Mapping of genes controlling aluminum tolerance in rice: comparison of different genetic backgrounds

Aluminum toxicity is the main factor limiting the productivity of crop plants in acid soils, particularly in the tropics and subtropics. In this study, a doubled-haploid population derived from the rice ( Oryza sativa L.) breeding lines CT9993 and IR62266 was used to map genes controlling Al tolerance. A genetic linkage map consisting of 280 DNA markers (RFLP, AFLP and SSR) was constructed to determine the position and nature of quantitative trait loci (QTLs) affecting Al tolerance. Three characters - control root length (CRL), Al-stressed root length (SRL) and root length ratio (RR) - were evaluated for the DH lines and the parents at the seedling stage in nutrient solution. A total of 20 QTLs controlling root growth under Al stress and control conditions were detected and distributed over 10 of the 12 rice chromosomes, reflecting multigenic control of these traits. The two QTLs of largest effect, qALRR-1-1 and qALRR-8 for root length ratio (a measurement of Al tolerance) were localized on chromosomes 1 and 8, respectively. Three other QTLs in addition to qALRR-8 were apparently unique in the CT9993 x IR62266 mapping population, which may explain the high level of Al tolerance in CT9993. Comparative mapping identified a conserved genomic region on chromosome 1 associated with Al tolerance across three rice genetic backgrounds. This region provides an important starting point for isolating genes responsible for different mechanisms of aluminum tolerance and understanding the genetic nature of this trait in rice and other cereals.     

QTL mapping of stay-green in two sorghum recombinant inbred populations

The stay-green trait is a reported component of tolerance to terminal drought stress in sorghum. To map quantitative trait loci (QTLs) for stay-green, two sorghum recombinant inbred populations (RIPs) of 226 F(3:5) lines each were developed from crosses (1) IS9830 x E36-1 and (2) N13 x E36-1. The common parental line, E36-1 of Ethiopian origin, was the stay-green trait source. The genetic map of RIP 1 had a total length of 1,291 cM, with 128 markers (AFLPs, RFLPs, SSRs and RAPDs) distributed over ten linkage groups. The map of RIP 2 spanned 1,438 cM and contained 146 markers in 12 linkage groups. The two RIPs were evaluated during post-rainy seasons at Patancheru, India, in 1999/2000 (RIP 2) and 2000/2001 (RIP 1). The measures of stay-green mapped were the green leaf area percentages at 15, 30 and 45 days after flowering (% GL15, % GL30 and % GL45, respectively). Estimated repeatabilities for % GL15, % GL30 and % GL45 amounted to 0.89, 0.81 and 0.78 in RIP 1, and 0.91, 0.88 and 0.85 in RIP 2, respectively. The number of QTLs for the three traits detected by composite interval mapping ranged from 5 to 8, explaining 31% to 42% of the genetic variance. In both RIPs, both parent lines contributed stay-green alleles. Across the three measures of the stay-green trait, three QTLs on linkage groups A, E and G were common to both RIPs, with the stay-green alleles originating from E36-1. These QTLs were therefore consistent across the tested genetic backgrounds and years. After QTL validation across sites and verification of the general benefit of the stay-green trait for grain yield performance and stability in the target areas, the corresponding chromosomal regions could be candidates for marker-assisted transfer of stay-green into elite materials.     

Multi-environment mapping and meta-analysis of 100-seed weight in soybean

100-Seed weight (100-SW) of soybean is an important but complicated quantitative trait to yield. This study was focus on the quantitative trait loci (QTLs) of soybean 100-SW from 2006 to 2010, using recombination inbred lines population that was derived from a cross between Charleston and Dongnong 594. A total of 23 QTLs for 100-SW were detected in the linkage group C2, D1a, F, G and O. Nine QTLs were identified by composite interval mapping including one QTL with the minimum confidence interval (CI) of 1.3?cM, while 14 QTLs by multiple interval mapping. Furthermore, 94 reported QTLs of 100-SW were integrated with our QTL mapping results using BioMercator. As a result, 15 consensus QTLs and their corresponding markers were identified. The minimum CI was reduced to 1.52?cM by the combination of meta-analysis. These findings may merit fine-mapping of these QTL in soybean.     

QTL mapping of 1000-kernel weight, kernel length, and kernel width in bread wheat (Triticum aestivum L.)

Kernel size and morphology influence the market value and milling yield of bread wheat (Triticum aestivum L.). The objective of this study was to identify quantitative trait loci (QTLs) controlling kernel traits in hexaploid wheat. We recorded 1000-kernel weight, kernel length, and kernel width for 185 recombinant inbred lines from the cross Rye Selection 111 × Chinese Spring grown in 2 agro-climatic regions in India for many years. Composite interval mapping (CIM) was employed for QTL detection using a linkage map with 169 simple sequence repeat (SSR) markers. For 1000-kernel weight, 10 QTLs were identified on wheat chromosomes 1A, 1D, 2B, 2D, 4B, 5B, and 6B, whereas 6 QTLs for kernel length were detected on 1A, 2B, 2D, 5A, 5B and 5D. Chromosomes 1D, 2B, 2D, 4B, 5B and 5D had 9 QTLs for kernel width. Chromosomal regions with QTLs detected consistently for multiple year-location combinations were identified for each trait. Pleiotropic QTLs were found on chromosomes 2B, 2D, 4B, and 5B. The identified genomic regions controlling wheat kernel size and shape can be targeted during further studies for their genetic dissection.     

Linkage Disequilibrium Mapping of Morphological, Resistance, and Other Agronomically Relevant Traits in Modern Spring Barley Cultivars

A set of 148 modern spring barley cultivars was explored for the extent of linkage disequilibrium (LD) between genes governing traits and nearby marker alleles. Associations of agronomically relevant traits (days to heading, plant height), resistance traits (leaf rust, barley yellow dwarf virus (BYD)), and morphological traits (rachilla hair length, lodicule size) with AFLP markers and SSR markers were found. Known major genes and QTLs were confirmed, but also new putative QTLs were found. The LD mapping clearly indicated the common occurrence of Rph3, a gene for hypersensitivity resistance against Puccinia hordei, and also confirmed the QTL Rphq2 for prolonging latency period of P. hordei in seedlings. We also found strong indication for a hitherto not reported gene for resistance or tolerance to BYD on chromosome 2, linked to SSR marker HVM054. Our conclusion is that LD mapping is a valuable additional tool in the search for applicable marker associations with major genes and QTLs. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.     

Association mapping for pre-harvest sprouting resistance in white winter wheat

Association mapping identified quantitative trait loci (QTLs) and the markers linked to pre-harvest sprouting (PHS) resistance in an elite association mapping panel of white winter wheat comprising 198 genotypes. A total of 1,166 marker loci including DArT and SSR markers representing all 21 chromosomes of wheat were used in the analysis. General and mixed linear models were used to analyze PHS data collected over 4 years. Association analysis identified eight QTLs linked with 13 markers mapped on seven chromosomes. A QTL was detected on each arm of chromosome 2B and one each on chromosome arms 1BS, 2DS, 4AL, 6DL, 7BS and 7DS. All except the QTL on 7BS are located in a location similar to previous reports and, if verified, the QTL on 7BS is likely to be novel. Principal components and the kinship matrix were used to account for the presence of population structure but had only a minor effect on the results. Although, none of the QTLs was highly significant across all environments, a QTL on the long arm of chromosome 4A was detected in three different environments and also using the best linear unbiased predictions over years. Although previous reports have identified this as a major QTL, its effects were minor in our biparental mapping populations. The results of this study highlight the benefits of association mapping and the value of using elite material in association mapping for plant breeding programs.     

Genetic resolution and verification of quantitative trait loci for flowering and plant height with recombinant inbred lines of maize.

Recombinant inbred (RI) lines offer several advantages for detecting quantitative trait loci (QTLs), including increased precision of trait measurements, power for detection of additive effects, and resolution of linked QTLs. This study was conducted to detect and characterize QTLs in maize for flowering and plant height and to compare QTL detection in an early (F2:3) generation of the same population. One hundred and eighty-six RIs from a cross between inbred lines Mo17 and H99 were evaluated in a replicated field experiment and analyzed at 101 loci detected by restriction fragment length polymorphisms. QTLs were identified by single-factor analysis of variance. A total of 59 QTLs were detected for plant height, ear height, top height, anthesis, silk emergence, and anthesis to silk interval. Individual QTLs explained 2.2-15.4% of trait variation, and multiple models including all QTLs detected for a trait explained up to 52.5% of the phenotypic variation. Comparison of QTLs detected with 150 F2:3 lines from the same population indicated that 16 (70%) of the 23 F2:3 QTLs were also observed in the F6:7 generation. Parental effects were consistent across generations. At 14 of the 16 QTLs detected in both generations, genetic effects were smaller in the F6:7. Also, some QTLs detected in the F2:3 were resolved into multiple linked QTLs in the F6:7, indicating the additional power of RI populations for mapping, with important implications for marker-assisted selection as well as map-based cloning of QTLs. Key words : Zea mays, RFLP, plant breeding, genetics, recombination.     

Failure to replicate two mate preference QTLs across multiple strains of Drosophila pseudoobscura

Behavioral genetic mapping studies in model organisms predominantly use crosses originating from a single pair of inbred lines to determine the location of alleles that confer genetic variation in the trait of interest, and they often make sweeping generalizations about the genetic architecture of the trait based on these results. A previous study fine mapped mate preference variation between one pair of Drosophila pseudoobscura lines and identified 2 strong-effect behavioral quantitative trait loci (QTLs). Here, we replicated the previous study's mapping design to examine the extent of variation at these behavioral QTLs across 6 pairs of lines, but we were unable to detect effects of either QTL region in the pairs of lines studied. We suggest that the low-discrimination alleles at these 2 QTLs may occur at low frequency within D. pseudoobscura, although other explanations for the inconsistency are possible. These results underscore the need to examine multiple strains across a species when describing the genetic variation underlying behavioral traits.     

Mapping quantitative trait loci for a common bean (Phaseolus vulgaris L.) ideotype.

Breeding a model plant that encompasses individual traits thought to enhance yield potential, known as ideotype breeding, has traditionally focused on phenotypic selection of plants with desirable morphological traits. Broadening this breeding method to the molecular level through the use of molecular markers would avoid the environmental interactions associated with phenotypic selection. A population of 110 F5 recombinant inbred lines (RILs), derived from the cross between WO3391 and 'OAC Speedvale', was used to develop a genetic linkage map consisting of 105 random amplified polymorphic DNA (RAPD), simple sequence repeat (SSR), and sequence-tagged site (STS) markers. The map has a total length of 641 cM distributed across 8 linkage groups (LGs). Five of them were aligned on the core linkage map of bean. Twenty-one quantitative trait loci (QTLs) were identified over three environments for eight agronomic and architectural traits previously defined for a bean (Phaseolus vulgaris L.) ideotype. The QTLs were mapped to seven LGs with several regions containing QTLs for multiple traits. At least one QTL was located for each trait and a maximum of four were associated with lodging. Total explained phenotypic variance ranged from 10.6% for hypocotyl diameter to 45.4% for maturity. Some of the QTLs identified will be useful for early generation selection of tall, upright, high-yielding lines in a breeding program.     

Genetic variation at bx1 controls DIMBOA content in maize

The main hydroxamic acid in maize (Zea mays L.) is 2-4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA). DIMBOA confers resistance to leaf-feeding by several corn borers. Most genes involved in the DIMBOA metabolic pathway are located on the short arm of chromosome 4, and quantitative trait loci (QTLs) involved in maize resistance to leaf-feeding by corn borers have been localized to that region. However, the low resolution of QTL linkage mapping does not allow convincing proof that genetic variation at bx loci was responsible for the variability for resistance. This study addressed the following objectives: to determine the QTLs involved in DIMBOA synthesis across genetically divergent maize inbreds using eight RIL families from the nested association mapping population, to check the stability of QTLs for DIMBOA content across years by evaluating two of those RIL families in 2 years, and to test the involvement of bx1 by performing association mapping with a panel of 281 diverse inbred lines. QTLs were stable across different environments. A genetic model including eight markers explained approximately 34% of phenotypic variability across eight RIL families and the position of the largest QTL co-localizes with the majority of structural genes of the DIMBOA pathway. Candidate association analysis determined that sequence polymorphisms at bx1 greatly affects variation of DIMBOA content in a diverse panel of maize inbreds, but the specific causal polymorphism or polymorphisms responsible for the QTL detected in the region 4.01 were not identified. This result may be because the causal polymorphism(s) were not sequenced, identity is masked by linkage disequilibrium, adjustments for population structure reduce significance of causal polymorphisms or multiple causal polymorphisms affecting bx1 segregate among inbred lines.     

Identification of molecular markers for aluminium tolerance in diploid oat through comparative mapping and QTL analysis

The degree of aluminium tolerance varies widely across cereal species, with oats (Avena spp.) being among the most tolerant. The objective of this study was to identify molecular markers linked to aluminium tolerance in the diploid oat A. strigosa. Restriction fragment length polymorphism markers were tested in regions where comparative mapping indicated the potential for orthologous quantitative trait loci (QTL) for aluminium tolerance in other grass species. Amplified fragment length polymorphism (AFLP) and sequence-characterized amplified region (SCAR) markers were used to provide additional coverage of the genome. Four QTL were identified. The largest QTL explained 39% of the variation and is possibly orthologous to the major gene found in the Triticeae as well as Alm1 in maize and a minor gene in rice. A second QTL may be orthologous to the Alm2 gene in maize. Two other QTL were associated with anonymous markers. Together, these QTL accounted for 55% of the variation. A SCAR marker linked to the major QTL identified in this study could be used to introgress the aluminium tolerance trait from A. strigosa into cultivated oat germplasm. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users. S. Kibite: In Memoriam     

Loci affecting flowering time in oat under short-day conditions.

Flowering time (or days to heading) is an important characteristic in crop plants that affects adaptation to cropping cycles and growing seasons. The objectives of this study were to identify molecular markers associated with flowering time in 3 oat populations developed from Brazilian oat varieties, and to compare their map locations with those of other loci that might influence flowering time. Flowering time was studied in recombinant inbred lines from 3 hexaploid oat populations: UFRGS 8 x Pc68/5*Starter; UFRGS 881971 x Pc68/5*Starter; and UFRGS 8 x UFRGS 930605. Bulked segregant analysis, using amplified fragment length polymorphism, was followed by selective mapping in each population and in a reference population, 'Kanota' x 'Ogle' (KxO). One quantitative trait locus (QTL) with major effects on flowering time was identified in each cross. Comparative mapping showed that a major QTL, with earliness alleles originating from UFRGS 8 and UFRGS 881971, is in a region with close homology to KxO linkage group 17 and to a locus that reportedly confers day-length insensitivity in oat (Di1). This is the first report to identify the map location of the Di1 locus, and putatively confirm the presence of Di1 alleles in new germplasm. Further comparative mapping and the alignment of mapped oat markers with the sequenced rice genome suggest that this QTL and (or) Di1 is orthologous to the Hd1 locus in rice and the CONSTANS gene in Arabidopsis and other species. A different QTL with major effects segregated in the UFRGS 8 x UFRGS 930605 cross, where the early-flowering allele for Di1 was probably fixed. Two additional QTLs with smaller effects were identified in the UFRGS 8 x Pc68/5*Starter population. These results suggest that the Brazilian oat line UFRGS 8 contains an optimal set of alleles conditioning earliness under the short-day conditions of the Brazilian winter growing season, and that molecular selection could be used to introgress these alleles into other breeding material.     

Identification of major quantitative trait loci qSBR11-1 for sheath blight resistance in rice

Sheath blight caused by Rhizoctonia solani Kühn is one of the important diseases of rice, resulting in heavy yield loss in rice every year. No rice line resistant to sheath blight has been identified till date. However, in some rice lines a high degree of resistance to R. solani has been observed. An indica rice line, Tetep, is a well documented source of durable and broad spectrum resistance to rice blast as well as quantitative resistance to sheath blight. The present study identified genetic loci for quantitative resistance to sheath blight in rice line Tetep. A mapping population consisting of 127 recombinant inbred lines derived from a cross between rice cultivars HP2216 (susceptible) and Tetep (resistant to sheath blight) was evaluated for sheath blight resistance and other agronomic traits for 4 years across three locations. Based on sheath blight phenotypes and genetic map with 126 evenly distributed molecular markers, a quantitative trait loci (QTLs) contributing to sheath blight resistance was identified on long arm of chromosome 11. Two QTL mapping approaches i.e., single marker analysis and composite interval mapping in multi environments were used to identify QTLs for sheath blight resistance and agronomical traits. The QTL qSBR11-1 for sheath blight resistance was identified between the marker interval RM1233 (26.45 Mb) to sbq33 (28.35 Mb) on chromosome 11. This region was further narrowed down to marker interval K39516 to sbq33 (~0.85 Mb) and a total of 154 genes were predicted including 11 tandem repeats of chitinase genes which may be responsible for sheath blight resistance in rice line Tetep. A set of 96 varieties and a F₂ population were used for validation of markers linked to the QTL region. The results indicate that there is very high genetic variation among varieties at this locus, which can serve as a starting point for allele mining of sheath blight resistance.     

Exploring the genetic characteristics of 93-11 and Nipponbare recombination inbred lines based on the GoldenGate SNP assay

Understanding genetic characteristics in rice populations will facilitate exploring evolutionary mechanisms and gene cloning. Numerous molecular markers have been utilized in linkage map construction and quantitative trait locus (QTL) mappings. However, segregation-distorted markers were rarely considered, which prevented understanding genetic characteristics in many populations. In this study, we designed a 384-marker GoldenGate SNP array to genotype 283 recombination inbred lines (RILs) derived from 93-11 and Nipponbare Oryza sativa crosses. Using 294 markers that were highly polymorphic between parents, a linkage map with a total genetic distance of 1,583.2 cM was constructed, including 231 segregation-distorted markers. This linkage map was consistent with maps generated by other methods in previous studies. In total, 85 significant quantitative trait loci (QTLs) with phenotypic variation explained (PVE) values≥5% were identified. Among them, 34 QTLs were overlapped with reported genes/QTLs relevant to corresponding traits, and 17 QTLs were overlapped with reported sterility-related genes/QTLs. Our study provides evidence that segregation-distorted markers can be used in linkage map construction and QTL mapping. Moreover, genetic information resulting from this study will help us to understand recombination events and segregation distortion. Furthermore, this study will facilitate gene cloning and understanding mechanism of inter-subspecies hybrid sterility and correlations with important agronomic traits in rice.     

Mapping QTLs associated with drought avoidance in upland rice

The identification of molecular markers linked to genes controlling drought resistance factors in rice is a necessary step to improve breeding efficiency for this complex trait. QTLs controlling drought avoidance mechanisms were analyzed in a doubled-haploid population of rice. Three trials with different drought stress intensities were carried out in two sites. Leaf rolling, leaf drying, relative water content of leaves and relative growth rate under water stress were measured on 105 doubled haploid lines in two trials and on a sub-sample of 85 lines in the third one. Using composite interval mapping with a LOD threshold of 2.5, the total number of QTLs detected in all trials combined was 11 for leaf rolling, 10 for leaf drying, 11 for relative water content and 10 for relative growth rate under stress. Some of these QTLs were common across traits. Among the eleven possible QTLs for leaf rolling, three QTLs (on chromosomes 1, 5 and 9) were common across the three trials and four additional QTLs (on chromosomes 3, 4 and 9) were common across two trials. One QTL on chromosome 4 for leaf drying and one QTL on chromosome 1 for relative water content were common across two trials while no common QTL was identified for relative growth rate under stress. Some of the QTLs detected for leaf rolling, leaf drying and relative water content mapped in the same places as QTLs controlling root morphology, which were identified in a previous study involving the same population. Some QTL identified here were also located similarly with other QTLs for leaf rolling as reported from other populations. This study may help to chose the best segments for introgression into rice varieties and improvement of their drought resistance.     

Identification and mapping of the QTL for aluminum tolerance introgressed from the new source, <Emphasis Type="SmallCaps">ORYZA RUFIPOGON</Emphasis> Griff., into indica rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

This study was conducted to identify and map the quantitative trait locus (QTL) controlling Al tolerance in rice using molecular markers. A population of 171 F(6) recombinant inbred lines (RILs) derived from the cross of Oryza sativa (IR64), the Al susceptible parent, and Oryza rufipogon, the Al tolerant parent, was evaluated for Al tolerance using a nutrient solution with and without 40 ppm of active Al(+3). A genetic map, consisting of 151 molecular markers covering 1,755 cM with an average distance of 11.6 cM between loci, was constructed. Nine QTLs were dentified including one for root length under non-stress conditions (CRL), three for root length under Al stress (SRL) and five for relative root length (RRL). O. rufipogon contributed favorable alleles for each of the five QTLs for RRL, which is a primary parameter for Al tolerance, and individually they explained 9.0-24.9% of the phenotypic variation. Epistatic analysis revealed that CRL was conditioned by an epistatic effect, whereas SRL and RRL were controlled by additive effects. Comparative genetic analysis showed that QTLs for RRL, which mapped on chromosomes 1 and 9, appear to be consistent among different rice populations. Interestingly, a major QTL for RRL, which explained 24.9% of the phenotypic variation, was found on chromosome 3 of rice, which is conserved across cereal species. These results indicate the possibilities to use marker-assisted selection and pyramiding QTLs for enhancing Al tolerance in rice. Positional cloning of such QTLs introgressed from O. rufipogon will provide a better understanding of the Al tolerance mechanism in rice and the evolutionary genetics of plant adaptation to acid-soil conditions across cereal species.     

Haplotype analysis of QTLs attributed to salinity tolerance in wheat (Triticum aestivum)

A diverse collection of wheat germplasm, consisting of 100 bread wheat lines with varying levels of salinity tolerance were evaluated based on incomplete block design (lattice) with two replications in field conditions. Plant material was screened for salinity tolerance under normal and saline field conditions. Subsequently in order to assess the haplotype diversity of QTLs attributed to salinity tolerance in wheat (Triticum aestivum), a collection of 30 extremes tolerant and sensitive genotypes among them were selected for genotyping on the basis of morphological, physiological and phenological traits. Genotyping was done using microsatellite markers which had been detected as the flanking regions of large effect QTLs attributed to salinity tolerance on chromosomes 2A, 4D and 3B. Combined analysis of saline and normal conditions revealed that genotypes showed highly significant responses. Association analysis of SSR markers with traits, showed markers Xcfa2121b, Xgwm10 and Xgwm296 on chromosome 2A and markers Xgwm194 and xgwm624 for chromosome 4D, had significant association with most of measured traits. Haplotype diversity analysis showed markers Xgwm10, Xgwm445, Xbarc353.2, Xgwm312, Xgwm515 and Xwmc296 on chromosome 2A as well as markers Xwmc326 and Xgwm345, Xbarc48.4 on chromosomes 3B and 4D were identified as the best markers attributed to salinity tolerance and they can be informative markers for improvement of salinity tolerance through marker-assisted selection programs.     

Interval mapping of QTLs controlling yield-related traits and seed protein content in Pisum sativum

A linkage map of garden pea was constructed on the basis of 114 plants (F2 generation) derived from a cross combination Wt10245 x Wt11238. The map, consisting of 204 morphological, isozyme, AFLP, ISSR, STS, CAPS and RAPD markers, was used for interval mapping of quantitative trait loci (QTLs) controlling seed number, pod number, 1000-seed weight, 1000-yield, and seed protein content. Characterization of each QTL included identification of QTL position with reference to the flanking markers, estimation of the part of variance explained by this QTL, and determination of its gene action. The yield-related traits were measured in F2 plants and in F4 recombinant inbred lines (RILs). The interval mapping revealed two to six QTLs per trait, demonstrating linkage to seven pea chromosomes. A total of 37 detected QTLs accounted for 9.1-55.9% of the trait's phenotypic variation and showed different types of gene action. As many as eight and ten QTLs influencing the analysed traits were mapped in linkage groups III and V, respectively, indicating an important role of these regions of the pea genome in the control of yield and seed protein content.     

QTL mapping of domestication-related traits in soybean (Glycine max)

BACKGROUND AND AIMS: Understanding the genetic basis underlying domestication-related traits (DRTs) is important in order to use wild germplasm efficiently for improving yield, stress tolerance and quality of crops. This study was conducted to characterize the genetic basis of DRTs in soybean (Glycine max) using quantitative trait locus (QTL) mapping. METHODS: A population of 96 recombinant inbred lines derived from a cultivated (ssp. max) x wild (ssp. soja) cross was used for mapping and QTL analysis. Nine DRTs were examined in 2004 and 2005. A linkage map was constructed with 282 markers by the Kosambi function, and the QTL was detected by composite interval mapping. KEY RESULTS: The early flowering and determinate habit derived from the max parent were each controlled by one major QTL, corresponding to the major genes for maturity (e1) and determinate habit (dt1), respectively. There were only one or two significant QTLs for twinning habit, pod dehiscence, seed weight and hard seededness, which each accounted for approx. 20-50 % of the total variance. A comparison with the QTLs detected previously indicated that in pod dehiscence and hard seededness, at least one major QTL was common across different crosses, whereas no such consistent QTL existed for seed weight. CONCLUSIONS: Most of the DRTs in soybeans were conditioned by one or two major QTLs and a number of genotype-dependent minor QTLs. The common major QTLs identified in pod dehiscence and hard seededness may have been key loci in the domestication of soybean. The evolutionary changes toward larger seed may have occurred through the accumulation of minor changes at many QTLs. Since the major QTLs for DRTs were scattered across only six of the 20 linkage groups, and since the QTLs were not clustered, introgression of useful genes from wild to cultivated soybeans can be carried out without large obstacles.