Effects of DNA Size on Transformation and Recombination Efficiencies in Xylella fastidiosa

Horizontally transferred DNA acquired through transformation and recombination has the potential to contribute to the diversity and evolution of naturally competent bacteria. However, many different factors affect the efficiency with which DNA can be transformed and recombined. In this study, we determined how the size of both homologous and nonhomologous regions affects transformation and recombination efficiencies in Xylella fastidiosa, a naturally competent generalist pathogen responsible for many emerging plant diseases. Our experimental data indicate that 96 bp of flanking homology is sufficient to initiate recombination, with recombination efficiencies increasing exponentially with the size of the homologous flanking region up to 1 kb. Recombination efficiencies also decreased with the size of the nonhomologous insert, with no recombination detected when 6 kb of nonhomologous DNA was flanked on either side by 1 kb of homologous sequences. Upon analyzing sequenced X. fastidiosa subsp. fastidiosa genomes for evidence of allele conversion, we estimated the mean size of recombination events to be 1,906 bp, with each event modifying, on average, 1.79% of the nucleotides in the recombined region. There is increasing evidence that horizontally acquired genes significantly affect the genetic diversity of X. fastidiosa, and DNA acquired through natural transformation could be a prominent mode of this horizontal transfer.     

DNA oligonucleotide-assisted genetic manipulation increases transformation and homologous recombination efficiencies: Evidence from gene targeting of Dictyostelium discoideum

Artificial gene alteration by homologous recombination in living cells, termed gene targeting, presents fundamental and considerable knowledge of in vivo gene function. In principle, this method can possibly be applied to any type of genes and transformable cells. However, its success is limited due to a low frequency of homologous recombination between endogenous targeted gene and exogenous transgene. Here, we describe a general gene-targeting method in which co-transformation of DNA oligonucleotides (oligomers) could significantly increase the homologous recombination frequency and transformation efficiency. The oligomers were simply designed such that they were identical to both the ends of the homologous flanking regions of the targeting construct. Using this strategy, both targeted alleles of diploid cells were simultaneously replaced in a single transformation procedure. Thus, the simplicity and versatility of this method applicable to any type of cell may increase the application of gene targeting.     

A rapid method for efficient gene replacement in the filamentous fungus Aspergillus nidulans

The construction of mutant fungal strains is often limited by the poor efficiency of homologous recombination in these organisms. Higher recombination efficiencies can be obtained by increasing the length of homologous DNA flanking the transformation marker, although this is a tedious process when standard molecular biology techniques are used for the construction of gene replacement cassettes. Here, we present a two-step technology which takes advantage of an Escherichia coli strain expressing the phage λ Red(gam, bet, exo) functions and involves (i) the construction in this strain of a recombinant cosmid by in vivo recombination between a cosmid carrying a genomic region of interest and a PCR-generated transformation marker flanked by 50 bp regions of homology with the target DNA and (ii) genetic exchange in the fungus itself between the chromosomal locus and the circular or linearized recombinant cosmid. This strategy enables the rapid establishment of mutant strains carrying gene knock-outs with efficiencies >50%. It should also be appropriate for the construction of fungal strains with gene fusions or promoter replacements.     

Homologous recombination efficiency enhanced by inhibition of MEK and GSK3β

Homologous recombination in embryonic stem cells (ESCs) is widely utilized in genome engineering, particularly in the generation of gene targeted mice. However, genome engineering is often plagued by the problem of low homologous recombination efficiency. In this study, we developed a novel method to increase the efficiency of homologous recombination in ESCs by changing its culture conditions. By comparing the efficiency of different ESCs in various culture conditions, we determined that chemicals that inhibit the MEK and GSK3β pathways (2i condition) enhance homologous recombination and eliminate differences in efficiencies among cell lines. Analysis of gene expression patterns in ESCs maintained in different culture conditions has identified several homologous recombination‐related candidates, including the pluripotent markers Eras and Tbx3. The results of this study suggest that homologous recombination is associated with ESC pluripotency. genesis 52:889–896, 2014. © 2014 Wiley Periodicals, Inc.     

The frequency of gene targeting in Trypanosoma brucei is independent of target site copy number

We have investigated the effect of target copy number on the efficiency of stable transformation of the protozoan parasite Trypanosoma brucei. Using a single strain of the organism, we targeted integrative vectors to several different genomic sequences, occurring at copy numbers ranging from 1 to ~30 000 per diploid genome, and undertook a systematic assessment of both transformation and integration efficiencies. Even over this vast copy number range, frequency of gene targeting was the same for all sites. An independence of targeting frequency and target copy number is characteristic of mammalian homologous recombination and is unlike the situation in budding yeast. It is also not seen in the related parasite Leishmania, a distinction that may be the consequence of the different usage of recombination within the mechanisms of pathogenicity in the two species.     

Identification of low frequency knockout mutants in Dictyostelium discoideum created by single or double homologous recombination

Generation and characterization of knockout clones is a widely used approach to evaluate the specific function of a gene product in Dictyostelium discoideum. The mutant clones are generally obtained by double homologous recombination in the target gene. A frequent limitation to obtaining mutants is the low frequency of homologous recombination. Here we present an easy method to identify rare mutants, based on PCR analysis of pools of clones. This method also allows the isolation of functional knockout mutants created by a single homologous recombination event, which can be more frequent than a double recombination event.     

Generation of double gene disruptions in Dictyostelium discoideum using a single antibiotic marker selection

Gene targeting is a powerful molecular genetic technique that has been widely used to understand specific gene function in vivo. This technique allows the ablation of an endogenous gene by recombination between an introduced DNA fragment and the homologous target gene. However, when multiple gene disruptions are needed, the availability of only a limited number of marker genes becomes a complication. Here we describe a new approach to perform double gene disruptions in Dictyostelium discoideum by simultaneous transfection of two gene targeting cassettes followed by performing clonal selection against only one marker gene. The subsequent PCR-based screens of blasticidin-resistant clones revealed the integration of both the selected and the nonselected targeting cassettes at their original respective loci creating complete gene disruptions. For the genes we have tested in these studies (myosin heavy chain kinases B and C), the efficiency of the double gene targeting event is found in the range of 2%-5% of all blasticidin-resistant colonies following the transfection step. This approach for the simultaneous disruptions of multiple genes should prove to be a valuable tool for other laboratories interested in creating multiple gene disruptants in Dictyostelium or other organisms where a limited number of selectable markers are available.     

Development of an efficient agrobacterium-mediated gene targeting system for rice and analysis of rice knockouts lacking granule-bound starch synthase (Waxy) and β1,2-xylosyltransferase

We have developed a high-frequency method for Agrobacterium-mediated gene targeting by combining an efficient transformation system using rice suspension-cultured calli and a positive/negative selection system. Compared with the conventional transformation system using calli on solid medium, transformation using suspension-cultured calli resulted in a 5- to 10-fold increase in the number of resistant calli per weight of starting material after positive/negative selection. Homologous recombination occurred in about 1.5% of the positive/negative selected calli. To evaluate the efficacy of our method, we show in this report that knockout rice plants containing either a disrupted Waxy (granule-bound starch synthase) or a disrupted Xyl (β1,2-xylosyltransferase) gene can be easily obtained by homologous recombination. Study of gene function using homologous recombination in higher plants can now be considered routine work as a direct result of this technical advance.     

Electroporation of Tobacco Protoplasts with Homologous and Nonhomologous Transformation Vectors

A modified protoplast selection/plating technique was used to quantitate and compare the transformation efficiencies of tobacco NTl protoplasts electroporated with plasmid molecules harboring a chimeric nos-neo gene (pMON213) or both this chimeric gene and a region of homology with the host chromosome (pCPI). The latter plasmid was constructed by cloning the pMON213 EcoR I cassette carrying the nos-neo gene into pNtSS233, a pBR322 derivative harboring a 1.2-kbp piece of Nicotiana tabacum DNA comprising the 5'-end of a gene coding for 1,5-ribulose bisphosphate carboxylase-oxygenase (Rubisco). These plasmids were linearized by restriction endonuclease digestion and electroporated into tobacco protoplasts which were subsequently selected on kanamycin-containing medium. Both plasmids displayed the same transformation efficiency, indicating that the presence of a homologous region in the selectable vector had no influence on the rates of transformation.     

Transformation of Dictyostelium discoideum with plasmid DNA

DNA-mediated transformation is one of the most widely used techniques to study gene function. The eukaryote Dictyostelium discoideum is amenable to numerous genetic manipulations that require insertion of foreign DNA into cells. Here we describe two commonly used methods to transform Dictyostelium cells: calcium phosphate precipitation, resulting in high copy number transformants; and electroporation, an effective technique for producing single integration events into genomic DNA. Single integrations are required for gene disruption by homologous recombination. We also discuss how different selection markers affect vector copy number in transformants and explain why blasticidin has become the preferred selectable marker for making gene knockouts. Both procedures can be accomplished in less than 2 h of hands-on time; however, the calcium phosphate precipitation method contains several incubations, including one of at least 4 h, so the total time required for the transformation is approximately 8 h.     

High frequency transformation of Cryptococcus neoformans and Cryptococcus gattii by Agrobacterium tumefaciens

Cryptococcus neoformans and Cryptococcus gattii are the caus-ative agents of cryptococcal meningoencephalitis and are amenable to genetic manipulations, making them important models of pathogenic fungi. To improve the efficiency of Agrobacterium tumefaciens mediated transformation (ATMT) in C. neoformans, we optimized various co-cultivation conditions including incubation time and temperature, and bacteria to yeast ratio. ATMT was also applied to both serotypes (B and C) of C. gattii. Transformation efficiency by ATMT in C. neoformans was comparable to either electroporation or biolistic transformation and gave superior efficiencies in serotypes B and C, but unlike Saccharomyces cerevisiae, adenine auxotrophy did not increase ATMT efficiency in C. neoformans or C. gattii. All transformants tested were stable, with a majority containing only a single T-DNA insertion; however, homologous recombination was not observed. Additionally, we isolated adenine auxotrophs containing a single T-DNA insertion in the ADE2 gene for representative serotype B and C strains.     

Efficient generation of gene knockout plasmids for Dictyostelium discoideum using one-step cloning

The amoeba Dictyostelium discoideum is a well-established model organism for studying numerous aspects of cellular and developmental functions. Its rather small (~34Mb) chromosomal genome and the high efficiency of gene disruption by homologous recombination have enabled researchers to dissect various specific gene functions. We describe here the use of one-step cloning for the fast and efficient generation of deletion vectors that are produced in a one-step reaction by inserting two PCR products into an organism-specific, generic acceptor system. This worked efficiently for all 16 tested constructs directed against genes in the amoeba Dictyostelium discoideum. Saving cost and time, the used protocol represents a significant advancement in the generation of such plasmids compared to the conventionally applied restriction enzyme/ligation approach. Using appropriate selection markers, similar systems could also be useful in other organisms, where genes can be knocked out by homologous recombination.     

Homologous recombination between single-stranded DNA and chromosomal genes in Saccharomyces cerevisiae.

Transformation of Saccharomyces cerevisiae strains was examined by using the URA3 and TRP1 genes cloned into M13 vectors in the absence of sequences capable of promoting autonomous replication. These constructs transform S. cerevisiae cells to prototrophy by homologous recombination with the resident mutant gene. Single-stranded DNA was found to transform S. cerevisiae cells at efficiencies greater than that of double-stranded DNA. No conversion of single-stranded transforming DNA into duplex forms could be detected during the transformation process, and we conclude that single-stranded DNA may participate directly in recombination with chromosomal sequences. Transformation with single-stranded DNA gave rise to both gene conversion and reciprocal exchange events. Cotransformation with competing heterologous single-stranded DNA specifically inhibited transformation by single-stranded DNA, suggesting that one of the components in the transformation-recombination process has a preferential affinity for single-stranded DNA.     

PCR ligation mutagenesis in transformable streptococci: application and efficiency

PCR ligation mutagenesis is a novel technique that can easily be adapted for many gene modification purposes. Successful application of this versatile technique involves sequence identification of the target gene region, creation of a mutagenic construct consisting of two gene-flanking proximal sequences specifically ligated to a selectable marker, and incorporation of this construct into the genome via genetic transformation and homologous recombination. In this study, we demonstrate the use of PCR, followed by restriction digestion and re-ligation to generate transforming constructs for the rapid deletion of open reading frames in transformable streptococci. Moreover, we characterized the dependence of transformation efficiency for mutant generation on the length of the homologous regions harbored by the mutagenic construct. Our results indicated that PCR ligation mutagenesis could be reliably employed for the systematic generation of gene deletion mutants in both highly transformable Streptococcus mutans and S. pneumoniae. Evaluation of the method showed a strong influence of the length of homologous flanking region on integration efficiency.     

A novel approach to plastid transformation utilizes the phiC31 phage integrase

Thus far plastid transformation in higher plants has been based on incorporation of foreign DNA in the plastid genome by the plastid's homologous recombination machinery. We report here an alternative approach that relies on integration of foreign DNA by the phiC31 phage site-specific integrase (INT) mediating recombination between bacterial and phage attachment sites (attB and attP, respectively). Plastid transformation by the new approach depends on the availability of a recipient line in which an attB site has been incorporated in the plastid genome by homologous recombination. Plastid transformation involves insertion of an attP vector into the attB site by INT and selection of transplastomic clones by selection for antibiotic resistance carried in the attP plastid vector. INT function was provided by either expression from a nuclear gene, which encoded a plastid-targeted INT, or expressing INT transiently from a non-integrating plasmid in plastids. Transformation was successful with both approaches using attP vectors with kanamycin resistance or spectinomycin resistance as the selective marker. Transformation efficiency in some of the stable nuclear INT lines was as high as 17 independently transformed lines per bombarded sample. As this system does not rely on the plastid's homologous recombination machinery, we expect that INT-based vectors will make plastid transformation a routine in species in which homologous recombination rarely yields transplastomic clones.     

Gene recombination in X-ray-sensitive hamster cells.

Recombination was measured in Chinese hamster ovary (CHO-K1) cells and in the X-ray-sensitive mutants xrs1 and xrs7, which show a defect in DNA double-strand break repair. To assay recombination, pairs of derivatives of the plasmid pSV2gpt were constructed with nonoverlapping deletions in the gpt gene region and cotransferred into the different cell types. Recombination efficiencies, measured as the transformation frequency with a pair of deletion plasmids relative to that with the complete pSV2gpt plasmid, were about 6% in both CHO-K1 and the xrs mutants for plasmids linearized at a site outside the gpt gene. However, these efficiencies were substantially enhanced by the introduction of a double-strand break into the homologous region of the gpt gene in one of a pair of deletion plasmids before cotransfer. This enhancement was apparently only about half as great for the xrs cells as for CHO-K1, but variation in the data was considerable. A much larger difference between CHO-K1 and the xrs mutants was found when the DNA concentration dependence of transformation was explored. While the transformation frequency of CHO-K1 increased linearly with DNA concentration, no such increase occurred with the xrs mutants irrespective of whether complete plasmids or pairs of deletion plasmids were transferred. The fraction of cells taking up DNA, assayed autoradiographically, was similar in all cell types. Therefore we suggest that while homologous recombination of plasmid molecules may not be substantially reduced in the xrs mutants,processes involved in the stable integration of plasmid DNA into genomic DNA are significantly impaired.     

Gene replacement in Dictyostelium: generation of myosin null mutants.

The eukaryotic slime mold Dictyostelium discoideum has a single conventional myosin heavy chain gene (mhcA). The elimination of the mhcA gene was achieved by homologous recombination. Two gene replacement plasmids were constructed, each carrying the G418 resistance gene as a selective marker and flanked by either 0.7 kb of 5' coding sequence and 0.9 kb of 3' coding sequence or 1.5 kb of 5' flanking sequence and 1.1 kb of 3' flanking sequence. Myosin null mutants (mhcA- cells) were obtained after transformation with either of these plasmids. The mhcA- cells are genetically stable and are capable of a variety of motile processes. Our results provide genetic proof that in Dictyostelium the conventional myosin gene is required for growth in suspension, normal cell division and sporogenesis, and illustrate how gene targeting can be used as a tool in Dictyostelium.     

Homologous, homeologous, and illegitimate repair of double-strand breaks during transformation of a wild-type strain and a rad52 mutant strain of Saccharomyces cerevisiae.

Different modes of in vivo repair of double-strand breaks (DSBs) have been described for various organisms: the recombinational DSB repair (DSBR) mode, the single-strand annealing (SSA) mode, and end-to-end joining. To investigate these modes of DSB repair in Saccharomyces cerevisiae, we have examined the fate of in vitro linearized replicative plasmids during transformation with respect to several parameters. We found that (i) the efficiencies of both intramolecular and intermolecular linear plasmid DSB repair are homology dependent (according to the amount of DNA used during transformation [100 ng or less], recombination between similar but not identical [homeologous] P450s sequences sharing 73% identity is 2- to 18-fold lower than recombination between identical sequences); (ii) the RAD52 gene product is not essential for intramolecular recombination between homologous and homeologous direct repeats (as in the wild-type strain, recombination occurs with respect to the overall alignment of the parental sequences); (iii) in contrast, the RAD52 gene product is required for intermolecular interactions (the rare transformants which are obtained contain plasmids resulting from deletion-forming intramolecular events involving little or no sequence homology); (iv) similarly, sequencing data revealed examples of intramolecular joining within the few terminal nucleotides of the transforming DNA upon transformation with a linear plasmid with no repeat in the wild-type strain. The recombinant junctions of the rare illegitimate events obtained with S. cerevisiae are very similar to those observed in the repair of DSB in mammalian cells. Together, these and previous results suggest the existence of alternative modes for DSB repair during transformation which differ in their efficiencies and in the structure of their products. We discuss the implications of these results with respect to the existence of alternative pathways and the role of the RAD52 gene product.     

Improvement of culture conditions and evidence for nuclear transformation by homologous recombination in a red alga, Cyanidioschyzon merolae 10D

Although the nuclear genome sequence of Cyanidioschyzon merolae 10D, a unicellular red alga, was recently determined, DNA transformation technology that is important as a model plant system has never been available thus far. In this study, improved culture conditions resulted in a faster growth rate of C. merolae in liquid medium (doubling time = 9.2 h), and colony formation on gellan gum plates. Using these conditions, spontaneous mutants (5-fluoroortic acid resistant) deficient in the UMP synthase gene were isolated. The lesions were then restored by introducing the wild-type UMP synthase gene into the cells suggesting DNA transformation by homologous recombination.     

The Efficiency of Meiotic Recombination between Dispersed Sequences in Saccharomyces Cerevisiae Depends upon Their Chromosomal Location

To examine constraints imposed on meiotic recombination by homologue pairing, we measured the frequency of recombination between mutant alleles of the ARG4 gene contained in pBR322-based inserts. Inserts were located at identical loci on homologues (allelic recombination) or at different loci on either homologous or heterologous chromosomes (ectopic recombination). Ectopic recombination between interstitially located inserts on heterologous chromosomes had an efficiency of 6-12% compared to allelic recombination. By contrast, ectopic recombination between interstitial inserts located on homologues had relative efficiencies of 47-99%. These findings suggest that when meiotic ectopic recombination occurs, homologous chromosomes are already colocalized. The efficiency of ectopic recombination between inserts on homologues decreased as the physical distance between insert sites was increased. This result is consistent with the suggestion that during meiotic recombination, homologues are not only close to each other, but also are aligned end to end. Finally, the efficiency of ectopic recombination between inserts near telomeres (within 16 kb) was significantly greater than that observed with inserts >50 kb from the nearest telomere. Thus, at the time of recombination, there may be a special relationship between the ends of chromosomes not shared with interstitial regions.