共查询到20条相似文献,搜索用时 31 毫秒
1.
The stabilities of bilirubin (BR) glucuronide, monoglucuronide (BMG), and diglucuronide (BDG) were studied under various conditions by HPLC. In aqueous media, BMG showed a pronounced lability and was easily transformed into equimolar BDG and BR. It was proved by direct analysis of tetrapyrrole isomers that BDG and BR were formed from dipyrrole exchange of BMG molecules. All reducing agents examined (sodium ascorbate, cysteine, GSH, dithiothreitol, NADH, and NADPH) suppressed the transformation of BMG into BDG and BR. Bovine serum albumin and rat liver cytosol fractions also stabilized BMG strongly. BDG was fairly stable in aqueous media as compared with BMG. When BMG was incubated both with and without liver plasma membranes (N2 fraction) from Wistar rats, the formation rates of BDG and BR in both incubation mixtures were exactly the same. The composition of BDG and BR isomers was the same in both mixtures. Also, heat denaturation of the plasma membranes did not affect formation rates. Moreover, the reaction was completely inhibited by sodium ascorbate. These findings indicate that rat liver plasma membranes have no enzyme activity for BDG formation from BMG. 相似文献
2.
Correlation between a novel calpastatin biosensor and traditional calpastatin assay techniques 总被引:1,自引:0,他引:1
An optical fiber biosensor to detect calpastatin has been investigated as a preliminary step in developing tenderness detection instrumentation. Longissimus dorsi samples were taken from beef carcasses (n=21) at 0, 24, 36 and 48h postmortem. Muscle homogenates were assayed for calpastatin activity using traditional methods and an optical fiber biosensor. Warner-Bratzler shear force was also performed on a steak from each carcass at 14d postmortem. Results demonstrated that the measurements with highest correlation between traditional calpastatin assays and optical biosensor readings were taken at 48h postmortem (r=0.597, P< or =0.01), suggesting that this is the best time for use of this biosensor in an on-line grading system. This research further advances the development of a calpastatin biosensor and would be useful in laboratory determination of the presence of biologically active calpastatin concentrations. 相似文献
3.
The main goal of the research was the development of thermal immune biosensor for highly sensitive and specific determination of nonylphenol (NPh), based on measuring the heat released as a result of the interaction between hapten and specific antibodies. As it was shown previously, in case of SPR based immune biosensor a number of algorithms of analysis was realized, including "competitive" (with the sensitivity on the level of about 7-10 ng/ml), "direct" (10 ng/ml) ways, and the so called algorithm "to saturation" (about 2-5 ng/ml). The time of analysis by immune SPR biosensor is about 10 min (on the previously prepared transducer surface, including immobilization of sensitive structures). The developed thermal biosensor provides direct detection of NPh with the sensitivity of about 1 microg/ml and the overall time of analysis of about 20-30 min. In spite of a lower sensitivity of the thermal biosensor, it is less sensitive to admixtures in real samples and simpler in use than the biosensor based on SPR and, consequently, the thermal biosensor is more applicable in the field conditions. 相似文献
4.
An ultrasensitive and stable potentiometric immunosensor 总被引:3,自引:0,他引:3
We describe a novel quantitative polypyrrole based potentiometric biosensor that provides broad-spectrum assay capability. The biosensor allows for capture of analytes of interest from complex real samples such as serum and whole blood, and subsequent measurement in a controlled matrix environment. The technology is rapid (<15 min), ultrasensitive (<50 fM) and reproducible (CV<5% at 0.1 ng/ml). In addition the system has shown a wide dynamic range (four to five orders of magnitude), and good stability, 37 degrees C for at least 4 months. This potentiometric biosensor detects enzyme labelled immuno-complexes formed at the surface of a polypyrrole coated, screenprinted gold electrode. Detection is mediated by a secondary reaction that produces charged products (a 'charge-step' procedure). A shift in potential is measured at the sensor surface, caused by local changes in redox state, pH and/or ionic strength. The magnitude of the difference in potential is related to the concentration of the formed receptor-target complex. The potentiometric sensing technology has been demonstrated in assays for hepatitis B surface antigen (HBsAg) (Mw>300 kDa), Troponin I (Mw approximately 23 kDa), Digoxin (Mw 780 Da) and tumour necrosis factor (hTNF-alpha) (Mw approximately 23 kDa). These model targets were chosen to represent analytes of a range of molecular weights, and because of their requirement for assays of high analytical sensitivity and precision. All these assays were performed using complex fluid samples and the presence of any non-specific binding has no significant effect on the final measurement. New assays can be transferred and optimised readily. 相似文献
5.
A rapid biosensor assay procedure that utilizes biotin streptavidin mediated filtration capture onto nitrocellulose membrane, in conjunction with a silicon-based light-addressable potentiometric sensor (LAPS) was developed for detection and identification of biological and chemical threat agents. Sandwich immunoassays, nucleic acid hybridization assays and enzyme inhibition assays are described. For immunoassays, the lower limits of detection (LOD) per 100-microl sample were approximately 5 pg/ml for protein (Staphylococcal enterotoxin B), 2 ng/ml for virus (Newcastle disease virus), and 20 ng/ml for vegetative bacteria (Brucella melitensis). In a dual gene probe assay format, the LOD was 0.30 fmol (1.8 x 10(8) copies per 60-microl) of single stranded target DNA. Enzyme inhibition assays on the LAPS using acetylcholinesterase were able to detect soman and sarin in aqueous samples at 2 and 8 pg (100 and 600 pM), respectively. The assays were easy to perform and required a total time equal to the reaction period plus about 15 min for filtering, washing and sensing. The assay format is suitable for detection of a wide range of infectious and toxic substances. New assays can be developed and optimized readily, often within 1 or 2 days. 相似文献
6.
An array-based optical biosensor for the simultaneous analysis of multiple samples in the presence of unrelated multi-analytes was fabricated. Urease and acetylcholinesterase (AChE) were used as model enzymes and were co-entrapped with the sensing probe, FITC-dextran, in the sol-gel matrix to measure pH, urea, acetylcholine (ACh) and heavy metals (enzyme inhibitors). Environmental and biological samples spiked with metal ions were also used to evaluate the application of the array biosensor to real samples. The biosensor exhibited high specificity in identifying multiple analytes. No obvious cross-interference was observed when a 50-spot array biosensor was used for simultaneous analysis of multiple samples in the presence of multiple analytes. The sensing system can determine pH over a dynamic range from 4 to 8.5. The limits of detection (LODs) of 2.5-50 microM with a dynamic range of 2-3 orders of magnitude for urea and ACh measurements were obtained. Moreover, the urease-encapsulated array biosensor was used to detect heavy metals. The analytical ranges of Cd(II), Cu(II), and Hg(II) were between 10 nM and 100 mM. When real samples were spiked with heavy metals, the array biosensor also exhibited potential effectiveness in screening enzyme inhibitors. 相似文献
7.
Detection of viral bioagents using a shear horizontal surface acoustic wave biosensor 总被引:1,自引:0,他引:1
Bisoffi M Hjelle B Brown DC Branch DW Edwards TL Brozik SM Bondu-Hawkins VS Larson RS 《Biosensors & bioelectronics》2008,23(9):1397-1403
Viruses are of high medical and biodefense concern and their detection at concentrations well below the threshold necessary to cause health hazards continues to be a challenge with respect to sensitivity, specificity, and selectivity. Ideally, assays for accurate and real time detection of viral agents would not necessitate any pre-processing of the analyte, which would make them applicable for example to bodily fluids (blood, sputum) and man-made as well as naturally occurring bodies of water (pools, rivers). We describe herein a robust biosensor that combines the sensitivity of surface acoustic waves (SAW) generated at a frequency of 325MHz with the specificity provided by antibodies for the detection of viral agents. A lithium tantalate-based SAW transducer with silicon dioxide waveguide sensor platform featuring three test and one reference delay lines was used to adsorb antibodies directed against either Coxsackie virus B4 or the category A bioagent Sin Nombre virus (SNV), a member of the genus Hantavirus, family Bunyaviridae, negative-stranded RNA viruses. Rapid detection (within seconds) of increasing concentrations of viral particles was linear over a range of order of magnitude for both viruses, although the sensor was approximately 5 x 10(5)-fold more sensitive for the detection of SNV. For both pathogens, the sensor's selectivity for its target was not compromised by the presence of confounding Herpes Simplex virus type 1. The biosensor was able to detect SNV at doses lower than the load of virus typically found in a human patient suffering from hantavirus cardiopulmonary syndrome (HCPS). Further, in a proof-of-principle real world application, the SAW biosensor was capable to selectively detect SNV agents in complex solutions, such as naturally occurring bodies of water (river, sewage effluent) without analyte pre-processing. This is the first study that reports on the detection of viral agents using an antibody-based SAW biosensor that has the potential to be used as a hand-held and self-contained device for rapid viral detection in the field. 相似文献
8.
Zinchenko OA Marchenko SV Sergeyeva TA Kukla AL Pavlyuchenko AS Krasyuk EK Soldatkin AP El'skaya AV 《Biosensors & bioelectronics》2012,35(1):466-469
The highly sensitive and selective potentiometric biosensor for creatinine determination has been developed by us earlier. In it, pH-sensitive field effect transistors were used as transducer and immobilized creatinine deiminase (EC 3.5.4.21)--as a biosensitive element. In the work presented, we optimized this biosensor for creatinine analysis in real samples of dialysate in patients with renal failure. The optimized version of biosensor was applied for on-line monitoring of the level of creatinine in the patient's dialysate fluid in the course of dialysis session. High correlation between the biosensor analysis and traditional Jaffe method was demonstrated. 相似文献
9.
Scheler O Kindt JT Qavi AJ Kaplinski L Glynn B Barry T Kurg A Bailey RC 《Biosensors & bioelectronics》2012,32(1):56-61
This work describes the development of an automated flow-based biosensor that employs genetically modified acetylcholinesterase (AChE) enzymes B394, B4 and wild type B131. The biosensor was based on a screen printed carbon electrode (SPE) that was integrated into a flow cell. Enzymes were immobilised on cobalt (II) phthalocyanine (CoPC) modified electrodes by entrapment in a photocrosslinkable polymer (PVA-AWP). The automated flow-based biosensor was successfully used to quantify three organophosphate pesticides (OPs) in milk samples. The OPs used were chlorpyriphos-oxon (CPO), ethyl paraoxon (EPOx) and malaoxon (MOx). The total analysis time for the assay was less than 15 min. Initially, the biosensor performance was tested in phosphate buffer solution (PBS) using B394, B131 and B4 biosensors. The best detection limits were obtained with B394; therefore, this biosensor was used to produce calibration data in milk with three OPs in the concentration range of 5 × 10(-6)M to 5 × 10(-12)M. The limit of detection (LOD) obtained in milk for CPO, EPOx and MOx were 5 × 10(-12)M, 5 × 10(-9)M and 5 × 10(-10)M, respectively, with a correlation coefficient R(2)=0.9910. The automated flow-based biosensor successfully quantified the OPs in different fat-containing milk samples. There were no false positives or false negatives observed for the analytical figures of merit for the constructed biosensors. This method is inexpensive, sensitive, portable, non-invasive and provides real-time results. This analytical system can provide rapid detection of highly toxic OPs in food matrices such as milk. 相似文献
10.
An impedance biosensor based on interdigitated array microelectrode (IDAM) coupled with magnetic nanoparticle-antibody conjugates (MNAC) was developed and evaluated for rapid and specific detection of E. coli O157:H7 in ground beef samples. MNAC were prepared by immobilizing biotin-labeled polyclonal goat anti-E. coli antibodies onto streptavidin-coated magnetic nanoparticles, which were used to separate and concentrate E. coli O157:H7 from ground beef samples. Magnitude of impedance and phase angle were measured in a frequency range of 10 Hz to 1 MHz in the presence of 0.1M mannitol solution. The lowest detection limits of this biosensor for detection of E. coli O157:H7 in pure culture and ground beef samples were 7.4 x 10(4) and 8.0 x 10(5)CFU ml(-1), respectively. The regression equation for the normalized impedance change (NIC) versus E. coli O157:H7 concentration (N) in ground beef samples was NIC=15.55 N-71.04 with R(2)=0.95. Sensitivity of the impedance biosensor was improved by 35% by concentrating bacterial cells attached to MNAC in the active layer of IDAM above the surface of electrodes with the help of a magnetic field. Based on equivalent circuit analysis, it was observed that bulk resistance and double layer capacitance were responsible for the impedance change caused by the presence of E. coli O157:H7 on the surface of IDAM. Surface immobilization techniques, redox probes, or sample incubation were not used in this impedance biosensor. The total detection time from sampling to measurement was 35 min. 相似文献
11.
Neha Bhardwaj Sanjeev K. Bhardwaj Jyotsana Mehta Girish C. Mohanta Akash Deep 《Analytical biochemistry》2016
Bacteriophages are a class of viruses that specifically infect and replicate within a bacterium. They possess inherent affinity and specificity to the particular bacterial cells. This property of bacteriophages makes them an attractive biorecognition element in the field of biosensor development. In this work, we report the use of an immobilized bacteriophage for the development of a highly sensitive electrochemical sensor for Staphylococcus arlettae, bacteria from the pathogenic family of coagulase-negative staphylococci (CNS). The specific bacteriophages were covalently immobilized on the screen-printed graphene electrodes. Thus, the fabricated bacteriophage biosensor displayed quantitative response for the target bacteria (S. arlettae) for a broad detection range (2.0–2.0 × 106 cfu). A fast response time (2 min), low limit of detection (2 cfu), specificity, and stability over a prolonged period (3 months) are some of the important highlights of the proposed sensor. The practical utility of the developed sensor has been demonstrated by the analysis of S. arlettae in spiked water and apple juice samples. 相似文献
12.
A capillary-based optical biosensor has been developed to detect calpastatin, an indicator of meat tenderness. Longissimus muscle samples (n = 11) were extracted from beef carcasses at 0 and 48 h post-mortem. These samples were assayed for calpastatin by traditional laboratory methods and with a newly developed capillary tube biosensor as well as for Warner–Bratzler shear force (WBSF) and crude protein and the responses were compared. Additionally, the response from the capillary-based biosensor was compared to a previously developed optical fiber biosensor. When the 0 and 48 h sampling periods were combined, the capillary tube biosensor was moderately accurate in predicting calpastatin activity (R2 = 0.6058). There was less variation in the 0 h capillary tube biosensor compared to the 0 h pre-column (P = 0.006) and post-column optical fiber biosensors (P = 0.047), therefore the capillary tube biosensor is a more precise system of measurement. This research further advances the development of a calpastatin biosensor and makes online assessment one step closer to reality. 相似文献
13.
Y Adachi J Roy-Chowdhury N Roy-Chowdhury R Kinne T Tran H Kobayashi I M Arias 《Journal of biochemistry》1990,107(5):749-754
In order to characterize the mechanism for bilirubin transport in the liver, the uptake of bilirubin diglucuronide (BDG) into purified sinusoidal plasma membrane vesicles was investigated. BDG uptake was saturable, and was inhibited by sulfobromophthalein and unconjugated bilirubin, but was not affected by sodium taurocholate. BDG uptake was sodium-independent and was stimulated by intravesicular bilirubin or BDG (trans-stimulation). BDG transport showed strong potential sensitivity; vesicle inside-negative membrane potential created by different anion gradients inhibited BDG uptake whereas vesicle inside-positive membrane potential generated by potassium gradients and valinomycin markedly stimulated BDG transport. These data suggest that BDG, sulfobromophthalein, and probably unconjugated bilirubin share a common transporter in liver cells which is sodium independent, membrane-potential-dependent and capable of exchange. The direction of transport in vivo may be governed by the intracellular concentration of BDG and of other yet unidentified organic anions sharing this transporter. 相似文献
14.
The hemoflavoenzyme cellobiose dehydrogenase (CDH, EC 1.1.99.18) from Phanerochaete chrysosporium has been used in an amperometric redox polymer-based biosensor. Used in conjugation with a FIA system this biosensor can replace colorimetric assays for measuring cellobiose liberated from cellulose in a series of cellulase-containing samples. The biosensor gave the same result as the Somogyi-Nelson method in a less time-consuming and laborious manner. The two methods showed about the same precision. 相似文献
15.
16.
Dzyadevich SV Korpan YI Arkhipova VN Alesina MYu Martelet C El'Skaya AV Soldatkin AP 《Biosensors & bioelectronics》1999,14(3):283-287
Glucose-sensitive enzyme field effect transistors (ENFETs) modified by an additional Nafion membrane have been developed and used for diluted blood samples analysis. The ENFET was used in the linear portion of the calibration curve up to 1.5 mM glucose in a model solution, which corresponds with up to 60 mM glucose in the undiluted samples (dilution 1:40). The high linearity of the Grans curve (factor of linearity is 1.03) obtained by the method of standard additions indicates the high precision of analysis. Glucose concentrations in different blood serum samples determined by ENFETs were compared with those measured by the commercial analyzer 'Eksan-G' and colorimetric method ('Diagluc' enzymatic kit), and good correlation between these methods was revealed. The high reproducibility and operational stability of the biosensor developed were demonstrated. 相似文献
17.
Haigh JR Lefkowitz LJ Capacio BR Doctor BP Gordon RK 《Chemico-biological interactions》2008,175(1-3):417-420
Red blood cell AChE (RBC-AChE) and plasma BChE can be used as sensitive biomarkers to detect exposure to OP nerve agents, pesticides, and cholinergic drugs. In a comparative study, RBC-AChE and serum BChE activities in whole blood was obtained from forty seven healthy male and female human volunteers, and then exposed separately ex vivo to three OP nerve agents (soman (GD), sarin (GB) and VX) to generate a wide range of inhibition of AChE and BChE activity (up to 90% of control). These samples were measured using four different ChE assays: (i) colorimetric microEllman (using DTNB at 412 nm), (ii) Test-mate ChE field kit (also based on the Ellman assay), (iii) Michel (delta pH), and (iv) the Walter Reed Army Institute of Research Whole Blood (WRAIR WB) cholinesterase assay. The WRAIR assay is a modified Ellman method using DTP at 324 nm (which minimizes hemoglobin interference and improves sensitivity), and determines AChE and BChE in a small whole blood sample simultaneously. Scatter plots of RBC-AChE activities were determined using the WRAIR ChE assay versus the micro-Ellman, Test-mateTM and Michel after exposure to varying concentrations of soman, sarin and VX. Regression analyses yielded mostly linear relationships with high correlations (r2 = 0.83-0.93) for RBC-AChE values in the WRAIR assay compared to the alternate methods. For the plasma BChE measurements, individual human values were significantly more variable (as expected), resulting in lower correlations using WRAIR ChE versus the alternate assays (r2 values 0.5 - 0.6). To circumvent the limitations of simple correlation analysis, Bland and Altman analysis for comparing two independent measurement techniques was performed. For example, a Bland and Altman plot of the ratio of the WRAIR whole blood AChE and Michel AChE (plotted on the y-axis) vs. the average of the two methods (x-axis) shows that the majority of the individual AChE values are within +/- 1.96 S.D. of the mean difference, indicating that the two methods may be used interchangeably with a high degree of confidence. The WRAIR ChE assay can be thus be used as a reliable inter-conversion assay when comparing results from laboratory-based (Michel) and field-based (Test-mateTM ChE kit), which use different methodology and report in different units of AChE activity. 相似文献
18.
Metan G Nedret Koc A Ağkuş C Kaynar LG Alp E Eser B 《Revista iberoamericana de micología》2012,29(3):169-171
BackgroundAlthough bacteraemia has been reported to be related to false positive results in the 1,3-beta-d-glucan (BDG) test, the evidence for this interaction is limited.AimsTo investigate the association between bacteraemia and the BDG test.MethodsRecords of the Infection Control Committee were reviewed to identify bacteraemia in patients who were hospitalized in the haematology ward and stem cell transplantation unit. Patients who had undergone the BDG test at least once within 5 days of a positive blood culture were included in the study. BDG levels in the sera were assayed using the Fungitell kit (Associates of Cape Cod, East Falmouth, MA) according to the manufacturer's specifications. The cutoff for BDG positivity was 80 pg/mL.ResultsEighty-three bacteraemic episodes were identified in 71 patients. BDG positivity was detected in 14 patients with bacteraemia, and only 1 patient with Escherichia coli bacteraemia had high BDG levels (over 80 pg/mL) despite having no evidence of invasive fungal infection (IFI).ConclusionsOur study suggests that the cross-reactivity of the BDG test with a concomitant or recent bacteraemia is a very rare condition. Patients with risk factors for IFI should be evaluated cautiously when a positive BDG test is reported. 相似文献
19.
A portable biosensor has been developed to meet the demands of field toxicity analysis. This biosensor consists of three parts, a freeze-dried biosensing strain within a vial, a small light-proof test chamber, and an optic-fiber connected between the sample chamber and a luminometer. Various genetically engineered bioluminescent bacteria were freeze-dried to measure different types of toxicity based upon their modes of action. GC2 (lac::luxCDABE), a constitutively bioluminescent strain, was used to monitor the general toxicity of samples through a decrease in its bioluminescence, while specific toxicity was detected through the use of strains such as DPD2540 (fabA::luxCDABE), TV1061 (grpE::luxCDABE), DPD2794 (recA::luxCDABE), and DPD2511 (katG::luxCDABE). These inducible strains show an increase in bioluminescence under specific stressful conditions, i.e. membrane-, protein-, DNA-, and oxidative-stress, respectively. The toxicity of a sample could be detected by measuring the bioluminescence 30 min after addition to the freeze-dried strains. In an attempt to enhance the sensitivity of the freeze-dried cells, glucose and Tween 80 were tested as additives. It was found that the addition of glucose had a negative effect on the viability of the freeze-dried cells, while samples having Tween 80 showed an increase in their viability. On the other hand, the addition of either Tween 80 or glucose decreased the final bioluminescent response of DPD2540 in response to 4-chlorophenol. Using these strains, many different chemicals were tested and characterized. This portable biosensor, with a very simple protocol, can be used for field sample analysis and the monitoring of various water systems on-site. 相似文献
20.
Amperometric tyrosinase biosensor based on Fe3O4 nanoparticles-chitosan nanocomposite 总被引:1,自引:0,他引:1
A novel tyrosinase biosensor based on Fe(3)O(4) nanoparticles-chitosan nanocomposite has been developed for the detection of phenolic compounds. The large surface area of Fe(3)O(4) nanoparticles and the porous morphology of chitosan led to a high loading of enzyme and the entrapped enzyme could retain its bioactivity. The tyrosinase-Fe(3)O(4) nanoparticle-chitosan bionanocomposite film was characterized with atomic force microscopy and AC impedance spectra. The prepared biosensor was used to determine phenolic compounds by amperometric detection of the biocatalytically liberated quinone at -0.2V vs. saturated calomel electrode (SCE). The different parameters, including working potential, pH of supporting electrolyte and temperature that governs the analytical performance of the biosensor have been studied in detail and optimized. The biosensor was applied to detect catechol with a linear range of 8.3 x 10(-8) to 7.0 x 10(-5)mol L(-1), and the detection limit of 2.5 x 10(-8)mol L(-1). The tyrosinase biosensor exhibits good repeatability and stability. Such new tyrosinase biosensor shows great promise for rapid, simple, and cost-effective analysis of phenolic contaminants in environmental samples. The proposed strategy can be extended for the development of other enzyme-based biosensors. 相似文献