Nucleotide sequence of the FNR-regulated fumarase gene (fumB) of Escherichia coli K-12

The nucleotide sequence of a 3,162-base-pair (bp) segment of DNA containing the FNR-regulated fumB gene, which encodes the anaerobic class I fumarase (FUMB) of Escherichia coli, was determined. The structural gene was found to comprise 1,641 bp, 547 codons (excluding the initiation and termination codons), and the gene product had a predicted Mr of 59,956. The amino acid sequence of FUMB contained the same number of residues as did that of the aerobic class I fumarase (FUMA), and there were identical amino acids at all but 56 positions (89.8% identity). There was no significant similarity between the class I fumarases and the class II enzyme (FUMC) except in one region containing the following consensus: Gly-Ser-Xxx-Ile-Met-Xxx-Xxx-Lys-Xxx-Asn. Some of the 56 amino acid substitutions must be responsible for the functional preferences of the enzymes for malate dehydration (FUMB) and fumarate hydration (FUMA). Significant similarities between the cysteine-containing sequence of the class I fumarases (FUMA and FUMB) and the mammalian aconitases were detected, and this finding further supports the view that these enzymes are all members of a family of iron-containing hydrolyases. The nucleotide sequence of a 1,142-bp distal sequence of an unidentified gene (genF) located upstream of fumB was also defined and found to encode a product that is homologous to the product of another unidentified gene (genA), located downstream of the neighboring aspartase gene (aspA).     

Cloning of the aspartase gene (aspA) of Escherichia coli

The aspartase gene (aspA) of Escherichia coli has been isolated in two plasmids, pGS73 and pGS94, which contain segments of bacterial DNA (12.5 and 2.8 kb, respectively) inserted into the tet gene of the vector pBR322. The plasmids were constructed by sequential sub-cloning from a larger ColE1-frd+ hybrid plasmid. The location of the aspA gene confirmed predictions based on a correlation between the genetic and restriction maps of the corresponding region. The aspartase activities of plasmid-containing aspA mutants were amplified four- to sixfold relative to aspA+ parental strains. The aspA gene product was tentatively identified as a polypeptide of Mr 55 000, which is somewhat larger than previous estimates (Mr 45000 to 48000) for aspartase.     

The fumarase genes of Escherichia coli: location of the fumB gene and discovery of a new gene (fumC)

The fumB gene of Escherichia coli, which complements the fumarase deficiency of a fumA mutant when present in multiple copies, has been located at 93.5 min in the E. coli linkage map and its product has been identified as a polypeptide of 61 kDal. Four overlapping ColE1-fumB+ plasmids representing a continuous segment of 23.3 kb of bacterial DNA have been isolated from the Clarke-Carbon E. coli gene bank and the location of the fumB gene relative to the restriction map and the adjacent mel operon has been defined. Hybridization studies have shown that the fumB gene is homologous to the fumA gene, which complements the fumA1 mutation in single and multi-copy situations, and encodes an analogous 61 kDal product formerly regarded as the E. coli fumarase. The hybridization studies also showed that the Bacillus subtilis fumarase gene (citG) is homologous to an independent gene, fumC (formerly g48), which lies adjacent to the fumA gene at 35.5 min in the E. coli linkage map. The N-terminal sequences of the citG and fumC products exhibit a 51% identity over 88 residues. It is possible that the fumC and citG genes are fumarase structural genes of E. coli and B. subtilis, and that the fumA gene may encode a differentially-regulated fumarase or be a positive regulator gene which is essential for the expression of fumC (but not citG). If so, the fumB gene may encode a related enzyme or activator that can replace the fumA function when amplified.     

Cloning and nucleotide sequence of the aspartase gene of Escherichia coli W.

The aspA gene of Escherichia coli W which encodes aspartase was cloned into the plasmid vector pBR322. The nucleotide sequences of aspA and its flanking regions were determined. The aspA gene encodes a protein with a molecular weight of 52,224 consisted of 477 amino acid residues. The amino acid sequence of the protein predicted from the nucleotide sequence was consistent with those of the NH2- and COOH-terminal regions and also with the amino acid composition of the purified aspartase determined previously. Potential promoter and terminator sequences for aspA were also found in the determined sequence.     

Cloning and nucleotide sequence of the aspartase gene of Pseudomonas fluorescens

The aspartase gene (aspA) of Pseudomonas fluorescens was cloned and the nucleotide sequence of the 2,066-base-pair DNA fragment containing the aspA gene was determined. The amino acid sequence of the protein deduced from the nucleotide sequence was confirmed by N- and C-terminal sequence analysis of the purified enzyme protein. The deduced amino acid composition also fitted the previous amino acid analysis results well (Takagi et al. (1984) J. Biochem. 96, 545-552). These results indicate that aspartase of P. fluorescens consists of four identical subunits with a molecular weight of 50,859, composed of 472 amino acid residues. The coding sequence of the gene was preceded by a potential Shine-Dalgarno sequence and by a few promoter-like structures. Following the stop codon there was a structure which is reminiscent of the Escherichia coli rho-independent terminator. The G + C content of the coding sequence was found to be 62.3%. Inspection of the codon usage for the aspA gene revealed as high as 80.0% preference for G or C at the third codon position. The deduced amino acid sequence was 56.3% homologous with that of the enzyme of E. coli W (Takagi et al. (1985) Nucl. Acids Res. 13, 2063-2074). Cys-140 and Cys-430 of the E. coli enzyme, which had been assigned as functionally essential (Ida & Tokushige (1985) J. Biochem. 98, 793-797), were substituted by Ala-140 and Ala-431, respectively, in the P. fluorescens enzyme.     

Two biochemically distinct classes of fumarase in Escherichia coli

Biochemical studies with strains of Escherichia coli that are amplified for the products of the three fumarase genes, fumA (FUMA), fumB (FUMB) and fumC (FUMC), have shown that there are two distinct classes of fumarase. The Class I enzymes include FUMA, FUMB, and the immunologically related fumarase of Euglena gracilis. These are characteristically thermolabile dimeric enzymes containing identical subunits of Mr 60,000. FUMA and FUMB are differentially regulated enzymes that function in the citric acid cycle (FUMA) or to provide fumarate as an anaerobic electron acceptor (FUMB), and their affinities for fumarate and L-malate are consistent with these roles. The Class II enzymes include FUMC, and the fumarases of Bacillus subtilis, Saccharomyces cerevisiae and mammalian sources. They are thermostable tetrameric enzymes containing identical subunits Mr 48,000-50,000. The Class II fumarases share a high degree of sequence identity with each other (approx. 60%) and with aspartase (approx. 38%) and argininosuccinase (approx. 15%), and it would appear that these are all members of a family of structurally related enzymes. It is also suggested that the Class I enzymes may belong to a wider family of iron-dependent carboxylic acid hydro-lyases that includes maleate dehydratase and aconitase. Apart from one region containing a Gly-Ser-X-X-Met-X-X-Lys-X-Asn consensus sequence, no significant homology was detected between the Class I and Class II fumarases.     

Nucleotide sequence of the gene encoding the GMP reductase of Escherichia coli K12.

(1) The nucleotide sequence of a 1991 bp segment of DNA that expresses the GMP reductase (guaC) gene of Escherichia coli K12 was determined. (2) This gene comprises 1038 bp, 346 codons (including the initiation codon but excluding the termination codon), and it encodes a polypeptide of Mr 37,437 which is in good agreement with previous maxicell studies. (3) The sequence contains a putative promoter 102 bp upstream of the translational start codon, and this is immediately followed by a (G + C)-rich discriminator sequence suggesting that guaC expression may be under stringent control (4) The GMP reductase exhibits a high degree of sequence identity (34%) with IMP dehydrogenase (the guaB gene product) indicative of a close evolutionary relationship between the salvage pathway and the biosynthetic enzymes, GMP reductase and IMP dehydrogenase, respectively. (5) A single conserved cysteine residue, possibly involved in IMP binding to IMP dehydrogenase, was located within a region that possesses some of the features of a nucleotide binding site. (6) The IMP dehydrogenase polypeptide contains an internal segment of 123 amino acid residues that has no counterpart in GMP reductase and may represent an independent folding domain flanked by (alanine + glycine)-rich interdomain linkers.     

Increased production of aspartase in Escherichia coli K-12 by use of stabilized aspA recombinant plasmid.

Recombinant plasmid pYT471, which consists of the aspartase gene (aspA) and the multicopy vector pBR322, was lost from cells of Escherichia coli K-12 at high frequencies in medium in which aspartase was abundantly formed due to release from catabolite repression. This plasmid loss was not completely prevented by the selective pressure of antibiotic addition. To increase the stability of the aspA plasmid, pNK101 (pBR322::aspA-par) was constructed by using the partition locus (par) derived from the low-copy vector pSC101. In E. coli K-12 cells, pNK101 was lost at a frequency as low as 0.4% per cell generation in nonselective medium, whereas pYT471 was lost at a frequency as high as 8.5%. Cells harboring this stable plasmid produced ca. 30-fold more aspartase than did cells harboring the unstable plasmid after 30 cell generations. Thus, we could increase aspartase production by stabilizing the aspA recombinant plasmid.     

Increased production of aspartase in Escherichia coli K-12 by use of stabilized aspA recombinant plasmid

Recombinant plasmid pYT471, which consists of the aspartase gene (aspA) and the multicopy vector pBR322, was lost from cells of Escherichia coli K-12 at high frequencies in medium in which aspartase was abundantly formed due to release from catabolite repression. This plasmid loss was not completely prevented by the selective pressure of antibiotic addition. To increase the stability of the aspA plasmid, pNK101 (pBR322::aspA-par) was constructed by using the partition locus (par) derived from the low-copy vector pSC101. In E. coli K-12 cells, pNK101 was lost at a frequency as low as 0.4% per cell generation in nonselective medium, whereas pYT471 was lost at a frequency as high as 8.5%. Cells harboring this stable plasmid produced ca. 30-fold more aspartase than did cells harboring the unstable plasmid after 30 cell generations. Thus, we could increase aspartase production by stabilizing the aspA recombinant plasmid.     

Cloning, sequencing, and mapping of the bacterioferritin gene (bfr) of Escherichia coli K-12.

The bacterioferritin (BFR) of Escherichia coli K-12 is an iron-storage hemoprotein, previously identified as cytochrome b1. The bacterioferritin gene (bfr) has been cloned, sequenced, and located in the E. coli linkage map. Initially a gene fusion encoding a BFR-lambda hybrid protein (Mr 21,000) was detected by immunoscreening a lambda gene bank containing Sau3A restriction fragments of E. coli DNA. The bfr gene was mapped to 73 min (the str-spc region) in the physical map of the E. coli chromosome by probing Southern blots of restriction digests of E. coli DNA with a fragment of the bfr gene. The intact bfr gene was then subcloned from the corresponding lambda phage from the gene library of Kohara et al. (Y. Kohara, K. Akiyama, and K. Isono, Cell 50:495-508, 1987). The bfr gene comprises 474 base pairs and 158 amino acid codons (including the start codon), and it encodes a polypeptide having essentially the same size (Mr 18,495) and N-terminal sequence as the purified protein. A potential promoter sequence was detected in the 5' noncoding region, but it was not associated with an "iron box" sequence (i.e., a binding site for the iron-dependent Fur repressor protein). BFR was amplified to 14% of the total protein in a bfr plasmid-containing strain. An additional unidentified gene (gen-64), encoding a relatively basic 64-residue polypeptide and having the same polarity as bfr, was detected upstream of the bfr gene.     

Characterization of multiple fumarase proteins in Escherichia coli

Two different types of fumarase were found in sonic extracts of Escherichia coli; one required Fe-S for the enzyme activity, and the other did not. When the cells were grown without aeration, the Fe-S-independent enzyme occupied over 80% of the overall fumarase activity. Highly purified Fe-S-independent enzyme was suggested to be composed of four subunits (Mr = 48 kDa) by SDS-polyacrylamide gel electrophoresis and gel filtration. Amino acid and N-terminal sequence analyses supported the possibility that the enzyme is a product of fumC gene (FUMC). In aerobically grown cells, however, the content of FUMC was low and the Fe-S-dependent fumarase occupied over 80% of the overall activity. The Fe-S-dependent enzyme appeared to be labile and the activity was rapidly lost during purification. Although the spontaneous inactivation was previously ascribed to thermal lability (S.A. Woods & J.R. Guest (1987) FEMS Microbiol. Lett. 48, 219), the activity could be restored by anaerobic incubation with ferrous ions and SH-compounds.     

The pyruvate dehydrogenase complex of Escherichia coli K12. Nucleotide sequence encoding the pyruvate dehydrogenase component

The nucleotide sequence of a 3780-base-pair segment of DNA containing the aceE gene encoding the pyruvate dehydrogenase component (E1) of the pyruvate dehydrogenase complex of Escherichia coli, has been determined by the dideoxy chain-termination method. The aceE structural gene comprises 2655 base pairs (885 codons, excluding the initiation codon AUG), it is preceded by a good ribosome binding site and several potential RNA polymerase binding sites. Its polarity and location in the restriction map of the corresponding segment of DNA are consistent with it being the proximal gene in the ace operon, as defined in previous genetic and post-infection labelling studies. The relative molecular mass (99474), composition (885 amino acids), amino-terminal residue and carboxy-terminal sequence predicted from the nucleotide sequence are in excellent agreement with published information obtained from studies with the purified pyruvate dehydrogenase component (E1). The nucleotide sequence also contains a second gene (gene A) situated upstream of the aceE gene. It appears to be an independent gene containing 708 base pairs (236 codons) and encoding a weakly expressed product (protein A; Mr = 27049) of unknown function.     

Optimization of culture media and conditions for cultivating Erwinia sp., a producer of fumarase and aspartase

Mathematical methods of experimental design were used to determine the optimal concentrations of nutrient medium components, aeration conditions, and pH providing for the maximum biomass yields, as well as fumarase and aspartase activities, during submerged cultivation of Erwinia sp. The data showed that different concentrations of carbon source (molasses) and pH of the nutrient medium were required to reach the maximum yields of fumarase and aspartase. Calculations suggested that the combination of these optimized factors would result in 3.2-, 3.4-, and 3.8-fold increases in the Erwinia sp. biomass, aspartase activity, and fumarase activity yields, respectively. The experimental data were consistent with these estimates to a 80% accuracy.     

Optimization of the medium and conditions for cultivatingErwinia sp., a producer of fumarase and aspartase

Mathematical methods of experimental design were used to determine the optimal concentrations of nutrient medium components, aeration conditions, and pH providing for the maximum biomass yields, as well as fumarase and aspartase activities, during submerged cultivation ofErwinia sp. The data showed that different concentrations of carbon source (molasses) and pH of the nutrient medium were required to reach the maximum yields of fumarase and aspartase. Calculations suggested that the combination of these optimized factors would result in 3.2-, 3.4-, and 3.8-fold increases in theErwinia sp. biomass, aspartase activity, and fumarase activity yields, respectively. The experimental data were consistent with these estimates to 80% accuracy.     

Crystal structure of thermostable aspartase from Bacillus sp. YM55-1: structure-based exploration of functional sites in the aspartase family

The crystal structure of the thermostable aspartase from Bacillus sp. YM55-1 has been solved and refined for 2.5A resolution data with an R-factor of 22.1%. The present enzyme is a homotetramer with subunits composed of three domains. It exhibits no allosteric effects, in contrast to the Escherichia coli aspartase, which is activated by divalent metal cation and L-aspartate, but is four-times more active than the E.coli enzyme. The overall folding of the present enzyme subunit is similar to those of the E.coli aspartase and the E.coli fumarase C, both of which belong to the same superfamily as the present enzyme. A local structural comparison of these three enzymes revealed seven structurally different regions. Five of the regions were located around putative functional sites, suggesting the involvement of these regions into the functions characteristic of the enzymes. Of these regions, the region of Gln96-Gly100 is proposed as a part of the recognition site of the alpha-amino group in L-aspartate for aspartase and the hydroxyl group in L-malate for fumarase. The region of Gln315-Gly323 is a flexible loop with a well-conserved sequence that is suggested to be involved in the catalytic reaction. The region of Lys123-Lys128 corresponds to a part of the putative activator-binding site in the E.coli fumarase C. The region in the Bacillus aspartase, however, adopts a main-chain conformation that prevents the activator binding. The regions of Gly228-Glu241 and Val265-Asp272, which form a part of the active-site wall, are suggested to be involved in the allosteric activation of the E.coli aspartase by the binding of the metal ion and the activator. Moreover, an increase in the numbers of intersubunit hydrogen bonds and salt-bridges is observed in the Bacillus aspartase relative to those of the E.coli enzyme, implying a contribution to the thermostability of the present aspartase.     

Complete nucleotide sequence of the fumarase gene (citG) of Bacillus subtilis 168.

The nucleotide sequence of a 2.14 kb fragment of Bacillus subtilis DNA containing the citG gene encoding fumarase was determined using the dideoxy chain termination method. The citG coding region of 1392 base pairs (464 codons) was identified, and the deduced Mr (50425) is in good agreement with that of the protein identified from expression in Escherichia coli maxicells. There is no sequence homology between the B. subtilis and E. coli fumarases. Overlapping potential promoter sequences have been identified for sigma 28, sigma 37 and sigma 55 RNA polymerase holoenzymes. The DNA fragment also contains the proximal part of the gerA locus, responsible for L-alanine-sensitive spore germination.