Effect of salts on pasting, thermal, and rheological properties of rice starch in the presence of non-ionic and ionic hydrocolloids

Effects of salts on pasting, thermal, and rheological properties of rice starch (RS) in the presence of non-ionic (guar gum; GG) or ionic (xanthan; XT) hydrocolloid were studied. Rapid visco-analysis (RVA) showed that addition of salts significantly increased peak, breakdown, and final viscosities, and pasting temperatures of RS/XT blends, whereas those of RS/GG blends were varied depending on the type of salts added. Differential scanning calorimetry (DSC) demonstrated that salt addition significantly increased gelatinization temperatures of either RS/GG or RS/XT blend, whereas gelatinization enthalpy was less affected. Dynamic viscoelastic tests revealed that addition of salts had a more pronounced effect on enhancing structure formation of RS/XT gels than that of RS/GG gels. The steady shear viscosity was generally in line with the values of final viscosity obtained during pasting. These results would be used as a guideline for developing starch-based food products containing salts.     

Expression of a fungal glucoamylase in transgenic rice seeds

Glucoamylase, which catalyses the hydrolysis of the α-1,4 glycosidic bonds of starch, is an important industrial enzyme used in starch enzymatic saccharification. In this study, a glucoamylase gene from Aspergillus awamori, under the control of the promoter of seed storage protein Gt1, was introduced into rice by Agrobacterium-mediated transformation. Significant glucoamylase activity was detected specifically in the seeds but not other tissues of the transgenic rice lines. The highest enzymatic activity was found in the transgenic line Bg17-2, which was estimated to have about 500 units per gram of seeds (one unit is defined as the amount of enzyme that produces 1 μmol of reducing sugar in 1 min at 60 °C using soluble starch as substrate). The optimum pH for the activity of the rice produced enzyme is 5.0–5.5, and the optimum temperature is around 60 °C. One part of this transgenic glucoamylase rice seed flour fully converted 25 parts of corn starch pre-liquefied by an α-amylase also produced by a transgenic rice into glucose in 16 h incubation. This study suggests that this hydrolysis enzyme may substitute commercial fermentation enzymes for industrial starch conversion.     

Effect of Concentration and Temperature on Flow Properties of Alyssum homolocarpum Seed Gum Solutions: Assessment of Time Dependency and Thixotropy

Effects of different shear rates (14, 25, and 50 s⁻¹), gum concentrations (3%, 3.5%, and 4%), and temperatures (5–65 °C) on flow properties of Alyssum homolocarpum seed gum solutions were investigated using a rotational viscometer. The experimental data were fitted with three time-dependent rheological models, namely second-order structural kinetic model, Weltman model, and first-order stress decay model with a non-zero stress value. The rate constant and extent of viscosity strongly depended on the shear rate, gum concentration, and temperature. It was found that A. homolocarpum seed gum samples exhibited shear thinning and thixotropic behavior for all concentrations and temperatures. The amount of structural breakdown decreased with shear rate, but it did not have a general trend with concentration and temperature. The extent of thixotropy increased with increasing gum concentration and decreased with increasing temperature and shear rate. In this work, the decay rate constant generally increased with increasing shear rate; however, it did not have any trend with concentration and temperature.     

XCCNAU-92生产黄原胶的工业发酵培养基成份

ＸＣＣＮＡＵ－９２生产黄原胶的工业发酵培养基成份是：蔗糖、玉米淀粉、氮源Ｘ、鱼粉、ＣａＣＯ３、ＭｇＳＯ４、Ｋ２ＨＰＯ４。适宜的Ｃ／Ｎ是：蔗糖（玉米淀粉）／氮源Ｘ＝６０．０／１．０,蔗糖（玉米淀粉）／鱼粉＝６０．０／１０．０。ＣａＣＯ３、ＭｇＳＯ４对ＸＣＣＮＡＵ－９２合成黄原胶有明显促进作用,Ｋ２ＨＰＯ４在发酵过程中使ｐＨ保持稳定,Ｍｎ２＋、Ｚｎ２＋、Ｆｅ３＋、柠檬酸和谷氨酸对生产黄原胶无促进作用。     

Sources and methods of manufacturing xanthan by fermentation of various carbon sources

Xanthan gum, an anionic polysaccharide with an exceptionally high molecular weight, is produced by the bacterium Xanthomonas sp. It is a versatile compound that has been utilized in various industries for decades. Xanthan gum was the second exopolysaccharide to be commercially produced, following dextran. In 1969, the US Food and Drug Administration (FDA) approved xanthan gum for use in the food and pharmaceutical industries. The food industry values xanthan gum for its exceptional rheological properties, which make it a popular thickening agent in many products. Meanwhile, the cosmetics industry capitalizes on xanthan gum's ability to form stable emulsions. The industrial production process of xanthan gum involves fermenting Xanthomonas in a medium that contains glucose, sucrose, starch, etc. as a substrate and other necessary nutrients to facilitate growth. This is achieved through batch fermentation under optimal conditions. However, the increasing costs of glucose in recent years have made the production of xanthan economically unviable. Therefore, many researchers have investigated alternative, cost-effective substrates for xanthan production, using various modified and unmodified raw materials. The objective of this analysis is to investigate how utilizing different raw materials can improve the cost-efficient production of xanthan gum.     

Influence of Guar Gum on the In Vitro Starch Digestibility—Rheological and Microstructural Characteristics

The present study investigates the effect of guar gum on the digestibility of a waxy maize starch in vitro under simulated gastric and intestinal conditions. A detailed rheology and confocal scanning laser microscopy of the digesta were performed in order to study the possible mechanisms of interactions involved during in vitro hydrolysis of starch. No starch hydrolysis was observed under simulated gastric conditions, whereas more than 90% hydrolysis was observed at the end of digestion under simulated intestinal conditions. In the presence of guar gum, the starch hydrolysis was reduced by nearly 25% during the first 10 min and by 15% at the end of in vitro intestinal digestion. The rheological behavior of the digesta was significantly affected in the presence of the gum. The viscosity of digesta decreased during intestinal digestion; however, the extent of decrease was quite low in the presence of guar gum. The consistency index increased and flow behavior index of digesta decreased in the presence of gum after 1 min of intestinal digestion. All the samples (digested or undigested) displayed a pseudoplastic behavior as their apparent viscosity (η _a) decreased with an increase in shear rate. A negative correlation between the starch hydrolysis (%) and storage modulus for the starch sample without gum and a positive correlation for the starch sample with gum were found. Large granule remnants observed through confocal micrographs have shown that the solubilization of starch granule remnants during in vitro digestion is significantly reduced in the presence of gum.     

Some chemical and physical properties of extracellular polysaccharides produced by Butyrivibrio fibrisolvens strains

Most strains of Butyrivibrio fibrisolvens are known to produce extracellular polysaccharides (EPs). However, the rheological and functional properties of these EPs have not been determined. Initially, 26 strains of Butyrivibrio were screened for EP yield and apparent viscosities of cell-free supernatants. Yields ranged from less than 1.0 to 16.3 mg per 100 mg of glucose added to the culture. Viscosities ranged from 0.71 to 5.44 mPa.s. Five strains (CF2d, CF3, CF3a, CE51, and H10b) were chosen for further screening. The apparent viscosity of the EP from each of these strains decreased by only 50 to 60% when the shear rate was increased from 20 to 1,000 s-1. Strain CE51 produced the EP having the highest solution viscosity. A detailed comparison of shear dependency of the EP from strain CF3 with xanthan gum showed that this EP was less shear sensitive than xanthan gum and, at a shear rate of 1,000 s-1, more viscous. EPs from strains CF3 and H10b were soluble over a wide range of pH (1 to 13) in 80% (vol/vol) ethanol-water or in 1% (wt/vol) salt solutions. The pH of 1% EP solutions was between 4.5 and 5.5. Addition of acid increased solution viscosities, whereas addition of base decreased viscosity. EPs from strains CF3, CE51, and H10b displayed qualitatively similar infrared spectra. Calcium and sodium were the most abundant minerals in the three EPs. The amounts of magnesium, calcium, and iron varied considerably among the EPs, but the potassium contents remained relatively constant.     

Some chemical and physical properties of extracellular polysaccharides produced by Butyrivibrio fibrisolvens strains.

Most strains of Butyrivibrio fibrisolvens are known to produce extracellular polysaccharides (EPs). However, the rheological and functional properties of these EPs have not been determined. Initially, 26 strains of Butyrivibrio were screened for EP yield and apparent viscosities of cell-free supernatants. Yields ranged from less than 1.0 to 16.3 mg per 100 mg of glucose added to the culture. Viscosities ranged from 0.71 to 5.44 mPa.s. Five strains (CF2d, CF3, CF3a, CE51, and H10b) were chosen for further screening. The apparent viscosity of the EP from each of these strains decreased by only 50 to 60% when the shear rate was increased from 20 to 1,000 s-1. Strain CE51 produced the EP having the highest solution viscosity. A detailed comparison of shear dependency of the EP from strain CF3 with xanthan gum showed that this EP was less shear sensitive than xanthan gum and, at a shear rate of 1,000 s-1, more viscous. EPs from strains CF3 and H10b were soluble over a wide range of pH (1 to 13) in 80% (vol/vol) ethanol-water or in 1% (wt/vol) salt solutions. The pH of 1% EP solutions was between 4.5 and 5.5. Addition of acid increased solution viscosities, whereas addition of base decreased viscosity. EPs from strains CF3, CE51, and H10b displayed qualitatively similar infrared spectra. Calcium and sodium were the most abundant minerals in the three EPs. The amounts of magnesium, calcium, and iron varied considerably among the EPs, but the potassium contents remained relatively constant.     

Genetic Construction of Lactose-Utilizing Xanthomonas campestris

Xanthomonas campestris, the producer of xanthan gum, possesses a β-galactosidase of very low specific activity. Plasmid pGC9114 (RP1::Tn951), generated by the transposition of the lactose transposon Tn951 to RP1, was conjugally transferred into XN1, a nalidixic acid-resistant derivative of X. campestris NRRL B-1459S-4L. Transfer occurred on membrane filters and in broth. The β-galactosidase gene of Tn951 was expressed in X. campestris. The specific activity of β-galactosidase in transconjugants was over 200-fold higher than that in XN1, and transconjugants grew as well in lactose-based media as in glucose-based media. The lactose-utilizing transconjugants could potentially be used to produce xanthan gum from cheese whey.     

Rheological properties of guar gum and hydroxyethyl guar gum in aqueous solution

The rheological properties of aqueous solutions of guar gum (GG) and hydroxyethyl guar gum (HEG) have been investigated. The flow properties of these polysaccharide solutions were studied at the shear rate in the range 1.5–1310s⁻¹ using a Rheotest-2 viscometer. The flow of these polysaccharide solutions was described by equation of state based on Cross model. The basic rheological parameters, like zero shear rate viscosity (η_o), elasticity modulus (G_o) and relaxation time (gl_o) were calculated using simple and established relations. Master viscosity curves indicated that the molecular weight distribution of native guar gum has been changed by hydroxyethylation under specified reaction conditions. The effect of concentration and temperature on η_o and λ_o has been studied, and the relations among these were established by simple equations.     

Yield stress components of waxy corn starch–xanthan mixtures: Effect of xanthan concentration and different starches

Yield stress of 6% (w/w) waxy maize (WXM), cross-linked waxy maize (CLWM), and cold water swelling (CWS) starches in xanthan gum dispersions: 0%, 0.35%, 0.50%, 0.70%, and 1.0% was measured with the vane method at an apparent shear rate of 0.05 s⁻¹. The intrinsic viscosity of the xanthan gum was determined to be: 112.3 dL/g in distilled water at 25 °C. Values of the static (σ_0s) and dynamic (σ_0d) yield stress of each dispersion were measured before and after breaking down its structure under continuous shear, respectively. The WXM and CWS starches exhibited synergistic behavior, whereas the CLWM starch showed antagonistic effect with xanthan gum. The difference (σ_0s − σ_0d) was the stress required to break the inter-particle bonding (σ_b). The contributions of the viscous (σ_v) and network (σ_n) components were estimated from an energy balance model. In general, values of σ_b of the starch–xanthan gum dispersions decreased and those of σ_n increased with increase in xanthan gum concentration.     

Synthesis and Fungicidal Activity of Diaryl 1,1 -Dichloroethyl-phosphonates

Non-Newtonian behavior and dynamic viscoelasticity of a series of aqueous mixed solutions of xanthan and locust bean gum were measured using a rheogoniometer, and the rheological properties were analysed. A gelation occurred in the mixture at the concentration of 0.2% total gums at room temperature. The flow curves of the mixture solutions showed a yield value and approximated to plastic behavior at 50°C. The maximum dynamic modulus was obtained when the mixing ratio of xanthan to locust bean gum was 1:2, while comparable high moduli were also obtained in the mixing ratio of 1: 3 or 1:4. A mixture of deacetylated xanthan and locust bean gum showed the highest dynamic modulus, about two times that of the mixture of native or Na-form xanthan. The dynamic modulus of the mixtures decreased rapidly with increasing temperature. In contrast, the dynamic viscosity was scarcely changed during increasing temperature in the mixing ratio of 2: 1. The dynamic modulus was decreased by addition of urea (4.0 M), NaCl (0.1%) and MgCl₂. We concluded that the intermolecular interaction between xanthan and locust bean gum might occur between the side chains of the former and backbone of the latter, as in a lock-and-key effect.     

Rheology of hydroxyethyl guar gum derivatives

The rheological properties of aqueous solutions of hydroxyethyl guar gum, a synthetic derivative of guar gum, have been studied under continuous and oscillatory shear flow conditions. Data obtained from both experimental techniques were satisfactorily fitted according to Cross-type models. The effect of polymer concentration, molecular weight and temperature on the rheological behavior of hydroxyethyl guar gum systems have been investigated and discussed in terms of rheological parameters like the zero-shear viscosity η₀ and the characteristic times λ and λ′.     

Structural elucidation, modification and characterization of seed gum from Cassia javahikai seeds: A non-traditional source of industrial gums

A water-soluble seed gum was isolated from seed endosperm of Cassia javahikai. The acid-catalyzed fragmentation, methylation, selective enzymatic degradation and periodate oxidation suggested a heteropolymeric structure for the polysaccharide. The polysaccharide was shown to have a linear chain of β(1 → 4) linked d-mannopyranosyls units with side chains of α(1 → 6) d-galactopyranosyl units. Grafting of polyacrylamide onto the gum was performed using K₂S₂O₈/ascorbic acid redox system in presence of Ag⁺ as catalyst at 35 ± 2 °C. The viscosity of the gum solution increased on grafting and the grafted gum was observed to resist biodegradation for more than 256 h. Thermogravimetric analysis revealed that grafted gum was more thermally stable than native gum.     

Preparation and characterization of polyacrylic acid/karaya gum and polyacrylic acid/tamarind seed gum adducts and utilization in textile printing

Polymerization of 20% neutralized acrylic acid (Na form), AA, in presence of Karaya gum, KG, or tamarind seed gum, TG, at AA/gum weight ratio of 1/1 and 2/1 results in PAA/KG1, PAA/KG2, PAA/TG1 and PAA/TG2 adducts, respectively (where the suffix 1 or 2 stands for AA/gum ratios of 1/1 or 2/1). Infra red spectra of adducts are examined. Aqueous pastes of adducts, native gums and GG are of non-Newtonian thixotropic flow within a shear rate range of 4–40 s⁻¹. Adduct pastes (7.5% w/v) are of higher apparent viscosities (η) than their native gums or GG, and pastes of TG adducts are of higher η than KG adducts. Except for PAA/TG2 adduct, the power law does not correlate well to the other pastes. Preliminary trials showed that adducts are excellent thickeners for reactive and acid printing on wool, silk and nylon 6. Prints by adducts are of higher color strength than those by native gums or GG. GG paste was completely destroyed after storing for 7 days, whereas η of pastes of adducts and native gums were noticeably decreased upon storing.     

A rheological study of the order-disorder conformational transition of xanthan gum

The rheological properties of a moderately concentrated solution of xanthan gum in both the ordered and the disordered state have been studied. Oscillatory shear, steady shear flow, and extensional flow experiments have been performed at different temperatures, covering the order-disorder transition determined by differential scanning calorimetry (DSC). The principle of time/temperature superposition was applied to the xanthan solutions for the different types of flow. Although a master curve covering six decades of frequency could be obtained for the storage modulus over the entire investigated temperature range, less agreement was found for the other modulus. This indicates that the order-disorder transition reflects changes on the molecular scale and slight modification of the physical network structure. To the authors' knowledge, this is the first time that this transition has been observed using these different rheological techniques.     

Development of a rheological analogue to periprosthetic fluid

The purpose of this work is to design a rheological analogue to periprosthetic fluid, for potential use in wear testing of orthopaedic implants. Polymer solutions of sodium carboxymethyl cellulose (CMC), xanthan and mixtures thereof were prepared, and the experimentally determined viscosity-shear rate dependence was analyzed using the three-parameter modified Cross model. A mixture containing 0.185 wt% CMC and 0.075 wt% xanthan was identified as being the closest rheological match for periprosthetic fluid in both steady shear and oscillatory modes of deformation.     

pH-Dependent interaction between sodium caseinate and xanthan gum

Xanthan gum and sodium caseinate are used to improve stability and texture of food. To investigate interactions between them, the effects of pH on structure of sodium caseinate–xanthan gum complex were analyzed. HCl titration showed that the absorbance of the mixture was different from that of sodium caseinate alone throughout the acidification, and that syneresis in the mixture was delayed in acidic pH. Rennet digestion clarified that xanthan gum retarded degradation of κ-casein at pH 2.7. Atomic force microscopy revealed that xanthan gum interaction with sodium caseinate was pH-dependent. Sodium caseinate particles were individually bound with xanthan gum at pH 6.6, and a side-by-side aggregation of sodium caseinate along xanthan gum was observed at pH 4.2. The mixture formed a network composed of rod-like fibers at pH 2.7. These results indicate that hydrophobic and electrostatic interactions play a role in the complex formation at neutral and acidic pH, respectively.     

Physical and Textural Properties of Mayonnaise Prepared Using Virgin Coconut Oil/Fish Oil Blend

Physical and textural properties of mayonnaise prepared using virgin coconut oil (VCO)/fish oil (FO) blends at different ratios were examined in comparison with that prepared using soybean oil (SO) as affected by storage time (30 days). At day 0, sample prepared with SO showed the highest L*, a*, and b* values among all the samples, whereas the lowest values were noticeable for VCO containing sample. At day 30 of storage, decreases in L*, and b* values of all mayonnaise samples were observed (p < 0.05). However, a* values were increased at day 30 of storage (p < 0.05). For texture analysis, highest firmness, consistency and cohesiveness were obtained for the sample containing SO. Increasing levels of FO in VCO/FO samples increased the firmness, consistency and cohesiveness. For all the samples, loss modulus (G″) values were lower than G′. After 30 days of storage, all samples demonstrated slight decreases in G′ and viscosity than freshly prepared mayonnaise (day 0). When the sample containing VCO/FO (90:10) blend was further characterized, slight difference was observed in microscopic structure and droplet size distribution before and after storage of 30 days. Increase in droplet size was noticeable because of coalescence after the storage. Overall, type of oil used for preparation of mayonnaise as well as storage time affected the physical properties including textural and rheological properties of mayonnaise.

     

Impact of incorporations of various polysaccharides on rheological and microstructural characteristics of heat-induced quinoa protein isolate gels

This study aimed to investigate the properties of heat-induced gels (85 °C for 30 min) of quinoa protein isolate (QPI) in the presence and absence of various polysaccharides including guar gum (GG), locust bean gum (LBG), and xanthan gum (XG) at pH 7. For this purpose, samples with three gum concentrations (0.05, 0.1, and 0.2 wt%) at a fixed QPI concentration (10 wt%) and a fixed ionic strength (50 mM NaCl) were studied in terms of their gelation behaviour, small and large deformation rheological properties, water holding capabilities, and microstructural characteristics. Rheological measurements revealed that all polysaccharides incorporation could improve gel strength (complex modulus, G*) and breaking stress, accelerate gel formations, and more stiffer gels were obtained at greater polysaccharide concentrations. The XG exhibited the most gel strengthening effect followed by LBG and GG. Incorporation of 0.2 wt% XG led to a 15 folds increase in G* compared to the control. Confocal laser scanning microscopy observation revealed that the polysaccharides also altered gel microstructures, with the gels containing XG showing the most compact gel structures. The findings of this study may provide useful information for the fabrication of novel QPI based food gel products with improved texture.