The enzymatic hydrolysis and fermentation of pretreated wheat straw to ethanol

Autohydrolysis and ethanol-alkali pulping were used as pretreatment methods of wheat straw for its subsequent saccharification by Trichoderma reesei cellulase. The basic hydrolysis parameters, i.e., reaction time, pH, temperature, and enzyme and substrate concentration, were optimized to maximize sugar yields from ethanol-alkali modified straw. Thus, a 93% conversion of 2.5% straw material to sugar syrup containing 73% glucose was reached in 48 h using 40 filter paper units/g hydrolyzed substrate. The pretreated wheat straw was then fermented to ethanol at 43 degrees C in the simultaneous saccharification and fermentation (SSF) process using T. reesei cellulase and Kluyveromyces fragilis cells. From 10% (w/v) of chemically treated straw (dry matter), 2.4% (w/v) ethanol was obtained after 48 h. When the T. reesei cellulase system was supplemented with beta-glucosidase from Aspergillus niger, the ethanol yield in the SSF process increased to 3% (w/v) and the reaction time was shortened to 24 h.     

Isolation of thermotolerant ethanologenic yeasts and use of selected strains in industrial scale fermentation in an Egyptian distillery

An enrichment and isolation program for new ethanol-producing thermotolerant yeasts as well as a screening program of some known thermotolerant strains resulted in the selection of several strains capable of growth at 40-43 degrees C. Among these strains four grew and fermented sugar cane molasses at 43 degrees C under batch conditions with sugar-conversion efficiencies >94% and ethanol concentrations 6.8-8.0% (w/v). The two best-performing strains, a Saccharomyces cerevisiae F111 and a Kluyveromyces marxianus WR12 were used in eight 87.5 m(3) fermentation runs (four using each strain) for industrial ethanol production in an Egyptian distillery using sugar cane molasses. Mean ethanol production was 7.7% and 7.4% (w/v), respectively, with an added advantage of cooling elimination during fermentation and higher ethanol yields compared to the distillery's S. cerevisiae SIIC (ATCC 24855) strain in use. The isolate S. cerevisiae F111 was subsequently adopted by the distillery for regular production with significant economical gains and water conservation.     

Simultaneous saccharification and fermentation of pretreated sugar cane leaves to ethanol

The simultaneous saccharification and fermentation (SSF) of pretreated sugar cane leaves to produce ethanol using a cellulolytic enzyme complex from Trichoderma reesei QM 9414 and Saccharomyces cerevisiae NRRL-Y-132 was optimized. Enzymic saccharification parameters were evaluated prior to SSF studies. A 92% conversion of 2·5% substrate (alkaline hydrogen peroxide pretreated) to sugars was achieved at 50°C and pH 4·5, using T. reesei cellulase (40 FPU/g substrate), in 48 h. The pretreated substrate was then subjected to an SSF process using the cellulase complex and S. cerevisiae cells. Optimization of the SSF system is described.     

Evaluation of nanoparticle-immobilized cellulase for improved ethanol yield in simultaneous saccharification and fermentation reactions

Ethanol yields were 2.1 (P = 0.06) to 2.3 (P = 0.01) times higher in simultaneous saccharification and fermentation (SSF) reactions of microcrystalline cellulose when cellulase was physisorbed on silica nanoparticles compared to enzyme in solution. In SSF reactions, cellulose is hydrolyzed to glucose by cellulase while yeast simultaneously ferments glucose to ethanol. The 35°C temperature and the presence of ethanol in SSF reactions are not optimal conditions for cellulase. Immobilization onto solid supports can stabilize the enzyme and promote activity at non-optimum reaction conditions. Mock SSF reactions that did not contain yeast were used to measure saccharification products and identify the mechanism for the improved ethanol yield using immobilized cellulase. Cellulase adsorbed to 40 nm silica nanoparticles produced 1.6 times (P = 0.01) more glucose than cellulase in solution in 96 h at pH 4.8 and 35°C. There was no significant accumulation (<250 μg) of soluble cellooligomers in either the solution or immobilized enzyme reactions. This suggests that the mechanism for the immobilized enzyme's improved glucose yield compared to solution enzyme is the increased conversion of insoluble cellulose hydrolysis products to soluble cellooligomers at 35°C and in the presence of ethanol. The results show that silica-immobilized cellulase can be used to produce increased ethanol yields in the conversion of lignocellulosic materials by SSF.     

The use of cellulases from a beta-glucosidase-hyperproducing mutant of Trichoderma reesei in simultaneous saccharification and fermentation of wheat straw

Conidia of the cellulolytic strain Trichoderma reesei F522 were mutagenized with UV irradiation and N-methyl|-N'-nitro-N-nitrosoguanidine (NTG). A visual agar plate detection system was developed, using esculin and ferric ions, to identify mutants of T. reesei with increased beta-glucosidase activity. Selected mutants were tested for production of extracellular cellulases in shake flasks on autohydrolyzed wheat straw as carbon source. The most active mutant V-7 showed about 6-times higher activity of beta-glucosidase than the parent strain F-522, whereas the filter paper degrading and endo-1,4-beta-D-glucanase activities increased by 45% and by almost 31%, respectively. Cellulase preparations obtained from the parent and mutant strains were then used along with Kluyveromyces fragilis cells for ethanol production from ethanol-alkali pulped straw in the simultaneous saccharification and fermentation (SSF) process. From 10% (w/v) of straw pulp (dry matter), 2.5% (w/v) ethanol was obtained at 43 degrees C after 48 h using cellulase derived from the parent strain of T. reesei. When the beta-glucosidase-hyperproducing mutant V-7 was employed, the ethanol yield in the SSF process increased to 3.4% (w/v), the reaction time was shortened to 24 h and no cellobiose was detected in straw hydrolyzates.     

Ethanol from lignocellulosic materials by a simultaneous saccharification and fermentation process (SFS) with Kluyveromyces marxianus CECT 10875

Simultaneous saccharification and fermentation (SSF) process for ethanol production from various lignocellulosic woody (poplar and eucalyptus) and herbaceous (Sorghum sp. bagasse, wheat straw and Brassica carinata residue) materials has been assayed using the thermotolerant yeast strain Kluyveromyces marxianus CECT 10875. Biomass samples were previously treated in a steam explosion pilot plant to provide pretreated biomass with increased cellulose content relative to untreated materials and to enhance cellulase accessibility. SSF experiments were performed in laboratory conditions at 42 °C, 10% (w/v) substrate concentration and 15 FPU/g substrate of commercial cellulase. The results indicate that it is possible to reach SSF yields in the range of 50–72% of the maximum theoretical SSF yield, based on the glucose available in pretreated materials, in 72–82 h. Maximum ethanol contents from 16 to 19 g/l were obtained in fermentation media, depending on the material tested.     

One-pot bioethanol production from cellulose by co-culture of Acremonium cellulolyticus and Saccharomyces cerevisiae

ABSTRACT: BACKGROUND: While the ethanol production from biomass by consolidated bioprocess (CBP) is considered to be the most ideal process, simultaneous saccharification and fermentation (SSF) is the most appropriate strategy in practice. In this study, one-pot bioethanol production, including cellulase production, saccharification of cellulose, and ethanol production, was investigated for the conversion of biomass to biofuel by co-culture of two different microorganisms such as a hyper cellulase producer, Acremonium cellulolyticus C-1 and an ethanol producer Saccharomyces cerevisiae. Furthermore, the operational conditions of the one-pot process were evaluated for maximizing ethanol concentration from cellulose in a single reactor. RESULTS: Ethanol production from cellulose was carried out in one-pot bioethanol production process. A. cellulolyticus C-1 and S. cerevisiae were co-cultured in a single reactor. Cellulase producing-medium supplemented with 2.5 g/l of yeast extract was used for productions of both cellulase and ethanol. Cellulase production was achieved by A. cellulolyticus C-1 using Solka-Floc (SF) as a cellulase-inducing substrate. Subsequently, ethanol was produced with addition of both 10%(v/v) of S. cerevisiae inoculum and SF at the culture time of 60 h. Dissolved oxygen levels were adjusted at higher than 20% during cellulase producing phase and at lower than 10% during ethanol producing phase. Cellulase activity remained 8--12 FPU/ml throughout the one-pot process. When 50--300 g SF/l was used in 500 ml Erlenmeyer flask scale, the ethanol concentration and yield based on initial SF were as 8.7--46.3 g/l and 0.15--0.18 (g ethanol/g SF), respectively. In 3-l fermentor with 50--300 g SF/l, the ethanol concentration and yield were 9.5--35.1 g/l with their yields of 0.12--0.19 (g/g) respectively, demonstrating that the one-pot bioethanol production is a reproducible process in a scale-up bioconversion of cellulose to ethanol. CONCLUSION: A. cellulolyticus cells produce cellulase using SF. Subsequently, the produced cellulase saccharifies the SF, and then liberated reducing sugars are converted to ethanol by S. cerevisiae. These reactions were carried out in the one-pot process with two different microorganisms in a single reactor, which does require neither an addition of extraneous cellulase nor any pretreatment of cellulose. Collectively, the one-pot bioethanol production process with two different microorganisms could be an alternative strategy for a practical bioethanol production using biomass.     

Evaluation of thermotolerant yeasts in controlled simultaneous saccharifications and fermentations of cellulose to ethanol

Simultaneous saccharification and fermentation (SSF) experiments were performed at selected temperatures (37, 41, and 43 degrees C) to obtain comprehensive material balance and performance data for several promising strains of thermotolerant yeast. Parameters measured were ethanol concentration, yeast cell density, and residual sugar and cellulose concentrations. The three yeasts Saccharomyces uvarum, Candida brassicae, and C. lusitaniae and two mixed cultures of Brettanomyces clausenii with S. cerevisiae (mixed culture I) and C. Iusitaniae with S. uvarum (mixed culture II) exhibited rapid rates of fermentation, high ethanol yields, strong viability, or high cellobiase activity. Overall, mixed culture II at 41 degrees C performed better than either component yeast by themselves because it combined a cellobiose fermenting capability with the high ethanol tolerance and rapid glucose fermentation of conventional industrial yeasts. Thus, the mixed cultures provide good initial rates by preventing buildup of cellobiose (a strong inhibitor of enzyme activity) while attaining high ultimate yields of ethanol for high cellulase concentrations. However, C. brassicae and S. uvarum gave similar results to mixed culture II at 37 degrees C.     

Comparison between immobilized Kluyveromyces fragilis and Saccharomyces cerevisiae coimmobilized with beta-galactosidase, with respect to continuous ethanol production from concentrated whey permeate

Kluyveromyces fragilis immobilized in calcium alginate gel was compared to Saccharomyces cerevisiae coimmobilized with beta-galactosidase, for continuous ethanol production from whey permeate in packed-bed-type columns. Four different whey concentrations were studied, equivalent to 4.5, 10, 15, and 20% lactose, respectively. In all cases the coimmobilized preparation produced more ethanol than K. fragilis. The study went on for more than 5 weeks. K. fragilis showed a decline in activity after 20 days, while the coimmobilized preparation was stableduring the entrire investigation. Under experimental conditions theoretical yields of ethanol were obtained from 4.5 and 10% lactose substrates with the coimmobilized system. Using 15% lactose substrate, theoretical yields were only obtained when a galactose-adapted immobilized S. cerevisiae column was run in series with the coimmobilized column. Then a maximum of 71 g/L ethanol was produced with a productivity of 2.5 g/L h. The coimmobilized column alone gave a maximum ethanol concentration of 52 g/L with a productivity of 4.5 g/L h, whereas immobolized K. fragilis only produced 13 g/L ethanol with a productivity of 1.1 g/L h. It was not possible to obtain theoretical yields of ethanol from the highest substrate concentration.     

Effect of substrate and cellulase concentration on simultaneous saccharification and fermentation of steam-pretreated softwood for ethanol production

Economic optimization of the production of ethanol by simultaneous saccharification and fermentation (SSF) requires knowledge about the influence of substrate and enzyme concentration on yield and productivity. Although SSF has been investigated extensively, the optimal conditions for SSF of softwoods have yet not been determined. In this study, SO2-impregnated and steam-pretreated spruce was used as substrate for the production of ethanol by SSF. Commercial enzymes were used in combination with the yeast Saccharomyces cerevisiae. The effects of the concentration of substrate (2% to 10% w/w) and of cellulases (5 to 32 FPU/g cellulose) were investigated. SSF was found to be sensitive to contamination because lactic acid was produced. The ethanol yield increased with increasing cellulase loading. The highest ethanol yield, 68% of the theoretical based on the glucose and mannose present in the original wood, was obtained at 5% substrate concentration. This yield corresponds to 82% of the theoretical based on the cellulose and soluble glucose and mannose present at the start of SSF. A higher substrate concentration caused inefficient fermentation, whereas a lower substrate concentration, 2%, resulted in increased formation of lactic acid, which lowered the yield. Compared with separate hydrolysis and fermentation, SSF gave a higher yield and doubled the productivity.     

Ethanol production from sugar cane segments in a high solids drum fermentor

Summary A successful yeast fermentation for the production of relatively high concentration of ethanol (9% w/v) was carried out using sugar cane segments. Extraction of sugar from segments occurred simultaneously with ethanol formation. The beer produced was transferred to a fresh batch of sugar cane segments and the fermentation cycle was repeated successively three times with the same beer. A high cane to water ratio was obtained in a rotating drum fermentor which allowed for a minimal amount of liquid to be used during the fermentation process.     

Utilization of dry distiller’s grain and solubles as nutrient supplement in the simultaneous saccharification and ethanol fermentation at high solids loading of corn stover

Dry distiller’s grain and solubles (DDGS) is a major by-product of corn-based ethanol production and is usually used as animal feed. Here, it was added to the simultaneous saccharification and ethanol fermentation (SSF) carried out at high solids loading of steam explosion pretreated corn stover using a mutant strain Saccharomyces cerevisiae DQ1. The performance of SSF process with DDGS was comparable to those using the expensive yeast extract supplementation. With 30% (w/w) solids plus the addition of cellulase and 1 g DDGS l⁻¹, the final ethanol reached 55 g l⁻¹ (7% v/v). The results indicated that the expensive supplement of yeast extract could be replaced by DDGS.     

Saccharification, fermentation, and protein recovery from low-temperature AFEX-treated coastal bermudagrass

Coastal bermudagrass was pretreated by a low-temperature ammonia fiber explosion (AFEX) process, which soaked the grass in liquid ammonia and then explosively released the pressure. Saccharifying enzymes were systematically applied to the AFEX-treated grass corresponding to low, medium, and high loadings of cellulase/hemicellulase (from Trichoderma reesei), cellobiase, glucoamylase, and pectinase. Three-day sugar yields linearly correlated with the logarithm of the cellulase loading. Supplemental enzymes (cellobiase, pectinase) caused upward shifts in the lines. The linearity and upward shifts are consistent with the HCH-1 model of cellulose hydrolysis. The hydrolysis sugars were converted to ethanol using yeast (Saccharomyces cerevisiae). The solid residues were treated with proteases to attempt recovery of valuable proteins. The low-temperature AFEX pretreatment was able o nearly double sugar yields. At the highest cellulase loadings (30 IU/g), the best reducing sugar and ethanol yields were 53% and 44% of the maximum potential, respectively. Protein recovery was, at most, 59% (c) 1994 John Wiley & Sons, Inc.     

Production of ethanol and xylitol from corn cobs by yeasts

Saccharomyces cerevisiae and Candida tropicalis were used separately and as co-culture for simultaneous saccharification and fermentation (SSF) of 5-20% (w/v) dry corn cobs. A maximal ethanol concentration of 27, 23, 21 g/l (w/v) from 200 g/l (w/v) dry corn cobs was obtained by S. cerevisiae, C. tropicalis and the co-culture, respectively, after 96 h of fermentation. However, theoretical yields of 82%, 71% and 63% were observed from 50 g/l dry corn cobs for the above cultures, respectively. Maximal xylitol concentration of 21, 20 and 15 g/l from 200 g/l (w/v) dry corn cobs was obtained by C. tropicalis, co-culture, and S. cerevisiae, respectively. Maximum theoretical yields of 79.0%, 77.0% and 58% were observed from 50 g/l of corn cobs, respectively. The volumetric productivities for ethanol and xylitol increased with the increase in substrate concentration, whereas, yield decreased. Glycerol and acetic acid were formed as minor by-products. S. cerevisiae and C. tropicalis resulted in better product yields (0.42 and 0.36 g/g) for ethanol and (0.52 and 0.71 g/g) for xylitol, respectively, whereas, the co-culture showed moderate level of ethanol (0.32 g/g) and almost maximal levels of xylitol (0.69 g/g).     

Simultaneous saccharification and fermentation of steam-pretreated bagasse using Saccharomyces cerevisiae TMB3400 and Pichia stipitis CBS6054

Sugarcane bagasse--a residue from sugar and ethanol production from sugar cane--is a potential raw material for lignocellulosic ethanol production. This material is high in xylan content. A prerequisite for bioethanol production from bagasse is therefore that xylose is efficiently fermented to ethanol. In the current study, ethanolic fermentation of steam-pretreated sugarcane bagasse was assessed in a simultaneous saccharification and fermentation (SSF) set-up using either Saccharomyces cerevisiae TMB3400, a recombinant xylose utilizing yeast strain, or Pichia stipitis CBS6054, a naturally xylose utilizing yeast strain. Commercial cellulolytic enzymes were used and the content of water insoluble solids (WIS) was 5% or 7.5%. S. cerevisiae TMB3400 consumed all glucose and large fraction of the xylose in SSF. Almost complete xylose conversion could be achieved at 5% WIS and 32 degrees C. Fermentation did not occur with P. stipitis CBS6054 at pH 5.0. However, at pH 6.0, complete glucose conversion and high xylose conversion (>70%) was obtained. Microaeration was required for P. stipitis CBS6054. This was not necessary for S. cerevisiae TMB3400.     

Isolation of new ethanol-tolerant yeasts for fuel ethanol production from sucrose

Summary New ethanol-tolerant yeast strains were isolated from crude recycled yeasts used for fuel ethanol production in the 1983 sugar cane crop. The ethanol-tolerant isolates were able to produce and tolerate ethanol above 20% (v/v) in the fermentation of sugar cane syrup.     

The use of tamarind waste to improve ethanol production from cane molasses

Tamarind wastes such as tamarind husk, pulp, seeds, fruit and the effluent generated during tartaric acid extraction were used as supplements to evaluate their effects on alcohol production from cane molasses using yeast cultures. Small amounts of these additives enhanced the rate of ethanol production in batch fermentations. Tamarind fruit increased ethanol production (9.7%, w/v) from 22.5% reducing sugars of molasses as compared to 6.5% (w/v) in control experiments lacking supplements after 72 h of fermentation. In general, the addition of tamarind supplements to the fermentation medium showed more than 40% improvement in ethanol production using higher cane molasses sugar concentrations. The direct fermentation of aqueous tamarind effluent also yielded 3.25% (w/v) ethanol, suggesting its possible use as a diluent in molasses fermentations. This is the first report, to our knowledge, in which tamarind-based waste products were used in ethanol production. Received 2 April 1998/ Accepted in revised form 13 November 1998     

SSF of steam-pretreated wheat straw with the addition of saccharified or fermented wheat meal in integrated bioethanol production

Background

Integration of second-generation (2G) bioethanol production with existing first-generation (1G) production may facilitate commercial production of ethanol from cellulosic material. Since 2G hydrolysates have a low sugar concentration and 1G streams often have to be diluted prior to fermentation, mixing of streams is beneficial. Improved ethanol concentrations in the 2G production process lowers energy demand in distillation, improves overall energy efficiency and thus lower production cost. There is also a potential to reach higher ethanol yields, which is required in economically feasible ethanol production. Integrated process scenarios with addition of saccharified wheat meal (SWM) or fermented wheat meal (FWM) were investigated in simultaneous saccharification and (co-)fermentation (SSF or SSCF) of steam-pretreated wheat straw, while the possibility of recovering the valuable protein-rich fibre residue from the wheat was also studied.

Results

The addition of SWM to SSF of steam-pretreated wheat straw, using commercially used dried baker’s yeast, S. cerevisiae, resulted in ethanol concentrations of about 60 g/L, equivalent to ethanol yields of about 90% of the theoretical. The addition of FWM in batch mode SSF was toxic to baker’s yeast, due to the ethanol content of FWM, resulting in a very low yield and high accumulation of glucose. The addition of FWM in fed-batch mode still caused a slight accumulation of glucose, but the ethanol concentration was fairly high, 51.2 g/L, corresponding to an ethanol yield of 90%, based on the amount of glucose added.In batch mode of SSCF using the xylose-fermenting, genetically modified S. cerevisiae strain KE6-12, no improvement was observed in ethanol yield or concentration, compared with baker’s yeast, despite the increased xylose utilization, probably due to the considerable increase in glycerol production. A slight increase in xylose consumption was seen when glucose from SWM was fed at a low feed rate, after 48 hours, compared with batch SSCF. However, the ethanol yield and concentration remained in the same range as in batch mode.

Conclusion

Ethanol concentrations of about 6% (w/v) were obtained, which will result in a significant reduction in the cost of downstream processing, compared with SSF of the lignocellulosic substrate alone. As an additional benefit, it is also possible to recover the protein-rich residue from the SWM in the process configurations presented, providing a valuable co-product.

     

BIOETHANOL PRODUCTION FROM LEAFY BIOMASS OF MANGO (Mangifera indica) INVOLVING NATURALLY ISOLATED AND RECOMBINANT ENZYMES

The present study describes the usage of dried leafy biomass of mango (Mangifera indica) containing 26.3% (w/w) cellulose, 54.4% (w/w) hemicellulose, and 16.9% (w/w) lignin, as a substrate for bioethanol production from Zymomonas mobilis and Candida shehatae. The substrate was subjected to two different pretreatment strategies, namely, wet oxidation and an organosolv process. An ethanol concentration (1.21 g/L) was obtained with Z. mobilis in a shake-flask simultaneous saccharification and fermentation (SSF) trial using 1% (w/v) wet oxidation pretreated mango leaves along with mixed enzymatic consortium of Bacillus subtilis cellulase and recombinant hemicellulase (GH43), whereas C. shehatae gave a slightly higher (8%) ethanol titer of 1.31 g/L. Employing 1% (w/v) organosolv pretreated mango leaves and using Z. mobilis and C. shehatae separately in the SSF, the ethanol titers of 1.33 g/L and 1.52 g/L, respectively, were obtained. The SSF experiments performed with 5% (w/v) organosolv-pretreated substrate along with C. shehatae as fermentative organism gave a significantly enhanced ethanol titer value of 8.11 g/L using the shake flask and 12.33 g/L at the bioreactor level. From the bioreactor, 94.4% (v/v) ethanol was recovered by rotary evaporator with 21% purification efficiency.     

Simultaneous saccharification and fermentation of ground corn stover for the production of fuel ethanol using Phanerochaete chrysosporium, Gloeophyllum trabeum, Saccharomyces cerevisiae, and Escherichia coli K011

Enzymatic saccharification of corn stover using Phanerochaete chrysosporium and Gloeophyllum trabeum and subsequent fermentation of the saccharification products to ethanol by Saccharomyces cerevisiae and Escherichia coli K011 were achieved. Prior to simultaneous saccharification and fermentation (SSF) for ethanol production, solid-state fermentation was performed for four days on ground corn stover using either P. chrysosporium or G. trabeum to induce in situ cellulase production. During SSF with S. cerevisiae or E. coli, ethanol production was the highest on day 4 for all samples. For corn stover treated with P. chrysosporium, the conversion to ethanol was 2.29 g/100 g corn stover with S. cerevisiae as the fermenting organism, whereas for the sample inoculated with E. coli K011, the ethanol production was 4.14 g/100 g corn stover. Corn stover treated with G. trabeum showed a conversion 1.90 and 4.79 g/100 g corn stover with S. cerevisiae and E. coli K011 as the fermenting organisms, respectively. Other fermentation co-products, such as acetic acid and lactic acid, were also monitored. Acetic acid production ranged between 0.45 and 0.78 g/100 g corn stover, while no lactic acid production was detected throughout the 5 days of SSF. The results of our experiment suggest that it is possible to perform SSF of corn stover using P. chrysosporium, G. trabeum, S. cerevisiae and E. coli K011 for the production of fuel ethanol.