Trichoderma harzianum and its Metabolite 6-Pentyl-alpha-pyrone Suppress Fusaric Acid Produced by Fusarium moniliforme

The interaction of the pathogen Fusarium moniliforme and two antagonistic Trichoderma harzianum isolates was studied especially with respect to their secondary metabolites fusaric acid (FA) and 6‐pentyl‐alpha‐pyrone (6PAP). Among 10 isolates of F. moniliforme screened for FA production on maize kernels, the isolate 8 accumulated the highest amount of FA (678 μg/g). Mycelial growth and production of FA by isolate 8, determined in different liquid media revealed that the highest biomass and FA were produced in Czapek Dox Broth (CDB) followed by Richard’s solution. The amount of FA per gram mycelial dry weight reached its maximum in CDB and Richard’s solution after 14 days of incubation. Mycelial growth and conidia production of both Trichoderma isolates (T16 and T23) were retarded by increasing concentrations of FA in agar medium. At FA concentration of 300 mg/ml the radial mycelial growth of the isolates T16 and T23 were retarded by 32.5% and 45%, respectively. Conidia production was diminished in a similar extent as mycelial growth. Both T. harzianum isolates were capable to degrade FA in potato dextrose broth medium, particularly when lower doses of FA were present. In the presence of 50 mg/ml FA in the culture medium, the isolates T23 and T16 reduced FA by 51.4% and 88.4%, respectively, 9 days post‐inoculation. The antifungal metabolite 6PAP, isolated from T. harzianum T23 cultures, was introduced at different concentrations into 2‐day‐old cultures of F. moniliforme. After further 5 days of incubation of F. moniliforme in the presence of 6PAP, the FA contents per gram mycelial dry weight were significantly decreased compared to control cultures where 6PAP was absent. Dosages of 300 and 400 mg/l of 6PAP in the cultures retarded FA accumulations by 62.5% and 77.2%, respectively. The current results, however, provided the first evidence for activity of 6PAP, as a Trichoderma secondary metabolite, on degrading/synthesis suppression of the Fusarium toxin FA.     

Protein Content and Amino Acid Composition of Certain Fungi Evaluated for Microbial Protein Production

The protein and total amino acid contents of four mycelial fungal strains and one yeast were approximately the same for cultures harvested in the mid-log and early stationary growth phases. It was found that Fusarium oxysporum and Fusarium moniliforme contained approximately 30% more protein and total amino acids than Aspergillus niger. The amino acid composition of mycelial protein compares favorably with that of British Petroleum yeast protein Toprina produced commercially on hydrocarbon substrates. Fusarium spp. may be suitable for commercial production of microbial protein, especially when low-cost agricultural or industrial waste products are readily available as energy sources. Genetic manipulation of these fungi, such as induction of mutant strains through irradiation, may be desirable to obtain a mycelial product of improved yield and/or quality.     

Fumigant activity of volatiles from Streptomyces alboflavus TD-1 against Fusarium moniliforme Sheldon

The fumigant activity of volatiles generated by Streptomyces alboflavus TD-1 against Fusarium moniliforme Sheldon was investigated. The results showed that the mycelial growth, sporulation, and spore germination of F. moniliforme were significantly suppressed, and that membrane permeability was disrupted in the presence of the volatiles. Gas chromatography-mass Spectrometry analysis revealed 31 kinds of volatile organic compound from the volatiles. Among them, two earthy-smelling substances, namely, 2-methylisoborneol (50.97%) and trans-1,10-dimethyl-trans-9-decalinol (3.10%) were found. The most abundant compound, 2-methylisoborneol, exhibited inhibitory activity against F. moniliforme by fumigation. All these results suggested that S. alboflavus TD-1 can be a promising starter for the inhibition of F. moniliforme through fumigant action.     

The influence of geometry on hydrodynamic and mass transfer characteristics in an external airlift reactor for the cultivation of filamentous fungi

The influences of geometric configuration, mycelial broth rheology and superficial gas velocity (U_sg) were investigated with respect to the following hydrodynamic parameters: gas holdup (), oxygen transfer coefficient (K_La) and mixing time (t_m). Increases in U_sg and height of gas separator (H_t) caused an increase in and K_La, and a decrease in t_m. Consequently, a diameter ratio (D_d/D_r) of 0.71 and H_t 0.20 m were found to be the best geometry and operation parameters to achieve high aeration and mixing efficiency for the high viscous broth system in the cultivation of filamentous fungi. An external airlift reactor (EALR) was developed and designed for the cultivation of filamentous fungi. The EALR with two spargers excels in reliability and high aeration and mass transfer coefficiency, resulting in a fast mycelial growth and high biomass productivity in the cultivation of the fungus Rhizopus oryzae.     

Nuclear changes in allium cepa in response to infection by fusarium moniliforme

Fusarium moniliforme was isolated [into culture] from white onion and inoculated into holes bored in onion bulbs. After 48 hrs, the nuclear dry mass of onion cells 0–5 mm ahead of the mycelium had decreased by 19% as determined by quantitative interference microscopy as compared to nuclear dry mass decreases of 11 % caused by avirulent Aspergillus niger, 26 % by an unidentified onion pathogen, 41 % by virulent Botrytis allii, and 42 % by virulent Aspergillus niger. In the present study, the nucleolar dry mass declined by 34 % in response to F. moniliforme under the same conditions. Degradation or exit of nuclear and nucleolar macromolecules in response to fungal products secreted in advance of mycelium may be responsible for lower nuclear and nucleolar dry mass.     

Protection of maize seedlings byFusarium moniliforme against infection byFusarium graminearum in the soil

The incidence ofFusarium moniliforme in surface-sterilized kernels in two commercial South African white maize cultivars was 64% and 6%, respectively. Heat treatment completely eliminated seedborneF. moniliforme from kernels of both cultivars. Heat treated, uncontaminated maize germlings were pre-inoculated with different isolates ofF. moniliforme and planted in steam-treated soil containing inoculum of different isolates ofF. graminearum Group 1 and Group 2. Seedling weights of germlings pre-inoculated with some isolates ofF. moniliforme were significantly higher than those of controls when exposed to some isolates ofF. graminearum in the soil. The protective effect of pre-inoculation withF. moniliforme was particularly evident in maize seedlings exposed to inoculum of an aggressive isolate ofF. graminearum Group 1. This is the first report of the protection of maize seedlings byF. moniliforme against infection byF. graminearum in the soil.     

Potential bio-control agent for management of post-flowering stalk rot complex and maize plant health

The of aim of this study was to evaluate the potentiality of the native isolate of Trichoderma harzianum from IARI farm for the management of post-flowering stalk rot of maize and improvement of plant health. The treatment was tried as a seed treatment with the potent commercial formulation Kalisena SD (Aspergillus niger), neem kernel powder and effective fungicides (Thiram, Carbendazim, Captan) for comparison of its efficacy. The minimum disease was recorded in plots treated with native isolate both due to Fusarium moniliforme and Macrophomina phaseolina. The fungicides Carbendazim and Thiram ranked second in controlling the disease due to F. moniliforme and M. phaseolina, respectively. Plant health with respect to vigour and plant stand were found to be better than those of all the other treatments. It is concluded that the native isolate of T. harzianum may be used for maintaining good plant health and managing post-flowering stalk rot of maize.     

Submerged citric acid fermentation: rheological properties ofAspergillus niger broth in a stirred tank reactor

Summary A large number of submerged citric acid fermentations in a beet molasses substrate was studied. The development of Aspergillus niger from conidia to pellets was followed. Rheological characteristics of the fermentation broth including the pellets were determined. The results obtained confirm the fact that the non-Newtonian pseudoplastic behaviour of the fermentation broth was due to the presence of mycelial pellets. The most significant changes in rheological properties occurred during the period of maximal citric acid production and increase in biomass. Offprint requests to: M. Berovi     

一株链霉菌21-1的分离鉴定及其对禾谷镰刀菌的抑菌活性

【背景】由禾谷镰刀菌(Fusarium graminearum)引起的小麦赤霉病严重威胁我国的小麦生产。【目的】筛选对禾谷镰刀菌具有拮抗能力的链霉菌菌株,为生防菌剂开发提供理论基础。【方法】利用平板对峙法筛选对禾谷镰刀菌具有拮抗能力的链霉菌;通过形态特征、生理生化特征和16S rRNA基因序列分析对其进行鉴定;通过病原菌菌丝生长、孢子产生及萌发抑制试验分析其发酵液的抑菌活性;利用人工接种试验测定该菌株发酵液的防病效果。【结果】筛选到一株对禾谷镰刀菌具有较强拮抗活性的链霉菌21-1,抑菌率为59.5%。依据形态特征、生理生化特性和16S rRNA基因序列分析,将该菌株鉴定为黄三素链霉菌(Streptomycesflavotricini)。菌株21-1发酵液能够抑制禾谷镰刀菌的菌丝生长、孢子产生及萌发过程,而且可以降低禾谷镰刀菌菌丝中可溶性蛋白质的含量,并增加丙二醛的含量。菌株21-1可以产生蛋白酶及纤维素酶。菌株21-1菌液10倍稀释液对小麦赤霉病的防效最佳,为70.1%。此外,菌株21-1发酵液对其他8种植物病原菌均有较好的抑制作用。【结论】菌株21-1对禾谷镰刀菌有较好的抑菌活性,具...     

Effect of Mycelial Forms on Citric Acid Fermentation in Submerged Mold Culture

A number of reports have been published on the production of citric acid by submerged mold culture. Most of them, however, have laid stresses on the effects of chemical factors, such as metal ions, nitrogen sources, potassium ferrocyanide and methanol, and very little has been reported on the effect of other factors.

The form of mycelia of mold changes depending on the physical characters cf broth, and it was found that Aspergillus niger 93A, which showed a constant activity of citric acid production, could increase its acid production activity when mycelial forms were controlled to filamentous by adding suitable non-ionic surface active agents to the broth.     

Siderophore-Producing <Emphasis Type="Italic">Alcaligenes feacalis</Emphasis> Exhibited More Biocontrol Potential Vis-à-Vis Chemical Fungicide

We report the in vitro phytopathogen suppression activity of siderophoregenic preparations of Alcaligenes feacalis vis-à-vis the oraganochlorine fungicide, bavistin. Siderophore-rich culture broth, siderophore-rich supernatant, and purified siderophore preparation exerted antifungal activity against Aspergillus niger NCIM 1025, A. flavus NCIM 650, Fusarium oxysporum NCIM 1008, and Alternaria alternata IARI 715. Among all the preparations, siderophore-rich broth exhibited potent antifungal activity. The minimum fungicidal concentration required was 75 μl for A. niger and F. oxysporum and 50 μl for A. flavus and A. alternata.     

Hydrodynamic, physiological, and morphological characteristics of Fusarium moniliforme in geometrically dissimilar stirred bioreactors

The influence of two mixing geometries (at the same scale) with different flow energy distributions on the performance of the gibberellic acid fermentation and on the morphology of the producing fungus Fusarium moniliforme was investigated. Fermentations were performed using a turbine mixing system (TMS) and a counterflow mixing system (CMS), which were high and low power number mixing systems, respectively. Different agitator speed rate profiles were maintained to obtain equal specific power inputs to both mixing systems. Substantial differences in morphology and productivity of F. moniliforme were found. To investigate the causes of these differences, local values and spectra of the kinetic energy of flow fluctuations were measured during the fermentations using a stirring intensity measuring device (SIMD) and a frequency spectrum analyzer. Biomass and gibberellic acid concentrations were found to be higher in the TMS, where the energy distribution was less even, and Vi/here the main part of the energy was at small frequencies (large eddies). An automated image analysis method was used for quantitative characterization of F. moniliforme freely dispersed mycelia and clump morphology. A higher proportion of clumped mycelia with clumps of larger area, perimeter, and roughness was observed in the TMS. A correlation between the morphology and productivity was found, and TMS favored the development of more productive mycelia with longer and thinner hyphae. Introduced power was not a good parameter to characterize different impellers, even at a given scale. (c) 1995 John Wiley & Sons, Inc.     

Frequency and diversity of Fusarium spp. colonizing roots of Egyptian cottons

Abstract

Fusarium species are known to play a role in several diseases of cotton including the seedling disease complex, wilt, and boll rot. Therefore, a mycoflora study was conducted in 1998 in order to identify Fusarium species found in association with cotton roots. A total of 109 samples of cotton seedlings infected with post-emergence damping-off or rotted roots of adult plants were obtained from different cotton-growing areas in Egypt. Forty-six isolates were recovered and were identified as follows: F. oxysporum (28 isolates), F. moniliforme (9), F. solani (6), F. avenaceum (2), F. chlamydosporum (1). F. oxysporum, F. moniliforme and F. solani, the dominant species, accounted for 60.9%, 19.6% and 13% of the total isolates, respectively in 1998. F. oxysporum showed the highest isolation frequency in Beharia and Minufiya while F. moniliforme showed the most isolation frequency in Minufiya and Gharbiya. F. oxysporum was one of the major taxa of the Fusarium assemblage from Giza 70. F. oxysporum showed the most frequently isolated fungus in May while F. moniliforme and F. solani were the most frequently isolated fungi in August. Isolation frequency of Fusarium spp. during July and August was significantly greater than that of April or June. This implies that cotton roots are subjected more to colonization by Fusarium spp. as plants mature. Regarding pathogenicity, of the 46 isolates of Fusarium spp. tested under greenhouse conditions, 38 isolates (82.4%) were pathogenic to seedlings of Giza 89. This study indicates that F. oxysporum and F. moniliforme are important pathogens in the etiology of cotton damping-off in Egypt.     

Evaluation of the potential of Aspergillus niger species for the bioconversion of L-phenylalanine into 2-phenylethanol

Aspergillus niger was explored, for the first time, for the production of 2-phenylethanol (a rose-like aroma) using L-phenylalanine as precursor. Among the strains screened, A. niger CMICC 298302 was shown to produce, in a culture medium containing 6 g L-phenylalanine l^–1 and 60 g glucose l^–1, 1375 mg 2-phenylethanol l^–1 with a productivity of 153 mg l^–1 day^–1 and a molar yield of 74%. 2-Phenylethanol concentrations of 1 to 2 g l^–1 led to a two-fold and ten-fold decrease, respectively, in the mycelial radial growth rate. However, 2-phenylethanol was synthesized as the sole aromatic product and accumulated in the culture broth.     

Microbial biomass production by continuous fermentation of bark hydrolysate

Summary The fungus Aspergillus niger, an unidentified filamentous fungus (strain no. PDDCC8239) and the yeast Candida tropicalis were grown in continuous culture in stirred tank reactors at dilution retes varying between 0.02–0.1 h^-1 on a bark extract medium made by dilute acid hydrolysis of Pinus radiata bark. Maximum yields were 5.1, 18.7, and 61.5 mg biomass·g^-1 bark for the unidentified fungus, A. niger and C. tropicalis respectively. Culturing in a tower fermenter under otherwise identical environmental conditions increased the yield of A. niger to 27.3 mg biomass·g^-1 bark. The yield of C. tropicalis represents a productivity of 0.26g biomass·l^-1·h^-1 which exceeds other reported values of bark fermentations. Analysis of the medium and spent broth revealed significant breakdown of tannin material by C. tropicalis during growth. This ability may be of value in the treatment of tannin-based industrial effluents.     

Improved performance in viscous mycelial fermentations by agitator retrofitting

For viscous mycelial fermentations it was demonstrated at the pilot-plant scale that the replacement of standard radial flow Rushton turbines with larger diameter axial-flow Prochem hydrofoil impellers significantly improved oxygen transfer efficiency. It was also determined that the Streptomyces broth under evaluation is highly shear thinning. Separate experiments using a Norcardia broth with similar Theological properties demonstrated that the oxygen transfer coefficient, K(L)a, can be greatly increased by use of water additions to reduce broth viscosity. These observations are consistent with the hypothesis that the improvement in oxygen transfer by changing agitator types is primarily due to an improvement in bulk mixing. A model is presented, based on the concepts of Bajpai and Reuss, which explains this improvement in performance in terms of enlargement of the well mixed micromixer region for viscous mycelial broths.     

Preharvest aflatoxin contamination of maize inoculated withAspergillus flavus andFusarium moniliforme

A two-year factorial experiment was utilized to test plants field-inoculated singly and in combination withAspergillus flavus andFusarium moniliforme. Pinbar inoculations were made through the husks with conidial suspensions, and 10-ear maize samples were harvested at 60 days post-silking for aflatoxin determinations. When ears were inoculated with both fungi simultaneously,F. moniliforme reduced aflatoxin formation byA. flavus isolate NRRL 3357 by approximately two-thirds.F. moniliforme had no significant effect on naturally occurring aflatoxin contamination byA. flavus. This may be due to the timing of infection by both fungi in the field. In nature,A. flavus andF. moniliforme respond differently to the environment, offering one explanation of whyF. moniliforme did not measurably affect the other fungus.     

CFD simulation of mixing for high-solids anaerobic digestion

A computational fluid dynamics (CFD) model that simulates mechanical mixing for high-solids anaerobic digestion was developed. Numerical simulations of mixing manure slurry which exhibits non-Newtonian pseudo-plastic fluid behavior were performed for six designs: (i) one helical ribbon impeller; (ii) one anchor impeller; (iii) one curtain-type impeller; (iv) three counterflow (CF-2) impellers; (v) two modified high solidity (MHS 3/39°) impellers; and (vi) two pitched blade turbine impellers. The CFD model was validated against measurements for mixing a Herschel-Bulkley fluid by ribbon and anchor impellers. Based on mixing time with respect to mixing energy level, three impeller types (ribbon, CF-2, and MHS 3/39°) stand out when agitating highly viscous fluids, of these mixing with two MHS 3/39° impellers requires the lowest power input to homogenize the manure slurry. A comparison of digestion material demonstrates that the mixing energy varies with manure type and total solids concentration to obtain a given mixing time. Moreover, an in-depth discussion about the CFD strategy, the influences of flow regime and impeller type on mixing characteristics, and the intrinsic relation between mixing and flow field is included.     

Optimization of culture conditions and characterization of a new lectin from <Emphasis Type="Italic">Aspergillus niger</Emphasis>

Lectin activity was determined on solidified medium containing agar and in broth cultures of Aspergillus niger. The fungus was found to express 16 times higher activity in broth cultures, when grown in a medium adjusted to pH 5.5 at 30°C under stationary condition. Lectin activity was found to be expressed by 6-day-old mycelial cultures with maximum activity being expressed on 9th day of incubation. The crude lectin (total titer 1280) was found to be precipitated at 50% saturation of ammonium sulphate with 2.4-fold purifi cation and 83% yield in the precipitate. The partially purifi ed lectin was found to agglutinate all human, rat, mice and pig erythrocytes. It was found to have a strong binding affinity to mucin, asialofetuin and inulin.     

Dependence of mycelial morphology on impeller type and agitation intensity

The influence of the agitation conditions on the morphology of Penicillium chrysogenum (freely dispersed and aggregated forms) was examined using radial (Rushton turbines and paddles), axial (pitched blades, propeller, and Prochem Maxflow T), and counterflow impellers (Intermig). Culture broth was taken from a continuous fermentation at steady state and was agitated for 30 min in an ungassed vessel of 1.4-L working volume. The power inputs per unit volume of liquid in the tank, P/V(L), ranged from 0.6 to 6 kW/m(3). Image analysis was used to measure mycelial morphology. To characterize the intensity of the damage caused by different impellers, the mean total hyphal length (freely dispersed form) and the mean projected area (all dispersed types, i.e., also including aggregates) were used. [In this study, breakage of aggregates was taken into account quantitatively for the first time.]At 1.4-L scale and a given P/V(L), changes in the morphology depended significantly on the impeller geometry. However, the morphological data (obtained with different geometries and various P/V(L)) could be correlated on the basis of equal tip speed and two other, less simple, mixing parameters. One is based on the specific energy dissipation rate in the impeller region, which is simply related to P/V(L) and particular impeller geometrical parameters. The other which is developed in this study is based on a combination of the specific energy dissipation rate in the impeller swept volume and the frequency of mycelial circulation through that volume. For convenience, the function arising from this concept is called the "energy dissipation/circulation" function.To test the broader validity of these correlations, scale-up experiments were carried out in mixing tanks of 1.4, 20, and 180 L using a Rushton turbine and broth from a fed-batch fermentation. The energy dissipation/circulation function was a reasonable correlating parameter for hyphal damage over this range of scales, whereas tip speed, P/V(L), and specific energy dissipation rate in the impeller region were poor. Two forms of the energy dissipation/circulation function were considered, one of which additionally allowed for the numbers of vortices behind the blades of each impeller type. Although both forms were successful at correlating the data for the standard impeller designs considered here, there was preliminary evidence that allowing for the vortices would be valuable. (c) 1996 John Wiley & Sons, Inc.