Crystallographic structure of ChitA,a glycoside hydrolase family 19, plant class IV chitinase from Zea mays

Maize ChitA chitinase is composed of a small, hevein‐like domain attached to a carboxy‐terminal chitinase domain. During fungal ear rot, the hevein‐like domain is cleaved by secreted fungal proteases to produce truncated forms of ChitA. Here, we report a structural and biochemical characterization of truncated ChitA (ChitA ΔN), which lacks the hevein‐like domain. ChitA ΔN and a mutant form (ChitA ΔN‐EQ) were expressed and purified; enzyme assays showed that ChitA ΔN activity was comparable to the full‐length enzyme. Mutation of Glu62 to Gln (ChitA ΔN‐EQ) abolished chitinase activity without disrupting substrate binding, demonstrating that Glu62 is directly involved in catalysis. A crystal structure of ChitA ΔN‐EQ provided strong support for key roles for Glu62, Arg177, and Glu165 in hydrolysis, and for Ser103 and Tyr106 in substrate binding. These findings demonstrate that the hevein‐like domain is not needed for enzyme activity. Moreover, comparison of the crystal structure of this plant class IV chitinase with structures from larger class I and II enzymes suggest that class IV chitinases have evolved to accommodate shorter substrates.     

Crystal structures of a family 19 chitinase from Brassica juncea show flexibility of binding cleft loops

Brassica juncea chitinase is an endo-acting, pathogenesis-related protein that is classified into glycoside hydrolase family 19, with highest homology (50-60%) in its catalytic domain to class I plant chitinases. Here we report X-ray structures of the chitinase catalytic domain from wild-type (apo, as well as with chloride ions bound) and a Glu234Ala mutant enzyme, solved by molecular replacement and refined at 1.53, 1.8 and 1.7 A resolution, respectively. Confirming our earlier mutagenesis studies, the active-site residues are identified as Glu212 and Glu234. Glu212 is believed to be the catalytic acid in the reaction, whereas Glu234 is thought to have a dual role, both activating a water molecule in its attack on the anomeric carbon, and stabilizing the charged intermediate. The molecules in the various structures differ significantly in the conformation of a number of loops that border the active-site cleft. The differences suggest an opening and closing of the enzyme during the catalytic cycle. Chitin is expected to dock first near Glu212, which will protonate it. Conformational changes then bring Glu234 closer, allowing it to assist in the following steps. These observations provide important insights into catalysis in family 19 chitinases.     

Molecular screening of Streptomyces isolates for antifungal activity and family 19 chitinase enzymes

Thirty soil-isolates of Streptomyces were analyzed to determine their antagonism against plant-pathogenic fungi including Fusarium oxysporum, Pythium aristosporum, Colletotrichum gossypii, and Rhizoctonia solani. Seven isolates showed antifungal activity against one or more strain of the tested fungi. Based on the 16S rDNA sequence analysis, these isolates were identified as Streptomyces tendae (YH3), S. griseus (YH8), S. variabilis (YH21), S. endus (YH24), S. violaceusniger (YH27A), S. endus (YH27B), and S. griseus (YH27C). The identity percentages ranged from 98 to 100%. Although some isolates belonged to the same species, there were many differences in their cultural and morphological characteristics. Six isolates out of seven showed chitinase activity according to a chitinolytic activity test and on colloidal chitin agar plates. Based on the conserved regions among the family 19 chitinase genes of Streptomyces sp. two primers were used for detection of the chitinase (chiC) gene in the six isolates. A DNA fragment of 1.4 kb was observed only for the isolates YH8, YH27A, and YH27C. In conclusion, six Streptomyces strains with potential chitinolytic activity were identified from the local environment in Taif City, Saudi Arabia. Of these isolates, three belong to family 19 chitinases. To our knowledge, this is the first reported presence of a chiC gene in S. violaceusniger YH27A.     

The structure and enzymatic properties of a novel RNase II family enzyme from Deinococcus radiodurans

Exoribonucleases are vital in nearly all aspects of RNA metabolism, including RNA maturation, end-turnover, and degradation. RNase II and RNase R are paralogous members of the RNR superfamily of nonspecific, 3'→5', processive exoribonucleases. In Escherichia coli, RNase II plays a primary role in mRNA decay and has a preference for unstructured RNA. RNase R, in contrast, is capable of digesting structured RNA and plays a role in the degradation of both mRNA and stable RNA. Deinococcus radiodurans, a radiation-resistant bacterium, contains two RNR family members. The shorter of these, DrR63, includes a sequence signature typical of RNase R, but we show here that this enzyme is an RNase II-type exonuclease and cannot degrade structured RNA. We also report the crystal structure of this protein, now termed DrII. The DrII structure reveals a truncated RNA binding region in which the N-terminal cold shock domains, typical of most RNR family nucleases, are replaced by an unusual winged helix-turn-helix domain, where the "wing" is contributed by the C-terminal S1 domain. Consistent with its truncated RNA binding region, DrII is able to remove 3' overhangs from RNA molecules closer to duplexes than do other RNase II-type enzymes. DrII also displays distinct sensitivity to pyrimidine-rich regions of single-stranded RNA and is able to process tRNA precursors with adenosine-rich 3' extensions in vitro. These data indicate that DrII is the RNase II of D. radiodurans and that its structure and catalytic properties are distinct from those of other related enzymes.     

Cloning and characterization of a small family 19 chitinase from moss (Bryum coronatum)

Chitinase-A (BcChi-A) was purified from a moss, Bryum coronatum, by several steps of column chromatography. The purified BcChi-A was found to be a molecular mass of 25 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and an isoelectric point of 3.5. A cDNA encoding BcChi-A was cloned by rapid amplification of cDNA ends and polymerase chain reaction. It consisted of 1012 nucleotides and encoded an open reading frame of 228 amino acid residues. The predicted mature BcChi-A consists of 205 amino acid residues and has a molecular weight of 22,654. Sequence analysis indicated that BcChi-A is glycoside hydrolase family-19 (GH19) chitinase lacking loops I, II, IV and V, and a C-terminal loop, which are present in the catalytic domain of plant class I and II chitinases. BcChi-A is a compact chitinase that has the fewest loop regions of the GH19 chitinases. Enzymatic experiments using chitooligosaccharides showed that BcChi-A has higher activity toward shorter substrates than class II enzymes. This characteristic is likely due to the loss of the loop regions that are located at the end of the substrate-binding cleft and would be involved in substrate binding of class II enzymes. This is the first report of a chitinase from mosses, nonvascular plants.     

Crystal structure of a bacterial type III polyketide synthase and enzymatic control of reactive polyketide intermediates

In bacteria, a structurally simple type III polyketide synthase (PKS) known as 1,3,6,8-tetrahydroxynaphthlene synthase (THNS) catalyzes the iterative condensation of five CoA-linked malonyl units to form a pentaketide intermediate. THNS subsequently catalyzes dual intramolecular Claisen and aldol condensations of this linear intermediate to produce the fused ring tetrahydroxynaphthalene (THN) skeleton. The type III PKS-catalyzed polyketide extension mechanism, utilizing a conserved Cys-His-Asn catalytic triad in an internal active site cavity, is fairly well understood. However, the mechanistic basis for the unusual production of THN and dual cyclization of its malonyl-primed pentaketide is obscure. Here we present the first bacterial type III PKS crystal structure, that of Streptomyces coelicolor THNS, and identify by mutagenesis, structural modeling, and chemical analysis the unexpected catalytic participation of an additional THNS-conserved cysteine residue in facilitating malonyl-primed polyketide extension beyond the triketide stage. The resulting new mechanistic model, involving the use of additional cysteines to alter and steer polyketide reactivity, may generally apply to other PKS reaction mechanisms, including those catalyzed by iterative type I and II PKS enzymes. Our crystal structure also reveals an unanticipated novel cavity extending into the "floor" of the traditional active site cavity, providing the first plausible structural and mechanistic explanation for yet another unusual THNS catalytic activity: its previously inexplicable extra polyketide extension step when primed with a long acyl starter. This tunnel allows for selective expansion of available active site cavity volume by sequestration of aliphatic starter-derived polyketide tails, and further suggests another distinct protection mechanism involving maintenance of a linear polyketide conformation.     

Chitin oligosaccharide binding to a family GH19 chitinase from the moss Bryum coronatum

Substrate binding of a family GH19 chitinase from a moss species, Bryum coronatum (BcChi-A, 22 kDa), which is smaller than the 26 kDa family GH19 barley chitinase due to the lack of several loop regions ('loopless'), was investigated by oligosaccharide digestion, thermal unfolding experiments and isothermal titration calorimetry (ITC). Chitin oligosaccharides [β-1,4-linked oligosaccharides of N-acetylglucosamine with a polymerization degree of n, (GlcNAc)(n), n = 3-6] were hydrolyzed by BcChi-A at rates in the order (GlcNAc)(6) > (GlcNAc)(5) > (GlcNAc)(4) > (GlcNAc)(3). From thermal unfolding experiments using the inactive BcChi-A mutant (BcChi-A-E61A), in which the catalytic residue Glu61 is mutated to Ala, we found that the transition temperature (T(m) ) was elevated upon addition of (GlcNAc)(n) (n = 2-6) and that the elevation (ΔT(m)) was almost proportional to the degree of polymerization of (GlcNAc)(n). ITC experiments provided the thermodynamic parameters for binding of (GlcNAc)(n) (n = 3-6) to BcChi-A-E61A, and revealed that the binding was driven by favorable enthalpy changes with unfavorable entropy changes. The change in heat capacity (ΔC(p)°) for (GlcNAc)(6) binding was found to be relatively small (-105 ± 8 cal·K(-1) ·mol(-1)). The binding free energy changes for (GlcNAc)(6), (GlcNAc)(5), (GlcNAc)(4) and (GlcNAc)(3) were determined to be -8.5, -7.9, -6.6 and -5.0 kcal·mol(-1), respectively. Taken together, the substrate binding cleft of BcChi-A consists of at least six subsites, in contrast to the four-subsites binding cleft of the 'loopless' family 19 chitinase from Streptomyces coelicolor. DATABASE: Chitinase, EC 3.2.1.14.     

Crystal structure and functional studies reveal that PAS factor from Vibrio vulnificus is a novel member of the saposin-fold family

PAS factor is a novel putative bacterial secretion factor thought to induce secretion of periplasmic proteins. We solved the crystal structure of PAS factor from Vibrio vulnificus at 1.8A resolution and found it to be comprised of five alpha helices that form an antiparallel bundle with an up-and-down topology, and to adopt the saposin-fold characteristic of a family of proteins that bind to membranes and lipids. PAS factor lacks the disulfide bridge characteristic of mammalian saposin-fold proteins; in fact, it shows no sequence homology with mammalian proteins. Nevertheless, the molecular architectures are similar, and the shared propensity for membrane interaction suggests strongly that PAS factor is another member of the saposin-fold family. Analysis of the CD spectra showed that PAS factor binds to membranes directly, while measurement of calcein dye leakage showed that PAS factor interacts strongly with liposomes composed of anionic phospholipids, making them leaky, but binds very weakly with liposomes composed of zwitterionic phospholipids. Moreover, by analyzing tryptophan fluorescence emission from four single-tryptophan mutants (V10W, T22W, F35W, and L70W), we identified the putative phospholipid-binding site of PAS factor. The resultant membrane destabilization likely mediates secretion of periplasmic proteins required for the in vivo survival and pathogenesis of V.vulnificus.     

Backbone chemical shifts assignments, secondary structure, and ligand binding of a family GH-19 chitinase from moss, Bryum coronatum

Family GH19 chitinases have been recognized as important in the plant defense against fungal pathogens. However, their substrate-recognition mechanism is still unknown. We report here the first resonance assignment of NMR spectrum of a GH19 chitinase from moss, Bryum coronatum (BcChi-A). The backbone signals were nearly completely assigned, and the secondary structure was estimated based on the chemical shift values. The addition of the chitin dimer to the enzyme solution perturbed the chemical shifts of HSQC resonances of the amino acid residues forming the putative substrate-binding cleft. Further NMR analysis of the ligand binding to BcChi-A will improve understanding of the substrate-recognition mechanism of GH-19 enzymes.     

A novel type of family 19 chitinase from Aeromonas sp. No.10S-24. Cloning, sequence, expression, and the enzymatic properties.

A family 19 chitinase gene from Aeromonas sp. No.10S-24 was cloned, sequenced, and expressed in Escherichia coli. From the deduced amino acid sequence, the enzyme was found to possess two repeated N-terminal chitin-binding domains, which are separated by two proline-threonine rich linkers. The calculated molecular mass was 70 391 Da. The catalytic domain is homologous to those of plant family 19 chitinases by about 47%. The enzyme produced alpha-anomer by hydrolyzing beta-1,4-glycosidic linkage of the substrate, indicating that the enzyme catalyzes the hydrolysis through an inverting mechanism. When N-acetylglucosamine hexasaccharide [(GlcNAc)6] was hydrolyzed by the chitinase, the second glycosidic linkage from the nonreducing end was predominantly split producing (GlcNAc)2 and (GlcNAc)4. The evidence from this work suggested that the subsite structure of the enzyme was (-2)(-1)(+1)(+2)(+3)(+4), whereas most of plant family 19 chitinases have a subsite structure (-3)(-2)(-1)(+1)(+2)(+3). Thus, the Aeromonas enzyme was found to be a novel type of family 19 chitinase in its structural and functional properties.     

Crystal structure of chondroitin AC lyase, a representative of a family of glycosaminoglycan degrading enzymes.

Glycosaminoglycans (GAGs), highly sulfated polymers built of hexosamine-uronic acid disaccharide units, are major components of the extracellular matrix, mostly in the form of proteoglycans. They interact with a large array of proteins, in particular of the blood coagulation cascade. Degradation of GAGs in mammalian systems occurs by the action of GAG hydrolases. Bacteria express a large number of GAG-degrading lyases that break the hexosamine-uronic acid bond to create an unsaturated sugar ring. Flavobacterium heparinum produces at least five GAG lyases of different specificity. Chondroitin AC lyase (chondroitinase AC, 75 kDa) is highly active toward chondroitin 4-sulfate and chondroitin-6 sulfate. Its crystal structure has been determined to 1.9 A resolution. The enzyme is composed of two domains. The N-terminal domain of approximately 300 residues contains mostly alpha-helices which form a doubly-layered horseshoe (a subset of the (alpha/alpha)6 toroidal topology). The approximately 370 residues long C-terminal domain is made of beta-strands arranged in a four layered beta-sheet sandwich, with the first two sheets having nine strands each. This fold is novel and has no counterpart in full among known structures. The sequence of chondroitinase AC shows low level of homology to several hyaluronate lyases, which likely share its fold. The shape of the molecule, distribution of electrostatic potential, the pattern of conservation of the amino acids and the results of mutagenesis of hyaluronate lyases, indicate that the enzymatic activity resides primarily within the N-terminal domain. The most likely candidate for the catalytic base is His225. Other residues involved in catalysis and/or substrate binding are Arg288, Arg292, Lys298 and Lys299.     

X-ray structure of papaya chitinase reveals the substrate binding mode of glycosyl hydrolase family 19 chitinases

The crystal structure of a chitinase from Carica papaya has been solved by the molecular replacement method and is reported to a resolution of 1.5 A. This enzyme belongs to family 19 of the glycosyl hydrolases. Crystals have been obtained in the presence of N-acetyl- d-glucosamine (GlcNAc) in the crystallization solution and two well-defined GlcNAc molecules have been identified in the catalytic cleft of the enzyme, at subsites -2 and +1. These GlcNAc moieties bind to the protein via an extensive network of interactions which also involves many hydrogen bonds mediated by water molecules, underlying their role in the catalytic mechanism. A complex of the enzyme with a tetra-GlcNAc molecule has been elaborated, using the experimental interactions observed for the bound GlcNAc saccharides. This model allows to define four major substrate interacting regions in the enzyme, comprising residues located around the catalytic Glu67 (His66 and Thr69), the short segment E89-R90 containing the second catalytic residue Glu89, the region 120-124 (residues Ser120, Trp121, Tyr123, and Asn124), and the alpha-helical segment 198-202 (residues Ile198, Asn199, Gly201, and Leu202). Water molecules from the crystal structure were introduced during the modeling procedure, allowing to pinpoint several additional residues involved in ligand binding that were not previously reported in studies of poly-GlcNAc/family 19 chitinase complexes. This work underlines the role played by water-mediated hydrogen bonding in substrate binding as well as in the catalytic mechanism of the GH family 19 chitinases. Finally, a new sequence motif for family 19 chitinases has been identified between residues Tyr111 and Tyr125.     

Determinants of enzymatic specificity in the Cys-Met-metabolism PLP-dependent enzymes family: crystal structure of cystathionine gamma-lyase from yeast and intrafamiliar structure comparison

The crystal structure of cystathionine gamma-lyase (CGL) from yeast has been solved by molecular replacement at a resolution of 2.6 A. The molecule consists of 393 amino acid residues and one PLP moiety and is arranged in the crystal as a tetramer with D2 symmetry as in other related enzymes of the Cys-Met-metabolism PLP-dependent family like cystathionine beta-lyase (CBL). A structure comparison with other family members revealed surprising insights into the tuning of enzymatic specificity between the different family members. CGLs from yeast or human are virtually identical at their active sites to cystathionine gamma-synthase (CGS) from E. coli. Both CGLs and bacterial CGSs exhibit gamma-synthase and gamma-lyase activities depending on their position in the metabolic pathway and the available substrates. This group of enzymes has a glutamate (E333 in yeast CGL) which binds to the distal group of cystathionine (CTT) or the amino group of cysteine. Plant CGSs use homoserine phosphate instead of O-succinyl-homoserine as one substrate. This is reflected by a partially different active site structure in plant CGSs. In CGL and CBL the pseudosymmetric substrate must dock at the active site in different orientations, with S in gamma-position (CBL) or in delta-position (CGL). The conserved glutamate steers the substrate as seen in other CGLs. In CBLs this position is occupied by either tyrosine or hydrophobic residues directing binding of CTT such that S is in the in gamma-position. In methionine gamma-lyase a hydrophic patch operates as recognition site for the methyl group of the methionine substrate.     

Crystal structure of a nonsymbiotic plant hemoglobin

BACKGROUND: Nonsymbiotic hemoglobins (nsHbs) form a new class of plant proteins that is distinct genetically and structurally from leghemoglobins. They are found ubiquitously in plants and are expressed in low concentrations in a variety of tissues including roots and leaves. Their function involves a biochemical response to growth under limited O(2) conditions. RESULTS: The first X-ray crystal structure of a member of this class of proteins, riceHb1, has been determined to 2.4 A resolution using a combination of phasing techniques. The active site of ferric riceHb1 differs significantly from those of traditional hemoglobins and myoglobins. The proximal and distal histidine sidechains coordinate directly to the heme iron, forming a hemichrome with spectral properties similar to those of cytochrome b(5). The crystal structure also shows that riceHb1 is a dimer with a novel interface formed by close contacts between the G helix and the region between the B and C helices of the partner subunit. CONCLUSIONS: The bis-histidyl heme coordination found in riceHb1 is unusual for a protein that binds O(2) reversibly. However, the distal His73 is rapidly displaced by ferrous ligands, and the overall O(2) affinity is ultra-high (K(D) approximately 1 nM). Our crystallographic model suggests that ligand binding occurs by an upward and outward movement of the E helix, concomitant dissociation of the distal histidine, possible repacking of the CD corner and folding of the D helix. Although the functional relevance of quaternary structure in nsHbs is unclear, the role of two conserved residues in stabilizing the dimer interface has been identified.     

Crystal structures and enzymatic properties of a triamine/agmatine aminopropyltransferase from Thermus thermophilus

To maintain functional conformations of DNA and RNA in high-temperature environments, an extremely thermophilic bacterium, Thermus thermophilus, employs a unique polyamine biosynthetic pathway and produces more than 16 types of polyamines. In the thermophile genome, only one spermidine synthase homolog (SpeE) was found and it was shown to be a key enzyme in the pathway. The catalytic assay of the purified enzyme revealed that it utilizes triamines (norspermidine and spermidine) and agmatine as acceptors in its aminopropyl transfer reaction; therefore, the enzyme was denoted as a triamine/agmatine aminopropyltransferase (TAAPT). We determined the crystal structures of the enzyme complexed with and without the aminopropyl group donor S-adenosylmethionine. Despite sequence and structural similarity with spermidine synthases from other organisms, a novel C-terminal β-sheet and differences in the catalytic site were observed. The C-terminal module interacts with the gatekeeping loop and fixes the open conformation of the loop to recognize larger polyamine substrates such as agmatine and spermidine. Additional computational docking studies suggest that the structural differences of the catalytic site also contribute to recognition of the aminopropyl/aminobutyl or guanidium moiety of the substrates of TAAPT. These results explain in part the extraordinarily diverse polyamine spectrum found in T. thermophilus.     

Chromatographic and enzymatic strategies to reveal differences between amidated pectins on a molecular level

The intermolecular distributions of amide groups within two commercial LMA pectins was studied after removal of the methyl esters followed by fractionation of the different populations by anion exchange chromatography. The populations obtained had almost equal degrees of amidation while the values of the degree of blockiness were not the same, indicating also a different intramolecular distribution of the substituents considered as semirandom. Populations from the methyl-esterified amidated pectins showed a rather random distribution for almost all populations. A striking difference between these different populations was that, despite the same level of substitution, the ratio between amide groups and methyl esters varied significantly, indicating a heterogeneous amidation process.     

The first crystal structures of a family 19 class IV chitinase: the enzyme from Norway spruce

Chitinases help plants defend themselves against fungal attack, and play roles in other processes, including development. The catalytic modules of most plant chitinases belong to glycoside hydrolase family 19. We report here x-ray structures of such a module from a Norway spruce enzyme, the first for any family 19 class IV chitinase. The bi-lobed structure has a wide cleft lined by conserved residues; the most interesting for catalysis are Glu113, the proton donor, and Glu122, believed to be a general base that activate a catalytic water molecule. Comparisons to class I and II enzymes show that loop deletions in the class IV proteins make the catalytic cleft shorter and wider; from modeling studies, it is predicted that only three N-acetylglucosamine-binding subsites exist in class IV. Further, the structural comparisons suggest that the family 19 enzymes become more closed on substrate binding. Attempts to solve the structure of the complete protein including the associated chitin-binding module failed, however, modeling studies based on close relatives indicate that the binding module recognizes at most three N-acetylglucosamine units. The combined results suggest that the class IV enzymes are optimized for shorter substrates than the class I and II enzymes, or alternatively, that they are better suited for action on substrates where only small regions of chitin chain are accessible. Intact spruce chitinase is shown to possess antifungal activity, which requires the binding module; removing this module had no effect on measured chitinase activity.