Three-dimensional structure of ubiquinol: Cytochrome C reductase from Neurospora mitochondria determined by electron microscopy of membrane crystals

Membrane crystals have been prepared from mitochondrial ubiquinol: cytochrome c reductase by mixing the enzyme-Triton complex with phospholipid-Triton micelles and subsequently removing the Triton. The electron micrographs of the negatively stained crystals diffract to 2·5 nm, with unit cell dimensions of 13·7 nm by 17·4 nm. The enzyme is arranged in a two-sided plane group P22₁2₁, i.e. alternate molecules span the bilayer in an up and down manner. By combining tilted views of the membrane crystals, a low-resolution three-dimensional structure of the enzyme has been calculated. The structure shows that the enzyme is a dimer, the monomers being related by a 2-fold axis running perpendicular to the membrane. The monomeric units of the enzyme are elongated, extending approximately 15 nm across the membrane. The protein is unequally distributed with about 30% of the total mass located in the bilayer, 50% in a section which extends 7 nm from one side of the bilayer and 20% in a section which extends 3 nm from the opposite side of the bilayer. The two monomeric units are in contact only in the membraneous section. This structure is compared with a model of the enzyme which is derived from biochemical properties of the isolated subunits.     

Dimer ribbons in the three-dimensional structure of sarcoplasmic reticulum

The three-dimensional structure of scallop sarcoplasmic reticulum membranes has been determined from electron micrographs of two classes of stain-filled tubules by helical reconstruction methods. These structures are characterized by dimer ribbons of Ca2+-ATPase molecules running diagonally around the tube wall. Deep right-handed grooves separate the ribbons. The elongated, curved units of the dimer (approximately 95 A long in the radial direction; 60 to 70 A axially, and about 30 A wide) are displaced axially by approximately 34 A and are connected at their outer ends by a bridge running nearly parallel to the tube axis. The monomers make a second contact at their inner ends. Adjacent units with the same orientation form a strong contact that is responsible for the ribbon appearance. Comparison of tubules of different diameter shows that one set of connections between the dimer ribbons is conserved: the inner ends of axially displaced dimers appear to make contact along a left-handed path almost perpendicular to the major grooves. The lipid bilayer cannot be clearly identified. The two-dimensional map obtained from flattened tubules is consistent with the three-dimensional reconstruction in showing dimer ribbons connected by a weak contact across the grooves, strongly resembling the inter-dimer bond observed in three dimensions. The two-dimensional map shows a 2-fold axis relating units of the dimer, but the three-dimensional tubes show a slight axial polarity that may arise from the presence of proteins other than the Ca2+-ATPase.     

Three-dimensional reconstruction of negatively stained crystals of the Ca2+-ATPase from muscle sarcoplasmic reticulum

The structure of the Ca2+ transport ATPase from rabbit skeletal muscle sarcoplasmic reticulum has been determined to 25 A resolution by three-dimensional image reconstruction of crystalline membrane tubules induced through exposure to Na3VO4 and preserved for electron microscopy in negative stain. The crystalline arrays have projection symmetry p2 and consist of chains of Ca2+-ATPase dimers arranged in a right-handed helix. The density map shows protein features that project from the membrane surface into the cytoplasm. The luminal side of the membrane tubules is featureless, presumably because very little of the Ca2+-ATPase molecule projects into the luminal space. The cytoplasmic region of the Ca2+-ATPase molecule is pear-shaped, with a lobe oriented nearly parallel to the axis of the dimer ribbons, about 16 A above the surface of the membrane bilayer. The structure seen in the maps has a volume of 71,000 A3, corresponding to a molecular weight of 57,000. The two Ca2+-ATPase profiles that constitute a dimer are connected by a stain-excluding bridge that is oriented parallel with the axis of the tubule at a height of about 42 A above the surface of the bilayer.     

Three-dimensional structure of NADH: ubiquinone reductase (complex I) from Neurospora mitochondria determined by electron microscopy of membrane crystals

NADH: ubiquinone reductase (electron transfer complex I) has been isolated from Neurospora crassa mitochondria as a monodisperse protein-phospholipid-Triton X-100 complex (1:0.04:0.15, by weight). The enzyme is in the monomeric state, has a protein molecular weight of 610,000 and consists of about 25 different subunits. Membrane crystals of the enzyme complex have been prepared by adding mixed phospholipid-Triton X-100 micelles and then removing the Triton by dialysis. Diffraction patterns of the negatively stained membrane crystals extend to about 3.9 nm, with a unit cell size of 19 nm X 38 nm and gamma = 90 degrees. The two-sided plane group packing corresponding to pgg is p22(1)2(1). By combining four sets of tilted views, a low-resolution three-dimensional structure of the protein has been calculated. The structure shows that NADH: ubiquinone reductase extends 15 nm across the membrane, projecting 9 nm from one membrane side and 1 nm from the opposite side. Only about one-third of the total protein mass is located in the membrane. The structure of NADH: ubiquinone reductase is compared with that of ubiquinol: cytochrome c reductase determined by electron microscopy of membrane crystals.     

Roles of Amphipathic Helices and the Bin/Amphiphysin/Rvs (BAR) Domain of Endophilin in Membrane Curvature Generation

Control of membrane curvature is required in many important cellular processes, including endocytosis and vesicular trafficking. Endophilin is a bin/amphiphysin/rvs (BAR) domain protein that induces vesicle formation by promotion of membrane curvature through membrane binding as a dimer. Using site-directed spin labeling and EPR spectroscopy, we show that the overall BAR domain structure of the rat endophilin A1 dimer determined crystallographically is maintained under predominantly vesiculating conditions. Spin-labeled side chains on the concave surface of the BAR domain do not penetrate into the acyl chain interior, indicating that the BAR domain interacts only peripherally with the surface of a curved bilayer. Using a combination of EPR data and computational refinement, we determined the structure of residues 63–86, a region that is disordered in the crystal structure of rat endophilin A1. Upon membrane binding, residues 63–75 in each subunit of the endophilin dimer form a slightly tilted, amphipathic α-helix that directly interacts with the membrane. In their predominant conformation, these helices are located orthogonal to the long axis of the BAR domain. In this conformation, the amphipathic helices are positioned to act as molecular wedges that induce membrane curvature along the concave surface of the BAR domain.     

Dimer ribbons of ATP synthase shape the inner mitochondrial membrane

ATP synthase converts the electrochemical potential at the inner mitochondrial membrane into chemical energy, producing the ATP that powers the cell. Using electron cryo-tomography we show that the ATP synthase of mammalian mitochondria is arranged in long approximately 1-microm rows of dimeric supercomplexes, located at the apex of cristae membranes. The dimer ribbons enforce a strong local curvature on the membrane with a 17-nm outer radius. Calculations of the electrostatic field strength indicate a significant increase in charge density, and thus in the local pH gradient of approximately 0.5 units in regions of high membrane curvature. We conclude that the mitochondrial cristae act as proton traps, and that the proton sink of the ATP synthase at the apex of the compartment favours effective ATP synthesis under proton-limited conditions. We propose that the mitochondrial ATP synthase organises itself into dimer ribbons to optimise its own performance.     

The projection structure of EmrE, a proton-linked multidrug transporter from Escherichia coli, at 7 A resolution

EmrE belongs to a family of eubacterial multidrug transporters that confer resistance to a wide variety of toxins by coupling the influx of protons to toxin extrusion. EmrE was purified and crystallized in two dimensions by reconstitution with dimyristoylphosphatidylcholine into lipid bilayers. Images of frozen hydrated crystals were collected by cryo-electron microscopy and a projection structure of EmrE was calculated to 7 A resolution. The projection map shows an asymmetric EmrE dimer with overall dimensions approximately 31 x 40 A, comprising an arc of highly tilted helices separating two helices nearly perpendicular to the membrane from another two helices, one tilted and the other nearly perpendicular. There is no obvious 2-fold symmetry axis perpendicular to the membrane within the dimer, suggesting that the monomers may have different structures in the functional unit.     

The structure of the Ca2+ ATPase as revealed by electron microscopy and image processing of ordered arrays

Two-dimensional ordered arrays of the membrane-bound Ca2+ ATPase, were formed over a wide range of conditions (i.e., pH, ionic strength, temperature) in the presence of vanadate, and studied by electron microscopy and image processing. These ordered tubular and spherical membrane vesicles of Ca2+ ATPase could also be formed with approximately one bound ATP and between one and two nonchelatable Ca2+ bound. The tubular arrays ranged between 1 and 10 microns in length and had an average flattened diameter of 90 nm, as observed in negatively stained preparations. The basic building blocks of these ordered arrays appear to be linear ribbons of Ca2+ ATPase dimers. Fourier analysis of electron micrographs of these flattened tubes revealed a near-rectangular lattice (lattice angle 73.3 +/- 4.6 degrees with average lattice constants of a = 6.2 +/- 0.25 nm, and b = 11.5 +/- 0.30 nm). The double-stranded ribbons (i.e., parallel to a) are inclined by 56 +/- 3.7 degrees relative to the tube axis in a right-handed sense, as determined from freeze-dried metal-shadowed specimens. Computer averaging of negatively stained arrays reveals a crystallographic dimer of stain-excluding matter. The dimensions of each monomer within this dimer are consistent with established structural parameters, leading us to believe a form of the Ca2+ ATPase, capable of binding at least one ATP and of binding Ca2+ ions, may exist as a dimer in the sarcoplasmic reticulum.     

Three-dimensional structure of a regular surface layer from Pseudomonas acidovorans

The regular surface layer of Pseudomonas acidovorans was investigated by computer processing of a series of tilted view electron micrographs, and a reconstruction of the three-dimensional structure was obtained. The pattern is tetragonal and consists of massive identical subunits, block-like in face-view, which interlock loosely in a simple cobblestone pattern. The square unit cell has a lattice constant of 11 nm. The surface layer pattern of P. acidovorans appears to be more dependent on the underlying membrane for maintaining its integrity than those so far studied in other bacteria.     

Low resolution structure of bovine rhodopsin determined by electron cryo-microscopy.

The visual pigment rhodopsin is a member of the G protein-coupled receptor family. Electron cryo-microscopy was used to determine the three-dimensional structure of bovine rhodopsin from tilted two-dimensional crystals embedded in vitrified water. The effective resolution in a map obtained from the 23 best crystals was about 9.5 A horizontally and approximately 47 A normal to the plane of the membrane. Four clearly resolved tracks of density in the map correspond to four alpha-helices oriented nearly perpendicular to the plane of the membrane. One of these helices appears to be more tilted than anticipated from the projection structure published previously. The remaining three helices are presumably more highly tilted, given that they form a continuous "arc-shaped" feature and could not be resolved to the same extent. The overall density distribution in the low resolution map shows an arrangement of the helices in which the "arc-shaped" feature is extended by a fourth, less tilted helix. The band of these four tilted helices is flanked by a straight helix on the outer side and a pair of straight helices on its inner side.     

Analysis of the three-dimensional structure of the urinary bladder epithelial cell membranes

The three-dimensional structure of the luminal membrane of the mammalian urinary bladder has been determined using electron micrographs of tilted membranes preserved in neutralized potassium phosphotungstate stain. The density map consists of 12 stain-excluding regions, 57 A thick, that are organized as an inner ring of 6 and an outer ring of 6, plus a small stain-excluding feature directly on the sixfold axis. Only the luminal surface of the membrane can be observed suggesting that at the resolution of the reconstruction the cytoplasmic surface is smooth.     

Three-dimensional structure of T3 connector purified from overexpressing bacteria.

The bacteriophage T3 connector has been purified from overexpressed protein in Escherichia coli, harboring a plasmid containing the gene encoding p8 protein. The connector, which is composed of 12 copies of p8, has been crystallized in two-dimensional sheets and studied by electron microscopy from negatively stained specimens. A two-dimensional Fourier filtering and averaging procedure was performed with crystalline specimens. In addition, single particle averaging techniques were used with other preparations. The average images obtained from these two approaches gave similar results. A three-dimensional reconstruction from two-dimensional crystals of T3 connectors was obtained by collecting several sets of tilted views and using standard Fourier procedures. The resolution of the three-dimensional map was 1.65 nm. The reconstructed connector shows two main domains: a wider one with 12 small units in the periphery and with an external diameter of 14.9 nm, and a smaller one with 8.5 nm diameter. The height of the reconstructed connector has been determined to be around 8.5 nm. The reconstruction clearly shows an internal open channel running along the longitudinal axis of the particle and having an average diameter of 3.7 nm.     

Orientation of the pigments in Photosystem II: A low-temperature linear dichroism and polarized fluorescence emission study of chlorophyll-protein complexes isolated from Chlamydomonas reinhardtii

The orientation of the various absorbing and fluorescing dipoles in Photosystem II have been investigated by linearly polarized light spectroscopy at 5 K, performed on macroscopically oriented PS II complexes derived from Chlamydomonas reinhardtii. Linear dichroism and absorption spectra show that the Q_Y transitions of the chlorophyll molecules are mostly tilted at less than 35° from the plane of largest cross-section of the particle (which in vivo coincides with the plane of the thylakoid membrane). The chlorophyll forms absorbing at 676 and 683 nm are oriented closer to the membrane than the forms absorbing at 665 and 670 nm which are tilted at approximately 35° from the plane. A dip observed around 680 nm in the LD/absorption spectra indicates a component tilted at a larger angle away from the membrane plane than the 676 nm- and 683 nm-absorbing species. A component weakly absorbing around 693 nm and exhibiting a negative LD (tilt larger than 35°) is clearly resolved. The amplitude of the LD at 693 nm relative to that observed at the maximum (676 nm) varies from sample to sample. In the blue spectral region, two populations of carotenoids are observed; one absorbs around 460 and 490 nm, while the other absorbs around 510 nm. They are oriented out of and near to the thylakoid plane, respectively. Comparison of polarized absorption and fluorescence spectra from the same oriented samples allows the assignment of the 695 nm fluorescence emission to the dipoles responsible for the LD signal at 693 nm.     

The Phospholamban Pentamer Alters Function of the Sarcoplasmic Reticulum Calcium Pump SERCA

The interaction of phospholamban (PLN) with the sarco-endoplasmic reticulum Ca²⁺-ATPase (SERCA) pump is a major regulatory axis in cardiac muscle contractility. The prevailing model involves reversible inhibition of SERCA by monomeric PLN and storage of PLN as an inactive pentamer. However, this paradigm has been challenged by studies demonstrating that PLN remains associated with SERCA and that the PLN pentamer is required for the regulation of cardiac contractility. We have previously used two-dimensional (2D) crystallization and electron microscopy to study the interaction between SERCA and PLN. To further understand this interaction, we compared small helical crystals and large 2D crystals of SERCA in the absence and presence of PLN. In both crystal forms, SERCA molecules are organized into identical antiparallel dimer ribbons. The dimer ribbons pack together with distinct crystal contacts in the helical versus large 2D crystals, which allow PLN differential access to potential sites of interaction with SERCA. Nonetheless, we show that a PLN oligomer interacts with SERCA in a similar manner in both crystal forms. In the 2D crystals, a PLN pentamer interacts with transmembrane segments M3 of SERCA and participates in a crystal contact that bridges neighboring SERCA dimer ribbons. In the helical crystals, an oligomeric form of PLN also interacts with M3 of SERCA, though the PLN oligomer straddles a SERCA-SERCA crystal contact. We conclude that the pentameric form of PLN interacts with M3 of SERCA and that it plays a distinct structural and functional role in SERCA regulation. The interaction of the pentamer places the cytoplasmic domains of PLN at the membrane surface proximal to the calcium entry funnel of SERCA. This interaction may cause localized perturbation of the membrane bilayer as a mechanism for increasing the turnover rate of SERCA.     

Three-dimensional structure of bovine NADH:ubiquinone oxidoreductase of the mitochondrial respiratory chain

We have studied the structure of bovine heart mitochondrial NADH:ubiquinone (Q) oxidoreductase (EC 1.6.99.3) by image analysis of electron micrographs. A three-dimensional reconstruction was calculated from a tilt-series of a two-dimensional crystal of the molecule. Our interpretation of the position of the molecule in the unit cell of the crystal is supported by additional (low-resolution) analysis of images of single molecules. The three-dimensional reconstruction was calculated with the aid of an iterative real-space reconstruction algorithm. The various projections used as input to the algorithm were obtained by averaging the images of the tilted crystal through a Fourier-space peak-filtering procedure. The reconstructed unit cell measures 15.2 X 15.2 nm in the plane of the two-dimensional crystal and has a height of 10-11 nm. The unit cell contains one molecule consisting of four large subunits. At the present resolution of about 1.3 nm in the untilted projection, these four monomers are seen as two dimers related by a two-fold axis. Two views of the single particles have been recognized; they are the top and side view of the building block of the crystal. After computer image alignment and correspondence analysis, clusters of similar particles have been averaged. In the averages an uneven stain distribution is seen around the molecules, which may result from preferential staining of hydrophilic parts of the molecule. The molecular mass of the whole molecule was determined from scanning transmission electron microscopy measurements as (1.6 +/- 0.2) X 10(6) daltons.     

The three-dimensional structure of the nemaline rod Z-band

In nemaline myopathy and some cardiac muscles, the Z-band becomes greatly enlarged and contains multiple layers of a zigzag structure similar to that seen in normal muscle. Because of the additional periodicity in the direction of the filament axis, these structures are particularly favorable for three-dimensional analysis since it becomes possible to average the data in all three dimensions and thus improve the reliability of the reconstruction. Individual views of the structure corresponding to tilted longitudinal and transverse sections were combined by matching the phases of common reflections. Examination of the tilted views strongly suggested that to the available resolution, the structure possesses fourfold screw symmetry along the actin filament axes. This symmetry could be used both in establishing the correct alignment for the combination of individual tilted views and to generate additional views not readily accessible in a single tilt series. The reconstruction shows actin filaments from one sarcomere surrounded by an array of four actin filaments with opposite polarity from the adjacent sacormere. The actin filaments show a right- handed twist and are connected by a structure that links adjacent filaments with the same polarity at the same axial level, then runs parallel to the filaments, and finally forms a link between two actin filaments whose polarity is opposite to that of the first pair. The connecting structure is probably composed of alpha-actinin which is located in Z-bands and cross-links actin filaments. The connecting structure may consist of two alpha-actinin molecules linking actin filaments of opposite polarity.     

Three-dimensional map of the dimeric membrane domain of the human erythrocyte anion exchanger, Band 3.

The electroneutral exchange of chloride and bicarbonate across the human erythrocyte membrane is facilitated by Band 3, a 911 amino acid glycoprotein consisting of a 43 kDa N-terminal cytosolic domain that binds the cytoskeleton, haemoglobin and glycolytic enzymes and a 52 kDa C-terminal membrane domain that mediates anion transport. Electron microscopy and three-dimensional image reconstruction of negatively stained two-dimensional crystals of the dimeric membrane domain revealed a U-shaped structure with dimensions of 60 x 110 A, and a thickness of 80 A. The structure is open on the top and at the sides, with the monomers in close contact at the base. The basal domain is 40 A thick and probably spans the lipid bilayer. The upper part of the dimer consists of two elongated protrusions measuring 25 x 80 A in projection, with a thickness of 40 A. The protrusions form the sides of a canyon, enclosing a wide space that narrows down and converges into a depression at the centre of the dimer on the top of the basal domain. This depression may represent the opening to a transport channel located at the dimer interface. Based on the available protein-chemical data, the two protrusions face the cytosolic side of the membrane and they appear to be dynamic.     

The marine algal virus PpV01 has an icosahedral capsid with T=219 quasisymmetry

Phaeocystis pouchetii virus (PpV01) infects and lyses the haptophyte Phaeocystis pouchetii (Hariot) Lagerheim and was first isolated from Norwegian coastal waters. We have used electron cryomicroscopy and three-dimensional image reconstruction methods to examine the native morphology of PpV01 at a resolution of 3 nm. The icosahedral capsid of PpV01 has a maximum diameter of 220 nm and is composed of 2,192 capsomers arranged with T=219 quasisymmetry. One specific capsomer in each asymmetric unit contains a fiber-like protrusion. Density attributed to the presence of a lipid membrane appears just below (inside) the capsid. PpV01 is the largest icosahedral virus whose capsid structure has been determined in three dimensions from images of vitrified samples. Striking similarities in the structures of PpV01 and a number of other large double-stranded DNA viruses are consistent with a growing body of evidence that they share a common evolutionary origin.     

Three-dimensional electron diffraction of PhoE porin to 2.8 A resolution

A three-dimensional set of electron diffraction intensities of PhoE porin embedded in trehalose extending to 2.8 A resolution has been collected and analyzed. The strongest high-resolution intensities are distributed as a figure of revolution about the z*-axis and are located primarily in a resolution range of 4.5 A to 5.0 A. Within this region, centered near 4.8 A resolution the brightest intensities are clustered about inclination angles of 35 degrees and 0 degrees from the a*, b* plane. This distribution of intensities indicates that the beta-sheet in PhoE porin is arranged to form a cylinder-like structure that contains major populations of beta-sheet strands tilted an average of 35 degrees and 0 degrees with respect to the membrane plane normal. This cylindrical structure has been seen previously in the high-resolution projection map of PhoE as an elliptical ring of high density.