versions of a molecular donor, in which two terminal hexyl‐substituted bithiophene units are connected to a central dithienosilole (DTS) through electron deficient thiadiazolopyridine (PT) units, and which differ only in the position of pyridyl N‐atoms, were explored to study the interplay of crystallization and vertical phase segregation as a result of annealing. The donor materials exhibit greatly contrasting photovoltaic performance despite similarity in molecule structure. The difference in position of the pyridal N‐atom which points away (distal configuration; compound 1) or towards (proximal configuration; compound 2) from the DTS core, modifies the aggregation/molecular packing in the solid state, resulting in differences in the phase segregation and formation of crystalline domains. A systematic study of the temperature dependence of photovoltaic performance reveals a parameter trade‐off: as annealing temperature increases, higher donor crystallinity and ordering results, but increased donor segregation near the surface or decrease in electrode selectivity also occurs, resulting in increased interfacial recombination and hence reduction in open‐circuit voltage (V_oc). The higher crystalline nature of 2 is found to have a higher impact on cell performance despite a competing undesired effect at the donor/aluminum cathode interface, contributing to its superior performance to 1 when blended with [6,6]phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM). Molecule 2 exhibits a performance increase of a factor of two after thermal annealing at 100 °C, achieving a power conversion efficiency of 5.7%.     

Four‐Terminal Perovskite/Silicon Multijunction Solar Modules

Multijunction solar cells employing perovskite and crystalline‐silicon (c‐Si) light absorbers bear the exciting potential to surpass the efficiency limit of market‐leading single‐junction c‐Si solar cells. However, scaling up this technology and maintaining high efficiency over large areas are challenging as evidenced by the small‐area perovskite/c‐Si multijunction solar cells reported so far. In this work, a scalable four‐terminal multijunction solar module design employing a 4 cm² semitransparent methylammonium lead triiodide perovskite solar module stacked on top of an interdigitated back contact c‐Si solar cell of identical area is demonstrated. With a combination of optimized transparent electrodes and efficient module design, the perovskite/c‐Si multijunction solar modules exhibit power conversion efficiencies of 22.6% on 0.13 cm² and 20.2% on 4 cm² aperture area. Furthermore, a detailed optoelectronic loss analysis along with strategies to enhance the performance is discussed.