Buccal dental microwear variability in extant African Hominoidea: taxonomy versus ecology

Buccal microwear patterns on teeth are good indicators of the abrasiveness of foodstuffs and have been used to trace the dietary habits of fossil species, including primates and hominids. However, few studies have addressed the variability of this microwear. The abrasiveness of dietary components depends not only on the hardness of the particles ingested, but also on the presence of dust and other exogenous elements introduced during food processing. These elements are responsible for the microwear typology observed on the enamel surfaces of primate teeth. Here we analyzed the variability of buccal microwear patterns in African Great Apes (Gorilla gorilla and Pan troglodytes), using tooth molds obtained from the original specimens held in several osteological collections. Our results suggest that ecological adaptations at subspecies or population level account for differences in microwear patterns, which are attributed to habitat and ecological conditions within populations rather than differences between species. The findings from studies on the variability of buccal dental microwear in extant species will contribute to a better understanding of extinct hominids’ diet and ecology.     

Forest Floor Leaf Cover as a Barrier for Dust Accumulation in Tai National Park: Implications for Primate Dental Wear Studies

Mastication causes distinct use wear scars on teeth that can aid in dietary reconstructions of fossils. However, the role played by exogenous grit in dental wear complicates the association between wear and diet. Dental wear analyses often assume that foods closer to the soil contain more exogenous grit than those in the forest canopy. Yet, a layer of leaf litter covering many forest floors may trap grit from the soil, keeping it from settling on surrounding vegetation or becoming part of atmospheric dust. Cercocebus atys is frequently referenced in dental wear studies because of its dependence on hard Sacoglottis gabonensis seeds collected from the forest floor. Here we examine quantities of dust deposition at different forest levels and assess its potential role in wear patterns observed in C. atys. We collected grit from S. gabonensis seeds (N?=?64) found under the leaf litter and compared them to grit samples taken from the surface of leaves at different forest strata (N?=?450) in Ivory Coast’s Taï National Park. Seeds underneath the leaf litter were coated with significantly more grit than leaves above the leaf material and we conclude that leaf litter is a significant barrier to grit particles originating from the soil. Given that evidence points to a significant difference in grit amount between foodstuffs on the ground and foods near the ground, the findings lead to a prediction of differences in dental wear patterns between purely arboreal foragers and those incorporating terrestrial food sources.     

In vivo and in vitro turnover in dental microwear

Given the potential usefulness of dental microwear analyses in interpretations of archaeological and paleontological material, it is surprising how little we know about changes in individual microwear features through time. The purpose of this study was to document the turnover in primate dental microwear through in vivo dental studies of monkeys raised on different diets, and through in vitro studies of the abrasive effects of monkey chow biscuits on isolated monkey teeth. As in previous studies, epoxy replicas were prepared from dental impressions and examined under a scanning electron microscope. Results indicate that, under certain conditions, the turnover in primate dental microwear can be on the order of days, hours, or even minutes. Individual microscopic wear features can be obliterated within 24 hours on the molars of laboratory monkeys, and monkey chow biscuits can easily scratch the enamel of isolated monkey teeth. Monkeys raised on a hard diet showed more rapid turnover in dental microwear than monkeys raised on a soft diet. However, paired-sample tests revealed that, for all animals, the molar shearing facets were being abraded at a significantly slower rate than molar crushing/grinding facets. In light of these results, investigators should make every effort to use large samples in interspecific comparisons of dental microwear involving species with variable diets. Another implication of these results is that changes in dental microwear might be useful indicators of changes in oral behavior over relatively short periods of time.     

Preliminary examination of non-occlusal dental microwear in anthropoids: Implications for the study of fossil primates

Most studies of microscopic wear on non-human primate teeth have focused on the occlusal surfaces of molars. Recent analyses of the buccal surfaces of human cheek teeth have demonstrated an association between diet and dental microwear on the these surfaces as well. In the current study, we examine microwear on both the buccal and lingual surfaces of non-human primate molars to assess the potential of these surfaces to reveal information concerning anthropoid feeding behaviors. We compare frequency of microwear occurrence in 12 extant and 11 fossil anthropoid species. Among the living primates, the occurrence of microwear on non-occlusal surfaces appears to relate to both diet and degree of terrestriality. The implications of this research for the inference of feeding behaviors and substrate use in fossil cercopithecoids are discussed. © 1996 Wiley-Liss, Inc.     

Dental microwear and diet in Venezuelan primates.

Recent microwear analyses have demonstrated that wear patterns can be correlated with dietary differences. However, much of this work has been based on analyses of museum material where dates and locations of collection are not well known. In view of these difficulties, it would be desirable to compare microwear patterns for different genera collected from the same area at the same time. The opportunity to do this was provided by the collections of the Smithsonian Venezuelan Project (Handley, 1976), in which multiple primate genera were collected from the same humid tropical forest sites within the same month. The monkeys represent a wide range of dietary preferences, and include Saimiri, Cebus, Chiropotes, Ateles, Aotus, Pithecia, and Alouatta. As in previous microwear analyses, epoxy replicas were prepared from dental impressions, as described by Rose (1983) and Teaford and Oyen (1989). Two micrographs were taken of facet 9 on an upper second molar of each specimen. Computations and analyses were the same as described by Teaford and Robinson (1989). Results reaffirm previously documented differences in dental microwear between primates that feed on hard objects versus those that do not--with Pithecia and Alouatta at the extremes of a range of microwear patterns including more subtle differences between species with intermediate diets. The subtle microwear differences are by no means easy to document in museum samples. However, additional results suggest that 1) the width of microscopic scratches may be a poor indicator of dietary differences, 2) large and small pits may be formed differently, and 3) there are very few seasonal differences in dental microwear in the primates at these humid tropical forest sites.     

Diet-Related Buccal Dental Microwear Patterns in Central African Pygmy Foragers and Bantu-Speaking Farmer and Pastoralist Populations

Pygmy hunter-gatherers from Central Africa have shared a network of socioeconomic interactions with non-Pygmy Bantu speakers since agropastoral lifestyle spread across sub-Saharan Africa. Ethnographic studies have reported that their diets differ in consumption of both animal proteins and starch grains. Hunted meat and gathered plant foods, especially underground storage organs (USOs), are dietary staples for pygmies. However, scarce information exists about forager–farmer interaction and the agricultural products used by pygmies. Since the effects of dietary preferences on teeth in modern and past pygmies remain unknown, we explored dietary history through quantitative analysis of buccal microwear on cheek teeth in well-documented Baka pygmies. We then determined if microwear patterns differ among other Pygmy groups (Aka, Mbuti, and Babongo) and between Bantu-speaking farmer and pastoralist populations from past centuries. The buccal dental microwear patterns of Pygmy hunter-gatherers and non-Pygmy Bantu pastoralists show lower scratch densities, indicative of diets more intensively based on nonabrasive foodstuffs, compared with Bantu farmers, who consume larger amounts of grit from stoneground foods. The Baka pygmies showed microwear patterns similar to those of ancient Aka and Mbuti, suggesting that the mechanical properties of their preferred diets have not significantly changed through time. In contrast, Babongo pygmies showed scratch densities and lengths similar to those of the farmers, consistent with sociocultural contacts and genetic factors. Our findings support that buccal microwear patterns predict dietary habits independent of ecological conditions and reflect the abrasive properties of preferred or fallback foods such as USOs, which may have contributed to the dietary specializations of ancient human populations.     

Feeding Ecology in Oligocene Mylodontoid Sloths (Mammalia,Xenarthra) as Revealed by Orthodentine Microwear Analysis

Recently, dental microwear analysis has been successfully employed to xenarthran teeth. Here, we present new data on use wear features on 16 molariforms of Orophodon hapaloides and Octodontotherium grande. These taxa count among the earliest sloths and are known from the Deseadan SALMA (late Oligocene). Modern phylogenetic analyses classify Octodontotherium and Orophodon within Mylodontoidea with whom they share lobate cheek teeth with an outer layer of cementum and a thick layer of orthodentine. Similar target areas of 100μm² were analyzed on the orthodentine surface of each tooth by stereomicroscopic microwear and by SEM microwear. Results were unlike those of extant sloths (stereomicroscopic microwear: Bradypus, Choloepus) and published data from fossil sloths (SEM microwear: Acratocnus, Megalonyx, Megatherium, Thinobadistes); thus, both approaches independently indicate a different feeding ecology for the Oligocene taxa. The unique microwear results suggest that both taxa fed on plant material with low to moderate intrinsic toughness (foliage, twigs) but also proposes intake of tougher food items (e.g., seeds). Frequent gouging of the tooth surfaces can be explained by exogenous influence on microwear, such as possible intake of abrasive grit. We suggest an unspecialized herbivorous diet for Octodontotherium and Orophodon utilizing diverse food resources of their habitat. These interpretations support the reconstruction of (1) Deseadan environments as open habitats with spreading savannas/grasslands and (2) both taxa as wide-muzzled bulk feeders at ground level.     

Dental microwear in the orthodentine of the Xenarthra (Mammalia) and its use in reconstructing the palaeodiet of extinct taxa: the case study of Nothrotheriops shastensis (Xenarthra,Tardigrada, Nothrotheriidae)

The utility of orthodentine microwear analysis as a proxy for dietary reconstruction in xenarthrans (tree sloths, armadillos) was quantitatively and statistically accessed via low‐magnification stereomicroscopy. Features such as number of scratches and pits, as well as presence of gouges, hypercoarse scratches, > four large pits, > four cross scratches, and fine, mixed or coarse scratch texture were recorded in 255 teeth from 20 extant xenarthran species. Feature patterns are consistent with scar formation through abrasional (tooth–food) and attritional (tooth–tooth) contact. Number of scratches is the most dietary diagnostic microwear variable for xenarthrans, with herbivorous sloths characterized by > ten scratches and nonherbivorous armadillos by < ten scratches. Discriminant function analysis differentiated arboreal folivores (sloths) and frugivore‐folivores (sloths) both from each other and from fossorial carnivore‐omnivores (armadillos) and insectivores (armadillos). Microwear patterns in carnivore‐omnivores and insectivores are difficult to distinguish between; armadillo microwear may reflect a fossorial lifestyle (grit consumption) rather than primary diet. Cabassous centralis is anomalous in its microwear signal relative to all other insectivores. To test the utility of orthodentine microwear analysis as an indicator of palaeodiet in extinct xenarthrans, microwear in the ground sloth Nothrotheriops shastensis was quantitatively and statistically compared to microwear in extant taxa. Microwear patterns in N. shastensis are most comparable to extant folivores based on scratch number and hierarchical cluster analysis. This strongly supports an herbivorous diet for N. shastensis that is corroborated by multiple independent lines of evidence. Thus, orthodentine microwear analysis can be used to reconstruct diet in extinct xenarthrans. © 2009 The Linnean Society of London, Zoological Journal of the Linnean Society, 2009, 156 , 201–222.     

Dental microwear texture and anthropoid diets

Dental microwear has long been used as evidence concerning the diets of extinct species. Here, we present a comparative baseline series of dental microwear textures for a sample of 21 anthropoid primate species displaying interspecific and intraspecific dietary variability. Four dental microwear texture variables (complexity, anisotropy, textural fill volume, and heterogeneity) were computed based on scale-sensitive fractal analysis and high-resolution three-dimensional renderings of microwear surfaces collected using a white-light confocal profiler. The purpose of this analysis was to assess the extent to which these variables reflect variation in diet. Significant contrasts between species with diets known to include foods with differing material properties are clearly evident for all four microwear texture variables. In particular, species that consume more tough foods, such as leaves, tended to have high levels of anisotropy and low texture complexity. The converse was true for species including hard and brittle items in their diets either as staples or as fallback foods. These results reaffirm the utility of dental microwear texture analysis as an important tool in making dietary inferences based on fossil primate samples.     

Dental microwear and diets of African early Homo

Conventional wisdom ties the origin and early evolution of the genus Homo to environmental changes that occurred near the end of the Pliocene. The basic idea is that changing habitats led to new diets emphasizing savanna resources, such as herd mammals or underground storage organs. Fossil teeth provide the most direct evidence available for evaluating this theory. In this paper, we present a comprehensive study of dental microwear in Plio-Pleistocene Homo from Africa. We examined all available cheek teeth from Ethiopia, Kenya, Tanzania, Malawi, and South Africa and found 18 that preserved antemortem microwear. Microwear features were measured and compared for these specimens and a baseline series of five extant primate species (Cebus apella, Gorilla gorilla, Lophocebus albigena, Pan troglodytes, and Papio ursinus) and two protohistoric human foraging groups (Aleut and Arikara) with documented differences in diet and subsistence strategies. Results confirmed that dental microwear reflects diet, such that hard-object specialists tend to have more large microwear pits, whereas tough food eaters usually have more striations and smaller microwear features. Early Homo specimens clustered with baseline groups that do not prefer fracture resistant foods. Still, Homo erectus and individuals from Swartkrans Member 1 had more small pits than Homo habilis and specimens from Sterkfontein Member 5C. These results suggest that none of the early Homo groups specialized on very hard or tough foods, but that H. erectus and Swartkrans Member 1 individuals ate, at least occasionally, more brittle or tough items than other fossil hominins studied.     

Dental microwear in anubis and hybrid baboons (Papio hamadryas, sensu lato) living in Awash National Park, Ethiopia

We describe dental microwear in baboons (Papio hamadryas sensu lato) from the anubis-hamadryas hybrid zone of Awash National Park, Ethiopia, outline its variation with sex and age, and attempt to relate the observed microwear pattern to environment and diet. Casts of the maxillary second molar of 52 adult and subadult individuals of both sexes were examined with a scanning electron microscope at x 500. Digitized micrographs were taken at a consistent location on facet 9, and microwear was recorded with an image analysis software package. Univariate and multivariate statistics were used to investigate the shape, size, and density of microwear features. The overall pattern of microwear exhibits an unusual combination of high feature density, with numerous small pits and relatively wide striations, and a high correlation between width of pits and striations across individuals. We interpret this pattern as predominantly the consequence of abrasion by relatively small-caliber environmental grit when accidentally ingested with tough foods such as dried seeds and fruits, as expected in a terrestrial omnivore living in a dusty habitat. Statistical analysis revealed no significant differences between groups defined by sex, age, or troop membership, a result consistent with qualitative observations of feeding habits in this population, and which lends no support to the hypothesis that the longer jaws of adult males should result in longer striations. A trend towards greater feature density in females, however, might be due to limited sexual dinichism, and merits further investigation.     

Differences in Tooth Microwear of Populations of Caribou (<Emphasis Type="Italic">Rangifer tarandus</Emphasis>, Ruminantia,Mammalia) and Implications to Ecology,Migration, Glaciations and Dental Evolution

Tooth microwear was analyzed for a large sample of wild-shot barren-ground caribou (Rangifer tarandus groenlandicus) from the Kaminuriak population of eastern Canada. This sample was compared to the microwear of specimens from three Pleistocene localities in North America (Alaska) and western Europe (Caune de l’Arago in France and Salzgitter in Germany). The results show that the extant samples from eastern Canada have seasonal variation in microwear and presumably in diet. The differences in microwear between the various seasons may reflect a cyclic migration of the population within a year. The extinct population from Alaska has extremely blunt teeth (mesowear), as blunt as those of modern zebras and bison. This observation is corroborated by the lowest number of microwear pits. The findings are untypical, as most typical caribou teeth have sharper apices, and we interpret this as an indication of a local habitat that was different with animals feeding on non-typical vegetation. The combination of Rangifer from Caune de l’Arago and Salzgitter reveals a pattern in microwear variability. The Salzgitter is interglacial and shows a greater diversity of browsing (broad spectrum on average number of pits) than the glacial Caune de l’Arago. The interglacial population from Salzgitter is interesting because it shows several different types of browsing. Collectively all the Rangifer teeth show that diet of a brachydont taxon can vary across most of the dietary morphospace of ungulates as represented by tooth microwear. The three Pleistocene samples exhibit microwear that is different from the extant population in question. This observation implies that the recent diet of Rangifer has changed from the typical caribou diet in the past. This indicates dietary change within a species. This is important because it represents dietary evolution without changes in tooth morphology.     

牙齿微痕研究在古食性重建中应用的简述

在古食性研究中,牙齿微痕是指动物在咀嚼食物的过程中在牙齿咬合面上产生的微观磨损痕迹。不同食性的动物具有不同的牙齿微痕特征,因此可以通过研究牙齿微痕特征来重建灭绝动物的古食性,为探讨动物演化和古生态环境变化提供重要信息。本文主要介绍牙齿微痕作为一种简单而高效的古食性重建方法在古生物领域中的应用。本文主要内容包括牙齿微痕的发展历史,形成机理与应用,以及近年来被广泛应用的牙齿微痕定量化分析——表面纹理分析法,并在最后浅谈了牙齿微痕研究未来可能研究的方向。     

Seasonal Mortality Patterns in Primates: Implications for the Interpretation of Dental Microwear

The microscopic traces of use wear on teeth have been extensively studied to provide information that will assist in elucidating the dietary habits of extinct hominin species. 1 - 13 It has been amply documented that dental microwear provides information pertaining to diet for living animals, where there is a strong and consistent association between dental microwear patterns and different types of foods that are chewed. The details of occlusal surface wear patterns are capable of distinguishing among diets when the constituent food items differ in their fracture properties. 14 - 20 For example, the microwear traces left on the teeth of mammals that crush hard, brittle foods such as nuts are generally dominated by pits, whereas traces left on the teeth of mammals that shear tough items such as leaves tend to be characterized by scratches. These microwear features result from and thus record actual chewing events. As such, microwear patterns are expected to be variably ephemeral, as individual features are worn away and replaced or overprinted by others as the tooth wears down in subsequent bouts of mastication. Indeed, it has been demonstrated, both in the laboratory and the wild, that short‐term dietary variation can result in the turnover of microwear. 17 , 21 - 23 Because occlusal microwear potentially reflects an individual's diet for a short time (days, weeks, or months, depending on the nature of the foods being masticated), tooth surfaces sampled at different times will display differences that relate to temporal (for example, seasonal) differences in diet. 24     

Technical note: Artificial Resynthesis Technology for the experimental formation of dental microwear textures

Dental microwear formation on the posterior dentition is largely attributed to an organism's diet. However, some have suggested that dietary and environmental abrasives contribute more to the formation process than food, calling into question the applicability of dental microwear to the reconstruction of diet in the fossil record. Creating microwear under controlled conditions would benefit this debate, but requires accurately replicating the oral environment. This study tests the applicability of Artificial Resynthesis Technology (ART 5) to create microwear textures while mitigating the challenges of past research. ART 5 is a simulator that replicates the chewing cycle, responds to changes in food texture, and simulates the actions of the oral cavity. Surgically extracted, occluding pairs of third molars (n = 2 pairs) were used in two chewing experiments: one with dried beef and another with sand added to the dried beef. High-resolution molds were taken at 0, 50, 100, 2500, and 5000 simulated chewing cycles, which equates to approximately 1 week of chewing. Preliminary results show that ART 5 produces microwear textures. Meat alone may produce enamel prism rod exposure at 5000 cycles, although attrition cannot be ruled out. Meat with sand accelerates the wear formation process, with enamel prism rods quickly obliterated and “pit-and-scratch” microwear forming at approximately 2500 cycles. Future work with ART 5 will incorporate a more thorough experimental protocol with improved controls, pH of the simulated oral environment, and grit measurements; however, these results indicate the potential of ART 5 in untangling the complex variables of dental microwear formation.     

Terrestrial foraging and dental microwear inPapio ursinus

Dental microwear of ten wild-shot chacma baboons (Papio urinus) form Northwest and Northern Privinces, South Africa was examined by scanning electron microscopy. All specimens were collected during the dry season, during which these primates exploit hypogeous (underground) food items, including tubers and corms. The microwear fabric of thisP. ursinus sample is characterized by high pitting frequencies and large microwear features. It differs significantly from those displayed by other terrestrially foraging papionins of the genusTheropithecus. Exogenous grit is hypothesized to be largely responsible for the observedP. ursinus wear pattern, which resembles the microwear profiles of durophagous primates. It is suggested that large microwear features and a high incidence of enamel pitting, which are generally held to represent a microwear “signature” of durophagy, may not always be indicative of hard-object feeding in anthropoid primates.     

Molar microwear of subfossil lemurs: improving the resolution of dietary inferences

In this study we use molar microwear analyses to examine the trophic distinctions among various taxa of Malagasy subfossil lemurs. High resolution casts of the teeth of Megaladapis, Archaeolemur, Palaeopropithecus, Babakotia, and Hadropithecus were examined under a scanning electron microscope. Megaladapis was undoubtedly a browsing folivore, but there are significant differences between species of this genus. However, dietary specialists appear to be the exception; for example, Palaeopropithecus and Babakotia probably supplemented their leaf-eating with substantial amounts of seed-predation, much like modern indrids. Hadropithecus was decidedly not like the modern gelada baboon, but probably did feed on hard objects. Evidence from microwear and coprolites suggests that Archaeolemur probably had an eclectic diet that differed regionally and perhaps seasonally. Substantial trophic diversity within Madgascar's primate community was diminished by the late Quaternary extinctions of the large-bodied species (>9 kg).     

Non-masticatory uses of anterior teeth of Sima de los Huesos individuals (Sierra de Atapuerca, Spain)

In this study we examine the labial and occlusal surfaces of incisors and canines of hominins recovered from the Sima de los Huesos (SH), middle Pleistocene site, in order to establish the possible extra-masticatory use of anterior teeth. We have compared the microwear of these fossils with microwear from the anterior teeth of Australian Aborigines, a population characterized by ethnographic evidence of the use of their teeth as a third hand. These two samples of teeth were microscopically analyzed using Scanning Electron Microscopy (SEM). Our results support the “cultural” origin of microwear observed on fossil teeth: we conclude that the SH hominins used their anterior teeth as a “third hand” for para- or extra-masticatory activities.     

Quantitative differences in dental microwear between primate species with different diets and a comment on the presumed diet of Sivapithecus

Studies of dental microwear have been used to relate tooth form to function in a variety of recent and extinct mammals. Probably the most important aspect of microwear analysis is the possibility of using it to deduce the diet of extinct animals. Such deductions must be based on comparative studies of modern species with known diets, but to date, only qualitative studies have been attempted and all have been based on small samples. Here we report quantitative differences in dental microwear between primate species that are known to have different diets. Occlusal facets with different functions have previously been shown to exhibit different microwear patterns. However, the differences between facets of one species are shown to be far less than those between homologous facets of different species. Study of seven species of extant primates shows that enamel microwear can be used to distinguish between those with a mainly frugivorous diet and those with a mainly folivorous one. Microwear can also distinguish hard-object feeders from soft-fruit eaters. The microwear of Miocene Sivapithecus indicus cannot be distinguished statistically from that of the chimpanzee, but it is different from that of the other species. On this evidence S. indicus was not a hard-object feeder and the adaptive significance of its thick molar enamel is at present unknown.