Cloning and nucleotide sequence of the highly thermostable neutral protease gene from Bacillus stearothermophilus

The gene (nprM) for the highly thermostable neutral protease of Bacillus stearothermophilus MK232 was cloned in Bacillus subtilis using pTB53 as a vector. The nucleotide sequence of nprM and its flanking regions was determined. The DNA sequence revealed only one large open reading frame, composed of 1656 base pairs and 552 amino acid residues. A Shine-Dalgarno (SD) sequence was found 12 bases upstream from the translation start site (ATG). A possible promotor sequence (TTTTCC for the -35 region and TATTGT for the -10 region), which was nearly identical to the promoter for another thermostable neutral protease gene, nprT, was also found about 40 bases upstream of the SD sequence. The deduced amino acid sequence contained a signal sequence in its amino-terminal region. The sequence of the first five amino acids of purified extracellular protease completely matched residues 237-241 of the open reading frame. This suggests that the enzyme is translated as a large polypeptide containing a pre-pro structure as is known for other neutral proteases. The amino acid sequence of the extracellular form of this protease (316 amino acids, molecular mass 34,266 Da) was identical to that of the thermostable neutral protease (thermolysin) from Bacillus thermoproteolyticus except for two amino acid substitutions (Asp37 to Asn37 and Glu119 to Gln119). The G + C content of the coding region of nprM was 42 mol%, while that of the third letter of the codons was lower (36 mol%). This extremely low content is an exceptional case for genes from thermophiles. When the protease genes, nprM and nprT, were cloned on pTB53 in B. subtilis, the expression of nprM was about 20 times higher than that of nprT. The reason for the difference between the two systems is discussed.     

Nucleotide sequence of the neopullulanase gene from Bacillus stearothermophilus

The gene (nplT) for a new type of pullulan-hydrolysing enzyme, neopullulanase, from Bacillus stearothermophilus TRS40 was sequenced. The DNA sequence revealed only one large open reading frame, composed of 1764 bases and 588 amino acid residues (Mr 69144). Although the thermostable neopullulanase contained eight cysteine residues, they did not provide conformational stability by disulphide bonds. A comparison was made of the amino acid sequences of alpha-amylase, neopullulanase, isoamylase, pullulanase and cyclodextrin glucanotransferase. All the enzymes examined contained four highly conserved regions which probably constitute the active centres of the enzymes. The amino acid residues required for the specificity of neopullulanase are compared with those of alpha-amylase and other amylolytic enzymes.     

Nucleotide sequence of the Bacillus stearothermophilus alpha-amylase gene.

The nucleotide sequence of the Bacillus stearothermophilus alpha-amylase gene and its flanking regions was determined. An open reading frame was found, comprising a total of 1,647 base pairs (549 amino acids) and starting from a GUG codon as methionine. It was shown by NH2-terminal amino acid sequence analysis that the extracellular amylase consisted of 515 amino acid residues, which corresponded to a molecular weight of 58,779. Thus the NH2-terminal portion of the gene encodes 34 amino acid residues as a signal peptide. The amino acid sequence deduced from the alpha-amylase gene was fairly homologous (61%) with that of another thermostable amylase from Bacillus amyloliquefaciens.     

Highly thermostable neutral protease from Bacillus stearothermophilus

Bacillus stearothermophilus MK232, which produced a highly thermostable neutral protease, was isolated from a natural environment. By several steps of mutagenesis, a hyper-producing mutant strain, YG185, was obtained. The enzyme productivity was twice as much as that of the original strain. This extracellular neutral protease was purified and crystallized. The molecular weight of the enzyme was 34,000 by SDS-polyacrylamide gel electrophoresis and gel filtration. The optimum pH and temperature for the enzyme activity were 7.5 and 70°C, respectively, and the enzyme was stable at pH 5–10 and below 70°C. The thermostability and specific activity of the new protease are around 10% and 40% higher than those of thermolysin (the neutral protease from Bacillus thermoproteolyticus), respectively. The enzyme was inactivated by EDTA, but not by phenylmethylsulfonyl fluoride. These results indicate that the enzyme is a highly thermostable neutral-(metallo)protease.     

Molecular cloning of a thermostable neutral protease gene from Bacillus stearothermophilus in a vector plasmid and its expression in Bacillus stearothermophilus and Bacillus subtilis.

The structural gene for a thermostable protease from Bacillus stearothermophilus was cloned in plasmid pTB90. It is expressed in both B. stearothermophilus and Bacillus subtilis. B. stearothermophilus carrying the recombinant plasmid produced about 15-fold more protease (310 U/mg of cell dry weight) than did the wild-type strain of B. stearothermophilus. Some properties of the proteases that have been purified from the transformants of B. stearothermophilus and B. subtilis were examined. No significant difference was observed among the enzyme properties studied here despite the difference in host cells. We found that the protease, neutral in pH characteristics and with a molecular weight of 36,000, retained about 80% of its activity even after treatment of 65 degrees C for 30 min.     

Nucleotide sequence of the phosphofructokinase gene from Bacillus stearothermophilus and comparison with the homologous Escherichia coli gene

The gene (Bs-pfk) for phosphofructokinase (PFK) from Bacillus stearothermophilus has been cloned and sequenced. The deduced amino acid sequence is nearly identical to the sequence which was previously determined by peptide analysis. The elevated G + C content of Bs-pfk relative to the homologous Ec-pfkA from Escherichia coli is consistent with previous observations concerning genes from thermophilic prokaryotes. A significant degree of homology exists when the deduced amino acid sequence of B. stearothermophilus PFK is compared with the corrected sequences of rabbit muscle PFK or E. coli PFK-1. The cloning and sequencing of Bs-pfk completes the first step toward using site-specific mutagenesis to investigate the structure-function relationships for this allosteric enzyme.     

The effect of cavity-filling mutations on the thermostability of Bacillus stearothermophilus neutral protease.

Cavities in the hydrophobic core of the neutral protease of Bacillus stearothermophilus were analyzed using a three-dimensional model that was inferred from the crystal structure of thermolysin, the highly homologous neutral protease of B. thermoproteolyticus (85% sequence identity). Site-directed mutagenesis was used to fill some of these cavities, thereby improving hydrophobic packing in the protein interior. The mutations had small effects on the thermostability, even after drastic changes, such as Leu284----Trp and Met168----Trp. The effects on T50, the temperature at which 50% of the enzyme is irreversibly inactivated in 30 min, ranged from 0.0 to +0.4 degrees C. These results can be explained by assuming that the mutations have positive and negative structural effects of approximately the same magnitude. Alternatively, it could be envisaged that the local unfolding steps, which render the enzyme susceptible towards autolysis and which are rate limiting in the process of thermal inactivation, are only slightly affected by alterations in the hydrophobic core.     

Expression, purification, and characterization of a thermophilic neutral protease from Bacillus stearothermophilus in Bacillus subtilis

The gene coding for a thermophilic neutral protease from Bacillus stearothermophilus was expressed in Bacillus subtilis DB104, under the control of the sacB gene promoter. This was followed by either the native signal peptide sequence of this protease or the signal peptide sequence of the sacB gene. The protease was purified 3.8-fold, with a specific activity of 16530 U mg-1. As analyzed by SDS-PAGE, the molecular mass of the expressed protease was about 35 kDa, and the optimal temperature and pH of the protease were 65℃ and 7.5, respectively. Moreover, it still had about 80% activity after 1 h reaction at 65℃.     

Expression, purification, and characterization of a thermophilic neutral protease from Bacillus stearothermophilus in Bacillus subtilis

The gene coding for a thermophilic neutral protease from Bacillus stearothermophilus was expressed in Bacillus subtilis DB104, under the control of the sacB gene promoter. This was followed by either the native signal peptide sequence of this protease or the signal peptide sequence of the sacB gene. The protease was purified 3.8-fold, with a specific activity of 16530 U mg-1. As analyzed by SDS-PAGE, the molecular mass of the expressed protease was about 35 kDa, and the optimal temperature and pH of the protease were 65℃ and 7.5, respectively. Moreover, it still had about 80% activity after 1 h reaction at 65 ℃ .     

Nucleotide sequence of the Bacillus subtilis phoR gene.

The nucleotide sequence of phoR, the positive and negative regulatory gene for alkaline phosphatase and phosphodiesterase formation in Bacillus subtilis, was determined. The sequence data predicted an open reading frame of 1,740 base pairs (579 amino acids) which overlaps the 5 base pairs of the preceding phoP coding sequence. The deduced amino acid sequence was significantly homologous with that of the Escherichia coli phoR gene product, which is the sensory element for the pho regulon.