Thermogelling poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer as a thiol-sensitive degradable polymer

We report a reverse thermogelling poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer as a thiol-sensitive biodegradable polymer. The poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) aqueous solutions studied in this research underwent sol-gel-sol or sol-gel-sol-gel transition depending on the molecular weight and concentration of the polymer, whereas the corresponding disulfide multiblock copolymer aqueous solutions underwent sol-gel transition as the temperature increased in a range of 0-60 degrees C. The hydrophobic dye solubilization and dynamic light scattering of the polymer aqueous solution suggest that the poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)s undergo unimer (3 nm) to micelle (12 nm) transition, whereas the disulfide multiblock copolymers undergo unimer (6 nm) to aggregated polymer (600 nm) transition as the temperature increases. The gel duration increased from 6 h (poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)) to more than 12 days (the corresponding disulfide multiblock copolymer) in phosphate buffer saline, and the gel duration of the latter depended on the glutathione concentration of the medium. The model drug, paclitaxel, was released from the in-situ-formed poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer gel in a glutathione concentration-sensitive manner.     

Small-angle X-ray scattering study of the interaction of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers with lipid bilayers

The relationship between molecular architecture and the nature of interactions with lipid bilayers has been studied for a series of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers using small-angle X-ray scattering (SAXS) and thermal analysis (differential scanning calorimetry, DSC). The number of molecular repeat units in the hydrophobic poly(propylene oxide), PPO, block has been found to be a critical determinant of the nature of triblock copolymer-lipid bilayer association. For dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-based biomembrane structures, polymers possessing a PPO chain length commensurate with the acyl chain dimensions of the lipid bilayer yield highly ordered, swollen lamellar structures consistent with well-integrated (into the lipid bilayer) PPO blocks. Triblock copolymers of lesser PPO chain length yield materials with structural characteristics similar to a simple dispersion of DMPC in water. Increasing the concentration (from 4 to 12 mol %) of well-integrated triblock copolymers enhances the structural ordering of the lamellar phase, while concentrations exceeding 16 mol % result in the formation of a hexagonal phase. Examination of temperature-induced changes in the structure of these mesophases (complex fluids) reveals that if the temperature is reduced sufficiently, all compositions exclude polymer and thus exhibit the characteristic SAXS pattern for hydrated DMPC bilayers. Increasing the temperature promotes better insertion of the polymers possessing PPO chain lengths sufficient for membrane insertion. No temperature-induced structural changes are observed in compositions prepared with PEO-PPO-PEO polymers that feature PPO length insufficient to permit full incorporation into the lipid bilayer.     

Poly(organo phosphazene) nanoparticles surface modified with poly(ethylene oxide)

The use of biodegradable derivatives of poly(organo phosphazenes) for the preparation of nanoparticles and their surface modification with the novel poly(ethylene oxide) derivative of poly(organo phosphazene) has been assessed using a range of in vitro characterization methods. The nanoparticles were produced by the precipitation solvent evaporation method from the derivative co-substituted with phenylalanine and glycine ethyl ester side groups. A reduction in particle size to less than 200 nm was achieved by an increase in pH of the preparation medium. The formation (and colloidal stability) of these nanoparticles seems to be controlled by two opposite effects: attractive hydrophobic interactions between phenylalanine ester groups and electrostatic repulsions arising from the carboxyl groups formed due to (partial) hydrolysis of the ester bond(s) at the high pH of the preparation medium. The poly[(glycine ethyl ester)phosphazene] derivative containing 5000-Da poly(ethylene oxide) as 5% of the side groups was used for the surface modification of nanoparticles. Adsorbed onto the particles, the polymer produced a thick coating layer of approximately 35 nm. The coated nanoparticles exhibited reduced surface negative potential and improved colloidal stability toward electrolyte-induced flocculation, relative to the uncoated system. However, the steric stabilization provided was less effective than that of a Poloxamine 908 coating. This difference in effectiveness of the steric stabilization might indicate that, although both the stabilizing polymers possess a 5000-Da poly(ethylene oxide) moiety, there is a difference in the arrangements of these poly(ethylene oxide) chains at the particle surface. (c) 1996 John Wiley & Sons, Inc.     

Phase separation in the mixture of schizophyllan and poly(ethylene oxide) in aqueous solution driven by a specific interaction between the glucose side chain and poly(ethylene oxide)

We found that the mixture of schizophyllan and poly(ethylene oxide) in aqueous solution underwent phase separation at around 3-4 degrees C, and this temperature was independent of both polymer concentration and the difference in poly(ethylene oxide) molecular weight (Mw 6000 and 70,000). The phase-separation took place at the same temperature at which the optical rotation changed. Since the optical rotation change is ascribed to the difference in the nature of hydrogen bonding between the schizophyllan side chain and water, the phase separation is also considered to be due to an interaction between poly(ethylene oxide) and schizophyllan. The phase-separation temperature increased on changing H2O to D2O in accordance with a change in the optical rotation, confirming the specific interaction essential for the phase separation.     

Biodegradable polymeric nanospheres formed by temperature-induced phase transition in a mixture of poly(lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer

The mixture of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer(F-127) and PLGA (poly(lactide-co-gycolide)) forms a liquid state above their phase transition temperatures, and the phase-separated state is induced by decreasing the temperature below the phase transition temperature. On the basis of the temperature-induced phase transition behavior in the mixture of F-127 and PLGA, a novel method for the preparation of drug-loaded PLGA nanospheres was designed and characterized by measuring the loading amount, the encapsulation efficiency, and the drug release pattern. Paclitaxel, used as a potent anticancer drug, was selected as a model drug.     

Synthesis and characterization of poly(ethylene oxide)-block-poly(methylidene malonate 2.1.2) block copolymers bearing a mannose group at the PEO chain end

A poly(ethylene oxide)-block-poly(methylidene malonate 2.1.2) block copolymer (PEO-b-PMM 2.1.2) bearing a mannose moiety at the poly(ethylene oxide) chain end was synthesized by sequential anionic polymerization of ethylene oxide (EO) and methylidene malonate 2.1.2 (MM 2.1.2), followed by a coupling reaction between its poly(ethylene oxide) amino- or aldehyde-end group and a sugar derivative. Different coupling procedures, either in organic media or in aqueous micellar solutions, were examined in order to optimize the poly(ethylene oxide) end-glycosylation yield. The micellar size of the functionalized block copolymers was determined by dynamic light scattering.     

Different mechanisms of action of poly(ethylene glycol) and arginine on thermal inactivation of lysozyme and ribonuclease A

Proteins tend to undergo irreversible inactivation through several chemical modifications, which is a serious problem in various fields. We have recently found that arginine (Arg) suppresses heat‐induced deamidation and β‐elimination, resulting in the suppression of thermal inactivation of hen egg white lysozyme and bovine pancreas ribonuclease A. Here, we report that poly(ethylene glycol) (PEG) with molecular weight 1,000 acts as a thermoinactivation suppressor for both proteins, especially at higher protein concentrations, while Arg was not effective at higher protein concentrations. This difference suggests that PEG, but not Arg, effectively inhibited intermolecular disulfide exchange among thermally denatured proteins. Investigation of the effects of various polymers including PEG with different molecular weight, poly(vinylpyrolidone) (PVP), and poly(vinyl alchol) on thermoinactivation of proteins, circular dichroism, solution viscosity, and the solubility of reduced and S‐carboxy‐methylated lysozyme indicated that amphiphilic PEG and PVP inhibit intermolecular collision of thermally denatured proteins by preferential interaction with thermally denatured proteins, resulting in the inhibition of intermolecular disulfide exchange. These findings regarding the different mechanisms of the effects of amphiphilic polymers––PEG and PVP––and Arg would expand the capabilities of methods to improve the chemical stability of proteins in solution. Biotechnol. Bioeng. 2012; 109: 2543–2552. © 2012 Wiley Periodicals, Inc.     

Solubilization of docetaxel in poly(ethylene oxide)-block-poly(butylene/styrene oxide) micelles

Poly(ethylene oxide)-block-poly(styrene oxide) (PEO-b-PSO) and PEO-b-poly(butylene oxide) (PEO-b-PBO) of different chain lengths were synthesized and characterized for their self-assembling properties in water by dynamic/static light scattering, spectrofluorimetry, and transmission electron microscopy. The resulting polymeric micelles were evaluated for their ability to solubilize and protect the anticancer drug docetaxel (DCTX) from degradation. The drug release kinetics as well as the cytotoxicity of the loaded micelles were assessed in vitro. All polymers formed micelles with a highly viscous core at low critical association concentrations (<10 mg/L). Micelle morphology depended on the nature of the hydrophobic block, with PBO- and PSO-based micelles yielding monodisperse spherical and cylindrical nanosized aggregates, respectively. The maximum solubilization capacity for DCTX ranged from 0.7 to 4.2% and was the highest for PSO micelles exhibiting the longest hydrophobic segment. Despite their high affinity for DCTX, PEO-b-PSO micelles were not able to efficiently protect DCTX against hydrolysis under accelerated stability testing conditions. Only PEO-b-PBO bearing 24 BO units afforded significant protection against degradation. In vitro, DCTX was released slower from the latter micelles, but all formulations possessed a similar cytotoxic effect against PC-3 prostate cancer cells. These data suggest that PEO-b-P(SO/BO) micelles could be used as alternatives to conventional surfactants for the solubilization of taxanes.     

Heterobifunctional poly(ethylene oxide) oligomers containing carboxylic acids

Syntheses of vinylsilyl alcohols having one to three vinyl moieties and their use as initiators for ethylene oxide polymerizations are discussed. Poly(ethylene oxide) oligomers with vinylsilanes at one end and a hydroxyl group at the other were prepared in base-catalyzed reactions. Molecular weights determined from 1H NMR and gel permeation chromatography were close to the targeted values. Carboxylic acid functional poly(ethylene oxide) oligomers were prepared from ene-thiol addition reactions of mercaptoacetic acid across the vinylsilane terminus. It is anticipated that these carboxylic acid functional oligomers will complex to magnetite nanoparticles to afford complexes that can be dispersed in aqueous media.     

A facile synthesis of azido-terminated heterobifunctional poly(ethylene glycol)s for "click" conjugation

New azido-terminated heterobifunctional poly(ethylene glycol) (PEG) derivatives having primary amine and carboxyl end groups, (Azide-PEG-NH 2 and Azide-PEG-COOH, respectively) were synthesized with high efficiency. An alpha-allyl-omega-hydroxyl PEG was prepared as the first step to Azide-PEG-X (X = NH 2 and COOH) through the ring-opening polymerization of ethylene oxide (EO) with allyl alcohol as an initiator, followed by two-step modification of the hydroxyl end to an azido group. To introduce primary amino or carboxyl functional groups, amination and carboxylation reactions of the allyl terminal ends was then conducted by a radical addition of thiol compounds. Molecular functionalities of both ends of the PEG derivatives thus prepared were characterized by (1)H, (13)C NMR, and MALDI-TOF MS spectra, validating that the reaction proceeded quantitatively. The terminal azido functionality is available to conjugate various ligands with an alkyne group through the 1,3-dipolar cycloaddition reaction condition ("click chemistry").     

Osmotic properties of poly(ethylene glycols): quantitative features of brush and bulk scaling laws

From glycosylated cell surfaces to sterically stabilized liposomes, polymers attached to membranes attract biological and therapeutic interest. Can the scaling laws of polymer "brushes" describe the physical properties of these coats? We delineate conditions where the Alexander-de Gennes theory of polymer brushes successfully fits the intermembrane distance versus applied osmotic stress data of Kenworthy et al. for poly(ethylene glycol)-grafted multilamellar liposomes. We establish that the polymer density and size in the brush must be high enough that, in a bulk solution of equivalent monomer density, the polymer osmotic pressure is independent of polymer molecular weight (the des Cloizeaux semidilute regime of bulk polymer solutions). The condition that attached polymers behave as semidilute bulk solutions offers a rigorous criterion for brush scaling-law behavior. There is a deep connection between the behaviors of semidilute polymer solutions in bulk and polymers grafted to a surface at a density such that neighbors pack to form a uniform brush. In this regime, two-parameter unconstrained fits of the Alexander-de Gennes brush scaling laws to the Kenworthy et al. data yield effective monomer lengths of 3.3-3.6 A, which agree with structural predictions. The fitted distances between grafting sites are larger than expected from the nominal mole fraction of poly(ethylene glycol)-lipids; the chains apparently saturate the surface. Osmotic stress measurements can be used to estimate the actual densities of membrane-grafted polymers.     

From multifunctionalized poly(ethylene imine)s toward antimicrobial coatings

Primary amine groups of branched poly(ethylene imine) (PEI) were functionalized with quaternary ammonium groups, alkyl chains of different length, allylic and benzylic groups in a one-step reaction, using a carbonate coupler. The structure of the obtained amphiphilic polymers was determined by means of 1H and 13C NMR spectroscopy. Depending on their hydrophilic/hydrophobic balance, the obtained polymers can be used as water-soluble disinfectants and for antimicrobial coating materials. The bactericidal properties of some of the amphiphilic polymers against Gram-negative and Gram-positive bacteria were investigated. Minimal inhibitory concentrations (log 4 reduction of bacterial growth) against Escherichia coli and Bacillus subtilis were determined in the range of 0.3-0.4 mg/mL and 0.03-0.04 mg/mL for water-soluble polymers. Glass slides coated with functionalized PEIs showed a reduction of colony forming units of at least 95%, at best 99.9%, against E. coli and B. subtilis.     

Protein-resistant silicones: incorporation of poly(ethylene oxide) via siloxane tethers

Silicones with enhanced protein resistance were prepared by introducing poly(ethylene oxide) (PEO) chains via siloxane tethers (a-c) of varying lengths. Three unique ambifunctional molecules (a-c) having the general formula alpha-(EtO)3Si(CH2)2-oligodimethylsiloxanen-block-poly(ethylene oxide)8-OCH3 (n = 0 (a), 4, (b), and 13 (c)) were prepared via regioselective Rh-catalyzed hydrosilylation. Nine films were subsequently produced by the H3PO4-catalyzed sol-gel cross-linking of a-c each with alpha,omega-bis(Si-OH)polydimethylsiloxane (P, Mn = 3000 g/mol) in varying ratios (1:1, 1:2, and 2:3 molar ratio a, b, or c to P). Films prepared with a 2:3 molar ratio (a-c to P) contained the least amount of un-cross-linked materials, which may migrate to the film surface. For this set of films, surface hydrophilicity and protein resistance increased with siloxane tether length (a-c). These results indicate that PEO was more effectively mobilized to the surface if incorporated into silicones via longer siloxane tethers.     

Transdermal photopolymerization of poly(ethylene oxide)-based injectable hydrogels for tissue-engineered cartilage

Transdermal photopolymerization, a minimally invasive method for implantation, was used to subcutaneously place a mixture of polymer and isolated chondrocytes to regenerate cartilage tissue in vivo. Semi-interpenetrating networks of varying proportions of poly(ethylene oxide)-dimethacrylate and poly(ethylene oxide) and primary bovine articular chondrocytes were implanted in athymic mice. Four mice (12 implants) were harvested at 2, 4, and 7 weeks. Chondrocytes survived implantation and photopolymerization and formed neocartilage containing 1.5 to 2.9% wet weight collagen and 4 to 7% glycosaminoglycan. Thirty-five percent of the total collagen was type II collagen. Histologic analysis exhibited tissue structure resembling neocartilage, and safranin O staining demonstrated glycosaminoglycan distribution throughout the hydrogels. This study demonstrates the potential use of transdermal photopolymerization for minimally invasive subcutaneous implantation of hydrogels and chondrocytes for in vivo cartilage regeneration.     

Mannosylated poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymers: synthesis, characterization, and interaction with a bacterial lectin

A novel bioeliminable amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) diblock copolymer end-capped by a mannose residue was synthesized by sequential controlled polymerization of ethylene oxide and epsilon-caprolactone, followed by the coupling of a reactive mannose derivative to the PEO chain end. The anionic polymerization of ethylene oxide was first initiated by potassium 2-dimethylaminoethanolate. The ring-opening polymerization of epsilon-caprolactone was then initiated by the omega-hydroxy end-group of PEO previously converted into an Al alkoxide. Finally, the saccharidic end-group was attached by quaternization of the tertiary amine alpha-end-group of the PEO-b-PCL with a brominated mannose derivative. The copolymer was fully characterized in terms of chemical composition and purity by high-resolution NMR spectroscopy and size exclusion chromatography. Furthermore, measurements with a pendant drop tensiometer showed that both the mannosylated copolymer and the non-mannosylated counterpart significantly decreased the dichloromethane/water interfacial tension. Moreover, these amphiphilic copolymers formed monodisperse spherical micelles in water with an average diameter of approximately 11 nm as measured by dynamic light scattering and cryo-transmission electron microscopy. The availability of mannose as a specific recognition site at the surface of the micelles was proved by isothermal titration microcalorimetry (ITC), using the BclA lectin (from Burkholderia cenocepacia), which interacts selectively with alpha-D-mannopyranoside derivatives. The thermodynamic parameters of the lectin/mannose interaction were extracted from the ITC data. These colloidal systems have great potential for drug targeting and vaccine delivery systems.     

Synthesis and characterization of star poly(epsilon-caprolactone)-b-poly(ethylene glycol) and poly(L-lactide)-b-poly(ethylene glycol) copolymers: evaluation as drug delivery carriers

Two types of 32 arm star polymers incorporating amphiphilic block copolymer arms have been synthesized and characterized. The first type, stPCL-PEG 32, is composed of a polyamidoamine (PAMAM) dendrimer as the core with radiating arms having poly(epsilon-caprolactone) (PCL) as an inner lipophilic block in the arm and poly(ethylene glycol) (PEG) as an outer hydrophilic block. The second type, stPLA-PEG 32, is similar but with poly(L-lactide) (PLA) as the inner lipophilic block. Characterization with SEC, (1)H NMR, FTIR, and DSC confirmed the structure of the polymers. Micelle formation by both star copolymers was studied by fluorescence spectroscopy. The stPCL-PEG 32 polymer exhibited unimolecular micelle behavior. It was capable of solubilizing hydrophobic molecules, such as pyrene, in aqueous solution, while not displaying a critical micelle concentration. In contrast, the association behavior of stPLA-PEG 32 in aqueous solution was characterized by an apparent critical micelle concentration of ca. 0.01 mg/mL. The hydrophobic anticancer drug etoposide can be encapsulated in the micelles formed from both polymers. Overall, the stPCL-PEG 32 polymer exhibited a higher etoposide loading capacity (up to 7.8 w/w % versus 4.3 w/w % for stPLA-PEG 32) as well as facile release kinetics and is more suitable as a potential drug delivery carrier.     

Metabolism of ethylene in olive leaves

Olive tree tissues are able to metabolize ethylene. This metabolism is inhibited by heat killing and carbon disulfide. Rubber stoppers usually employed to close the incubation vials release carbon disulfide, thereby modifying the values obtained for ethylene. The ethylene consumption rate has been found to be 9 nl/h.g, an intermediate value among the different plant tissues so far examined.     

Biomaterial films of Bombyx mori silk fibroin with poly(ethylene oxide)

Phase separation into controllable patterned microstructures was observed for Bombyx mori silkworm silk and poly(ethylene oxide) (PEO) (900000 g/mol) blends cast from solution. The evolution of the microstructures with increasing PEO volume fraction is strikingly similar to the progression of phases and microstructures observed with surfactants. The chemically patterned materials obtained provide engineerable biomaterial surfaces with predictable microscale features which can be used to create topographically patterned or chemically functionalized biomaterials. Solution blending was used to incorporate water-soluble PEO into silk to enhance elasticity and hydrophilicity. The sizes of the globule fibroin phase ranged from 2.1 +/- 0.5 to 18.2 +/- 2.1 microm depending on the ratio of silk/PEO. Optical microscopy and SEM analysis confirmed the micro-phase separation between PEO and silk. Surface properties were determined by XPS and contact angle. Methanol can be used to control the conformational transition of silk fibroin to the insoluble beta-sheet state. Subsequentially, the PEO can be easily extracted from the films with water to generate silk matrixes with definable porosity and enhanced surface roughness. These blend films formed from two biocompatible polymers provide potential new biomaterials for tissue engineering scaffolds.     

Association behavior of biotinylated and non-biotinylated poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate)

Biotinylated and non-biotinylated copolymers of poly(ethylene oxide) (PEO) and poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA) were synthesized by the atom transfer radical polymerization technique. The chemical compositions of the copolymers as determined by NMR are represented by PEO(113)PDEAEMA(70) and biotin-PEO(104)PDEAEMA(93), respectively. The aggregation behavior of these polymers in aqueous solutions at different pHs and ionic strengths was studied using a combination of potentiometric titration, dynamic light scattering, static light scattering, and transmission electron microscopy. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers form micelles at high pH with hydrodynamic radii (R(h)) of about 19 and 23 nm, respectively. At low pH, the copolymers are dispersed as unimers in solution with R(h) values of about 6-7 nm. However, at a physiological salt concentration (c(s)) of about 0.16 M NaCl and a pH of 7-8, the copolymers form large loosely packed Gaussian chains, which were not present at the low c(s) of 0.001 M NaCl. The critical micelle concentrations (cmc's) and the cytotoxicities of the copolymers were investigated to determine a suitable polymer concentration range for future biological applications. Both PEO-b-PDEAEMA and biotin-PEO-b-PDEAEMA diblock copolymers possess identical cmc values of about 0.0023 mg/g, while the cytotoxicity test indicated that the copolymers are not toxic up to 0.05 mg/g (>83% cell survival at this concentration).     

Novel biodegradable poly(disulfide amine)s for gene delivery with high efficiency and low cytotoxicity

Novel biodegradable poly(disulfide amine)s with defined structure, high transfection efficiency, and low cytotoxicity were designed and synthesized as nonviral gene delivery carriers. Michael addition between N, N'-cystaminebisacrylamide (CBA) and three N-Boc protected diamines ( N-Boc-1,2-diaminoethane, N-Boc-1,4-diaminobutane, and N-Boc-1,6-diaminohexane) followed by N-Boc deprotection under acidic condition resulted in final cationic polymers with disulfide bonds, tertiary amine groups in main chains, and pendant primary amine groups in side chains. Polymer structures were confirmed by 1H NMR, and their molecular weights were in the range 3.3-4.7 kDa with narrow polydispersity (1.12-1.17) as determined by size exclusion chromatography (SEC). Acid-base titration assay showed that the poly(disulfide amine)s possessed superior buffering capacity to branched PEI 25 kDa in the pH range 7.4-5.1, which may facilitate the escape of DNA from the endosomal compartment. Gel retardation assay demonstrated that significant polyplex dissociation was observed in the presence of 5.0 mM DTT within 1 h, suggesting rapid DNA release in the reduction condition such as cytoplasm due to the cleavage of disulfide bonds. Genetic transfections mediated by these poly(disulfide amine)s were side-chain spacer length dependent. The poly(disulfide amine) with a hexaethylene spacer, poly(CBA-DAH), had comparable transfection efficiency to bPEI 25 kDa in the tested cell lines, i.e., 293T cells, Hela cells, and NIH3T3 cells. This same poly(disulfide amine) mediated 7-fold higher luciferase expression than bPEI 25 kDa in C2C12 cells (mouse myoblast cell line), a cell line difficult to transfect with many cationic polymers. Furthermore, MTT assay indicated that all three poly(disulfide amine)s/pDNA polyplexes were significantly less toxic than bPEI/pDNA complexes.