Decrease of proteolytic degradation of recombinant hirudin produced by Pichia pastoris by controlling the specific growth rate

The effects of the specific growth rate and methanol concentration on the degradation of hirudin produced by recombinant Pichia pastoris were investigated. When a methanol-limited state and the specific growth rate of 0.02 h^–1 were maintained during the fermentation, a minimum degradation of hirudin and a maximum specific hirudin production rate were achieved. By this strategy, the production of intact recombinant hirudin Hir65 reached 0.7 g l^–1 in fed-batch fermentation. Its proportion was 35% to all forms of hirudin.     

A model-based feeding strategy for fed-batch fermentation of recombinant Pichia pastoris

A two stage, exponential feeding strategy with mixed glycerol/methanol substrate was used in a fed-batch recombinant Pichia pastorisfermentation. The feeding strategy was developed using a simple model based on mass balances, Monod-type growth kinetics, and constant specific heterologous protein production rate. The model accurately predicted cell growth, and demonstrated the usefulness of a rational, model-based approach for improving the productivity of recombinant P. pastoris fermentation.     

High cell density fed-batch cultivation of<Emphasis Type="Italic"> Escherichia coli</Emphasis> using exponential feeding combined with pH-stat

A new feeding strategy in fed-batch culture, exponential feeding combined with pH-stat is suggested to avoid the accumulation of substrate in culture broth. Exponential feeding was stopped whenever a predetermined amount of limiting substrate was supplied and then pH change was observed. When pH rose above an upper limit due to the depletion of substrate, feeding was restarted. With this feeding strategy, recombinant Escherichia coli could be grown to 101 g/l by controlling the specific growth rate at 0.1 h^–1.An erratum to this article can be found at     

Influence of culture modes on the microbial production of hyaluronic acid by <Emphasis Type="Italic">Streptococcus zooepidemicus</Emphasis>

The principal objective of this study was to assess the effects of culture modes including batch culture, pulse fed-batch culture, constant feeding rate fed-batch culture, and exponential fed-batch culture on the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Batch cultures had the highest levels of HA productivity, whereas fed-batch cultures were more favorable with regard to cell growth, and exponential fed-batch cultures evidenced the highest cell concentrations. A two-step culture model was proposed to enhance HA production: an exponential fed-batch culture was conducted prior to 8 h and then sucrose supplementation was applied for 8 h to start the batch fermentation of S. zooepidemicus. HA production and productivity were increased by 36 and 37% in the proposed two-step culture process as compared with that observed in the batch culture, respectively. The proposed two-step culture model can be applied in the production of secondary metabolites, and particularly of the exopolysaccharides.     

Application of recurrent neural network for online prediction of cell density of recombinant Pichia pastoris producing HBsAg

Abstract

Artificial neural networking (ANN) seems to be a promising soft sensor for implementing current approaches of quality by design (QbD) and process analytical technologies (PAT) in the biopharmaceutical industry. In this study, we aimed to implement best-fitted ANN architecture for online prediction of the biomass amount of recombinant Pichia pastoris (P. pastoris) – expressing intracellular hepatitis B surface antigen (HBsAg) – during the fed-batch fermentation process using methanol as a sole carbon source. For this purpose, at the induction phase of methanol fed-batch fermentation, carbon evolution rate (CER), dissolved oxygen (DO), and methanol feed rate were selected as input vectors and total wet cell weight (WCW) was considered as output vector for the ANN. The obtained results indicated that after training recurrent ANN with data sets of four fed-batch runs, this toolbox could predict the WCW of the next fed-batch fermentation process at each specified time point with high accuracy. The R-squared and root-mean-square error between actual and predicted values were found to be 0.9985 and 13.73, respectively. This verified toolbox could have major importance in the biopharmaceutical industry since recombinant P. pastoris is widely used for the large-scale production of HBsAg.     

Production of salmosin, a snake venom-derived disintegrin, in recombinant Pichia pastoris using high cell density fed-batch fermentation

Salmosin, a snake venom-derived disintegrin, was successfully expressed in the methylotrophic yeast Pichia pastoris and secreted into the culture supernatant, as a 6 kDa protein. High-cell density fermentation of recombinant P. pastoris was optimized for the mass production of salmosin. In a 5 L jar fermentor, recombinant P. pastoris was fermented in growth medium containing 5% (w/v) glycerol at the controlled pH of 5.0. After culturing for 21 h, glycerol feeding medium was fed at one time into the culture broth. After 7 h (a total of 28 h), induction medium that contained methanol was increasingly added until the culture time totaled 75 h. Finally, these optimized culture conditions produced a high cell density of recombinant P. pastoris (dry cell weight of 113.38 g/L) and led to the mass production of salmosin (a total protein concentration of 369.2 mg/L). The culture supernatant containing salmosin inhibited platelet aggregation, resulting in a platelet aggregation of 9% compared to that of 94% in the control experiment, without culture supernatant. These results demonstrate that recombinant salmosin in culture supernatant from high cell density fed-batch fermentation can serve as a platelet aggregation inhibitor.     

Growth-associated synthesis of recombinant human glucagon and human growth hormone in high-cell-density cultures of Escherichia coli

Synthesis of two recombinant proteins (human glucagon and human growth hormone) was investigated in fed-batch cultures at high cell concentrations of recombinant Escherichia coli. The glucose-limited growth was achieved without accumulation of metabolic by-products and hence the cellular environment is presumed invariable during growth and recombinant protein synthesis. Via exponential feeding in the two-phase fed-batch operation, the specific cell growth rate was successfully controlled at the desired rates and the fed-batch mode employed is considered appropriate for examining the correlation between the specific growth rate and the efficiency of recombinant product formation in the recombinant E. coli strains. The two recombinant proteins were expressed as fusion proteins and the concentration in the culture broth was increased to 15 g fusion growth hormone l⁻¹ and 7 g fusion glucagon l⁻¹. The fusion growth hormone was initially expressed as soluble protein but seemed to be gradually aggregated into inclusion bodies as the expression level increased, whereas the synthesized fusion glucagon existed as a cytoplasmic soluble protein during the whole induction period. The stressful conditions of cultivation employed (i.e. high-cell-density cultivation at low growth rate) may induce the increased production of various host-derived chaperones and thereby enhance the folding efficiency of synthesized heterologous proteins. The synthesis of the recombinant fusion proteins was strongly growth-dependent and more efficient at a higher specific growth rate. The mechanism linking specific growth rate with recombinant protein productivity is likely to be related to the change in cellular ribosomal content. Received: 27 May 1997 / Received last revision: 31 October 1997 / Accepted: 21 November 1997     

Modeling of <Emphasis Type="Italic">Fusarium redolens</Emphasis> Dzf2 mycelial growth kinetics and optimal fed-batch fermentation for beauvericin production

Beauvericin (BEA) is a cyclic hexadepsipeptide mycotoxin with notable phytotoxic and insecticidal activities. Fusarium redolens Dzf2 is a highly BEA-producing fungus isolated from a medicinal plant. The aim of the current study was to develop a simple and valid kinetic model for F. redolens Dzf2 mycelial growth and the optimal fed-batch operation for efficient BEA production. A modified Monod model with substrate (glucose) and product (BEA) inhibition was constructed based on the culture characteristics of F. redolens Dzf2 mycelia in a liquid medium. Model parameters were derived by simulation of the experimental data from batch culture. The model fitted closely with the experimental data over 20–50 g l⁻¹ glucose concentration range in batch fermentation. The kinetic model together with the stoichiometric relationships for biomass, substrate and product was applied to predict the optimal feeding scheme for fed-batch fermentation, leading to 54% higher BEA yield (299 mg l⁻¹) than in the batch culture (194 mg l⁻¹). The modified Monod model incorporating substrate and product inhibition was proven adequate for describing the growth kinetics of F. redolens Dzf2 mycelial culture at suitable but not excessive initial glucose levels in batch and fed-batch cultures.     

Improving intracellular production of recombinant protein in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using an optimized preinduction glycerol-feeding scheme

High-cell-density production of recombinant growth hormone of Lateolabrax japonicus (rljGH) expressed intracellularly in Pichia pastoris was investigated. In the regular strategy of induction at a cell density of 160 g l⁻¹, short duration of intracellular rljGH accumulation (17 h) resulted in a low final cell density of 226 g l⁻¹. Thus, a novel strategy of induction at a cell density of 320 g l⁻¹ was investigated. In this strategy, the preinduction glycerol-feeding scheme had a significant effect on the post-induction production. Constant glycerol feeding led to a decrease of the specific rljGH production and specific production rate because of low preinduction specific growth rate. This decrease was avoided by exponential glycerol feeding to maintain a preinduction specific growth rate of 0.16 h⁻¹. The results from exponential glycerol feeding indicated that the rljGH production depended on the preinduction specific growth rate. Moreover, mixed feeding of methanol and glycerol during induction improved the specific production rate to 0.07 mg g⁻¹ h⁻¹ from 0.043 mg g⁻¹ h⁻¹. Consequently, both high cell density (428 g l⁻¹) and high rljGH production could be achieved by the novel strategy: growing the cells at the specific growth rate of 0.16 h⁻¹ to the cell density of 320 g l⁻¹ and inducing the expression by mixed feeding.     

Scale-up fermentation of recombinant <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase expressed in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using the GAP promoter

The high-cell-density fermentation of Candida rugosa lipase in the constitutive Pichia pastoris expression system was scaled up from 5 to 800 l in series by optimizing the fermentation conditions at both lab scale and pilot scale. The exponential feeding combined with pH-stat strategy succeeded in small scale studies, while a two-stage fermentation strategy, which shifted at 48 h by fine tuning the culture temperature and pH, was assessed effective in pilot-scale fermentation. The two-stage strategy made an excellent balance between the expression of heterogeneous protein and the growth of host cells, controlling the fermentation at a relatively low cell growth rate for the constitutive yeast expression system to accumulate high-level product. A stable lipase activity of approximately 14,000 IU ml⁻¹ and a cell wet weight of ca. 500 g l⁻¹ at the 800-l scale were obtained. The efficient and convenient techniques suggested in this study might facilitate further scale-up for industrial lipase production.     

Open-loop control of specific growth rate in fed-batch cultures of recombinant E.coli

Summary A computer-based algorithm was used for the open-loop control of specific growth rate in fed-batch cultures of recombinant E.coli.. The control of nutrient feed rate to an exponential trajectory resulted in growth of the culture at a constant specific growth rate. Stable specific growth rates between 0.08 and 0.4 h^–1 were achieved.     

Enhanced truncated-t-PA (CT-b) expression in high-cell-density fed-batch cultures of <Emphasis Type="Italic">Pichia pastoris</Emphasis> through optimization of a mixed feeding strategy by response surface methodology

Recently, Pichia pastoris has been the focal point of interest as an expression system for production of many recombinant proteins. The study and optimization of feeding strategy are of major importance to achieve maximum volumetric productivity in fed-batch cultivations. Among different feeding strategies used in P. pastoris fed-batch cultures, those trying to maintain a constant specific growth rate have usually resulted in superior productivities. The objective of the present study was to investigate and optimize the co-feeding of glycerol and methanol to attain maximum expression of t-PA in P. pastoris fed-batch cultures with constant specific growth rate. The experiments were designed by response surface methodology, considering the specific feeding rates of methanol and glycerol as independent variables. In each experiment, glycerol and methanol were fed according to a predetermined equation to maintain a constant specific growth rate. It was found that with glycerol feeding for higher specific growth rates, the inhibitory properties of glycerol are more pronounced, while the best expression level was achieved when the ratio of µ _set glycerol to that of methanol was around 1.67. In all specific growth rates tested, almost a similar ratio of the specific glycerol feeding rate to that of methanol led to the maximum protein production and activity. The statistical model predicted the optimal operating conditions for µ _set glycerol and that of methanol to be 0.05 and 0.03 h^?1, respectively. Applying the optimum strategy, maximum of 52 g/L biomass, 300 mg/L t-PA and 340,000 IU/mL enzyme activity were obtained.     

Fed-batch high-cell-density fermentation strategies for Pichia pastoris growth and production

Pichia pastoris is extensively used to produce various heterologous proteins. Amounts of biopharmaceutical drugs and industrial enzymes have been successfully produced by fed-batch high-cell-density fermentation (HCDF) of this cell factory. High levels of cell mass in defined media can be easily achieved and therefore large quantities of recombinant proteins with enhanced activities and lower costs can be obtained through HCDF technology. A robust HCDF process makes a successful transition to commercial production. Recently, efforts have been made to increase the heterologous protein production and activity by the HCDF of P. pastoris. However, challenges around selecting a suitable HCDF strategy exist. The high-level expression of a specific protein in P. pastoris is still, at least in part, limited by optimizing the methanol feeding strategy. Here, we review the progress in developments and applications of P. pastoris HCDF strategies for enhanced expression of recombinant proteins. We focus on the methanol induction strategies for efficient fed-batch HCDF in bioreactors, mainly focusing on various stat-induction strategies, co-feeding, and the limited induction strategy. These processes control strategies have opened the door for expressing foreign proteins in P. pastoris and are expected to enhance the production of recombinant proteins.     

Extracellular production of a glycolipid biosurfactant, mannosylerythritol lipid, by Candida sp. SY16 using fed-batch fermentation

Candida sp. strain SY16 produces a glycolipid-type biosurfactant, mannosylerythritol lipid (MEL-SY16), which can reduce the surface tension of a culture broth from 72 to 30 dyne cm⁻¹ and highly emulsify hydrocarbons when cultured in soybean-oil-containing media. As such, laboratory-scale fermentation for MEL-SY16 production was performed using optimized conditions. In batch fermentation, MEL-SY16 was mainly produced during the stationary phase of growth, and the concentration of MEL-SY16 reached 37 g l⁻¹ after 200 h. The effect of pH control on the production of MEL-SY16 was also examined in batch fermentation. The highest production yield of MEL-SY16 was when the pH was controlled at 4.0, and the production was significantly improved compared to batch fermentation without pH control. In fed-batch fermentation, glucose and soybean oil (1:1, w/w) were used in combination as the initial carbon sources for cell growth, and soybean oil was used as the feeding carbon source during the MEL production phase. The feeding of soybean oil resulted in the disappearance of any foam and a sharp increase in the MEL production until 200 h, at which point the concentration of MEL-SY16 was 95 g l⁻¹. Among the investigated culture systems, the highest MEL-SY16 production and volumetric production rate were achieved with fed-batch fermentation.     

Effects of temperature and glycerol and methanol‐feeding profiles on the production of recombinant galactose oxidase in Pichia pastoris

Optimization of protein production from methanol‐induced Pichia pastoris cultures is necessary to ensure high productivity rates and high yields of recombinant proteins. We investigated the effects of temperature and different linear or exponential methanol‐feeding rates on the production of recombinant Fusarium graminearum galactose oxidase (EC 1.1.3.9) in a P. pastoris Mut⁺ strain, under regulation of the AOX1 promoter. We found that low exponential methanol feeding led to 1.5‐fold higher volumetric productivity compared to high exponential feeding rates. The duration of glycerol feeding did not affect the subsequent product yield, but longer glycerol feeding led to higher initial biomass concentration, which would reduce the oxygen demand and generate less heat during induction. A linear and a low exponential feeding profile led to productivities in the same range, but the latter was characterized by intense fluctuations in the titers of galactose oxidase and total protein. An exponential feeding profile that has been adapted to the apparent biomass concentration results in more stable cultures, but the concentration of recombinant protein is in the same range as when constant methanol feeding is employed. © 2014 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 30:728–735, 2014     

A simple Pichia pastoris fermentation and downstream processing strategy for making recombinant pandemic Swine Origin Influenza A virus Hemagglutinin protein

The present Influenza vaccine manufacturing process has posed a clear impediment to initiation of rapid mass vaccination against spreading pandemic influenza. New vaccine strategies are therefore needed that can accelerate the vaccine production. Pichia offers several advantages for rapid and economical bulk production of recombinant proteins and, hence, can be attractive alternative for producing an effective influenza HA based subunit vaccine. The recombinant Pichia harboring the transgene was subjected to fed-batch fermentation at 10 L scale. A simple fermentation and downstream processing strategy is developed for high-yield secretory expression of the recombinant Hemagglutinin protein of pandemic Swine Origin Influenza A virus using Pichia pastoris via fed-batch fermentation. Expression and purification were optimized and the expressed recombinant Hemagglutinin protein was verified by sodium dodecyl sulfate polyacrylamide gel electrophoresis, Western blot and MALDI-TOF analysis. In this paper, we describe a fed-batch fermentation protocol for the secreted production of Swine Influenza A Hemagglutinin protein in the P. pastoris GS115 strain. We have shown that there is a clear relationship between product yield and specific growth rate. The fed-batch fermentation and downstream processing methods optimized in the present study have immense practical application for high-level production of the recombinant H1N1 HA protein in a cost effective way using P. pastoris.     

Investigation of the potential of biocalorimetry as a process analytical technology (PAT) tool for monitoring and control of Crabtree-negative yeast cultures

Biological reaction calorimetry, also known as biocalorimetry, has led to extensive applications in monitoring and control of different bioprocesses. A simple real-time estimator for biomass and growth rate was formulated, based on in-line measured metabolic heat flow values. The performance of the estimator was tested in a unique bench-scale calorimeter (BioRC1), improved to a sensitivity range of 8 mW l^− 1 in order to facilitate the monitoring of even weakly exothermic biochemical reactions. A proportional–integral feedback control strategy based on these estimators was designed and implemented to control the growth rate of Candida utilis, Kluyveromyces marxianus and Pichia pastoris by regulating an exponential substrate feed. Maintaining a particular specific growth rate throughout a culture is essential for reproducible product quality in industrial bioprocesses and therefore a key sequence for the step from quality by analysis to quality by design. The potential of biocalorimetry as a reliable biomass monitoring tool and as a key part of a robust control strategy for aerobic fed-batch cultures of Crabtree-negative yeast cells in defined growth medium was investigated. Presenting controller errors of less than 4% in the best cases, the approach paves the way for the development of a generally applicable process analytical technology platform for monitoring and control of microbial fed-batch cultures.     

Effects of fermentation feeding strategies prior to induction of expression of a recombinant malaria antigen inEscherichia coli

Summary A variety of feeding strategies have been described for attaining high cell densities in fed-batch fermentors. Although cell density is an important component in the produtivity of recombinant fermentations, it must be achievable with high product expression levels. Experiments were conducted to study the influence of fermentation feeding strategies on the production of a recombinant malaria antigen inEscherichia coli. C-source feeding profiles were calculated to maintain specific growth rates at 0.1, 0.2, 0.35, and 0.5 l/h prior to induction in defined and complex media using an exponential growth model. Fed-batch fermentations employing these feeding profiles effectively controlled the specific growth rates prior to induction. Antigen yields per dry cell weight did not vary with specific growth rate. Antigen yields from fed-batch fermentations achieving high cell densities were similar to batch fermentations achieving low cell densities. These results show that C-feeding policies can limit growth without reducing expression levels in some systems, and suggest applications in managing oxygen demand and catabolic by-product formation during process scale-up.     

Fed-batch culture optimization of a growth-associated hybridoma cell line in chemically defined protein-free media

An investigation was made to study the processes of fed-batch cultures of a hybridoma cell line in chemically defined protein-free media. First of all, a strong growth-associated pattern was correlated between the production of MAb and growth of cells through the kinetic studies of batch cultures, suggesting the potential effectiveness of extending the duration of exponential growth in the improvement of MAb titers. Second, compositions of amino acids in the feeding solution were balanced stepwisely according to their stoichiometrical correlations with glucose uptake in batch and fed-batch cultures. Moreover, a limiting factor screening revealed the constitutive nature of Ca²⁺ and Mg²⁺ for cell growth, and the importance of their feeding in fed-batch cultures. Finally, a fed-batch process was executed with a glucose uptake coupled feeding of balanced amino acids together with groups of nutrients and a feeding of CaCl₂ and MgCl₂ concentrate. The duration of exponential cell growth was extended from 70 h in batch culture and 98 h in fed-batch culture without Ca²⁺/Mg²⁺ feeding to 117 h with Ca²⁺/Mg²⁺ feeding. As a result of the prolonged exponential cell growth, the viable and total cell densities reached 7.04 × 10⁶ and 9.12 × 10⁶ cells ml⁻¹, respectively. The maximal MAb concentration achieved was increased to approximately eight times of that in serum supplemented batch culture.