cDNA文库固相构建法

本文介绍一种cDNA文库的固相构建法。文库构建过程cDNA的合成和修饰全部在固相介质—磁珠上完成,简便、迅速、文库质量高,能满足不同目的的cDNA文库构建,是一种值得借鉴和应用的好方法。     

The development of a novel vector for construction of a full-length cDNA library

A new original vector pEM-(dT)₄₀(f+) has been prepared. It can be used for cDNA library construction from polyadenylated mRNA, isolated from various sources. The vector pGEM-(dT)₄₀f(+) is initially transformed into single stranded and then into a linear form and its (dT)₄₀ tail at the 3′-end is used as the vector-primer for synthesis of the first strand cDNA. The use of a synthetic oligonucleotide complementary to the vector and recombinant DNA results in vector circularization and synthesis of the second strand cDNA. This approach has the following advantages: (1) it significantly simplifies cDNA library construction, which includes three steps; (2) full-length cDNA library construction is achieved by adding a (dC)_n homopolymer tail to the 5′end; (3) preparation of a clone library requires a few milligrams of total RNA; (4) it is possible to obtain cDNA clones up to 10 kbp; (5) it does not require PCR reaction (which can induce artifact mutations in cDNA sequences); (6) this approach does not employ restrictase treatment and chimeric cDNA products are not formed.     

一种改进的cDNA文库固相构建法

本文介绍一种新的cDNA文库固相构建法。文库构建过程中,cDNA的合成和修饰全部在固相介质――磁珠上完成,简便、迅速、文库质量高,能满足不同目的的cDNA文库构建,是一种值得借鉴和应用的好方法。 Abstract：A method for cDNA library construction was introduced.All enzymatic steps of library synthesis were performed on a solid support-magnetic beads.Therefore it combines fast speed and convenient with high quality library,making it ideally suited for most purposes.It is a good method and worth learning and utilization.     

毛竹笋全长cDNA文库构建

Gateway技术构建cDNA文库,利用了λ噬菌体的位点特异性重组,避免使用限制性内酶切割cDNA,能够解决常规方法构建cDNA文库的技术缺陷。应用Gateway技术构建毛竹笋cDNA文库,经检测cDNA入门文库的滴度达到1.7×106cfu/mL,文库总容量为8.5×106cfu,平均插入片段在1.0 kb以上。毛竹笋文库的构建为进一步克隆毛竹纤维化分子机理打下了基础。     

Construction of a Plant Transformation-ready Expression cDNA Library for Thellungiella halophila Using Recombination Cloning

Salt cress （Thellungiella halophila）, a close relative of the model plant Arabidopsis thaliana L., is an extremophile that is adapted to harsh saline environments. To mine salt-tolerance genes from this species, we constructed an entry cDNA library from the salt cress plant treated with salt-stress by using a modified cDNA synthesis and an improved recombinationassisted cDNA library construction method that is completely free of manipulations involving restriction enzymes and DNA ligase. This cDNA library construction procedure is significantly simplified and the quality of the cDNA library is improved. This entry cDNA library was subsequently shuttled into the destination binary vector pCB406 designed for plant transformation and expression via recombination-assisted cloning. The library is plant transformation ready and is used to transform Arabidopsis on a large scale in order to create a large collection of transgenic lines for functional gene mining.     

几种全长cDNA文库构建方法比较

全长cDNA文库是高效、大规模获得基因全序列信息的一条有效途径,尤其是对基因组庞大,近期内尚不能进行全基因组测序的生物来说,是一条开展功能基因组研究的重要途径。本文对几种全长cDNA文库的构建方法进行了概述,针对各种方法的原理及优缺点做了分析、比较,并结合本实验室的结果,重点介绍了Cap-trapper法在小麦全长cDNA文库中的应用及文库中全长基因比例判定方法。     

Construction of a Plant Transformation-ready Expression cDNA Library for Thellungiella halophila Using Recombination Cloning

Salt cress(Thellungiella halophila),a close relative of the model plant Arabidopsis thaliana L.,is an extremophile that isadapted to harsh saline environments.To mine salt-tolerance genes from this species,we constructed an entry cDNA libraryfrom the salt cress plant treated with salt-stress by using a modified cDNA synthesis and an improved recombination-assisted cDNA library construction method that is completely free of manipulations involving restriction enzymes andDNA ligase.This cDNA library construction procedure is significantly simplified and the quality of the cDNA library isimproved.This entry cDNA library was subsequently shuttled into the destination binary vector pCB406 designed for planttransformation and expression via recombination-assisted cloning.The library is plant transformation ready and is used totransform Arabidopsis on a large scale in order to create a large collection of transgenic lines for functional gene mining.     

Unbiased Deep Sequencing of RNA Viruses from Clinical Samples

Here we outline a next-generation RNA sequencing protocol that enables de novo assemblies and intra-host variant calls of viral genomes collected from clinical and biological sources. The method is unbiased and universal; it uses random primers for cDNA synthesis and requires no prior knowledge of the viral sequence content. Before library construction, selective RNase H-based digestion is used to deplete unwanted RNA — including poly(rA) carrier and ribosomal RNA — from the viral RNA sample. Selective depletion improves both the data quality and the number of unique reads in viral RNA sequencing libraries. Moreover, a transposase-based ''tagmentation'' step is used in the protocol as it reduces overall library construction time. The protocol has enabled rapid deep sequencing of over 600 Lassa and Ebola virus samples-including collections from both blood and tissue isolates-and is broadly applicable to other microbial genomics studies.     

A procedure for rapid isolation of cloned cDNA inserts using the polymerase chain reaction technique

A reproducible and rapid procedure for isolation of cloned cDNA insert from a lambda gt11 cDNA library is described. The procedure relies on the polymerase chain reaction method using forward and reverse primers for lambda gt11, followed by isolation of the cloned cDNA insert by a rapid technique. The procedure should also be applicable to isolation of cDNA inserts cloned in other vectors such as lambda gt10.     

Optimization of subtractive hybridization in construction of subtractive cDNA libraries

The efficiency of subtraction, integrity of residual single-stranded cDNA, and efficient recovery of nanogram quantities of double-stranded cDNA are the three most important factors affecting quality of subtractive hybridization reactions prior to subtractive cDNA library construction. Techniques for efficient isolation of single-stranded cDNA, after subtraction, have greatly improved from early protocols based on hydroxylapatite chromatography to phenol-chloroform extraction of biotin-streptavidin-crosslinked polynucleotides or oligo(dA)-cellulose affinity chromatography. Factors affecting mRNA stability at the hybridization step, however, also have consequences that directly affect the complexity of the library and the length of cDNAs recovered. We have optimized the subtractive hybridization step in subtractive cDNA library construction to ensure that single-stranded cDNAs survive hybridization as near to full length as possible. These improvements have enabled successful construction of subtractive cDNA libraries from the nanogram quantities of single-stranded cDNA remaining after extensive liquid hybridization to high calculated C_ot values.     

从cDNA文库中筛选分析阳性克隆的简便方法

cDNA文库中阳性克隆的传统筛选分析法既费时又费力.利用微波炉加热的方法,简化了原位杂交中噬菌斑裂解、DNA变性与固定的程序;进一步运用PCR扩增技术,特异扩增克隆载体中插入的cDNA片段,加快了阳性克隆分析的进程.     

噬菌体cDNA文库筛选方法的改良

cDNA文库的构建和简便、快速的筛选是获得全长基因的重要途径,基于PCR的筛库方法具有快捷、灵敏的特点。研究改进了基于PCR的噬菌体cDNA文库筛选方法,用液体分装的方法,替代了文库筛选的关键步骤——涂板分区,省去了噬菌体文库铺平板、浸染、培养、划块洗脱的操作过程,使筛库的工作量减少,进一步提高了筛选速度和获得阳性克隆的效率。     

A proteomic approach to identify phosphoproteins encoded by cDNA libraries

We report a method for large-scale rapid analysis of phosphoproteins in tissues or cells by combining immobilized metal affinity chromatography (IMAC) with phage display cDNA library screening. We expressed a testis cDNA library as fusion proteins on phage and, using IMAC, enriched for sequences encoding phosphoproteins. Selected clones were polymerase chain reaction amplified and sequenced. The majority of the clones sequenced (80%) encoded known proteins previously identified as phosphoproteins. Immunoblotting with phosphotyrosine antibodies confirmed that some of the selected sequences encoded tyrosine phosphorylated proteins when expressed on phage. An advantage of this method is the rapid identification of phosphoproteins encoded by a cDNA library, which can identify proteins that are potentially phosphorylated in vivo. When this method is combined with limited enzymatic digestion and tandem mass spectrometric techniques, the specific phosphorylation site in a protein can be identified. This technique can be used in proteomics studies to effectively detect phosphorylated proteins and avoid time-consuming and expensive peptide sequencing.     

A simple, effective method for the construction of subtracted cDNA libraries

A simple method is described for the construction of subtracted cDNA libraries. The technique was used to create a human pancreatic tumor cDNA library that was screened using either hybridization with cDNA probes or antibodies. cDNA from a well-differentiated tumor cell line (CD-11) was subtracted against RNA from an undifferentiated tumor cell line (Panc-1). The subtracted cDNA was purified from RNA-cDNA hybrids by oligo-dA cellulose affinity chromatography. Single-stranded subtracted cDNA was used as a template for random primed second-strand synthesis using the Klenow's fragment of DNA polymerase. After ligation with Eco R1 adapters, cDNA was inserted into lambda gt11. A library of 140,000 primary pfu was obtained that contained 92% recombinants. A small portion of this library (40,000 pfu) was subjected to probe screening with a mucin cDNA probe known to be differentially expressed by CD-11 cells. The ratio of mucin cDNA clones to actin cDNA clones was increased by greater than 300-fold in the subtracted cDNA library compared to a standard cDNA library from the same cell line. The absolute number of mucin cDNA clones per 40,000 pfu was also increased 32-fold in the subtracted library. Pancreatic tumor mucin cDNAs were also identified in the subtracted library by antibody screening. The subtraction procedure yielded a 50-fold enrichment in differentially expressed cDNA detected by antibodies, compared to a nonsubtracted library from the same cell line.     

SMART amplification combined with cDNA size fractionation in order to obtain large full-length clones

Background  

cDNA libraries are widely used to identify genes and splice variants, and as a physical resource for full-length clones. Conventionally-generated cDNA libraries contain a high percentage of 5'-truncated clones. Current library construction methods that enrich for full-length mRNA are laborious, and involve several enzymatic steps performed on mRNA, which renders them sensitive to RNA degradation. The SMART technique for full-length enrichment is robust but results in limited cDNA insert size of the library.     

Detection of large cDNA inserts within crude lambda gt11 lysates: a rapid and sensitive method

A method is presented for the isolation of bacteriophage lambda DNA and the rapid identification of large cDNA inserts within crude phage lysates. The primary screening of a lambda gt11 cDNA library with a 32P-radiolabeled cDNA probe yielded 21 putative positive clones. A phage "spot-blot" analysis was employed to quickly screen these potential recombinants. This eliminated 9 of the 21 clones as the result of false positive signals. The remaining 12 recombinant phage were amplified on agarose-based media, and phage DNA was isolated using a modified plate lysate procedure. The DNA thus obtained from these crude lysates could be easily digested with EcoRI and examined by Southern blot analysis. The resulting blot was hybridized with the same cDNA probe used in the initial screening of the library. Thus, two clones harboring the longest cDNA insert were identified from a mixed phage population and were subsequently plaque purified. The procedure is rapid, sensitive, reproducible, inexpensive and allows the processing of several clones at once without sacrificing the quality or yields of the DNA preparation. Furthermore, the method obviates the need for plaque purifying all the positives obtained from the initial screening of a cDNA library.     

基因组研究中全长cDNA克隆的策略

全长cDNA的克隆是目前人类基因组研究中的一个重要方面,与大规模基因组测序相比较,cDNA测序克隆用相对较少费用获得更多的功能基因信息,故也是符合我国国情的基因组研究的主要方向。如何更加高效地获得新的全长cDNA,本文结合作者自己工作中的经验,对从全长文库的建立到全长cDNA的测序及克隆方法作了较为详细的介绍。     

大豆抗病基因同源序列的克隆与分析

已克隆的植物抗病基因序列存在一些相对保守的结构区域.利用根据核苷酸结合位点(NBS)结构域扩增所获得的大豆抗病基因同源片段为混合探针,进行大豆cDNA文库筛选.通过筛库和5'RACE-PCR扩增后,获得一全长基因KR3.KR3的长度为2353 bp,编码636个氨基酸.KR3蛋白在结构上与烟草抗花叶病毒N基因蛋白有较高的同源性,具有Toll/白细胞介素-1受体(TIR)、NBS等抗病基因的分子特征.Southern杂交显示KR3在基因组中为低拷贝;RT-PCR分析表明,该基因的表达受外源水杨酸的诱导.     

大豆抗病基因同源序列的克隆与分析

已克隆的植物抗病基因序列存在一些相对保守的结构区域。利用根据核苷酸结合位点(NBS)结构域扩增所获得的大豆抗病基因同源片段为混合探针,进行大豆cDNA文库筛选。通过筛库和5′RAcE-PcR扩增后,获得一全长基因KR3。KR3的长度为2353 bp,编码636个氨基酸。KR3蛋白在结构上与烟草抗花叶病毒N基因蛋白有较高的同源性,具有Toll／白细胞介素-1受体(TIR)、NBS等抗病基因的分了特征。Southern 杂交显KR3在基因组中为低拷贝：RT-PCR分析表明,该基因的表达受外源水杨酸的诱导。