Sclerotium rolfsii scleroglucan: the promising behavior of a natural polysaccharide as a drug delivery vehicle, suspension stabilizer and emulsifier

Gel matrices of scleroglucans from Sclerotium rolfsii ATCC 201126 (EPS I and EPS II, from 48-h and 72-h fermentations, respectively) were evaluated on their release kinetics of theophylline (Th). Equivalent polymer (2%, w/w) and Th (0.2%, w/w) concentrations showed almost coincident drug release patterns, independently of polymer molecular weight or the microstructural properties of gel matrices. Dynamic rheological studies of scleroglucan hydrogel structures (storage, G', and loss, G', moduli) indicated a solid-like behavior. Differences on pore size dimensions (EPS I=20 microm and EPS II=7 microm) were in accordance to the differences in G' (EPS I=113 Pa and EPS II=161 Pa), a fact likely related to variations in the cross-linking density of polymer networks. Compared to already known biopolymers, EPS I and EPS II at 0.5 g/L showed a good dispersing ability against particulate suspensions of activated charcoal, bentonite, CaCO(3), celite and quartz powder. Emulsifying ability of both EPSs at 2g/L was high (E=56-60%) when tested with kerosene, moderate ( approximately 30%) with hexadecane, and negligible in the presence of olive oil-in-water emulsions.     

Thermoreversible-mucoadhesive Gel for nasal delivery of sumatriptan

The purpose of the present study was to develop intranasal delivery systems of sumatriptan using thermoreversible polymer Pluronic F127 (PF 127) and mucoadhesive polymer Carbopol 934P (C934P). Formulations were modulated so as to have gelation temperature below 34°C to ensure gelation at physiological temperature after intranasal administration. Gelation temperature was determined by physical appearance as well as by rheological measurement. The gelation temperatures of the formulations decreased by addition of increasing concentrations of Carbopol (ie, from 29°C for 18% PF127 to 23.9°C for 18% PF127, 0.5% Carbopol). The mucoadhesive force in terms of detachment stress, determined using sheep nasal mucosal membrane, increased with increasing concentration of Carbopol. The results of in vitro drug permeation studies across sheep nasal mucosa indicate that effective permeation coefficient could be significantly increased by using in situ gelling formulation with Carbopol concentration 0.3% or greater. Finally, histopathological examination did not detect any damage during in vitro permeation studies. In conclusion, the PF 127 gel formulation of sumatriptan, with in situ gelling and mucoadhesive properties with increased permeation rate is promising for prolonging nasal residence time and thereby nasal absorption. Published: August 4, 2006     

Effect of hydrophobic modification on rheological and swelling features during chemical gelation of aqueous polysaccharides

Rheological characteristics during chemical gelation with the cross-linker ethylene glycol diglycidyl ether (EGDE) of semidilute aqueous solutions of hydroxyethylcellulose (HEC) and of two hydrophobically modified analogues (HM-1-HEC and HM-2-HEC) are reported. In addition, rheological features of gelling samples (dextran and its hydrophobically modified analogue (HM-dextran)) of a different structure have been examined. Some swelling experiments on these gels in the postgel region are also reported. The gelation time of the hydroxyethylcellulose systems decreased with increasing cross-linker concentration, and incorporation of hydrophobic units of HEC resulted in a slower gelation. The time of gelation for the dextran system was only slightly affected by the incorporation of hydrophobic groups (HM-dextran). At the gel point, a power law frequency dependence of the dynamic storage modulus (G' proportional to omegan') and loss modulus (G' proportional to omegan') was observed for all gelling systems with n' = n' = n. The attachment of hydrophobic moieties on the dextran chains had virtually no impact on the value of n (n = 0.77), and the percolation model describes the incipient dextran gels. By increasing the number of hydrophobic groups of the HEC polymer, the value of n for the corresponding incipient gel drops significantly, and the value of the gel strength parameter increases strongly. Incorporation of hydrophobic units in the HEC chains promotes the formation of stronger incipient gels because of the contribution from the hydrophobic association effect. The frequency dependence of the complex viscosity reveals that all the investigated gels become more solidlike in the postgel domain. Far into the postgel region, the hydrophobicity of HEC plays a minor role for the strength of the gel network, whereas the values of the complex viscosity are significantly higher for HM-dextran than for the corresponding dextran gel. The swelling experiments on HEC, HM-1-HEC, and HM-2-HEC systems disclose that the degree of swelling of the postgels in water is quite different, depending on the relative distance from the gel point at which the cross-linker reaction is quenched. At a given distance from the gel point, the swelling of the HEC gel is less pronounced than for the corresponding hydrophobically modified samples. At this stage, the swelling of the HM-dextran gel is stronger than for the dextran gel.     

Rheological evidence of the gelation behavior of hyaluronan-gellan mixtures

It was found that solutions of calcium hyaluronate (CaHA) (0.1 to approximately 0.5 wt%) could form a gel by mixing with solutions of sodium type gellan (0.1 to approximately 0.5 wt%), although neither polymer by itself forms a gel at low concentrations (0.1 to approximately 0.5 wt% in this experiment). The rheological properties of CaHA-gellan mixtures were investigated by dynamic and steady shear measurements. Both storage shear modulus G' and loss shear modulus G' for CaHA-gellan mixtures increased with increasing time, and tended to an equilibrium value after 1 h. After reaching steady values of G' and G", the frequency dependence of G' and G' was observed. G' was always larger than G' in the accessible frequency range from 10(-2) to 10(2) rad/s. The effects of pH and calcium ions were examined. Gel formation of the mixtures was promoted by decreasing pH and adding from 0.01 to 0.1 M calcium ions, but excessive calcium ions weakened the gel.     

Rheological and structural properties of aqueous alginate during gelation via the Ugi multicomponent condensation reaction

Turbidity, structure, and rheological features during gelation via the Ugi multicomponent condensation reaction of semidilute solutions of alginate have been investigated at different polymer and cross-linker concentrations and reaction temperatures. The gelation time of the system decreased with increasing polymer and cross-linker concentrations, and a temperature rise resulted in a faster gelation. At the gel point, a power law frequency dependence of the dynamic storage modulus (G' proportional, variant omega(n)(')) and loss modulus (G' ' proportional, variant omega(n)(' ')) was observed for all gelling systems with n' = n' ' = n. By varying the cross-linker density at a fixed polymer concentration (2.2 wt %), the power law exponent is consistent with that predicted (0.7) from the percolation model. The value of n decreases with increasing polymer concentration, whereas higher temperatures give rise to higher values of n. The elastic properties of the gels continue to grow over a long time in the postgel region, and at later stages in the gelation process, a solidlike response is observed. The turbidity of the gelling system increases as the gel evolves, and this effect is more pronounced at higher cross-linker concentration. The small-angle neutron scattering results reveal large-scale inhomogeneities of the gels, and this effect is enhanced as the cross-linker density increases. The structural, turbidity, and rheological features were found to change over an extended time after the formation of the incipient gel. It was demonstrated that temperature, polymer, and cross-linker concentrations could be utilized to tune the physical properties of the Ugi gels such as structure, transparency, and viscoelasticity.     

Concentration selective hydration and phase states of hydroxyethyl cellulose (HEC) in aqueous solutions

Solution behaviour of hydroxyethyl cellulose (HEC) is reported in the polymer concentration range spanning over two decades (c=0.002-5% (w/v)). The results conclude the following: (i) dilute solution regime prevailed for c<0.2% (w/v), flexible HEC fibres of typical length ≈ 1 μm and persistence length ≈ 10 nm were found here, (ii) for 0.2相似文献   

Effect of sodium chloride on the gelatinization of starch: a multimeasurement study.

The effect of sodium chloride on the gelatinization and rheological properties of wheat and potato starches has been studied using differential scanning calorimetry, dynamic mechanical thermal analysis, and electron spin resonance techniques. All samples contained 60% water (w/w wet starch basis) and the salt content ranged from 0 to 16% (g/100 g starch-water). The presence of salt affected the onset (T(o)), peak (T(p)), and end (T(e)) temperatures of gelatinization, gelatinization enthalpy (DeltaH), storage modulus (G'), and rotational mobility coefficient (D(rot)), and the effect differed by salt concentration. 1H-NMR was used in parallel in order to elucidate how salts affect the properties of water in starch suspensions and in aqueous salt solutions according to their position on the Hofmeister series classification. The obtained results suggest that the mechanism of starch gelatinization in salt solutions can be attributed to the effect of solute on water properties and direct polymer-solute interactions. These two effects conflict with one another and result in complex effect patterns depending on the concentration of the salts.     

S-protected thiolated chitosan: Synthesis and in vitro characterization

Purpose of the present study was the generation and evaluation of novel thiolated chitosans, so-named S-protected thiolated chitosans as mucosal drug delivery systems. Stability of all conjugates concerning swelling and disintegration behavior as well as drug release was examined. Mucoadhesive properties were evaluated in vitro on intestinal mucosa. Different thiolated chitosans were generated displaying increasing amounts of attached free thiol groups on the polymer, whereby more than 50% of these thiol groups were linked with 6-mercaptonicotinamide. Based on the implementation of this hydrophobic residue, the swelling behavior was 2-fold decreased, whereas stability was essentially improved. Their mucoadhesive properties were 2- and 14-fold increased compared to corresponding thiolated and unmodified chitosans, respectively. Release studies out of matrix tablets comprising the novel conjugates revealed a controlled release of a model peptide. Accordingly, S-protected thiomers represent a promising type of mucoadhesive polymers for the development of various mucosal drug delivery systems.     

Proteolytic degradation of cold-water fish gelatin solutions and gels

The stability of cold-water fish gelatin (FG), both in solution and in the gel phase, has been studied as function of both temperature and exposure towards novel proteases of marine origin. A 1% (w/v) FG solution was readily degraded by such proteases above 20 degrees C, which was expected since FG at this temperature is a random coil molecule lacking the protective triple helical structure found in collagen. The dynamic storage modulus for a 10% (w/v) FG gel increased monotonically at 4 degrees C. Ramping the temperature to 6, 8 or 10 degrees C led to a drastic reduction in G', but an apparent partial recovery of the network (increasing G') was observed with time at all temperatures. In the presence of proteases, a lower storage modulus was observed. At constant 4 degrees C, an apparent maximum value was reached after curing for 2h followed by a decrease in G' indicating protease activity. Ramping of temperature in the presence of proteases led to an even more drastic reduction in G' and no recovery of structure was observed with time. In this case, the overall rheological behaviour is a complex function of both thermal influence as well as proteolytic activity. In an endeavour to quantify the effect of the presence of proteolytic enzymes on the gelatin network, rheological investigation were undertaken where the dynamic storage moduli were recorded on different 10% (w/v) FG samples that had been acid hydrolysed to yield different average molecular weights. A significant reduction in storage modulus for average molecular weights below 50 kDa was found. This critical molecular weight most probably reflects the on-set of a regime where shorter chain lengths prevent percolation due to an increase in the loose end and sol fraction as well as a reduction in the average length of the pyrrolidine-rich regions reducing the number of possible junction zones.     

Rheological investigation on dynamic and structure of separated phases in polymer mixture–ionic surfactant ternary system

Ternary systems composed of 0.30% sodium carboxymethyl cellulose (NaCMC), 0.70% hydroxypropylmethyl cellulose (HPMC), and sodium dodecylsulfate (SDS) of various concentrations (0.00–2.00%), were investigated by oscillatory and flow shear rheometry. The investigation on binary mixtures of HPMC/SDS (0.7% HPMC, 0.00–2.00% SDS) and HPMC/NaCMC (1.00% polymer mixtures with HPMC/NaCMC mass ratio ranging from 1/0 to 0/1) was also carried out. In the examined systems, various interactions between HPMC–NaCMC, HPMC–SDS and NaCMC–(HPMC–SDS) take place. The interactions may bring about phase separation in the ternary system into HPMC–SDS complex rich phase (coacervate), and NaCMC rich phase (supernatant). The possibility of employing the interactions in the ternary system to vary structural properties of the coacervate, in terms of viscoelasticity and shear rate influence, was investigated. Rheological properties of the ternary system, as well as of the separated coacervate and the supernatant were tested. Influence of shear rate on the interactions taking place in both the binary and the ternary mixtures was examined. It was found that the applied shear rate can influence the interactions. Molecular mechanisms determining the rheological properties of the coacervate were suggested. It was found that complex intermolecular interactions in the ternary system can be employed to attain control over the structural properties of the coacervate phase.     

DWS microrheology of a linear polysaccharide

Diffusing wave spectroscopy has been used to measure the rheological behavior of pullulan (M(w) = 1 x 10(5)) aqueous solutions up to concentration of 40 g/dL. It was found that these solutions were mainly viscous, with the loss modulus G' higher than the elastic modulus G'. The plot of the specific viscosity eta(sp) as a function of pullulan concentration showed two critical concentrations c = 4 g/dL and c = 15 g/dL. For c < c, eta( sp) approximately c(1.25+/-0.05); for c < c < c, eta( sp) approximately c(2+/-0.05); and for c > c, eta( sp) approximately c(4.5+/-0.5). These results are in very good agreement with those reported in the literature.     

Enhanced adhesion of dopamine methacrylamide elastomers via viscoelasticity tuning

We present a study on the effects of cross-linking on the adhesive properties of bio-inspired 3,4-dihydroxyphenylalanine (DOPA). DOPA has a unique catechol moiety found in adhesive proteins in marine organisms, such as mussels and polychaete, which results in strong adhesion in aquatic conditions. Incorporation of this functional group in synthetic polymers provides the basis for pressure-sensitive adhesives for use in a broad range of environments. A series of cross-linked DOPA-containing polymers were prepared by adding divinyl cross-linking agent ethylene glycol dimethacrylate (EGDMA) to monomer mixtures of dopamine methacrylamide (DMA) and 2-methoxyethyl acrylate (MEA). Samples were prepared using a solvent-free microwave-assisted polymerization reaction and compared to a similar series of cross-linked MEA materials. Cross-linking with EGDMA tunes the viscoelastic properties of the adhesive material and has the advantage of not reacting with the catechol group that is responsible for the excellent adhesive performance of this material. Adhesion strength was measured by uniaxial indentation tests, which indicated that 0.001 mol % of EGDMA-cross-linked copolymer showed the highest work of adhesion in dry conditions, but non-cross-linked DMA was the highest in wet conditions. The results suggest that there is an optimal cross-linking degree that displays the highest adhesion by balancing viscous and elastic behaviors of the polymer but this appears to depend on the conditions. This concentration of cross-linker is well below the theoretical percolation threshold, and we propose that subtle changes in polymer viscoelastic properties can result in significant improvements in adhesion of DOPA-based materials. The properties of lightly cross-linked poly(DMA-co-MEA) were investigated by measurement of the frequency dependence of the storage modulus (G') and loss modulus (G'). The frequency-dependence of G' and magnitude of G' showed gradual decreases with the fraction of EGDMA. Loosely cross-linked DMA copolymers, containing 0% and 0.001 mol % of EGDMA-cross-linked copolymers, displayed rheological behavior appropriate for pressure-sensitive adhesives characterized by a higher G' at high frequencies and lower G' at low frequencies. Our results indicate that dimethacrylate cross-linking of DMA copolymers can be used to enhance the adhesive properties of this unique material.     

Rheological characterization of the galactomannan from Leucaena leucocephala seed

A water soluble galactomannan isolated from Leucaena leucocephala seeds gave an intrinsic viscosity of 3.5dl/g and viscosity average molecular mass, M(v), of 6.98×10(5)g/mol. This was in reasonably good agreement with the value of the weight average molecular mass, M(w), of 5.44±0.20×10(5)g/mol determined by GPC-MALLS coupled to RI. The onset of polymer coil overlap occurred at c*[η] of 2.1, with slope of 3.0 above and 1.3 below the point of polymer coil overlap. The shear viscosity of the polysaccharide was temperature dependent and decreased with increasing temperature. The activation energy for viscous flow of 3.0% polysaccharide concentration obtained by Arrhenius plot of zero shear viscosity as a function of temperature was 26.4kJ/mol. Both the storage modulus (G') and loss modulus (G″) showed strong dependence on frequency indicating the presence of entangled coils. The Cox-Merz plot gave close superimposition of the complex and shear viscosities.     

Mechanical properties of cultured human airway smooth muscle cells from 0.05 to 0.4 Hz.

We investigated the rheological properties of living human airway smooth muscle cells in culture and monitored the changes in rheological properties induced by exogenous stimuli. We oscillated small magnetic microbeads bound specifically to integrin receptors and computed the storage modulus (G') and loss modulus (G") from the applied torque and the resulting rotational motion of the beads as determined from their remanent magnetic field. Under baseline conditions, G' increased weakly with frequency, whereas G" was independent of the frequency. The cell was predominantly elastic, with the ratio of G" to G' (defined as eta) being approximately 0. 35 at all frequencies. G' and G" increased together after contractile activation and decreased together after deactivation, whereas eta remained unaltered in each case. Thus elastic and dissipative stresses were coupled during changes in contractile activation. G' and G" decreased with disruption of the actin fibers by cytochalasin D, but eta increased. These results imply that the mechanisms for frictional energy loss and elastic energy storage in the living cell are coupled and reside within the cytoskeleton.     

In situ gelling of alginate/pluronic solutions for ophthalmic delivery of pilocarpine

We prepared a series of alginate and Pluronic-based solutions as the in situ gelling vehicles for ophthalmic delivery of pilocarpine. The rheological properties, in vitro release as well as in vivo pharmacological response of polymer solutions, including alginate, Pluronic solution, and alginate/Pluronic solution, were evaluated. The optimum concentration of alginate solution for the in situ gel-forming delivery systems was 2% (w/w) and that for Pluronic solution was 14% (w/w). The mixture of 0.1% alginate and 14% Pluronic solutions showed a significant increase in gel strength in the physiological condition; this gel mixture was also found to be free flowing at pH 4.0 and 25 degrees C. Both in vitro release and in vivo pharmacological studies indicated that the alginate/Pluronic solution retained pilocarpine better than the alginate or Pluronic solutions alone. The results demonstrated that the alginate/Pluronic mixture can be used as an in situ gelling vehicle to increase ocular bioavailability.     

Statistical Approach for Assessing the Influence of Calcium Silicate and HPMC on the Formulation of Novel Alfuzosin Hydrochloride Mucoadhesive-Floating Beads as Gastroretentive Drug Delivery Systems

Multiparticulate floating drug delivery systems have proven potential as controlled-release gastroretentive drug delivery systems that avoid the "all or none" gastric emptying nature of single-unit floating dosage forms. An objective of the presence investigation was to develop calcium silicate (CaSi)/calcium alginate (Ca-Alg)/hydroxypropyl methylcellulose (HPMC) mucoadhesive-floating beads that provide time- and site-specific drug release of alfuzosin hydrochloride (Alf). Beads were prepared by simultaneous internal and external gelation method utilizing 3(2) factorial design as an experimental design; with two main factors evaluated for their influence on the prepared beads; the concentration of CaSi as floating aid (X (1)) and the percentage of HPMC as viscosity enhancer and mucoadhesive polymer (X (2)), each of them was tested in three levels. Developed formulations were evaluated for yield, entrapment efficiency, particle size, surface topography, and buoyancy. Differential scanning calorimetry, Fourier transform infrared spectroscopy, in vitro drug release, as well as in vitro mucoadhesion using rat stomach mucosal membrane were also conducted. Percentage yield and entrapment efficiency ranged from 57.03% to 78.51% and from 49.78% to 83.26%, respectively. Statistical analysis using ANOVA proved that increasing the concentration of either CaSi or HPMC significantly increased the beads yield. Both CaSi and HPMC concentrations were found to significantly affect Alf release from the beads. Additionally, higher CaSi concentration significantly increased the beads diameter while HPMC concentration showed significant positive effect on the beads mucoadhesive properties. CaSi/Ca-Alg/HPMC beads represent simple floating-mucoadhesive gastroretentive system that could be useful in chronopharmacotherapy of benign prostatic hyperplasia.     

Local measurements of viscoelastic moduli of entangled actin networks using an oscillating magnetic bead micro-rheometer.

A magnetically driven bead micro-rheometer for local quantitative measurements of the viscoelastic moduli in soft macromolecular networks such as an entangled F-actin solution is described. The viscoelastic response of paramagnetic latex beads to external magnetic forces is analyzed by optical particle tracking and fast image processing. Several modes of operation are possible, including analysis of bead motion after pulse-like or oscillatory excitations, or after application of a constant force. The frequency dependencies of the storage modulus, G'(omega), and the loss modulus, G'(omega), were measured for frequencies from 10(-1) Hz to 5 Hz. For low actin concentrations (mesh sizes epsilon > 0.1 micron) we found that both G'(omega) and G'(omega) scale with omega 1/2. This scaling law and the absolute values of G' and G' agree with conventional rheological measurements, demonstrating that the magnetic bead micro-rheometer allows quantitative measurements of the viscoelastic moduli. Local variations of the viscoelastic moduli (and thus of the network density and mesh size) can be probed in several ways: 1) by measurement of G' and G' at different sites within the network; 2) by the simultaneous analysis of several embedded beads; and 3) by evaluation of the bead trajectories over macroscopic distances. The latter mode yields absolute values and local fluctuations of the apparent viscosity eta(x) of the network.     

Microstructure and kinetic rheological behavior of amidated and nonamidated LM pectin gels

The microstructure, kinetics of gelation, and rheological properties have been investigated for gels of nonamidated pectin (C30), amidated pectin (G), and saponified pectin (sG) at different pH values, both with and without sucrose. The low-methoxyl (LM) pectin gels were characterized in the presence of Ca(2+) by oscillatory measurements and transmission electron microscopy (TEM). The appearance of the gel microstructure varied with the pH, the gel structure being sparse and aggregated at pH 3 but dense and somewhat entangled at pH 7. During gel formation of pectins G and C30 at pH 3 there was a rapid increase in G' initially followed by a small increase with time. At pH 7 G' increased very rapidly at first but then remained constant. The presence of sucrose influenced neither the kinetic behavior nor the microstructure of the gels but strongly increased the storage modulus. Pectins G and C30 showed large variations in G' at pH values 3, 4, 5, and 7 in the presence of sucrose, and the maximum in G' in the samples occurred at different pH values. Due to its high Ca(2+) sensitivity, pectin sG had a storage modulus that was about 50 times higher than that of its mother pectin G at pH 7.     

Carboxymethyl tamarind kernel polysaccharide nanoparticles for ophthalmic drug delivery

Tropicamide-loaded carboxymethyl tamarind kernel polysaccharide (CMTKP) nanoparticles were prepared and evaluated for ocular delivery. Preparation of ionotropically gelled CMTKP nanoparticles was optimized employing three-levels, two-factor central composite design. Concentration of polymer and crosslinker had significant synergistic effect on particle size and % encapsulation efficiency. The optimal calculated parameters were concentrations of CMTKP 0.10% (w/v) and calcium chloride 0.11% (w/v). The optimized tropicamide-loaded CMTKP formulation showed ex vivo corneal permeation of tropicamide across isolated goat cornea comparable to its aqueous solution. Further, the mucoadhesive and non-irritant nature of CMTKP nanoparticles indicate their suitability as ocular delivery system.     

Rheology and dynamic light scattering of silk fibroin solution extracted from the middle division of Bombyx mori silkworm

Dynamic light scattering (DLS) and rheological measurements were performed on aqueous silk fibroin solutions extracted from the middle division of Bombyx mori silkworm over a wide range of polymer concentration C from 0.08 to 27.5 wt %. DLS results obtained in the dilute region of C less than 1 wt % are consistent with a model that an elementary unit is a large protein complex consisting of silk fibroin and P25 with a 6:1 molar ratio. Rheological measurements in the dilute C region reveal that those units (or clusters) with the hydrodynamic radius of about 100 nm form a network extending over the whole sample volume with small pseudoplateau modulus mainly by ionic bonding between COO(-) ions of the fibroin molecules and divalent metallic ions such as Ca(2+) or Mg(2+) ions present in the sample and also that, after a yield stress is reached, steady plastic flow is induced with viscosity much lower than the zero-shear viscosity estimated from creep and creep recovery measurements by 4-6 orders of magnitude. Angular frequency omega dependencies of the storage and the loss shear moduli, G'(omega) and G' '(omega), measured in the linear viscoelastic region, indicate that all solutions possess the pseudoplateau modulus in the low omega region and samples become highly viscoleastic for C greater, similar 4.2 wt %. Above C = 11.2 wt % another plateau appears at the high omega end accompanied by a distinct maximum of G' ' in the intermediate omega region. The relaxation motion with tau = 0.5 s corresponding to the maximum of G' ' is one of characteristic properties of the fibroin solutions in the high C region. Thermorheological behaviors of the solution with C = 27.5 wt % show that the network structure formed in the MM part of the silk gland is susceptible to temperature and a more stable homogeneous network is realized by raising the temperature up to T = 65 degrees C.