Ultrasound mediated enzymatic hydrolysis of cellulose and carboxymethyl cellulose

A recombinant Trichoderma reesei cellulase was used for the ultrasound‐mediated hydrolysis of soluble carboxymethyl cellulose (CMC) and insoluble cellulose of various particle sizes. The hydrolysis was carried out at low intensity sonication (2.4–11.8 W cm^?2 sonication power at the tip of the sonotrode) using 10, 20, and 40% duty cycles. [A duty cycle of 10%, for example, was obtained by sonicating for 1 s followed by a rest period (no sonication) of 9 s.] The reaction pH and temperature were always 4.8 and 50°C, respectively. In all cases, sonication enhanced the rate of hydrolysis relative to nonsonicated controls. The hydrolysis of CMC was characterized by Michaelis‐Menten kinetics. The Michaelis‐Menten parameter of the maximum reaction rate V_max was enhanced by sonication relative to controls, but the value of the saturation constant K_m was reduced. The optimal sonication conditions were found to be a 10% duty cycle and a power intensity of 11.8 W cm^?2. Under these conditions, the maximum rate of hydrolysis of soluble CMC was nearly double relative to control. In the hydrolysis of cellulose, an increasing particle size reduced the rate of hydrolysis. At any fixed particle size, sonication at a 10% duty cycle and 11.8 W cm^?2 power intensity improved the rate of hydrolysis relative to control. Under the above mentioned optimal sonication conditions, the enzyme lost about 20% of its initial activity in 20 min. Sonication was useful in accelerating the enzyme catalyzed saccharification of cellulose. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1448–1457, 2013     

Modification of carboxymethyl cellulose through oxidation

The periodate oxidation reaction of carboxymethyl cellulose involve the primary and secondary hydroxyl groups of the pyranose ring. The reaction is accompanied by the opening of the pyranose ring and resulting product is dialdehyde carboxymethyl cellulose along with some hydrated forms. In this process the glucosidic bond becomes weaker; the formation of carboxyl groups induces a depolymerization, thus reducing the polymerization degree and the physical and mechanical strength of the material. The reaction has been has been carried out at pH 3.5, temperature 45 °C for 0.5-4 h.     

Homogenous reactions of cellulose from different natural sources

Two different homogenous reactions on bacterial cellulose (BC), kenaf fiber (KF) and microcrystalline cellulose (MC) were performed to monitor their chemical reactivity. The first reaction was selective oxidation of the primary hydroxyl group with sodium chlorite in the presence of catalytic amount of sodium chloride. While, the second was the formation of triester hypoiodous cellulose using potassium iodate and potassium iodide. The chemical structures of these derivatives were investigated using FT-IR and solid state ¹³C NMR spectroscopies. The BC fibrils required the shortest time among these cellulose samples for both reactions, whereas the viscosity values of BC after iodination and oxidation have the best values compared to KF and MC. FT-IR results show the absence of the hydroxy group of BC and a weak absorption band in both KF and MC. On the other hand, the crystallinity index (CI) of BC is higher than those of both KF and MC. FT-IR spectra of the oxidized different cellulose samples, confirmed the presence of a strong absorption band at around 1590 cm⁻¹ that attributed to vibration band of carbonyl group of carboxylic moiety. Moreover, in the ¹³C NMR spectrum of oxidized cellulose, the lack of signal at 62 ppm and the appearance of signal at 171 ppm indicated that the primary alcohol group is completely oxidized to carboxylic acid. These results showed that BC had a higher reactivity than other samples due to its great purity and low degree of polymerization.     

细菌纤维素的研究进展

细菌纤维素是由醋酸杆菌属、根瘤菌属、土壤杆菌属、八叠球菌属等的某些细菌在一定条件下产生的,其中最有代表性的细菌是木醋杆菌。与传统植物纤维素相比,细菌纤维素具有很高的化学纯度。主要介绍细菌纤维素性质、生物合成的方法及其在食品工业、造纸工业和作为一种生物材料在医学工程等方面的应用。     

The three-dimensional morphology of aggregates of native cotton cellulose microfibrils

The three-dimensional morphology of native bacterial cellulose is confirmed by scanning electron microscopy. In addition, it is shown by scanning electron microscopy, and transmission electron microscopy with positive staining by phosphotungstic acid ions that aggregates of microfibrils of native cotton cellulose have a similar structure. The results are consistent with previous reports on microfibrils of algal cellulose. These observations exclude a simple spinneret process as a mechanism of formation of the microfibrils of these sources of cellulose.     

Preparation of cellulose films from solution of bacterial cellulose in NMMO

Bacterial cellulose (BC) was dissolved in N-methylmorpholine N-oxide (NMMO) to prepare regenerated BC films (RBC) with phase inversion. The solubility of BC, supermolecule on structure, morphology, thermal and physical properties of the films were investigated by Fourier transform infrared spectroscopy (FT-IR), solid-state cross polarization/magic angle spinning ¹³C nuclear magnetic resonance (CP/MAS ¹³C NMR), wide-angle X-ray diffraction (WAXD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The investigation suggested BC was dissolved completely in NMMO. From the C₆ signal shifts to the amorphous area, the crystallinity of materials decreased from 79.20% to 38.17%, and the transformation from cellulose I to II occurred. It was also found that the banded structure of the native materials was replaced by homogeneous and densified sections, so RBC films had better mechanical and barrier properties, and do thermal stability was similar to that of the native BC.     

Endosidin20-1 is more potent than endosidin20 in inhibiting plant cellulose biosynthesis and molecular docking analysis of cellulose biosynthesis inhibitors on modeled cellulose synthase structure

Endosidin20 (ES20) is a recently identified cellulose biosynthesis inhibitor (CBI) that targets the catalytic site of plant cellulose synthase (CESA). Here, we screened over 600 ES20 analogs and identified nine active analogs named ES20-1 to ES20-9. Among these, endosidin20-1 (ES20-1) had stronger inhibitory effects on plant growth and cellulose biosynthesis than ES20. At the biochemical level, we demonstrated that ES20-1, like ES20, directly interacts with CESA6. At the cellular level, this molecule, like ES20, induced the accumulation of cellulose synthase complexes at the Golgi apparatus and inhibited their secretion to the plasma membrane. Like ES20, ES20-1 likely targets the catalytic site of CESA. However, through molecular docking analysis using a modeled structure of full-length CESA6, we found that both ES20 and ES20-1 might have another target site at the transmembrane regions of CESA6. Besides ES20, other CBIs such as isoxaben, C17, and flupoxam are widely used tools to dissect the mechanism of cellulose biosynthesis and are also valuable resources for the development of herbicides. Here, based on mutant genetic analysis and molecular docking analysis, we have identified the potential target sites of these CBIs on a modeled CESA structure. Some bacteria also produce cellulose, and both ES20 and ES20-1 inhibited bacterial cellulose biosynthesis. Therefore, we conclude that ES20-1 is a more potent analog of ES20 that inhibits intrinsic cellulose biosynthesis in plants, and both ES20 and ES20-1 show an inhibitory effect on bacterial growth and cellulose synthesis, making them excellent tools for exploring the mechanisms of cellulose biosynthesis across kingdoms.     

Cleavage of cellulose by a CBM33 protein

Bacterial proteins categorized as family 33 carbohydrate-binding modules (CBM33) were recently shown to cleave crystalline chitin, using a mechanism that involves hydrolysis and oxidation. We show here that some members of the CBM33 family cleave crystalline cellulose as demonstrated by chromatographic and mass spectrometric analyses of soluble products released from Avicel or filter paper on incubation with CelS2, a CBM33-containing protein from Streptomyces coelicolor A3(2). These enzymes act synergistically with cellulases and may thus become important tools for efficient conversion of lignocellulosic biomass. Fungal proteins classified as glycoside hydrolase family 61 that are known to act synergistically with cellulases are likely to use a similar mechanism.     

Biodegradable and biocompatible polyampholyte microgels derived from chitosan, carboxymethyl cellulose and modified methyl cellulose

Two biocompatible and biodegradable polyampholyte microgels, namely chitosan-carboxymethyl cellulose (CS-CMC) and chitosan-modified methyl cellulose (CS-ModMC) were synthesized by an inverse microemulsion technique. The CS-CMC microgel system was pH-responsive while the CS-ModMC system possessed both pH and thermo-responsive properties. For CS-CMC system, the number of -OCH₂COOH and -NH₂ groups was determined to be 1.5 and 1.1 meq/g of microgel, respectively. In the pH range of 4-9, the zeta potential values varied from +10 to −40 mV, while the hydrodynamic radius varied from 160 nm in the swollen state (acidic and basic pH) to 110 nm in the “collapse” state (neutral pH). Furthermore, TEM micrographs confirmed the swelling/deswelling behaviour of CS-CMC microgel particles at acidic, neutral and basic conditions. For CS-ModMC system, the number of -OCH₂COOH and -NH₂ groups was determined to be 0.8 and 0.6 meq/g microgel, respectively. In the pH range of 4-9, the surface charge on the microgels varied from +25 to −60 mV and the hydrodynamic radii were 190 nm at low pH, 80 nm at neutral pH, to 120 nm at a high pH. In vitro drug release studies confirmed that CS-CMC microgels could encapsulate and release a model drug, thus they could potentially be used as biocompatible and biodegradable drug carriers.     

L-谷氨酸氧化酶与CBD的融合表达及其在微晶纤维素上固定化分析

酶的固定化作为一种重要的技术,已在生物催化领域得到了广泛的应用。现将来源于普拉特链霉菌3304(Streptomyces platensis NTU3304)产生的胞外L-谷氨酸氧化酶(L-glutamate oxidase,Gox)基因gox融合到来源于粪碱纤维单胞菌Cellulomonas fimi的纤维素结合域(CBDcex)的基因上,构建表达载体p ETM10-Gox-CBD,并在大肠杆菌中表达。通过蛋白纯化获得融合蛋白,并命名为Gox-CBD。利用CBD对微晶纤维素特异性吸附的特性将其固定在微晶纤维素上,并对固定化酶的制备条件、结合量、酶学性质及其微晶纤维素结合稳定性等进行了研究。在4℃条件下结合约1 h,融合蛋白Gox-CBD结合在纤维素上的结合量即可达到9.0 mg/g。通过对重组型、融合表达游离的以及固定化在微晶纤维素上的谷氨酸氧化酶的酶学性质进行比较发现,固定化酶的比酶活有所降低;但固定化酶的热稳定性相对于游离酶有了很大的提高,在60℃孵育30 min后还保留有约70%的活性,而游离的重组Gox在相同条件下几乎完全失去活性。当固定化结合蛋白在p H10或者盐浓度5 mmol/L的Na Cl条件下可以牢固结合。并且可以通过一步纯化方法固定化融合蛋白Gox-CBD于微晶纤维素上。因此,L-谷氨酸氧化酶与纤维素结合域融合表达的研究为蛋白的纯化及酶的固定化提供了一种新策略。     

细菌纤维素合酶的基本特性及作用机理

细菌纤维素是一种天然的生物质高分子聚合物。相较于植物纤维素,其具有更高的纯度和优异的力学性能。有望作为一种绿色的新型高分子材料被广泛应用。细菌纤维素合酶作为合成细菌纤维素的关键酶,其主导细菌纤维素的合成过程。因此,对其合成机理的探索有助于实现细菌纤维素大量生产和广泛应用。本文从细菌纤维素合酶的基本特性出发,综述了菌种筛选、提升产量和合酶的细胞定位等内容;围绕纤维素合酶的作用机理阐述了体外合成方法的影响因素,以及利用该方法探究各亚基相关作用的现状。以此探究细菌纤维素合酶的合成机制,并提出了当前研究中存在的问题。同时,展望了该领域未来的研究方向,以期通过对合成机理的探讨为细菌纤维素的大规模应用提供理论基础。     

Effect of surfactants on cellulose hydrolysis

The effect of surfactants on the heterogeneous enzymatic hydrolysis of Sigmacell 100 cellulose and of steam-exploded wood was studied. Certain biosurfactants (sophorolipid, rhamnolipid, bacitracin) and Tween 80 increased the rate of hydrolysis of Sigmacell 100, as measured by the amount of reducing sugar produced, by as much as seven times. The hydrolysis of steam-exploded wood was increased by 67% in the presence of sophorolipid. At the same time, sophorolipid was found to decrease the amount of enzyme adsorbed onto the cellulose at equilibrium. Sophorolipid had the greatest effect on cellulose hydrolysis when it was present from the beginning of the experiment and when the enzyme/cellulose ratio was low. (c) 1993 John Wiley & Sons, Inc.     

Cloning of cellulose synthesis related genes from Acetobacter xylinum ATCC23769 and ATCC53582: comparison of cellulose synthetic ability between strains.

About 14.5 kb of DNA fragments from Acetobacter xylinum ATCC23769 and ATCC53582 were cloned, and their nucleotide sequences were determined. The sequenced DNA regions contained endo-beta-1,4-glucanase, cellulose complementing protein, cellulose synthase subunit AB, C, D and beta-glucosidase genes. The results from a homology search of deduced amino acid sequences between A. xylinum ATCC23769 and ATCC53582 showed that they were highly similar. However, the amount of cellulose production by ATCC53582 was 5 times larger than that of ATCC23769 during a 7-day incubation. In A. xylinum ATCC53582, synthesis of cellulose continued after glucose was consumed, suggesting that a metabolite of glucose, or a component of the medium other than glucose, may be a substrate of cellulose. On the other hand, cell growth of ATCC23769 was twice that of ATCC53582. Glucose is the energy source in A. xylinum as well as the substrate of cellulose synthesis, and the metabolic pathway of glucose in both strains may be different. These results suggest that the synthesis of cellulose and the growth of bacterial cells are contradictory.     

Free radical degradation of hydroxyethyl cellulose

The degradation of hydroxyethyl cellulose (HEC) using sodium persulfate (NaPS) as free radical generator was studied at 60, 70 and 80 °C with different NaPS/HEC ratios. During the degradation reaction samples were withdrawn at regular intervals. The amount of persulfate remaining was analyzed by titration and the evolution of the HEC molecular weight distribution and viscosity was followed using size exclusion chromatography (SEC) and rheology, respectively. The results show how the molecular weight of HEC is decreased by varying the NaPS/HEC ratio, reaction time and temperature. It was found that the NaPS/HEC ratio must be kept low in order to maintain the control of the degradation process, since when the NaPS/HEC ratio was too high the degradation rate of HEC was too fast, and the molecular weight distribution became bimodal. Additionally, the decomposition rate of NaPS was found to be independent of pH in the range between pH 2 and 7.     

醋酸杆菌发酵生产细菌纤维素的研究进展

简要介绍醋酸杆菌发酵生产纤维素研究进展,内容包括：产纤维素的微生物、醋酸菌纤维素的结构特点、生物合成途径、一般提取处理及分析测定方法、商业用途、工业化发酵生产醋酸菌纤维素过程中存在的主要问题及发展前景。     

Utilization of hydroxypropyl cellulose and poly(acrylic acid)-hydroxypropyl cellulose composite as thickeners for textile printing

Trials were carried out to partially replace kerosene oil with hydroxypropyl cellulose (HPC), poly(acrylic acid)-hydroxypropyl cellulose composite (poly (AA)-HPC) and their mixture in pigment printing paste. Partial replacement was carried out under a variety of conditions. Variables studied include type and concentration of the aqueous thickening agent and type of pigment dyes. In addition to that, poly (AA)-HPC composite was tried to replace sodium alginate in reactive printing. The fastness properties, color strength and stiffness were measured for the reactive and pigment printed samples.