An amino acid in the central catalytic domain of three retroviral integrases that affects target site selection in nonviral DNA

Integrase can insert retroviral DNA into almost any site in cellular DNA; however, target site preferences are noted in vitro and in vivo. We recently demonstrated that amino acid 119, in the alpha2 helix of the central domain of the human immunodeficiency virus type 1 integrase, affected the choice of nonviral target DNA sites. We have now extended these findings to the integrases of a nonprimate lentivirus and a more distantly related alpharetrovirus. We found that substitutions at the analogous positions in visna virus integrase and Rous sarcoma virus integrase changed the target site preferences in five assays that monitor insertion into nonviral DNA. Thus, the importance of this protein residue in the selection of nonviral target DNA sites is likely to be a general property of retroviral integrases. Moreover, this amino acid might be part of the cellular DNA binding site on integrase proteins.     

Nucleophile selection for the endonuclease activities of human, ovine, and avian retroviral integrases

Retroviral integrases catalyze four endonuclease reactions (processing, joining, disintegration, and nonspecific alcoholysis) that differ in specificity for the attacking nucleophile and target DNA sites. To assess how the two substrates of this enzyme affect each other, we performed quantitative analyses, in three retroviral systems, of the two reactions that use a variety of nucleophiles. The integrase proteins of human immuno- deficiency virus type 1, visna virus, and Rous sarcoma virus exhibited distinct preferences for water or other nucleophiles during site-specific processing of viral DNA and during nonspecific alcoholysis of nonviral DNA. Although exogenous alcohols competed with water as the nucleophile for processing, the alcohols stimulated nicking of nonviral DNA. Moreover, different nucleophiles were preferred when the various integrases acted on different DNA targets. In contrast, the nicking patterns were independent of whether integrase was catalyzing hydrolysis or alcoholysis and were not influenced by the particular exogenous alcohol. Thus, although the target DNA influenced the choice of nucleophile, the nucleophile did not affect the choice of target sites. These results indicate that interaction with target DNA is the critical step before catalysis and suggest that integrase does not reach an active conformation until target DNA has bound to the enzyme.     

Juxtaposition of two viral DNA ends in a bimolecular disintegration reaction mediated by multimers of human immunodeficiency virus type 1 or murine leukemia virus integrase.

Integration of retroviral DNA involves a coordinated joining of the two ends of a viral DNA molecule into precisely spaced sites on target DNA. In this study, we designed an assay that requires two separate oligonucleotides to be brought together via interactions between integrase promoters to form a "crossbones" substrate that mimics the integration intermediate. The crossbones substrate contains two viral DNA ends, each joined to one strand of target DNA and separated by a defined length of target DNA. We showed that purified integrases of human immunodeficiency virus type 1 (HIV-1) and murine leukemia virus (MLV) could mediate a concerted strand cleavage-ligation between the two half-substrates at one or both viral DNA joining sites (trans disintegration). Another major product, termed fold-back, resulted from an intramolecular attack on the phosphodiester bond at the viral-target DNA junction by the 3'-OH group of the same DNA molecule (cis disintegration). The activity of integrase on the crossbones substrate depended on the presence of viral DNA sequences. For trans disintegration, the optimal length of target DNA between the viral DNA joining sites of the crossbones substrate corresponded to the spacing between the staggered joints formed on two opposite strands of target DNA during retroviral DNA integration in vivo. The activity of integrases on crossbones did not require complementary base pairing between the two half-substrates, indicating that the half-substrates were juxtaposed solely through protein-DNA interactions. The crossbones assay, therefore, measures the ability of integrase to juxtapose two viral DNA ends, an activity which heretofore has been difficult to detect by using purified integrase in conventional assays. Certain mutant integrases that were otherwise inactive with the crossbones substrate could complement one another, indicating that no single protomer in the integrase multimer requires a complete set of functional domains either for catalytic activity or for juxtaposition of the two viral DNA ends by the active multimer.     

Integrase residues that determine nucleotide preferences at sites of HIV-1 integration: implications for the mechanism of target DNA binding

Retroviruses favor target-DNA (tDNA) distortion and particular bases at sites of integration, but the mechanism underlying HIV-1 selectivity is unknown. Crystal structures revealed a network of prototype foamy virus (PFV) integrase residues that distort tDNA: Ala188 and Arg329 interact with tDNA bases, while Arg362 contacts the phosphodiester backbone. HIV-1 integrase residues Ser119, Arg231, and Lys258 were identified here as analogs of PFV integrase residues Ala188, Arg329 and Arg362, respectively. Thirteen integrase mutations were analyzed for effects on integrase activity in vitro and during virus infection, yielding a total of 1610 unique HIV-1 integration sites. Purine (R)/pyrimidine (Y) dinucleotide sequence analysis revealed HIV-1 prefers the tDNA signature (0)RYXRY(4), which accordingly favors overlapping flexible dinucleotides at the center of the integration site. Consistent with roles for Arg231 and Lys258 in sequence specific and non-specific binding, respectively, the R231E mutation altered integration site nucleotide preferences while K258E had no effect. S119A and S119T integrase mutations significantly altered base preferences at positions −3 and 7 from the site of viral DNA joining. The S119A preference moreover mimicked wild-type PFV selectivity at these positions. We conclude that HIV-1 IN residue Ser119 and PFV IN residue Ala188 contact analogous tDNA bases to effect virus integration.     

Nonspecific alcoholysis, a novel endonuclease activity of human immunodeficiency virus type 1 and other retroviral integrases.

Retroviral integrase (IN) exhibits a previously unrecognized endonuclease activity which we have termed nonspecific alcoholysis. This action occurred at every position in nonviral DNA sequences except those near 5' ends and is clearly distinguished from, and was not predicted by, the site-specific alcoholysis activity previously described for IN at the processing site near viral DNA termini. The integrases of human immunodeficiency virus type 1, visna virus, and Rous sarcoma virus exhibited different target site preferences in this new assay. The isolated central domain of human immunodeficiency virus type 1 IN preferred the same sites as the full-length protein. Nonspecific alcoholysis may provide insights into the structure and function of IN and other endonucleases and suggests that stimulators of some activities possessed by retroviral enzymes should be sought as antiviral agents.     

Role of the nonspecific DNA-binding region and alpha helices within the core domain of retroviral integrase in selecting target DNA sites for integration

Retroviral integrase plays an important role in choosing host chromosomal sites for integration of the cDNA copy of the viral genome. The domain responsible for target site selection has been previously mapped to the central core of the protein (amino acid residues 49-238). Chimeric integrases between human immunodeficiency virus type 1 (HIV-1) and feline immunodeficiency virus (FIV) were prepared to examine the involvement of a nonspecific DNA-binding region (residues 213-266) and certain alpha helices within the core domain in target site selection. Determination of the distribution and frequency of integration events of the chimeric integrases narrowed the target site-specifying motif to within residues 49-187 and showed that alpha 3 and alpha 4 helices (residues 123-166) were not involved in target site selection. Furthermore, the chimera with the alpha 2 helix (residues 118-121) of FIV identity displayed characteristic integration events from both HIV-1 and FIV integrases. The results indicate that the alpha 2 helix plays a role in target site preference as either part of a larger or multiple target site-specifying motif.     

Characterization of the functional domains of human foamy virus integrase using chimeric integrases

Retroviral integrases insert viral DNA into target DNA. In this process they recognize their own DNA specifically via functional domains. In order to analyze these functional domains, we constructed six chimeric integrases by swapping domains between HIV-1 and HFV integrases, and two point mutants of HFV integrase. Chimeric integrases with the central domain of HIV-1 integrase had strand transfer and disintegration activities, in agreement with the idea that the central domain determines viral DNA specificity and has catalytic activity. On the other hand, chimeric integrases with the central domain of HFV integrase did not have any enzymatic activity apart from FFH that had weak disintegration activity, suggesting that the central domain of HFV integrase was defective catalytically or structurally. However, these inactive chimeras were efficiently complemented by the point mutants (D164A and E200A) of HFV integrase, indicating that the central domain of HFV integrase possesses potential enzymatic activity but is not able to recognize viral or target DNA without the help of its homologous N-terminal and C-terminal domains.     

Irreversible inhibition of human immunodeficiency virus type 1 integrase by dicaffeoylquinic acids

Human immunodeficiency virus type 1 (HIV-1) and other retroviruses require integration of a double-stranded DNA copy of the RNA genome into the host cell chromosome for productive infection. The viral enzyme, integrase, catalyzes the integration of retroviral DNA and represents an attractive target for developing antiretroviral agents. We identified several derivatives of dicaffeoylquinic acids (DCQAs) that inhibit HIV-1 replication in tissue culture and catalytic activities of HIV-1 integrase in vitro. The specific step at which DCQAs inhibit the integration in vitro and the mechanism of inhibition were examined in the present study. Titration experiments with different concentrations of HIV-1 integrase or DNA substrate found that the effect of DCQAs was exerted on the enzyme and not the DNA. In addition to HIV-1, DCQAs also inhibited the in vitro activities of MLV integrase and truncated variants of feline immunodeficiency virus integrase, suggesting that these compounds interacted with the central core domain of integrase. The inhibition on retroviral integrases was relatively specific, and DCQAs had no effect on several other DNA-modifying enzymes and phosphoryltransferases. Kinetic analysis and dialysis experiments showed that the inhibition of integrase by DCQAs was irreversible. The inhibition did not require the presence of a divalent cation and was unaffected by preassembling integrase onto viral DNA. The results suggest that the irreversible inhibition by DCQAs on integrase is directed toward conserved amino acid residues in the central core domain during catalysis.     

Integrase of Mason-Pfizer monkey virus

The gene encoding an integrase of Mason-Pfizer monkey virus (M-PMV) is located at the 3'-end of the pol open reading frame. The M-PMV integrase has not been previously isolated and characterized. We have now cloned, expressed, isolated, and characterized M-PMV integrase and compared its activities and primary structure with those of HIV-1 and other retroviral integrases. M-PMV integrase prefers untranslated 3'-region-derived long-terminal repeat sequences in both the 3'-processing and the strand transfer activity assays. While the 3'-processing reaction catalyzed by M-PMV integrase was significantly increased in the presence of Mn(2+) and Co(2+) and was readily detectable in the presence of Mg(2+) and Ni(2+) cations, the strand transfer activity was strictly dependent only on Mn(2+). M-PMV integrase displays more relaxed substrate specificity than HIV-1 integrase, catalyzing the cleavage and the strand transfer of M-PMV and HIV-1 long-terminal repeat-derived substrates with similar efficiency. The structure-based sequence alignment of M-PMV, HIV-1, SIV, and ASV integrases predicted critical amino acids and motifs of M-PMV integrase for metal binding, interaction with nucleic acids, dimerization, protein structure maintenance and function, as well as for binding of human immunodeficiency virus type 1 and Rous avian sarcoma virus integrase inhibitors 5-CI-TEP, DHPTPB and Y-3.     

Requirement of active human immunodeficiency virus type 1 integrase enzyme for productive infection of human T-lymphoid cells.

The human immunodeficiency virus type 1 (HIV-1) integrase enzyme exhibits significant amino acid sequence conservation with integrase proteins of other retroviruses. We introduced specific amino acid substitutions at a number of the conserved residue positions of recombinant HIV-1 integrase. Some of these substitutions resulted in proteins which were not able to be purified in the same manner as the wild-type enzyme, and these were not studied further. The remaining mutant enzymes were assessed for their abilities to perform functions characteristic of the integrase protein. These included specific removal of the terminal dinucleotides from oligonucleotide substrates representative of the viral U5-long terminal repeat, nonspecific cleavage of oligonucleotide substrates, and mediation of the strand transfer (integration) reaction. Substitution at position 43, within the protein's zinc finger motif region, resulted in an enzyme with reduced specificity for cleavage of the terminal dinucleotide. In addition, a double substitution of aspartic acid and glutamine for valine and glutamic acid, respectively, at positions 151 and 152 within the D,D(35)E motif region rendered the integrase protein inactive for all of its functions. The introduction of this double substitution into an infectious HIV-1 provirus yielded a mutant virus that was incapable of productively infecting human T-lymphoid cells in culture.     

Residues critical for retroviral integrative recombination in a region that is highly conserved among retroviral/retrotransposon integrases and bacterial insertion sequence transposases.

Our comparison of deduced amino acid sequences for retroviral/retrotransposon integrase (IN) proteins of several organisms, including Drosophila melanogaster and Schizosaccharomyces pombe, reveals strong conservation of a constellation of amino acids characterized by two invariant aspartate (D) residues and a glutamate (E) residue, which we refer to as the D,D(35)E region. The same constellation is found in the transposases of a number of bacterial insertion sequences. The conservation of this region suggests that the component residues are involved in DNA recognition, cutting, and joining, since these properties are shared among these proteins of divergent origin. We introduced amino acid substitutions in invariant residues and selected conserved and nonconserved residues throughout the D,D(35)E region of Rous sarcoma virus IN and in human immunodeficiency virus IN and assessed their effect upon the activities of the purified, mutant proteins in vitro. Changes of the invariant and conserved residues typically produce similar impairment of both viral long terminal repeat (LTR) oligonucleotide cleavage referred to as the processing reaction and the subsequent joining of the processed LTR-based oligonucleotides to DNA targets. The severity of the defects depended upon the site and the nature of the amino acid substitution(s). All substitutions of the invariant acidic D and E residues in both Rous sarcoma virus and human immunodeficiency virus IN dramatically reduced LTR oligonucleotide processing and joining to a few percent or less of wild type, suggesting that they are essential components of the active site for both reactions.(ABSTRACT TRUNCATED AT 250 WORDS)     

A substitution in rous sarcoma virus integrase that separates its two biologically relevant enzymatic activities

Retroviral integrase prepares viral DNA for integration by removing 2 nucleotides from each end of unintegrated DNA in a reaction referred to as processing. However, it has been known since the processing assay was first described that avian integrases frequently nick 3 nucleotides, as well as 2 nucleotides, from viral DNA ends when reaction mixtures contain Mn2+. We now report that specificity for the biologically relevant "-2" site is enhanced when the serine at amino acid 124 of Rous sarcoma virus (RSV) integrase is replaced by alanine, valine, glycine, lysine, or aspartate. The protein with a serine-to-aspartate substitution exhibited especially high fidelity for the correct site, as evidenced by a ratio of -2 nicks to -3 nicks that was more than 40-fold greater than that for the wild-type enzyme in reactions with Mn2+. Even with Mg2+, the substituted proteins exhibited greater specificity than the wild type, especially the S124D protein. Moreover, this protein was more efficient than the wild type at processing viral DNA ends. Unexpectedly, however, the S124D protein was significantly impaired at catalyzing the insertion of viral DNA ends in reactions with Mn2+ and joining was undetectable in reactions with Mg2+. Thus, the S124D protein has separated the processing and joining activities of integrase. Similar results were found for human immunodeficiency virus integrase with the analogous substitution. No proteins with comparable properties have been described. Moreover, RSV virions containing integrase with the S124D mutation were unable to replicate in cell cultures. Together, these data suggest that integrase has evolved to have submaximal processing activity so that it can also catalyze DNA joining.     

Molecular mechanisms of retroviral integration site selection

Retroviral replication proceeds through an obligate integrated DNA provirus, making retroviral vectors attractive vehicles for human gene-therapy. Though most of the host cell genome is available for integration, the process of integration site selection is not random. Retroviruses differ in their choice of chromatin-associated features and also prefer particular nucleotide sequences at the point of insertion. Lentiviruses including HIV-1 preferentially integrate within the bodies of active genes, whereas the prototypical gammaretrovirus Moloney murine leukemia virus (MoMLV) favors strong enhancers and active gene promoter regions. Integration is catalyzed by the viral integrase protein, and recent research has demonstrated that HIV-1 and MoMLV targeting preferences are in large part guided by integrase-interacting host factors (LEDGF/p75 for HIV-1 and BET proteins for MoMLV) that tether viral intasomes to chromatin. In each case, the selectivity of epigenetic marks on histones recognized by the protein tether helps to determine the integration distribution. In contrast, nucleotide preferences at integration sites seem to be governed by the ability for the integrase protein to locally bend the DNA duplex for pairwise insertion of the viral DNA ends. We discuss approaches to alter integration site selection that could potentially improve the safety of retroviral vectors in the clinic.     

Retroviral DNA integration: reaction pathway and critical intermediates

The key DNA cutting and joining steps of retroviral DNA integration are carried out by the viral integrase protein. Structures of the individual domains of integrase have been determined, but their organization in the active complex with viral DNA is unknown. We show that HIV-1 integrase forms stable synaptic complexes in which a tetramer of integrase is stably associated with a pair of viral DNA ends. The viral DNA is processed within these complexes, which go on to capture the target DNA and integrate the viral DNA ends. The joining of the two viral DNA ends to target DNA occurs sequentially, with a stable intermediate complex in which only one DNA end is joined. The integration product also remains stably associated with integrase and likely requires disassembly before completion of the integration process by cellular enzymes. The results define the series of stable nucleoprotein complexes that mediate retroviral DNA integration.     

Substrate features important for recognition and catalysis by human immunodeficiency virus type 1 integrase identified by using novel DNA substrates.

The integrase encoded by human immunodeficiency virus type 1 (HIV-1) is required for integration of viral DNA into the host cell chromosome. In vitro, integrase mediates a concerted cleavage-ligation reaction (strand transfer) that results in covalent attachment of viral DNA to target DNA. With a substrate that mimics the strand transfer product, integrase carries out disintegration, the reverse of the strand transfer reaction, resolving this integration intermediate into its viral and target DNA parts. We used a set of disintegration substrates to study the catalytic mechanism of HIV-1 integrase and the interaction between the protein and the viral and target DNA sequence. One substrate termed dumbbell consists of a single oligonucleotide that can fold to form a structure that mimics the integration intermediate. Kinetic analysis using the dumbbell substrate showed that integrase turned over, establishing that HIV-1 integrase is an enzyme. Analysis of the disintegration activity on the dumbbell substrate and its derivatives showed that both the viral and target DNA parts of the molecule were required for integrase recognition. Integrase recognized target DNA asymmetrically: the target DNA upstream of the viral DNA joining site played a much more important role than the downstream target DNA in protein-DNA interaction. The site of transesterification was determined by both the DNA sequence of the viral DNA end and the structure of the branched substrate. Using a series of disintegration substrates with various base modifications, we found that integrase had relaxed structural specificity for the hydroxyl group used in transesterification and could tolerate distortion of the double-helical structure of these DNA substrates.     

A Symmetric Region of the HIV-1 Integrase Dimerization Interface Is Essential for Viral Replication

HIV-1 integrase (IN) is an important target for contemporary antiretroviral drug design research. Historically, efforts at inactivating the enzyme have focused upon blocking its active site. However, it has become apparent that new classes of allosteric inhibitors will be necessary to advance the antiretroviral field in light of the emergence of viral strains resistant to contemporary clinically used IN drugs. In this study we have characterized the importance of a close network of IN residues, distant from the active site, as important for the obligatory multimerization of the enzyme and viral replication as a whole. Specifically, we have determined that the configuration of six residues within a highly symmetrical region at the IN dimerization interface, composed of a four-tiered aromatic interaction flanked by two salt bridges, significantly contributes to proper HIV-1 replication. Additionally, we have utilized a quantitative luminescence assay to examine IN oligomerization and have determined that there is a very low tolerance for amino acid substitutions along this region. Even conservative residue substitutions negatively impacted IN multimerization, resulting in an inactive viral enzyme and a non-replicative virus. We have shown that there is a very low tolerance for amino acid variation at the symmetrical dimeric interface region characterized in this study, and therefore drugs designed to target the amino acid network detailed here could be expected to yield a significantly reduced number of drug-resistant escape mutations compared to contemporary clinically-evaluated antiretrovirals.