Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels

Novel pH- and temperature-sensitive biodegradable poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol) (PCLA-PEG) block copolymers were synthesized with oligomeric sulfamethazine (OSM) end groups (OSM-PCLA-PEG-PCLA-OSM). Aqueous solutions of these block copolymers have shown sol-gel transition behavior upon both temperature and pH changes under physiological conditions (37 degrees C, pH 7.4). The sol-gel transition of these block copolymer solutions was fine-tuned by controlling the PEG length, the hydrophobic to hydrophilic block ratio (PCLA/PEG), and the molecular weight of the sulfamethazine oligomer. Since changes in temperature do not induce gel formation in this pH- and temperature-sensitive block copolymer solution, this hydrogel can be employed as an injectable carrier using a long guide catheter into the body. In addition, the pH of the block copolymer solution showed no change following PCLA degradation over 1 month, and no indication of gel collapse was observed on addition of buffer solution. As such, these properties make the OSM-PCLA-PEG-PCLA-OSM hydrogel an ideal candidate for use as an injectable carrier for certain protein-based drugs known to denature in low-pH environments.     

Catechol-functionalized chitosan/pluronic hydrogels for tissue adhesives and hemostatic materials

Bioinspired from adhesion behaviors of mussels, injectable and thermosensitive chitosan/Pluronic composite hydrogels were synthesized for tissue adhesives and hemostatic materials. Chitosan conjugated with multiple catechol groups in the backbone was cross-linked with terminally thiolated Pluronic F-127 triblock copolymer to produce temperature-sensitive and adhesive sol-gel transition hydrogels. A blend mixture of the catechol-conjugated chitosan and the thiolated Pluronic F-127 was a viscous solution state at room temperature but became a cross-linked gel state with instantaneous solidification at the body temperature and physiological pH. The adhesive chitosan/Pluronic injectable hydrogels with remnant catechol groups showed strong adhesiveness to soft tissues and mucous layers and also demonstrated superior hemostatic properties. These chitosan/Pluronic hydrogels are expected to be usefully exploited for injectable drug delivery depots, tissue engineering hydrogels, tissue adhesives, and antibleeding materials.     

Controlled thermoresponsive hydrogels by stereocomplexed PLA-PEG-PLA prepared via hybrid micelles of pre-mixed copolymers with different PEG lengths

The stereocomplexed hydrogels derived from the micelle mixture of two enantiomeric triblock copolymers, PLLA-PEG-PLLA and PDLA-PEG-PDLA, reported in 2001 exhibited sol-to-gel transition at approximately body temperature upon heating. However, the showed poor storage modulus (ca. 1000 Pa) determined their insufficiency as injectable implant biomaterials for many applications. In this study, the mechanical property of these hydrogels was significantly improved by the modifications of molecular weights and micelle structure. Co-micelles composed of block copolymers with two sizes of PEG block length were shown to possess unique and dissimilar properties from the micelles composed of single-sized block copolymers. The stereomixture of PLA-PEG-PLA comicelles showed a controllable sol-to-gel transition at a wide temperature range of 4 and 80 °C. The sol-gel phase diagram displays a linear relationship of temperature versus copolymer composition; hence, a transition at body temperature can be readily achieved by adjusting the mixed copolymer ratio. The resulting thermoresponsive hydrogels exhibit a storage modulus notably higher (ca. 6000 Pa) than that of previously reported hydrogels. As a physical network solely governed by self-reorganization of micelles, followed by stereocomplexation, this unique system offers practical, safe, and simple implantable biomaterials.     

New biodegradable thermogelling copolymers having very low gelation concentrations

New biodegradable multiblock amphiphilic and thermosensitive poly(ether ester urethane)s consisting of poly[(R)-3-hydroxybutyrate] (PHB), poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) blocks were synthesized, and their aqueous solutions were found to undergo a reversible sol-gel transition upon temperature change at very low copolymer concentrations. The multiblock poly(ether ester urethane)s were synthesized from diols of PHB, PEG, and PPG using 1,6-hexamethylene diisocyanate as a coupling reagent. The chemical structures and molecular characteristics of the copolymers were studied by GPC, 1H NMR, 13C NMR, and FTIR. The thermal stability of the poly(PEG/PPG/PHB urethane)s was studied by thermogravimetry analysis (TGA), and the PHB contents were calculated based on the thermal degradation profile. The results were in good agreement with those obtained from the 1H NMR measurements. The poly(PEG/PPG/ PHB urethane)s presented better thermal stability than the PHB precursors. The water soluble poly(ether ester urethane)s had very low critical micellization concentration (CMC). Aqueous solutions of the new poly(ether ester urethane)s underwent a sol-gel-sol transition as the temperature increased from 4 to 80 degrees C, and showed a very low critical gelation concentration (CGC) ranging from 2 to 5 wt %. As a result of its multiblock architecture, a novel associated micelle packing model can be proposed for the sol-gel transition for the copolymer gels of this system. The new material is thought to be a promising candidate for injectable drug systems that can be formulated at low temperatures and forms a gel depot in situ upon subcutaneous injection.     

In vitro and in vivo release of albumin using a biodegradable MPEG-PCL diblock copolymer as an in situ gel-forming carrier

An MPEG-PCL diblock copolymer was synthesized as an in situ gel carrier, and its phase transition behavior in aqueous solutions was examined. For comparison, aqueous solutions of Pluronic F-127, a widely used injectable gel-forming solution, were also studied. Both MPEG-PCL copolymer and Pluronic aqueous solutions were sols at room temperature. As the temperature was increased above room temperature, the diblock copolymer and Pluronic solutions underwent a sol-to-gel phase transition, which manifested as an increase in viscosity indicative of the formation of a gel. All of the copolymer solutions became gels at body temperature, although the gel viscosity increased with the increasing concentration of the MPEG-PCL diblock copolymer in the solution. In in vitro experiments, in which the gels were exposed to PBS, the MPEG-PCL gels maintained their structural integrity for more than 28 days, whereas the Pluronic gel disappeared within 2 days. The same results were observed when the polymer solutions were subcutaneously injected into rats. The MPEG-PCL gels maintained their structural integrity longer than 30 days, while the Pluronic gel could not be observed after 2 days. The ability of the gels as drug carriers was studied by measuring the release of fluorescein isothiocyanate-labeled bovine serum albumin (BSA-FITC) from MPEG-PCL diblock copolymer gels in vitro as well as in vivo. In vitro, BSA release was sustained above 20 days, with a greater release at lower diblock copolymer concentration; by contrast, Pluronic gels exhibited almost complete release of BSA-FITC within 1 day. When the BSA-FITC-loaded diblock copolymer and Pluronic solutions were subcutaneously injected into rats, they immediately transformed into a gel. In vivo, sustained release of BSA-FITC over 30 days was observed from the MPEG-PCL gel, whereas BSA-FITC release from the Pluronic gel ceased within 3 days. Collectively, the present findings show that MPEG-PCL diblock copolymer solutions are thermo-responsive and maintain their structural integrity under physiological conditions, indicating that they are suitable for use as injectable drug carriers.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol)

We are reporting alternating multiblock copolymers of poly(L-lactic acid)/poly(ethylene glycol) aqueous solution (> 15 wt %) undergoing sol-gel-sol transition as the temperature increases from 20 to 60 degrees C. Micelles of the multiblock copolymers (in water) are about 20 nm in radius at low temperature. They are aggregated to a larger size as the temperature increases, which should play a critical role in the sol-to-gel transition. The transition temperature and gel window were affected by the molecular weight and composition of the multiblock copolymer. In particular, the aqueous solution of an alternating multiblock copolymer (Mn approximately 6700 daltons) prepared from poly(ethylene glycol) (Mn approximately 600 daltons) and poly(L-lactic acid) (Mn approximately 1300 daltons) showed a maximum modulus at body temperature (37 degrees C). The in situ gel forming ability of the polymer aqueous solution in vivo as well as in vitro indicates that it can be a promising injectable biomaterial.     

Influence of LA and GA sequence in the PLGA block on the properties of thermogelling PLGA-PEG-PLGA block copolymers

This paper reports the influence of sequence structures of block copolymers composed of poly(lactic acid-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG) on their thermogelling aqueous behaviors. A series of thermogelling PLGA-PEG-PLGA triblock copolymers with similar chemical compositions and block lengths but different sequences of D,L-lactide (LA) and glycolide (GA) in the PLGA block were synthesized. The difference of sequence structures arises from the different reactivities of LA and GA during the copolymerization and the transesterification after polymerization. The sol-gel transition temperature and height of gel window were found to be regulated by the sequence structure. Our study reveals that the macromolecular sequence structure influences the hydrophobic/hydrophilic balance of this kind of amphiphilic copolymers and thus alters mesoscopic micellization and the forthcoming macroscopic physical gelation in water. This finding might be helpful to guide the molecular design of the underlying thermogelling systems as injectable hydrogels.     

In-situ injectable physically and chemically gelling NIPAAm-based copolymer system for embolization

The goal of this work is to make an injectable physically and chemically cross-linking NIPAAm-based copolymer system for endovascular embolization. A copolymer with N-isopropylacrylamide (NIPAAm) and hydroxyethyl methacrylate (HEMA) was synthesized and converted to poly(NIPAAm-co-HEMA-acrylate) functionalized with olefins. When poly(NIPAAm-co-HEMA-acrylate) was mixed with pentaerythritol tetrakis 3-mercaptopropionate (QT) stoichiometrically in a 0.1 N PBS solution of pH 7.4, it formed a temperature-sensitive hydrogel with low swelling through the Michael-type addition reaction and showed improved elastic properties at low frequency compared to physical gelation. This material could be useful for applications requiring water-soluble injection but lower swelling and lower creep properties than available with other soluble in-situ-gelling materials.     

On the characterization of pH-sensitive liposome/polymer complexes

A randomly alkylated copolymer of N-isopropylacrylamide, methacrylic acid and N-vinyl-2-pyrrolidone was characterized with regard to its pH- and temperature-triggered conformational change. It was then complexed to liposomes to produce pH-responsive vesicles. Light scattering and differential scanning calorimetry experiments performed at neutral pH revealed that the polymer underwent coil-to-globule phase transition over a wide range of temperatures. At 37 degrees C and pH 7.4, although the polymer was water-soluble, Fourier transform infrared spectroscopy analysis showed that it was partly dehydrated. At acidic pH, the decrease in the lower critical solution temperature was accompanied by an increase in cooperativity degree of the phase transition. Complexation of copolymer to liposomes did not substantially influence its phase transition. The liposome/copolymer complexes were stable at neutral pH but rapidly released their contents under acidic conditions. The copolymer slightly increased liposome circulation time following intravenous administration to rats. The addition of poly(ethylene glycol) to the formulation had a detrimental effect on pH-sensitivity but enhanced substantially the circulation time.     

Formation of a new stable phase of phosphatidylglycerols.

Dilauroyl and dimyristoylphosphatidylglycerol (DMPG) form a more stable gel state when aqueous suspensions are incubated several days at low temperature (0-2 degrees C), pH 7.4 with 0.15 M NaCl. This gel state is characterized by a higher transition temperature and a higher transition enthalpy. The geometry of this gel state is distinguishable from the metastable gel state that forms rapidly upon hydration on the basis of its x-ray diffraction pattern. Infrared spectra in the CH2 scissoring region indicate that the stable gel phase of DMPG is also characterized by reduced reorientational fluctuations of acyl chains and increased interchain interactions. Analysis of vibrational bands due to ester carbonyl groups of DMPG suggests that the transition to a new gel phase is initiated by changes in the interfacial and/or headgroup region of the bilayer, most likely via formation of interlipid hydrogen bonds. The melting of the stable gel phase of DMPG is accompanied by a gross morphological change resulting in vesiculation.     

An acid-labile block copolymer of PDMAEMA and PEG as potential carrier for intelligent gene delivery systems

Intelligent gene delivery systems based on physiologically triggered reversible shielding technology have evinced enormous interest due to their potential in vivo applications. In the present work, an acid-labile block copolymer consisting of poly(ethylene glycol) and poly(2-(dimethylamino)ethyl methacrylate) segments connected through a cyclic ortho ester linkage (PEG- a-PDMAEMA) was synthesized by atom transfer radical polymerization of DMAEMA using a PEG macroinitiator with an acid-cleavable end group. PEG- a-PDMAEMA condensed with plasmid DNA formed polyplex nanoparticles with an acid-triggered reversible PEG shield. The pH-dependent shielding/deshielding effect of PEG chains on the polyplex particles were evaluated by zeta potential and size measurements. At pH 7.4, polyplexes generated from PEG- a-PDMAEMA exhibited smaller particle size, lower surface charge, reduced interaction with erythrocytes, and less cytotoxicity compared to PDMAEMA-derived polyplexes. At pH 5.0, zeta potential of polyplexes formed from PEG- a-PDMAEMA increased, leveled up after 2 h of incubation and gradual aggregation occurred in the presence of bovine serum albumin (BSA). In contrast, the stably shielded polyplexes formed by DNA and an acid-stable block copolymer, PEG- b-PDMAEMA, did not change in size and zeta potential in 6 h. In vitro transfection efficiency of the acid-labile copolymer greatly increased after 6 h incubation at pH 5.0, approaching the same level of PDMAEMA, whereas there was only slight increase in efficiency for the stable copolymer, PEG- b-PDMAEMA.     

Thermogelling poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer as a thiol-sensitive degradable polymer

We report a reverse thermogelling poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer as a thiol-sensitive biodegradable polymer. The poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) aqueous solutions studied in this research underwent sol-gel-sol or sol-gel-sol-gel transition depending on the molecular weight and concentration of the polymer, whereas the corresponding disulfide multiblock copolymer aqueous solutions underwent sol-gel transition as the temperature increased in a range of 0-60 degrees C. The hydrophobic dye solubilization and dynamic light scattering of the polymer aqueous solution suggest that the poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)s undergo unimer (3 nm) to micelle (12 nm) transition, whereas the disulfide multiblock copolymers undergo unimer (6 nm) to aggregated polymer (600 nm) transition as the temperature increases. The gel duration increased from 6 h (poly(ethylene oxide-b-propylene oxide-b-ethylene oxide)) to more than 12 days (the corresponding disulfide multiblock copolymer) in phosphate buffer saline, and the gel duration of the latter depended on the glutathione concentration of the medium. The model drug, paclitaxel, was released from the in-situ-formed poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) disulfide multiblock copolymer gel in a glutathione concentration-sensitive manner.     

Rheology of gastric mucin exhibits a pH-dependent sol-gel transition

Gastric mucin, a high molecular weight glycoprotein, is responsible for providing the gel-forming properties and protective function of the gastric mucus layer. Bulk rheology measurements in the linear viscoelastic regime show that gastric mucin undergoes a pH-dependent sol-gel transition from a viscoelastic solution at neutral pH to a soft viscoelastic gel in acidic conditions, with the transition occurring near pH 4. In addition to pH-dependent gelation behavior in this system, further rheological studies under nonlinear deformations reveal shear thinning and an apparent yield stress in this material which are also highly influenced by pH.     

pH-Sensitive Liposomes

Abstract

pH sensitive liposomes are lipid compositions that can be destabilized when the external pH is changed; usually from a neutral or slightly alkaline pH to an acidic pH. They are designed to circumvent delivery of liposome contents to the lysosomes of cells following internalization of the vesicle via the endocytic pathway. In the majority of compositions, a lipid containing a pH titratable group is mixed with phosphatidylethanolamine containing unsaturated acyl chains in a molar ratio (pH sensitive component/PE) of 1/4 or greater. There are five major groups of phosphatidylethanolamine containing pH-senstive lipid compositions. These can be classified by their acid-titratable component: phospholipids, acylated amino acids, fatty acids, cholesterol derivatives and miscellaneous double chain amphiphiles. The biophysical mechanism of action involves a transition of the lipids from the lamellar phase to the hexagonal phase. In cell culture, pH sensitive vesicles can increase the delivery of fluorescent markers, proteins, cytotoxic compounds, RNA and DNA into the cytoplasm. The mechanism of delivery is suggested to involve the destabilization of the liposome in the endosome as the pH is reduced from 7.4 to 5.0 and subsequent destabilization of, or fusion with, the endosomal membrane; some of the liposome contents are introduced into the cytoplasm. In most cases, the extent of liposome contents delivery into the cytoplasm is less than 1% of the amount that becomes cell associated. However further studies, with more reliable assays to differentiate cytoplasmic from lysosomal delivery, are required to place an exact value on this efficiency. The efficiency of pH sensitive liposomes in vivo is limited by stability of certain of the liposome compositions in serum and targeting to the appropriate cell. Cholesterol hemisuccinate is a particularly attractive component for in vivo use since it stabilizes the liposome when in serum at pH 7.4. The use of pH sensitive liposomes in drug delivery should continue to expand due to the increasing number of macromolecular therapeutic agents with intracellular targets.     

Decisive role of hydrophobic side groups of polypeptides in thermosensitive gelation

Thermosensitive hydrogels based on PEG and poly(l-glutamate)s bearing different hydrophobic side groups were separately synthesized by the ring-opening polymerization (ROP) of l-glutamate N-carboxyanhydrides containing different alkyl protected groups, that is, methyl, ethyl, n-propyl, and n-butyl, using mPEG(45)-NH(2) as macroinitiator. The resulting copolymers underwent sol-gel transitions in response to temperature change. Interestingly, the polypeptides containing methyl and ethyl showed significantly lower critical gelation temperatures (CGTs) than those bearing n-propyl and butyl side groups. Based on the analysis of (13)C NMR spectra, DLS, circular dichroism spectra, and ATR-FTIR spectra, the sol-gel transition mechanism was attributed to the dehydration of poly(ethylene glycol) and the increase of β-sheet conformation content in the polypeptides. The in vivo gelation test indicated that the copolymer solution (6.0 wt %) immediately changed to a gel after subcutaneous injection into rats. The mass loss of the hydrogel in vitro was accelerated in the presence of proteinase K, and the MTT assay revealed that the block copolymers exhibited no detectable cytotoxicity. The present work revealed that subtle variation in the length of a hydrophobic side group displayed the decisive effect on the gelation behavior of the polypeptides. In addition, the thermosensitive hydrogels could be promising materials for biomedical applications due to their good biocompatibility, biodegradability, and the fast in situ gelation behavior.     

Amphiphilic and thermosensitive copolymers based on pullulan and Jeffamine: Synthesis, characterization and physicochemical properties

The synthesis of thermosensitive copolymers based on pullulan and polyether amine was performed in water using a water-soluble carbodiimide and N-hydroxysuccinimide as activators. Jeffamine^® M2005 was chosen as a polyether to impart thermosensitive character to the copolymer. Pullulan was modified into carboxymethylpullulan, to bring carboxylate groups to the polysaccharide so as to further the grafting reaction. The copolymers were characterized by FT-IR, ¹H NMR spectroscopy and molecular weights measurements (by SEC coupled with MALS/DRI/Viscometer lines). The thermosensitive behaviour of CMP-g-M2005 copolymers was studied by fluorescence spectroscopy of pyrene, by rheometry and microDSC measurements. The sol-gel transition temperature was found dependent on the solvent, the grafting degree of M2005 and the concentration of the copolymer. For example it was 35 °C in water, 28 °C in acid buffer (0.1 M, pH 5.4) and 26 °C in saline phosphate buffer (0.15 M, pH 7.4) for a grafting degree of 0.20 at a concentration of 5 wt%.     

Conjugation of Arg-Gly-Asp sequence into thermo-reversible gel as an extracellular matrix for 3T3-L1 fibroblast cell culture

High molecular weight N-isopropylacrylamide copolymers with small amounts of acrylic acid (typically 2–5 mol% in feed) were synthesized by free radical polymerization in benzene and then conjugated with adhesion molecules of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides. Aqueous polymer solutions (5, 6, 8 and 10% w/v) in culture medium (pH 7.4, ionic strength; 0.15 M) with 3T3-L1 fibroblast cells were mixed and poured in Millicells, which supported the gel formation without a significant gel induction time at 36 °C (gelation temperature). The initially formed gel was translucent and became more opaque as the temperature increased. The interaction between fibroblast cells and an artificial matrix of GRGDS containing p(NiPAAm-co-AAc) copolymer gel resulted in effective cell attachment, proliferation and growth. This study supported that specific attachment is the result of the interaction between the integrin families on the fibroblast and the RGD sequence on the p(NiPAAm-co-AAc) copolymer gel.     

Effect of water potential on sol-gel transition and intermolecular interaction of gelatin near the transition temperature

The sol-gel transition of gelatin, measured by thermal analysis and viscosity measurement, was analyzed in terms of the change in hydration state of polymer molecules. A new thermodynamic model was proposed in which the effect of water potential is explicitly taken into account for the evaluation of the free energy change in the sol-gel transition process. Because of the large number of water molecules involved and the small free energy change in the transition process, the contribution of water activity, a(W), was proved to be not negligible in the sol-gel transition process in solutions containing such low-molecular cosolutes as sugars, glycerol, urea, and formamide. The gel-stabilization effect of sugars and glycerol was linear with a(W), which seemed consistent with the contribution of water potential in the proposed model. The different stabilization effect among sugars and glycerol was explained by the difference in solvent ordering, which affects hydrophobic interaction among protein molecules. The gel-destabilization effect of urea and formamide could be explained only by the direct binding of them to protein molecules through hydrogen bonding. On the contrary, the polymer-polymer interaction, measured by the viscosity analysis, in polyethyleneglycol and dextran solutions was not sensitive to the change in a(W), suggesting that no substantial change in hydration state with a(W) occurred in these polymer solutions.     

聚苹果酸- 聚乙二醇- 叶酸纳米共聚物的合成和生物活性的研究

目的:制备聚苹果酸-聚乙二醇-叶酸(PMLA-PEG-FA)纳米共聚物,为构建多功能靶向药物转运系统提供前期工作.方法:配体叶酸(FA)通过α-羟基-ω-醛基聚乙二醇(HO-PEG-CHO)以腙键连接在经过水合肼修饰的聚苹果酸的主链上.核磁共振光谱表征纳米共聚物的结构,动态透析法研究腙键响应不同pH值的断键特性,监测不同pH值共聚物中叶酸的稳定性.并采用SMCC-7721人体肝癌细胞测定该纳米共聚物的细胞毒性.结果:1、经核磁共振表征PMLA-PEG-FA共聚物合成完成.2、在pH5.5、pH6.5及pH7.4的PBS缓冲体系中,6h后配体叶酸累积释放率分别为88.1％,85.3％和41.6％.3、MTT实验证实PMLA-PEG-FA无毒性.结论:PMLA-PEG-FA有望成为智能靶向药物载体.