Expression and purification of recombinant proteins from Escherichia coli: Comparison of an elastin-like polypeptide fusion with an oligohistidine fusion

Thermally responsive elastin like polypeptides (ELPs) can be used to purify proteins from Escherichia coli culture when proteins are expressed as a fusion with an ELP. Nonchromatographic purification of ELP fusion proteins, termed inverse transition cycling (ITC), exploits the reversible soluble-insoluble phase transition behavior imparted by the ELP tag. Here, we quantitatively compare the expression and purification of ELP and oligohistidine fusions of chloramphenicol acetyltransferase (CAT), blue fluorescent protein (BFP), thioredoxin (Trx), and calmodulin (CalM) from both a 4-h culture with chemical induction of the plasmid-borne fusion protein gene and a 24-h culture without chemical induction. The total protein content and functional activity were quantified at each ITC purification step. For CAT, BFP, and Trx, the 24-h noninduction culture of ELP fusion proteins results in a sevenfold increase in the yield of each fusion protein compared to that obtained by the 4-h-induced culture, and the calculated target protein yield is similar to that of their equivalent oligohistidine fusion. For these proteins, ITC purification of fusion proteins also results in approximately 75% recovery of active fusion protein, similar to affinity chromatography. Compared to chromatographic purification, however, ITC is inexpensive, requires no specialized equipment or reagents, and because ITC is a batch purification process, it is easily scaled up to accommodate larger culture volumes or scaled down and multiplexed for high-throughput, microscale purification; thus, potentially impacting both high-throughput protein expression and purification for proteomics and large scale, cost-effective industrial bioprocessing of pharmaceutically relevant proteins.     

Isoelectric point (pI)-based phase separation (pI-BPS) purification of elastin-like polypeptides (ELPs) containing charged,biologically active fusion proteins (ELP-FPs)

Elastin-like polypeptides (ELPs) are peptide-based biomaterials with residue sequence (VPGXG)n where X is any residue except proline. ELPs are a useful modality for delivering biologically active proteins (growth factors, protease inhibitors, anti-inflammatory peptides, etc.) as fusion proteins (ELP-FP). ELP-FPs are particularly cost-effective because they can be rapidly purified using Inverse Temperature Cycling (ITC) via the reversible formation and precipitation of entropically driven aggregates above a transition temperature (T_t). When ELP fusion proteins (ELP-FPs) contain significant charge density at physiological pH, electrostatic repulsion between them severely inhibits aggregate formation. The literature does not currently describe methods for purifying ELP-FPs containing charged proteins on either side of the ELP sequence as fusion partners without organic solvents. Here, the isoelectric point (pI) of ELP-FPs is discussed as a means of neutralizing surface charges on ELP-FPs and increasing ITC yield to dramatically high levels. We use pI-based phase separation (pI-BPS) to purify ELP-FPs containing cationic and anionic fusion proteins. We report a dramatic increase in protein yield when using pI-BPS for purification of ELP-FPs. Proteins purified by this method also retain the functional activity of the protein present in the ELP-FP. Techniques developed here enable significant diversification of possible fusion proteins delivered by ELPs as ELP-FPs by allowing them to be produced and purified at higher quantities and yields.     

Protein purification by fusion with an environmentally responsive elastin-like polypeptide: effect of polypeptide length on the purification of thioredoxin

Elastin-like polypeptides (ELPs) undergo a reversible, soluble-to-insoluble phase transition in aqueous solution upon heating through a characteristic transition temperature (T(t)). Incorporating a terminal ELP expression tag into the gene of a protein of interest allows ELP fusion proteins to be purified from cell lysate by cycles of environmentally triggered aggregation, separation from solution by centrifugation, and resolubilization in buffer. In this study, we examine the effect of ELP length on the expression and purification of a thioredoxin-ELP fusion protein and show that reducing the size of the ELP tag from 36 to 9 kDa increases the expression yield of thioredoxin by 4-fold, to a level comparable to that of free thioredoxin expressed without an ELP tag, while still allowing efficient purification. However, truncation of the ELP tag also results in a more complex transition behavior than is observed with larger tags. For both the 36 kDa and the 9 kDa ELP tag fused to thioredoxin, dynamic light scattering showed that large aggregates with hydrodynamic radii of approximately 2 microm form as the temperature is raised to above the T(t). These aggregates persist at all temperatures above the T(t) for the thioredoxin fusion with the 36 kDa ELP tag. With the 9 kDa tag, however, smaller particles with hydrodynamic radii of approximately 12 nm begin to form at the expense of the larger, micron-size aggregates as the temperature is further raised above the T(t). Because only large aggregates can be effectively retrieved by centrifugation, efficient purification of fusion proteins with short ELP tags requires selection of solution conditions that favor the formation of the micron-size aggregates. Despite this additional complexity, our results show that the ELP tag can be successfully truncated to enhance the yield of a target protein without compromising its purification.     

以类弹性蛋白多肽为标签的表达质粒构建及其用于木聚糖酶的非色谱纯化

【目的】旨在构建一个能以非色谱纯化目标蛋白的表达质粒,使用自行设计的类弹性蛋白多肽(ELPs)作为非色谱纯化标签,以纯化目标蛋白。该ELPs长度短,对盐非常敏感。【方法】从头设计了木聚糖酶,将其通过一段无规则卷曲同ELPs相连,合成了编码上述序列的基因,并构建重组表达载体pET-22b-SoxB-M2-S-ELP,转化至大肠杆菌BLR(DE3)中诱导表达,采用可逆相变循环经高速离心纯化木聚糖酶,并考察纯酶的酶学性质。【结果】成功构建了表达载体并表达,在pH=7.0时0.5 mol/L碳酸钠可使ELPs的相变温度降至22℃。在上述条件下,对木聚糖酶进行了非色谱纯化,其纯化倍数为3.2,回收率为21.2%,纯度为64.3%。经测定,未连接ELPs的酶、粗酶及纯化酶学性质基本一致,其最适温度为60℃,最适pH为6.0,最适反应时间为30 min,粗酶70℃保温1 h相对酶活仍有50%,为嗜热木聚糖酶,与预期相符。【结论】ELPs作为非色谱纯化标签纯化重组木聚糖酶具有操作简单、易于放大、成本较低的优势,故所构建的重组质粒可望通用于分离多种重组蛋白,具有较广泛的用途。     

Effect of detergents on the thermal behavior of elastin‐like polypeptides

Elastin‐like polypeptide (ELP) fusions have been designed to allow large‐scale, nonchromatographic purification of many soluble proteins by using the inverse transition cycling (ITC) method; however, the sensitivity of the aqueous lower critical solubility phase transition temperature (T_t) of ELPs to the addition of cosolutes, including detergents, may be a potential hindrance in purification of proteins with surface hydrophobicity in such a manner. To identify detergents that are known to solubilize such proteins (e.g., membrane proteins) and that have little effect on the T_t of the ELP, we screened a number of detergents with respect to their effects on the T_t and secondary structures of a model ELP (denoted here as ELP180). We found that mild detergents (e.g., n‐dodecyl‐β‐D ‐maltoside, Triton‐X100, and 3‐[(3‐cholamidopropyl) dimethylamino]‐1‐propanesulfonate) do not alter the phase transition behavior or structure (as probed by circular dichroism) of ELP180. This result is in contrast to previous studies that showed a strong effect of other detergents (e.g., sodium dodecylsulfate) on the T_t of ELPs. Our results clearly indicate that mild detergents do not preclude ITC‐based separation of ELPs, and thus that ELP fusions may prove to be useful in the purification of detergent‐solubilized recombinant hydrophobic proteins, including membrane proteins, which are otherwise notoriously difficult to extract and purify by conventional separation methods (e.g., chromatography). © 2012 Wiley Periodicals, Inc.     

Elastin-like polypeptides as a promising family of genetically-engineered protein based polymers

Elastin-like polypeptides (ELP) are artificial, genetically encodable biopolymers, belonging to elastomeric proteins, which are widespread in a wide range of living organisms. They are composed of a repeating pentapeptide sequence Val–Pro–Gly–Xaa–Gly, where the guest residue (Xaa) can be any naturally occurring amino acid except proline. These polymers undergo reversible phase transition that can be triggered by various environmental stimuli, such as temperature, pH or ionic strength. This behavior depends greatly on the molecular weight, concentration of ELP in the solution and composition of the amino acids constituting ELPs. At a temperature below the inverse transition temperature (T_t), ELPs are soluble, but insoluble when the temperature exceeds T_t. Furthermore, this feature is retained even when ELP is fused to the protein of interest. These unique properties make ELP very useful for a wide variety of biomedical applications (e.g. protein purification, drug delivery etc.) and it can be expected that smart biopolymers will play a significant role in the development of most new materials and technologies. Here we present the structure and properties of thermally responsive elastin-like polypeptides with a particular emphasis on biomedical and biotechnological application.     

Heterologous expression and optimized one-step separation of levansucrase via elastin-like polypeptides tagging system

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli DH5alpha at 37 degrees C for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at 20 degrees C in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature (Tt) of levansucrase-ELP[V-40] was 17 degrees C with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.     

Effects of short elastin‐like peptides on filamentous particles and their transition behavior

While elastin‐like polypeptides and peptides (ELPs) have been used for various stimulus‐responsive applications, details of their switching remain unclear. We therefore constructed a novel series of filamentous phage particles displaying a high surface density of short ELPs. The surface display of ELPs did not disrupt either particle shape or dimensions, and the resulting ELP‐phage particles were colloidally stable over several weeks. However, in spite of a saturating surface density, macroscopic aggregation of ELP‐phages cannot be triggered in water. To investigate the underlying mechanisms we examined conformational changes in the secondary structure of the phage proteins by circular dichroism and tryptophan fluorescence, which indicate partial protein unfolding in ELP‐phage particles. To gain further insight into the ELP itself, analogous “free” ELP peptides were synthesized and characterized. Circular dichroism of these peptides shows the onset of β‐type conformations with increasing temperature, consistent with the accepted view of the microscopic transition that underlies the inverse phase behavior of ELPs. Increased guest residue hydrophobicity was found to depress the microscopic transition temperature of the peptides, also consistent with a previously proposed intramolecular hydrogen‐bonding mechanism. Importantly, our results indicate that although the nanoscale presentation state can suppress macroscopic aggregation of ELPs, microscopic transitions of the ELP can still occur. Given the growing use of ELPs within supra‐molecular scaffolds, such effects are important design considerations for future applications. Biotechnol. Bioeng. 2013; 110: 1822–1830. © 2013 Wiley Periodicals, Inc.     

Purification of recombinant proteins by fusion with thermally-responsive polypeptides.

Elastin-like polypeptides (ELPs) undergo a reversible, inverse phase transition. Below their transition temperature (Tt), ELPs are soluble in water, but when the temperature is raised above Tt, phase transition occurs, leading to aggregation of the polypeptide. We demonstrate a method for purification of soluble fusion proteins incorporating an ELP tag. Advantages of this method, termed "inverse transition cycling," include technical simplicity, low cost, ease of scale-up, and capacity for multiplexing. More broadly, the ability to environmentally modulate the physicochemical properties of recombinant proteins by fusion with ELPs will allow diverse applications in bioseparation, immunoassays, biocatalysis, and drug delivery.     

Optimization of elastin‐like polypeptide fusions for expression and purification of recombinant proteins in plants

The demand for recombinant proteins for medical and industrial use is expanding rapidly and plants are now recognized as an efficient, inexpensive means of production. Although the accumulation of recombinant proteins in transgenic plants can be low, we have previously demonstrated that fusions with an elastin‐like polypeptide (ELP) tag can significantly enhance the production yield of a range of different recombinant proteins in plant leaves. ELPs are biopolymers with a repeating pentapeptide sequence (VGVPG)_n that are valuable for bioseparation, acting as thermally responsive tags for the non‐chromatographic purification of recombinant proteins. To determine the optimal ELP size for the accumulation of recombinant proteins and their subsequent purification, various ELP tags were fused to green fluorescent protein, interleukin‐10, erythropoietin and a single chain antibody fragment and then transiently expressed in tobacco leaves. Our results indicated that ELP tags with 30 pentapeptide repeats provided the best compromise between the positive effects of small ELP tags (n = 5–40) on recombinant protein accumulation and the beneficial effects of larger ELP tags (n = 80–160) on recombinant protein recovery during inverse transition cycling (ITC) purification. In addition, the C‐terminal orientation of ELP fusion tags produced higher levels of target proteins, relative to N‐terminal ELP fusions. Importantly, the ELP tags had no adverse effect on the receptor binding affinity of erythropoietin, demonstrating the inert nature of these tags. The use of ELP fusion tags provides an approach for enhancing the production of recombinant proteins in plants, while simultaneously assisting in their purification. Biotechnol. Bioeng. 2009;103: 562–573. © 2009 Wiley Periodicals, Inc.     

黄鳍金枪鱼抗菌肽YFGAP在大肠杆菌中融合表达及其活性检测

【目的】抗菌肽YFGAP由32个氨基酸组成,分子量为3.4 kD,对革兰氏阳性菌(G+)和革兰氏阴性菌(G?)表现出强效的抑制作用,不具有溶血活性。在大肠杆菌中表达抗菌肽YFGAP,分离纯化抗菌肽并鉴定其生物学活性。【方法】化学合成EK-YFGAP和L-EK-YFGAP基因序列,构建表达载体pET22b-ELP20-EK-YFGAP、pET22b-ELP40-EK-YFGAP和pET22b-ELP40-L-EK- YFGAP,分别转化至大肠杆菌BL21(DE3)中诱导表达,可逆相变循环纯化融合蛋白。肠激酶酶切,经Vivaspin Turbo纯化柱纯化,测定重组抗菌肽的抑菌活性和溶血活性。【结果】纯化出两种融合蛋白ELP40-EK-YFGAP和ELP40-L-EK-YFGAP,肠激酶酶切纯化后获得重组抗菌肽YFGAP,对4种病原菌均有抑制效果,溶血活性较低。【结论】以ELPs作为非色谱纯化标签,实现了抗菌肽YFGAP的融合表达,具有操作简单、成本低、易于扩大的优势,为重组抗菌肽的量化制备及应用提供了理论基础和技术支持。     

Thermal behaviors of elastin-like polypeptides (ELPs) according to their physical properties and environmental conditions

Elastin-like polypeptides (ELPs) have a distinctive thermal property, transition temperature (T_t), which leads to phase transition. This thermal property depends on the molecular weight (MW) of ELP, ELP concentration, composition of the amino acids constituting ELPs, and ionic strength of the aqueous solution. In order to investigate the effects of ELP length, ionic strength and existence of fusion protein, ELP genes of three different sizes were cloned using the recursive directional ligation (RDL) method and expressed in Escherichia coli. Following purification, thermal behaviors of ELPs were monitored using a spectrophotometer with temperature scanning. The results of our study indicated that T_t shifted to low in accordance with ELP length or increased ionic strength. Additionally, it was observed that T_t was affected by the physical properties of the protein fused with ELPs.     

Fusion order controls expression level and activity of elastin‐like polypeptide fusion proteins

We have previously developed a method to purify recombinant proteins, termed inverse transition cycling (ITC) that eliminates the need for column chromatography. ITC exploits the inverse solubility phase transition of an elastin‐like polypeptide (ELP) that is fused to a protein of interest. In ITC, a recombinant ELP fusion protein is cycled through its phase transition, resulting in separation of the ELP fusion protein from other Escherichia coli contaminants. Herein, we examine the role of the position of the ELP in the fusion protein on the expression levels and yields of purified protein for four recombinant ELP fusion proteins. Placing the ELP at the C‐terminus of the target protein (protein‐ELP) results in a higher expression level for the four ELP fusion proteins, which also translates to a greater yield of purified protein. The position of the fusion protein also has a significant impact on its specific activity, as ELP‐protein constructs have a lower specific activity than protein‐ELP constructs for three out of the four proteins. Our results show no difference in mRNA levels between protein‐ELP and ELP‐protein fusion constructs. Instead, we suggest two possible explanations for these results: first, the translational efficiency of mRNA may differ between the fusion protein in the two orientations and second, the lower level of protein expression and lower specific activity is consistent with a scenario that placement of the ELP at the N‐terminus of the fusion protein increases the fraction of misfolded, and less active conformers, which are also preferentially degraded compared to fusion proteins in which the ELP is present at the C‐terminal end of the protein.     

Secretion of elastin-like polypeptides with different transition temperatures by Pichia pastoris

Like natural tropoelastin, polypeptides based on an elastin-like VPGXG repeat have a characteristic inverse temperature response, which leads to coacervate formation above a certain transition temperature and which could be useful for a variety of applications. The key advantage of elastin-like polypeptides (ELPs) over (tropo)elastin is a full control over this temperature response by adjustment of either the amino acid composition or the chain length, according to insights provided by extensive research. Future application of ELPs will require efficient ELP production systems, and in a previous article, we described the successful use of Pichia pastoris for secreted production of an ELP, with an overall yield of ≈ 200 mg L(-1). In this study, we investigated the influence of changed amino acid composition and chain length on the yield of secreted ELP. We have found that both parameters have a distinct impact on the overall yield, with higher yield for shorter and more hydrophilic ELPs. Because yield and transition temperature (Tt) thus appear to be positively correlated, we hypothesize that good solubility of ELP below the Tt promotes the secreted production and coacervate formation above Tt decreases it.     

Thermally triggered purification and immobilization of elastin-OPH fusions

A bifunctional fusion protein consisting of organophosphorus hydrolase (OPH) and elastin-like polypeptide (ELP) was synthesized for the detoxification of organophosphorus compounds. ELPs undergo a reversible phase transition upon an increase in temperature, forming hydrophobic aggregates. This thermally triggered property of phase transition allows for a simple and rapid means of purifying the fusion protein. Over 1,300-fold purification was achieved after only 2 cycles of inverse phase transition. The purified fusion protein showed identical kinetic properties as the native OPH with only a modest 10% increase in K(m) and a 5% decrease of K(cat). The ability of the ELP domain to form collapsed aggregates also improved long-term stability of the fusion enzyme. Aggregated ELP-OPH retained nearly 100% activity over a span of three weeks. In addition to facilitating purification and stability, the ELP moiety served as a hydrophobic tag for one-step immobilization of the fusion protein onto hydrophobic surfaces. The ELP-OPH was capable of rapidly degrading paraoxon while immobilized. The protein also retained ELP functionality of reversible phase transition thereby allowing for the regeneration of the treated surface. This technology offers a swift and convenient means for purification, immobilization, and regeneration of OPH onto a variety of hydrophobic surfaces by simple environmental triggers.     

One-step metal-affinity purification of histidine-tagged proteins by temperature-triggered precipitation

The feature of elastin-like proteins (ELPs) to reversibly precipitate above their transition temperature was exploited as a general method for the purification of histidine (His)-tagged proteins. The principle of the single-step metal-affinity method is based on coordinated ligand-bridging between the modified ELPs and the target proteins. ELPs with repeating sequences of [(VPGVG)(2)(VPGKG)(VPGVG)(2)](21) were synthesized and the free amino groups on the lysine residues were modified by reacting with imidazole-2-carboxyaldehyde to incorporate the metal-binding ligands into the ELP bio- polymers. Biopolymers charged with Ni(2+) were able to interact with a His tag on the target proteins based on metal coordination chemistry. Purifications of two His-tagged enzymes, beta-D-galactosidase and chloramphenicol acetyltransferase, were used to demonstrate the utility of this general method and over 85% recovery was observed in both cases. The bound enzymes were easily released by addition of either EDTA or imidazole. The recovered ELPs were reused four times with no observable decrease in the purification performance.     

Purification of an elastin-like fusion protein by microfiltration

This article describes a simple and potentially scalable microfiltration method for purification of recombinant proteins. This method is based on the fact that when an elastin-like polypeptide (ELP) is fused to a target protein, the inverse phase transition behavior of the ELP tag is imparted to the fusion protein. Triggering the phase transition of a solution of the ELP fusion protein by an increase in temperature, or isothermally by an increase in salt concentration, results in the formation of micron-sized aggregates of the ELP fusion protein. In this article, it is shown that these aggregates are efficiently retained by a microfiltration membrane, while contaminating E. coli proteins passed through the membrane upon washing. Upon reversing the phase transition by flow of Milli-Q water, soluble, pure, and functionally active protein is eluted from the membrane. Proof-of principle of this approach was demonstrated by purifying a fusion of thioredoxin with ELP (Trx-ELP) with greater than 95% recovery of protein and with greater than 95% purity (as estimated from SDS-PAGE gels). The simplicity of this method is demonstrated for laboratory scale purification by purifying Trx-ELP from cell lysate using a syringe and a disposable microfiltration cartridge. The potential scalability of this purification as an automated, continuous industrial-scale process is also demonstrated using a continuous stirred cell equipped with a microfiltration membrane.     

Quantification of the effects of chain length and concentration on the thermal behavior of elastin-like polypeptides

At a specific temperature, elastin-like polypeptides (ELPs) undergo a sharp solubility transition that can be exploited in a variety of applications in biotechnology and medicine. The temperature of the transition varies with ELP sequence, molecular weight, and concentration. We present a single equation of three parameters that quantitatively predicts the transition temperature as a function of ELP length and concentration for an ELP of a fixed composition. This model should be useful both for the design of new ELP sequences that exhibit a desired transition temperature and for the selection of variables to trigger the phase transition of an ELP for a given application.     

Characterization of a genetically engineered elastin-like polypeptide for cartilaginous tissue repair

Elastin-like polypeptides (ELPs) are artificial polypeptides with unique properties that make them attractive as a biomaterial for tissue-engineered cartilage repair. ELPs are composed of a pentapeptide repeat, Val-Pro-Gly-Xaa-Gly (Xaa is any amino acid except Pro), that undergo an inverse temperature phase transition. They are soluble in aqueous solution below their transition temperature (T(t)) but aggregate when the solution temperature is raised above their T(t). This study investigates the rheological behavior of an un-cross-linked ELP, below and above its T(t), and also examines the ability of ELP to promote chondrogenesis in vitro. A thermally responsive ELP with a T(t) of 35 degrees C was synthesized using recombinant DNA techniques. The complex shear modulus of the ELP increased by 3 orders of magnitude as it underwent its inverse temperature phase transition, forming a coacervate, or gel-like, ELP phase. Values for the complex shear moduli of the un-cross-linked ELP coacervate are comparable to those reported previously for collagen, hyaluronan, and cross-linked synthetic hydrogels. Cell culture studies show that chondrocytes cultured in ELP coacervate maintain a rounded morphology and their chondrocytic phenotype, characterized by the synthesis of a significant amount of extracellular matrix composed of sulfated glycosaminoglycans and collagen. These results suggest that ELPs demonstrate great potential for use as in situ forming scaffolds for cartilaginous tissue repair.     

Biodegradation of elastin-like polypeptide nanoparticles

Protein polymers are repetitive polypeptides produced by ribosomal biosynthetic pathways; furthermore, they offer emerging opportunities in drug and biopharmaceutical delivery. As for any polymer, biodegradation is one of the most important determinants affecting how a protein polymer can be utilized in the body. This study was designed to characterize the proteolytic biodegradation for a library of protein polymers derived from the human tropoelastin, the Elastin-like polypeptides (ELPs). ELPs are of particular interest for controlled drug delivery because they reversibly transition from soluble to insoluble above an inverse phase transition temperature (T(t)). More recently, ELP block copolymers have been developed that can assemble into micelles; however, it remains unclear if proteases can act on these ELP nanoparticles. For the first time, we demonstrate that ELP nanoparticles can be degraded by two model proteases and that comparable proteolysis occurs after cell uptake into a transformed culture of murine hepatocytes. Both elastase and collagenase endopeptidases can proteolytically degrade soluble ELPs. To our surprise, the ELP phase transition was protective against collagenase but not to elastase activity. These findings enhance our ability to predict how ELPs will biodegrade in different physiological microenvironments and are essential to develop protein polymers into biopharmaceuticals.