Adaptation of aequorin functional assay to high throughput screening

AequoScreen, a cellular aequorin-based functional assay, has been optimized for luminescent high-throughput screening (HTS) of G protein-coupled receptor (GPCRs). AequoScreen is a homogeneous assay in which the cells are loaded with the apoaequorin cofactor coelenterazine, diluted in assay buffer, and injected into plates containing the samples to be tested. A flash of light is emitted following the calcium increase resulting from the activation of the GPCR by the sample. Here we have validated a new plate reader, the Hamamatsu Photonics FDSS6000, for HTS in 96- and 384-well plates with CHO-K1 cells stably coexpressing mitochondrial apoaequorin and different GPCRs (AequoScreen cell lines). The acquisition time, plate type, and cell number per well have been optimized to obtain concentration-response curves with 4000 cells/well in 384-well plates and a high signal:background ratio. The FDSS6000 and AequoScreen cell lines allow reading of twenty 96- or 384-well plates in 1 h with Z' values of 0.71 and 0.78, respectively. These results bring new insights to functional assays, and therefore reinforce the interest in aequorin-based assays in a HTS environment.     

Galpha(16/z) chimeras efficiently link a wide range of G protein-coupled receptors to calcium mobilization

G protein-coupled receptors (GPCRs) represent a class of important therapeutic targets for drug discovery. The integration of GPCRs into contemporary high-throughput functional assays is critically dependent on the presence of appropriate G proteins. Given that different GPCRs can discriminate against distinct G proteins, a universal G protein adapter is extremely desirable. In this report, the authors evaluated two highly promiscuous Galpha(16/z) chimeras, 16z25 and 16z44, for their ability to translate GPCR activation into Ca(2+) mobilization using the fluorescence imaging plate reader (FLIPR) and aequorin. A panel of 24 G(s)- or G(i)-coupled receptors was examined for their functional association with the Galpha(16/z) chimeras. Although most of the GPCRs tested were incapable of inducing Ca(2+) mobilization upon their activation by specific agonists, the introduction of 16z25 or 16z44 allowed all of these GPCRs to mediate agonist-induced Ca(2+) mobilization. In contrast, only 16 of the GPCRs tested were capable of using Galpha(16) to mobilize intracellular Ca(2+). Analysis of dose-response curves obtained with the delta-opioid, dopamine D(1), and Xenopus melatonin Mel1c receptors revealed that the Galpha(16/z) chimeras possess better sensitivity than Galpha(16) in both the FLIPR and aequorin assays. Collectively, these studies help to validate the promiscuity of the Galpha(16/z) chimeras as well as their application in contemporary drug-screening assays that are based on ligand-induced Ca(2+) mobilization.     

Evaluation of no-wash calcium assay kits: enabling tools for calcium mobilization

The no-wash calcium assay kits developed by Molecular Devices Corporation have greatly enhanced the throughput of cell-based calcium mobilization high-throughput screening (HTS) assays and enabled screening using nonadherent cells. The fluorescent imaging plate reader (FLIPR) Calcium 3 Assay Kit, optimal for targets that have proteins or peptides as agonists, has 2 potential drawbacks: 1) a significant downward spike in fluorescence signal upon liquid transfer that can be the same magnitude as the agonist response, making data analysis difficult; and 2) medium removal is required for some targets, which essentially reintroduces a wash step. Several no-wash products were introduced in 2005. The authors compare the Fluo-4 NW Calcium Assay Kit and the BD Calcium Assay Kit with the FLIPR Calcium 3 Assay Kit using human native rhabdomyosarcoma cells expressing the urotensin-II receptor (UT). The BDtrade mark Calcium Assay Kit gives the best performance in the true no-wash mode, in which both agonist and antagonist activity are easily quantified. Although these new products provide additional options for measuring calcium mobilization, the different results observed with each kit, using the UT receptor as an example, suggest that one should characterize all dyes against each target in a systematic way prior to choosing one for HTS.     

Multiplexed assays by high-content imaging for assessment of GPCR activity

G-protein-coupled receptors (GPCR) participate in many disease pathways and represent the largest family of therapeutic targets. Thus, great investments are made to discover drugs modulating GPCR-mediated events. Among functional assays for screening GPCRs, the Transfluor imaging assay is based on redistribution of cytosolic beta-arrestin to an activated GPCR and has become widely used in high-content screening. However, assessing Transfluor alone has limitations: relying on a single mechanistic step of beta-arrestin redistribution during GPCR activation, providing no information on the stimulated GPCR's intracellular fate, and using only a single fluorescent color (green fluorescent protein). Taking full advantage of high-content imaging to screen approximately 2000 compounds, the authors multiplexed the Transfluor assay with an immunofluorescence-based quantification of GPCR internalization. This approach identified and classified 377 compounds interfering with agonist-induced activation of the Transfluor assay, receptor internalization, or both. In addition, a subset of compounds was analyzed for their performance across imaging, cell-based calcium release (fluorometric imaging plate reader [FLIPR]), and biochemical receptor binding assays (scintillation proximity assay). This indicated that the imaging assays have even better predictive power for direct inhibition of receptor binding than the FLIPR assay. In conclusion, compounds inducing unique responses can suggest novel mechanisms of action and be used as tools to study GPCR activation and internalization.     

Miniaturization of intracellular calcium functional assays to 1536-well plate format using a fluorometric imaging plate reader

The measurement of intracellular calcium response transients in living mammalian cells is a popular functional assay for identification of agonists and antagonists to receptors or channels of pharmacological interest. In recent years, advances in fluorescence-based detection techniques and automation technologies have facilitated the adaptation of this assay to 384-well microplate format high-throughput screening (HTS) assays. However, the cost and time required performing the intracellular calcium HTS assays in the 384-well format can be prohibitive for HTS campaigns of greater than 1 x 10(6) wells. For these reasons, it is attractive to miniaturize intracellular calcium functional assays to the 1536-well microplate format, where assay volumes and plate throughput can be decreased by several fold. The focus of the research described in this article is the miniaturization of an intracellular calcium assay to 1536-well plate format. This was accomplished by modifying the hardware and software of a fluorometric imaging plate reader (FLIPR) to enable transfer of nanoliters of test compound directly to a 1536-well assay plate, and measure the resulting calcium response from all 1536 wells simultaneously. An intracellular calcium functional assay against the rat muscarinic acetylcholine receptor subtype 1 (rmAchR1) G-protein coupled receptor (GPCR) was miniaturized and executed on this modified instrument. In experiments measuring the activity of known muscarinic receptor agonists and antagonists, the miniaturized FLIPR assay gave EC(50) and IC(50) values and rank order potency comparable to the 384-well format assays. Calculated Z' factors for the miniaturized agonist and antagonist assays were, respectively, 0.56 +/- 0.21 and 0.53 +/- 0.22, which were slightly higher (Z'(agonist) = 0.55 +/- 0.33) and lower (Z'(antagonist) = 0.70 +/- 0.18) than the corresponding values in the 384-well assays. A mock agonist HTS campaign against the muscarinic receptor in miniaturized format was able to identify all wells spiked with the rmAchR1 agonist carbachol.     

A functional assay for G-protein-coupled receptors using stably transformed insect tissue culture cell lines

Insect cells are an underexplored resource for functional G-protein-coupled receptor (GPCR) assays, despite a strong record in biochemical (binding) assays. Here we describe the use of vectors capable of creating stably transformed insect cell lines to generate a cell-based functional GPCR assay. This assay employs the luminescent photoprotein aequorin and the promiscuous G-protein subunit Galpha16 and is broadly applicable to human GPCRs. We demonstrate that the assay can quantitate ligand concentration-activity relationships for seven different human GPCRs, can differentiate between partial and full agonists, and can determine rank order potencies for both agonists and antagonists that match those seen with other assay systems. Human Galpha16 improves signal strength but is not required for activity with some receptors. The coexpression of human and bovine betagamma subunits and/or phospholipase Cbeta makes no difference to agonist efficacy or potency. Two different receptors expressed in the same cell line respond to their specific agonists, and two different cell lines (Sf9 and High 5) are able to functionally detect the same expressed GPCR. Sf9 cells have the capability to produce fully functional human receptors, allied to a low background of endogenous receptors, and so are a valuable system for investigating orphan GPCRs and receptor dimerization.     

Analysis of Apparent Noncompetitive Responses to Competitive H(1)-Histamine Receptor Antagonists in Fluorescent Imaging Plate Reader-Based Calcium Assays

We have examined the utility of high throughput fluorescent imaging plate reader (FLIPR)-based calcium assays for pharmacological characterization of G-protein coupled receptors (GPCRs) using recombinant and native human H1-histamine receptors (H(1)-HR), expressed in HEK293 and HeLa S3 cells, respectively, as model systems. For stably transfected HEK293 cell lines, the potency of histamine for elevating intracellular calcium increased (pD(2), 7.13 and 7.86) with increased H(1)-HR density (about 0.8 and 14 pmol/mg protein, respectively), though histamine binding affinities were similar. The classic H(1)-HR competitive antagonists diphenhydramine and chlorpheniramine appeared noncompetitive by causing depressions of the maximal histamine responses along with rightward shifts of histamine concentration-response curves, thus precluding Schild analysis. Applying the generalized Cheng-Prusoff equation to antagonist concentration-response curves for inhibition of fixed histamine concentrations yielded apparent pK(b) values that were consistent among recombinant and native receptors at different expression levels. These pK(b) values for diphenhydramine and chlorpheniramine (e.g., 7.83 and 8.77, respectively) were in good agreement with binding pK(i) values (e.g., 7.98 and 8.52, respectively). Apparent antagonist affinities determined from FLIPR calcium and competition binding assays were also consistent for the competitive antagonists mepyramine, tripelennamine, and promethazine. In phosphoinositide hydrolysis assays, chlorpheniramine exhibited insurmountable inhibition of histamine calcium responses, although to a lesser extent than that observed in calcium assays; pK(b) values were similar. These results demonstrate that competitive antagonist potencies can be attained from FLIPR-derived data by application of the generalized Cheng-Prusoff equation, despite apparent noncompetitive antagonism under these assay conditions. Apparent noncompetitive antagonist effects may in part be attributable to a lack of equilibrium of histamine and antagonists with H(1)-HR within the short duration of rapid transient effects of histamine on intracellular calcium.     

Delay of intracellular calcium transients using a calcium chelator: application to high-throughput screening of the capsaicin receptor ion channel and G-protein-coupled receptors.

Whole-cell functional assays are often used for high-throughput screening (HTS) of molecular targets such as ion channels and G-protein-coupled receptors. A common method for assaying the activity of these membrane proteins is to measure the change in intracellular calcium concentration upon receptor stimulation. These changes in calcium concentration are typically transient and therefore not readily adapted to high-density plate formats used in HTS instruments. We have demonstrated that an intracellular calcium chelator, BAPTA, was able to delay by 5- to 20-fold and extend for several minutes the observed calcium signals initiated by extracellular calcium influx or release of calcium from intracellular stores. As examples, we used cells expressing a calcium-permeable ion channel, vanilloid receptor type 1 (the capsaicin receptor), and two G-protein-coupled receptors. These receptor-mediated increases in intracellular calcium concentration were measured by both fluorescence-based and luminescence-based detection methods. The use of an intracellular calcium chelator to delay calcium signaling should have wide application since it allows the measurement of the functional activity of any cellular receptor that signals through calcium. With this procedure, calcium fluorescence and luminescence whole-cell functional assays may be performed with standard laboratory pipetting and detection systems.     

USE OF FLUORESCENCE POLARIZATION DETECTION FOR THE MEASUREMENT OF FLUOPEPTIDE™ BINDING TO G PROTEIN-COUPLED RECEPTORS

ABSTRACT

G protein-coupled receptors (GPCRs) represent the single largest molecular target of therapeutic drugs currently on the market, and are also the most common target in high throughput screening assays designed to identify potential new drug candidates. A large percentage of these assays are now formatted as radioligand binding assays. Fluorescence polarization ligand binding assays can offer a non-rad alternative to radioligand binding assays. In addition, fluorescence polarization assays are a homogenous format that is easy to automate for high throughput screening. We have developed a series of peptide ligands labeled with the fluorescent dye BODIPY® TMR whose binding to GPCRs can be detected using fluorescence polarization methodology. BODIPY® TMR has advantages over the more commonly used fluorescein dye in high throughput screening (HTS) assays due to the fact that its excitation and emission spectra are red-shifted approximately 50 nm relative to fluorescein. Assays based on BODIPY® TMR ligands are therefore less susceptible to interference from tissue auto-fluorescence in the assay matrix, or the effects of colored or fluorescent compounds in the screening libraries. A series of BODIPY® TMR labeled peptides have been prepared that bind to a range of GPCRs including melanin concentrating hormone, bradykinin, and melanocortin receptors. Conditions have been optimized in order to utilize a comparable amount of receptor membrane preparation as is used in a radioligand binding assay. The assays are formatted in 384-well microplates with a standard volume of 40 µL. We have compared the assays across the different fluorescence polarization (FP) readers available to determine the parameters for each instrument necessary to achieve the required precision.     

Use of fluorescence polarization detection for the measurement of fluopeptidetm binding to G protein-coupled receptors

G protein-coupled receptors (GPCRs) represent the single largest molecular target of therapeutic drugs currently on the market, and are also the most common target in high throughput screening assays designed to identify potential new drug candidates. A large percentage of these assays are now formatted as radioligand binding assays. Fluorescence polarization ligand binding assays can offer a non-rad alternative to radioligand binding assays. In addition, fluorescence polarization assays are a homogenous format that is easy to automate for high throughput screening. We have developed a series of peptide ligands labeled with the fluorescent dye BODIPY TMR whose binding to GPCRs can be detected using fluorescence polarization methodology. BODIPY TMR has advantages over the more commonly used fluorescein dye in high throughput screening (HTS) assays due to the fact that its excitation and emission spectra are red-shifted approximately 50 nm relative to fluorescein. Assays based on BODIPY TMR ligands are therefore less susceptible to interference from tissue auto-fluorescence in the assay matrix, or the effects of colored or fluorescent compounds in the screening libraries. A series of BODIPY TMR labeled peptides have been prepared that bind to a range of GPCRs including melanin concentrating hormone, bradykinin, and melanocortin receptors. Conditions have been optimized in order to utilize a comparable amount of receptor membrane preparation as is used in a radioligand binding assay. The assays are formatted in 384-well microplates with a standard volume of 40 microL. We have compared the assays across the different fluorescence polarization (FP) readers available to determine the parameters for each instrument necessary to achieve the required precision.     

Cell-Based Assays for High-Throughput Screening

Cell-based assays represent approximately half of all high-throughput screens currently performed. Here, we review in brief the history and status of high-throughput screening (HTS), and summarize some of the challenges and benefits associated with the use of cell-based assays in HTS. Approaches for successful experimental design and execution of cell-based screens are introduced, including strategies for assay development, implementation of primary and secondary screens, and target identification. In doing so, we hope to provide a comprehensive review of the cell-based HTS process and an introduction to the methodologies and techniques used.     

A fluorescent ligand-binding alternative using Tag-lite® technology

G-protein-coupled receptors (GPCRs) are crucial cell surface receptors that transmit signals from a wide range of extracellular ligands. Indeed, 40% to 50% of all marketed drugs are thought to modulate GPCR activity, making them the major class of targets in the drug discovery process. Binding assays are widely used to identify high-affinity, selective, and potent GPCR drugs. In this field, the use of radiolabeled ligands has remained so far the gold-standard method. Here the authors report a less hazardous alternative for high-throughput screening (HTS) applications by the setup of a nonradioactive fluorescence-based technology named Tag-lite(?). Selective binding of various fluorescent ligands, either peptidic or not, covering a large panel of GPCRs from different classes is illustrated, particularly for chemokine (CXCR4), opioid (δ, μ, and κ), and cholecystokinin (CCK1 and CCK2) receptors. Affinity constants of well-known pharmacological agents of numerous GPCRs are in line with values published in the literature. The authors clearly demonstrate that the Tag-lite binding assay format can be successfully and reproducibly applied by using different cellular materials such as transient or stable recombinant cells lines expressing SNAP-tagged GPCR. Such fluorescent-based binding assays can be performed with adherent cells or cells in suspension, in 96- or 384-well plates. Altogether, this new technology offers great advantages in terms of flexibility, rapidity, and user-friendliness; allows easy miniaturization; and makes it completely suitable for HTS applications.     

Comparison of high throughput screening technologies for luminescence cell-based reporter screens

As higher density formats become more and more common in HTS labs, the expectations for maintaining faster, lower cost screens puts great pressure on traditional 96-well screens. In some cases higher density formats are not compatible with the assay. This seems especially true in cell-based assays. In our case, the nature of the cells' response forced us to remain in 96-well plates. In this paper, we describe the development of a luminescence reporter assay and its performance in two detection modes, flash and glow. The advantages in cost and throughput for each technique are explored, along with automation considerations. An additional new technology, the use of pins for low-volume transfers, is also briefly described because of its dramatic effect on our screen's throughput. However, it will be more thoroughly presented in a future publication. Comparing the technologies available for HTS aids in designing automated systems that meet the unique needs of each assay.     

Multiplexed G-protein-coupled receptor Ca2+ flux assays for high-throughput screening

An early drug discovery approach focusing on gene families can benefit from strategies that exploit common signaling mechanisms to more effectively identify and characterize novel chemical lead structures. Multiplexing, defined as the screening of multiple targets within the same experiment, is an example of this strategy. Here, the authors describe a technique that allows multiplexing of a common assay type used to study G-protein-coupled receptors: changes in intracellular Ca2+ levels as measured by Molecular Device's fluorometric imaging plate reader (FLIPR). The multiplexed FLIPR assays showed the expected pharmacological properties of single assays, with good reproducibility and Z* factors. The authors used them to screen large compound libraries in 2 multiplexed assay designs. The 1st used a single-cell line expressing 2 different receptors and the 2nd a mixture of 2 cell lines of the same type each expressing distinct receptors. Screening using these multiplexed assays produced significant savings in reagents, time, and human resources and allowed the authors to quickly identify specific and selective hits.     

Development of a high-throughput screening method for LIM kinase 1 using a luciferase-based assay of ATP consumption

Kinases are attractive drug targets because of the central roles they play in signal transduction pathways and human diseases. Their well-formed adenosine triphosphate (ATP)-binding pockets make ideal targets for small-molecule inhibitors. For drug discovery purposes, many peptide-based kinase assays have been developed that measure substrate phosphorylation using fluorescence-based readouts. However, for some kinases these assays may not be appropriate. In the case of the LIM kinases (LIMK), an inability to phosphorylate peptide substrates resulted in previous high-throughput screens (HTS) using radioactive labeling of recombinant cofilin protein as the readout. We describe the development of an HTS-compatible assay that measures relative ATP levels using luciferase-generated luminescence as a function of LIMK activity. The assay was inexpensive to perform, and proof-of-principle screening of kinase inhibitors demonstrated that compound potency against LIMK could be determined; ultimately, the assay was used for successful prosecution of automated HTS. Following HTS, the secondary assay format was changed to obtain more accurate measures of potency and mechanism of action using more complex (and expensive) assays. The luciferase assay nonetheless provides an inexpensive and reliable primary assay for HTS that allowed for the identification of LIMK inhibitors to initiate discovery programs for the eventual treatment of human diseases.     

Validation of a fluorescent imaging plate reader membrane potential assay for high-throughput screening of glycine transporter modulators

A fluorescent imaging plate reader (FLIPR) membrane potential (V(m)) assay was evaluated for pharmacological characterization and high-throughput screening (HTS) of rat glycine transporter type 2 (rGlyT(2)) in a stable rGlyT(2)-HEK cell line. Data show that glycine activation of rGlyT(2) consistently results in a concentration-dependent V(m) response on the FLIPR that is blocked by the potent and selective GlyT(2) antagonist 4-benzyloxy-3,5-dimethoxy-N-[1-dimethylamino-cyclopentyl)methyl]-benz-amide (Org-25543). Agonist and antagonist pharmacologies match those reported using conventional [(3)H]glycine uptake assays and electrophysiology. The glycine response is dependent on buffer ionic composition consistent with GlyT(2) physiology. Assay signal-to-background and coefficient of variation meets sufficient statistical criteria to conduct HTS. The results of a screen of the chemical inventory demonstrate that the assay is able to successfully identify and confirm GlyT(2) inhibitors. The advantages of this assay are its homogeneity, compatibility with both 96- and 384-well formats, and lack of radioactivity usage. Thus, the authors conclude that a fluorescence-based V(m) assay on FLIPR is a viable approach for identification and pharmacological profiling of small molecule modulators of the electrogenic transporter rGlyT(2).     

Novel patient cell-based HTS assay for identification of small molecules for a lysosomal storage disease

Small molecules have been identified as potential therapeutic agents for lysosomal storage diseases (LSDs), inherited metabolic disorders caused by defects in proteins that result in lysosome dysfunctional. Some small molecules function assisting the folding of mutant misfolded lysosomal enzymes that are otherwise degraded in ER-associated degradation. The ultimate result is the enhancement of the residual enzymatic activity of the deficient enzyme. Most of the high throughput screening (HTS) assays developed to identify these molecules are single-target biochemical assays. Here we describe a cell-based assay using patient cell lines to identify small molecules that enhance the residual arylsulfatase A (ASA) activity found in patients with metachromatic leukodystrophy (MLD), a progressive neurodegenerative LSD. In order to generate sufficient cell lines for a large scale HTS, primary cultured fibroblasts from MLD patients were transformed using SV40 large T antigen. These SV40 transformed (SV40t) cells showed to conserve biochemical characteristics of the primary cells. Using a specific colorimetric substrate para-nitrocatechol sulfate (pNCS), detectable ASA residual activity were observed in primary and SV40t fibroblasts from a MLD patient (ASA-I179S) cultured in multi-well plates. A robust fluorescence ASA assay was developed in high-density 1,536-well plates using the traditional colorimetric pNCS substrate, whose product (pNC) acts as "plate fluorescence quencher" in white solid-bottom plates. The quantitative cell-based HTS assay for ASA generated strong statistical parameters when tested against a diverse small molecule collection. This cell-based assay approach can be used for several other LSDs and genetic disorders, especially those that rely on colorimetric substrates which traditionally present low sensitivity for assay-miniaturization. In addition, the quantitative cell-based HTS assay here developed using patient cells creates an opportunity to identify therapeutic small molecules in a disease-cellular environment where potentially disrupted pathways are exposed and available as targets.     

G-protein-coupled receptors in drug discovery: nanosizing using cell-free technologies and molecular biology approaches

Signal transduction by G-protein-coupled receptors (GPCRs) underpins a multitude of physiological processes. Ligand recognition by the receptor leads to activation of a generic molecular switch involving heterotrimeric G-proteins and guanine nucleotides. Signal transduction has been studied extensively with both cell-based systems and assays comprising isolated signaling components. Interest and commercial investment in GPCRs in areas such as drug targets, orphan receptors, high throughput screening, biosensors, and so on will focus greater attention on assay development to allow for miniaturization, ultra-high throughput and, eventually, microarray/biochip assay formats. Although cell-based assays are adequate for many GPCRs, it is likely that these formats will limit the development of higher density GPCR assay platforms mandatory for other applications. Stable, robust, cell-free signaling assemblies comprising receptor and appropriate molecular switching components will form the basis of future GPCR assay platforms adaptable for such applications as microarrays. The authors review current cell-free GPCR assay technologies and molecular biological approaches for construction of novel, functional GPCR assays.     

Homogeneous time-resolved G protein-coupled receptor–ligand binding assay based on fluorescence cross-correlation spectroscopy

G protein-coupled receptors (GPCRs) mediate many important physiological functions and are considered as one of the most successful therapeutic target classes for a wide spectrum of diseases. Drug discovery projects generally benefit from a broad range of experimental approaches for screening compound libraries and for the characterization of binding modes of drug candidates. Owing to the difficulties in solubilizing and purifying GPCRs, assay formats have been so far mainly limited to cell-based functional assays and radioligand binding assays. In this study, we used fluorescence cross-correlation spectroscopy (FCCS) to analyze the interaction of detergent-solubilized receptors to various types of GPCR ligands: endogenous peptides, small molecules, and a large surrogate antagonist represented by a blocking monoclonal antibody. Our work demonstrates the suitability of the homogeneous and time-resolved FCCS assay format for a robust, high-throughput determination of receptor–ligand binding affinities and kinetic rate constants for various therapeutically relevant GPCRs.