Architecture of a Nascent Sphingomonas sp. Biofilm under Varied Hydrodynamic Conditions

The architecture of a Sphingomonas biofilm was studied during early phases of its formation, using strain L138, a gfp-tagged derivative of Sphingomonas sp. strain LB126, as a model organism and flow cells and confocal laser scanning microscopy as experimental tools. Spatial and temporal distribution of cells and exopolymer secretions (EPS) within the biofilm, development of microcolonies under flow conditions representing varied Reynolds numbers, and changes in diffusion length with reference to EPS production were studied by sequential sacrificing of biofilms grown in multichannel flow cells and by time-lapse confocal imaging. The area of biofilm in terms of microscopic images required to ensure representative sampling varied by an order of magnitude when area of cell coverage (2 × 10⁵ μm²) or microcolony size (1 × 10⁶ μm²) was the biofilm parameter under investigation. Hence, it is necessary to establish the inherent variability of any biofilm metric one is attempting to quantify. Sphingomonas sp. strain L138 biofilm architecture consisted of microcolonies and extensive water channels. Biomass and EPS distribution were maximal at 8 to 9 μm above the substratum, with a high void fraction near the substratum. Time-lapse confocal imaging and digital image analysis showed that growth of the microcolonies was not uniform: adjacently located colonies registered significant growth or no growth at all. Microcolonies in the biofilm had the ability to move across the attachment surface as a unit, irrespective of fluid flow direction, indicating that movement of microcolonies is an inherent property of the biofilm. Width of water channels decreased as EPS production increased, resulting in increased diffusion distances in the biofilm. Changing hydrodynamic conditions (Reynolds numbers of 0.07, 52, and 87) had no discernible influence on the characteristics of microcolonies (size, shape, or orientation with respect to flow) during the first 24 h of biofilm development. Inherent factors appear to have overriding influence, vis-à-vis environmental factors, on early stages of microcolony development under these laminar flow conditions.     

L-Arginine Destabilizes Oral Multi-Species Biofilm Communities Developed in Human Saliva

The amino acid L-arginine inhibits bacterial coaggregation, is involved in cell-cell signaling, and alters bacterial metabolism in a broad range of species present in the human oral cavity. Given the range of effects of L-arginine on bacteria, we hypothesized that L-arginine might alter multi-species oral biofilm development and cause developed multi-species biofilms to disassemble. Because of these potential biofilm-destabilizing effects, we also hypothesized that L-arginine might enhance the efficacy of antimicrobials that normally cannot rapidly penetrate biofilms. A static microplate biofilm system and a controlled-flow microfluidic system were used to develop multi-species oral biofilms derived from pooled unfiltered cell-containing saliva (CCS) in pooled filter-sterilized cell-free saliva (CFS) at 37^oC. The addition of pH neutral L-arginine monohydrochloride (LAHCl) to CFS was found to exert negligible antimicrobial effects but significantly altered biofilm architecture in a concentration-dependent manner. Under controlled flow, the biovolume of biofilms (μm³/μm²) developed in saliva containing 100-500 mM LAHCl were up to two orders of magnitude less than when developed without LAHCI. Culture-independent community analysis demonstrated that 500 mM LAHCl substantially altered biofilm species composition: the proportion of Streptococcus and Veillonella species increased and the proportion of Gram-negative bacteria such as Neisseria and Aggregatibacter species was reduced. Adding LAHCl to pre-formed biofilms also reduced biovolume, presumably by altering cell-cell interactions and causing cell detachment. Furthermore, supplementing 0.01% cetylpyridinium chloride (CPC), an antimicrobial commonly used for the treatment of dental plaque, with 500 mM LAHCl resulted in greater penetration of CPC into the biofilms and significantly greater killing compared to a non-supplemented 0.01% CPC solution. Collectively, this work demonstrates that LAHCl moderates multi-species oral biofilm development and community composition and enhances the activity of CPC. The incorporation of LAHCl into oral healthcare products may be useful for enhanced biofilm control.     

Chromosomal Gene Inactivation in the Green Sulfur Bacterium Chlorobium tepidum by Natural Transformation

Conditions for inactivating chromosomal genes of Chlorobium tepidum by natural transformation and homologous recombination were established. As a model, mutants unable to perform nitrogen fixation were constructed by interrupting nifD with various antibiotic resistance markers. Growth of wild-type C. tepidum at 40°C on agar plates could be completely inhibited by 100 μg of gentamicin ml⁻¹, 2 μg of erythromycin ml⁻¹, 30 μg of chloramphenicol ml⁻¹, or 1 μg of tetracycline ml⁻¹ or a combination of 300 μg of streptomycin ml⁻¹ and 150 μg of spectinomycin ml⁻¹. Transformation was performed by spotting cells and DNA on an agar plate for 10 to 20 h. Transformation frequencies on the order of 10⁻⁷ were observed with gentamicin and erythromycin markers, and transformation frequencies on the order of 10⁻³ were observed with a streptomycin-spectinomycin marker. The frequency of spontaneous mutants resistant to gentamicin, erythromycin, or spectinomycin-streptomycin was undetectable or significantly lower than the transformation frequency. Transformation with the gentamicin marker was observed when the transforming DNA contained 1 or 3 kb of total homologous flanking sequence but not when the transforming DNA contained only 0.3 kb of homologous sequence. Linearized plasmids transformed at least an order of magnitude better than circular plasmids. This work forms a foundation for the systematic targeted inactivation of genes in C. tepidum, whose 2.15-Mb genome has recently been completely sequenced.     

Annual Cycle of Bacterial Specific Biovolumes in Howe Sound, a Canadian West Coast Fjord Sound

The mean specific biovolumes (biovolume cell⁻¹) of the bacterioplankton within a 250-m-deep water column in Howe Sound, British Columbia, were determined for the period of 4 September 1984 to 23 October 1985. These bacteria had an annual cycle in mean specific biovolume; they were small (ca. 0.058 μm³) in mid-winter, larger in spring (ca. 0.076 μm³), larger again in summer (up to 0.102 μm³), and largest (ca. 0.133 μm³) in early fall (immediately after the decrease in phytoplankton production). The mean specific biovolumes changed coincidently through the water column with time, although the larger bacterioplankton tended to occur in the surface and deepest water. Although the mean specific biovolumes correlated better with in situ temperature (r = 0.65, a = 0.01) than with in situ chlorophyll a concentration (r = 0.34, a = 0.25), modeling experiments with batch cultures of the dinoflagellate Prorocentrum minimum (Pavillard) and the green alga Dunaliella tertiolecta (Butcher) indicated that the biomass and physiological condition of the phytoplankters may be more important than temperature in determining these bacterial specific biovolumes.     

Effects of Light on the Microcystin Content of Microcystis Strain PCC 7806

Many cyanobacteria produce microcystins, hepatotoxic cyclic heptapeptides that can affect animals and humans. The effects of photosynthetically active radiation (PAR) on microcystin production by Microcystis strain PCC 7806 were studied in continuous cultures. Microcystis strain PCC 7806 was grown under PAR intensities between 10 and 403 μmol of photons m⁻² s⁻¹ on a light-dark rhythm of 12 h -12 h. The microcystin concentration per cell, per unit biovolume and protein, was estimated under steady-state and transient-state conditions and on a diurnal timescale. The cellular microcystin content varied between 34.5 and 81.4 fg cell⁻¹ and was significantly positively correlated with growth rate under PAR-limited growth but not under PAR-saturated growth. Microcystin production and PAR showed a significant positive correlation under PAR-limited growth and a significant negative correlation under PAR-saturated growth. The microcystin concentration, as a ratio with respect to biovolume and protein, correlated neither with growth rate nor with PAR. Adaptation of microcystin production to a higher irradiance during transient states lasted for 5 days. During the period of illumination at a PAR of 10 and 40 μmol of photons m⁻² s⁻¹, the intracellular microcystin content increased to values 10 to 20% higher than those at the end of the dark period. Extracellular (dissolved) microcystin concentrations were 20 times higher at 40 μmol of photons m⁻² s⁻¹ than at 10 μmol of photons m⁻² s⁻¹ and did not change significantly during the light-dark cycles at both irradiances. In summary, our results showed a positive effect of PAR on microcystin production and content of Microcystis strain PCC 7806 up to the point where the maximum growth rate is reached, while at higher irradiances the microcystin production is inhibited.     

A Simple and Rapid Method for Genetic Transformation of Lactic Streptococci by Electroporation

An electroporation procedure for the plasmid-mediated genetic transformation of intact cells of Streptococcus cremoris and Streptococcus lactis was performed. Ten different strains were transformed. The method was simple and rapid and yielded transformant colonies in 14 to 24 h. The method was optimized for S. lactis LM0230, and transformation frequencies of between 1 × 10⁴ and 5 × 10⁵ transformants per μg of purified plasmid (pMU1328) were achieved routinely. The optimized procedure involved lysozyme treatment of cells. Transformation of LM0230 occurred at comparable frequencies with pLS1 (4.4 kilobase pair [kbp]), pMU1328 (7.4 kbp), and pAMβ1 (26.5 kbp). Plasmid DNA isolated from transformants had not undergone detectable deletions or rearrangements. Transformation was possible with plasmid DNA which was religated after restriction endonuclease digestion. Phage DNA-dependent transfection of S. lactis LM0230 and S. lactis C6 was also achieved.     

Determination of Bacterial Cell Dry Mass by Transmission Electron Microscopy and Densitometric Image Analysis

We applied transmission electron microscopy and densitometric image analysis to measure the cell volume (V) and dry weight (DW) of single bacterial cells. The system was applied to measure the DW of Escherichia coli DSM 613 at different growth phases and of natural bacterial assemblages of two lakes, Piburger See and Gossenköllesee. We found a functional allometric relationship between DW (in femtograms) and V (in cubic micrometers) of bacteria (DW = 435 · V^0.86); i.e., smaller bacteria had a higher ratio of DW to V than larger cells. The measured DW of E. coli cells ranged from 83 to 1,172 fg, and V ranged from 0.1 to 3.5 μm³ (n = 678). Bacterial cells from Piburger See and Gossenköllesee (n = 465) had DWs from 3 fg (V = 0.003 μm³) to 1,177 fg (V = 3.5 μm³). Between 40 and 50% of the cells had a DW of less than 20 fg. By assuming that carbon comprises 50% of the DW, the ratio of carbon content to V of individual cells varied from 466 fg of C μm⁻³ for Vs of 0.001 to 0.01 μm³ to 397 fg of C μm⁻³ (0.01 to 0.1 μm³) and 288 fg of C μm⁻³ (0.1 to 1 μm³). Exponentially growing and stationary cells of E. coli DSM 613 showed conversion factors of 254 fg of C μm⁻³ (0.1 to 1 μm³) and 211 fg of C μm⁻³ (1 to 4 μm³), respectively. Our data suggest that bacterial biomass in aquatic environments is higher and more variable than previously assumed from volume-based measurements.     

Biofilm Cohesiveness Measurement Using a Novel Atomic Force Microscopy Methodology

Biofilms can be undesirable, as in those covering medical implants, and beneficial, such as when they are used for waste treatment. Because cohesive strength is a primary factor affecting the balance between growth and detachment, its quantification is essential in understanding, predicting, and modeling biofilm development. In this study, we developed a novel atomic force microscopy (AFM) method for reproducibly measuring, in situ, the cohesive energy levels of moist 1-day biofilms. The biofilm was grown from an undefined mixed culture taken from activated sludge. The volume of biofilm displaced and the corresponding frictional energy dissipated were determined as a function of biofilm depth, resulting in the calculation of the cohesive energy. Our results showed that cohesive energy increased with biofilm depth, from 0.10 ± 0.07 nJ/μm³ to 2.05 ± 0.62 nJ/μm³. This observation was reproducible, with four different biofilms showing the same behavior. Cohesive energy also increased from 0.10 ± 0.07 nJ/μm³ to 1.98 ± 0.34 nJ/μm³ when calcium (10 mM) was added to the reactor during biofilm cultivation. These results agree with previous reports on calcium increasing the cohesiveness of biofilms. This AFM-based technique can be performed with available off-the-shelf instrumentation. It could therefore be widely used to examine biofilm cohesion under a variety of conditions.     

Estimating the Growth Rate of Slowly Growing Marine Bacteria from RNA Content

In past studies of enteric bacteria such as Escherichia coli, various measures of cellular RNA content have been shown to be strongly correlated with growth rate. We examined this correlation for four marine bacterial isolates. Isolates were grown in chemostats at four or five dilution rates, yielding growth rates that spanned the range typically determined for marine bacterial communities in nature (μ = 0.01 to 0.25 h^-1). All measures of RNA content (RNA cell^-1, RNA:biovolume ratio, RNA:DNA ratio, RNA:DNA:biovolume ratio) were significantly different among isolates. Normalizing RNA content to cell volume substantially reduced, but did not eliminate, these differences. On average, the correlation between μ and the RNA:DNA ratio accounted for 94% of variance when isolates were considered individually. For data pooled across isolates (analogous to an average measurement for a community), the ratio of RNA:DNA μm^-3 (cell volume) accounted for nearly half of variance in μ (r² = 0.47). The maximum RNA:DNA ratio for each isolate was extrapolated from regressions. The regression of (RNA:DNA)/(RNA:DNA)_max on μ was highly significant (r² = 0.76 for data pooled across four isolates) and virtually identical for three of the four isolates, perhaps reflecting an underlying common relationship between RNA content and growth rate. The dissimilar isolate was the only one derived from sediment. Cellular RNA content is likely to be a useful predictor of growth rate for slowly growing marine bacteria but in practice may be most successful when applied at the level of individual species.     

Efficient Transformation System for Propionibacterium freudenreichii Based on a Novel Vector

A 3.6-kb endogenous plasmid was isolated from a Propionibacterium freudenreichii strain and sequenced completely. Based on homologies with plasmids from other bacteria, notably a plasmid from Mycobacterium, a region harboring putative replicative functions was defined. Outside this region two restriction enzyme recognition sites were used for insertion of an Escherichia coli-specific replicon and an erythromycin resistance gene for selection in Propionibacterium. Hybrid vectors obtained in this way replicated in both E. coli and P. freudenreichii. Whereas electroporation of P. freudenreichii with vector DNA isolated from an E. coli transformant yielded 10 to 30 colonies per μg of DNA, use of vector DNA reisolated from a Propionibacterium transformant dramatically increased the efficiency of transformation (≥10⁸ colonies per μg of DNA). It could be shown that restriction-modification was responsible for this effect. The high efficiency of the system described here permitted successful transformation of Propionibacterium with DNA ligation mixtures.     

Successional Development of Sulfate-Reducing Bacterial Populations and Their Activities in a Wastewater Biofilm Growing under Microaerophilic Conditions

A combination of fluorescence in situ hybridization, microprofiles, denaturing gradient gel electrophoresis of PCR-amplified 16S ribosomal DNA fragments, and 16S rRNA gene cloning analysis was applied to investigate successional development of sulfate-reducing bacteria (SRB) community structure and in situ sulfide production activity within a biofilm growing under microaerophilic conditions (dissolved oxygen concentration in the bulk liquid was in the range of 0 to 100 μM) and in the presence of nitrate. Microelectrode measurements showed that oxygen penetrated 200 μm from the surface during all stages of biofilm development. The first sulfide production of 0.32 μmol of H₂S m⁻² s⁻¹ was detected below ca. 500 μm in the 3rd week and then gradually increased to 0.70 μmol H₂S m⁻² s⁻¹ in the 8th week. The most active sulfide production zone moved upward to the oxic-anoxic interface and intensified with time. This result coincided with an increase in SRB populations in the surface layer of the biofilm. The numbers of the probe SRB385- and 660-hybridized SRB populations significantly increased to 7.9 × 10⁹ cells cm⁻³ and 3.6 × 10⁹ cells cm⁻³, respectively, in the surface 400 μm during an 8-week cultivation, while those populations were relatively unchanged in the deeper part of the biofilm, probably due to substrate transport limitation. Based on 16S rRNA gene cloning analysis data, clone sequences that related to Desulfomicrobium hypogeium (99% sequence similarity) and Desulfobulbus elongatus (95% sequence similarity) were most frequently found. Different molecular analyses confirmed that Desulfobulbus, Desulfovibrio, and Desulfomicrobium were found to be the numerically important members of SRB in this wastewater biofilm.     

Bacterial Biovolume and Biomass Estimations

The biomass of bacterial populations in aquatic ecosystems is often estimated by measuring bacterial biovolume and converting this into biomass in terms of carbon. A reliable conversion factor relating the measured bacterial biovolume to bacterial carbon content is essential for this approach. Based on direct measurements of bacterial cell carbon content, cell number, and biovolume, I have derived an average conversion factor of 5.6 × 10⁻¹³ g of C μm⁻³. This conversion factor is 3.4 to 6.6 times higher than most theoretically derived factors currently in use. Both bacterial biomass and bacterial production in aquatic ecosystems may thus have been seriously underestimated.     

Cranberry Flavonoids Modulate Cariogenic Properties of Mixed-Species Biofilm through Exopolysaccharides-Matrix Disruption

The exopolysaccharides (EPS) produced by Streptococcus mutans-derived glucosyltransferases (Gtfs) are essential virulence factors associated with the initiation of cariogenic biofilms. EPS forms the core of the biofilm matrix-scaffold, providing mechanical stability while facilitating the creation of localized acidic microenvironments. Cranberry flavonoids, such as A-type proanthocyanidins (PACs) and myricetin, have been shown to inhibit the activity of Gtfs and EPS-mediated bacterial adhesion without killing the organisms. Here, we investigated whether a combination of cranberry flavonoids disrupts EPS accumulation and S. mutans survival using a mixed-species biofilm model under cariogenic conditions. We also assessed the impact of cranberry flavonoids on mechanical stability and the in situ pH at the biofilm-apatite interface. Topical application of an optimized combination of PACs oligomers (100–300 μM) with myricetin (2 mM) twice daily was used to simulate treatment regimen experienced clinically. Treatments with cranberry flavonoids effectively reduced the insoluble EPS content (>80% reduction vs. vehicle-control; p<0.001), while hindering S. mutans outgrowth within mixed-species biofilms. As a result, the 3D architecture of cranberry-treated biofilms was severely compromised, showing a defective EPS-matrix and failure to develop microcolonies on the saliva-coated hydroxyapatite (sHA) surface. Furthermore, topical applications of cranberry flavonoids significantly weaken the mechanical stability of the biofilms; nearly 90% of the biofilm was removed from sHA surface after exposure to a shear stress of 0.449 N/m² (vs. 36% removal in vehicle-treated biofilms). Importantly, in situ pH measurements in cranberry-treated biofilms showed significantly higher pH values (5.2 ± 0.1) at the biofilm-apatite interface vs. vehicle-treated biofilms (4.6 ± 0.1). Altogether, the data provide important insights on how cranberry flavonoids treatments modulate virulence properties by disrupting the biochemical and ecological changes associated with cariogenic biofilm development, which could lead to new alternative or adjunctive antibiofilm/anticaries chemotherapeutic formulations.     

Automatic Determination of Bacterioplankton Biomass by Image Analysis

Image analysis was applied to epifluorescense microscopy of acridine orange-stained plankton samples. A program was developed for discrimination and binary segmentation of digitized video images, taken by an ultrasensitive video camera mounted on the microscope. Cell volumes were estimated from area and perimeter of the objects in the binary image. The program was tested on fluorescent latex beads of known diameters. Biovolumes measured by image analysis were compared with directly determined carbon biomasses in batch cultures of estuarine and freshwater bacterioplankton. This calibration revealed an empirical conversion factor from biovolume to biomass of 0.35 pg of C μm⁻³ (± 0.03 95% confidence limit). The deviation of this value from the normally used conversion factors of 0.086 to 0.121 pg of C μm⁻³ is discussed. The described system was capable of measuring 250 cells within 10 min, providing estimates of cell number, mean cell volume, and biovolume with a precision of 5%.     

Annual Bacterioplankton Biomasses and Productivities in a Temperate West Coast Canadian Fjord

Bacterioplankton numbers, biomasses, and productivities, as well as chlorophyll a concentrations and phytoplankton productivities, were assayed from 1 March 1984 to 12 August 1985 through a 250-m-deep seawater column in Howe Sound, a temperate fjord-sound on the southern coast of British Columbia, Canada. Primary production during this 18-month period was 845 g of C m⁻². Bacterial production was assayed over this same period as 193 g of C m⁻² (thymidine incorporation) and 77 g of C m⁻² (frequency of dividing cells). Bacterial productivities per cubic meter were usually greater in the euphotic zone than in deeper aphotic water, but when integrated through the water column, approximately half of the bacterial production occurred in the deeper aphotic portion. Bacterial production occurred throughout the year, although at reduced rates in late fall and early winter; primary production almost ceased during late fall and early winter. Because of this heterotrophic bacterioplankton production was a very large portion of the microbial (bacterial plus phyto-plankton) production at this time. In mid-summer bacterial production was a small proportion of the microbial production. Because of this asynchrony in peaks and troughs of bacterial and phytoplankton production through the year, data comparison is best done over an annual cycle. On this basis the bacterial production in the Howe Sound water column was between 23 and 9% of the phytoplankton production when a bacterial C to biovolume ratio of 0.107 pg of C μm⁻³ was assumed; the corresponding values were 64 and 29% when a ratio of 0.300 pg of bacterial C μm⁻³ was assumed.     

Gene Transfer Potential of Outer Membrane Vesicles of Acinetobacter baylyi and Effects of Stress on Vesiculation

Outer membrane vesicles (OMVs) are continually released from a range of bacterial species. Numerous functions of OMVs, including the facilitation of horizontal gene transfer (HGT) processes, have been proposed. In this study, we investigated whether OMVs contribute to the transfer of plasmids between bacterial cells and species using Gram-negative Acinetobacter baylyi as a model system. OMVs were extracted from bacterial cultures and tested for the ability to vector gene transfer into populations of Escherichia coli and A. baylyi, including naturally transformation-deficient mutants of A. baylyi. Anti-double-stranded DNA (anti-dsDNA) antibodies were used to determine the movement of DNA into OMVs. We also determined how stress affected the level of vesiculation and the amount of DNA in vesicles. OMVs were further characterized by measuring particle size distribution (PSD) and zeta potential. Transmission electron microscopy (TEM) and immunogold labeling were performed using anti-fluorescein isothiocyanate (anti-FITC)-conjugated antibodies and anti-dsDNA antibodies to track the movement of FITC-labeled and DNA-containing OMVs. Exposure to OMVs isolated from plasmid-containing donor cells resulted in HGT to A. baylyi and E. coli at transfer frequencies ranging from 10⁻⁶ to 10⁻⁸, with transfer efficiencies of approximately 10³ and 10² per μg of vesicular DNA, respectively. Antibiotic stress was shown to affect the DNA content of OMVs as well as their hydrodynamic diameter and zeta potential. Morphological observations suggest that OMVs from A. baylyi interact with recipient cells in different ways, depending on the recipient species. Interestingly, the PSD measurements suggest that distinct size ranges of OMVs are released from A. baylyi.     

Protein Mobility in the Cytoplasm of Escherichia coli

The rate of protein diffusion in bacterial cytoplasm may constrain a variety of cellular functions and limit the rates of many biochemical reactions in vivo. In this paper, we report noninvasive measurements of the apparent diffusion coefficient of green fluorescent protein (GFP) in the cytoplasm of Escherichia coli. These measurements were made in two ways: by photobleaching of GFP fluorescence and by photoactivation of a red-emitting fluorescent state of GFP (M. B. Elowitz, M. G. Surette, P. E. Wolf, J. Stock, and S. Leibler, Curr. Biol. 7:809–812, 1997). The apparent diffusion coefficient, D_a, of GFP in E. coli DH5α was found to be 7.7 ± 2.5 μm²/s. A 72-kDa fusion protein composed of GFP and a cytoplasmically localized maltose binding protein domain moves more slowly, with D_a of 2.5 ± 0.6 μm²/s. In addition, GFP mobility can depend strongly on at least two factors: first, D_a is reduced to 3.6 ± 0.7 μm²/s at high levels of GFP expression; second, the addition to GFP of a small tag consisting of six histidine residues reduces D_a to 4.0 ± 2.0 μm²/s. Thus, a single effective cytoplasmic viscosity cannot explain all values of D_a reported here. These measurements have implications for the understanding of intracellular biochemical networks.     

Kinetic Parameters of Denitrification in a River Continuum

Kinetic parameters for nitrate reduction in intact sediment cores were investigated by using the acetylene blockage method at five sites along the Swale-Ouse river system in northeastern England, including a highly polluted tributary, R. Wiske. The denitrification rate in sediment containing added nitrate exhibited a Michaelis-Menten-type curve. The concentration of nitrate for half-maximal activity (K_map) by denitrifying bacteria increased on passing downstream from 13.1 to 90.4 μM in the main river, but it was highest (640 μM) in the Wiske. The apparent maximal rate (V_maxap) ranged between 35.8 and 324 μmol of N m⁻² h⁻¹ in the Swale-Ouse (increasing upstream to downstream), but it was highest in the Wiske (1,194 μmol N m⁻² h⁻¹). A study of nitrous oxide (N₂O) production at the same time showed that rates ranged from below the detection limit (0.05 μmol of N₂O-N m⁻² h⁻¹) at the headwater site to 27 μmol of N₂O-N m⁻² h⁻¹ at the downstream site. In the Wiske the rate was up to 570 μmol of N₂O-N m⁻² h⁻¹, accounting for up to 80% of total N gas production.     

Microcystin Production by Microcystis aeruginosa in a Phosphorus-Limited Chemostat

The production of microcystins (MC) from Microcystis aeruginosa UTEX 2388 was investigated in a P-limited continuous culture. MC (MC-LR, MC-RR, and MC-YR) from lyophilized M. aeruginosa were extracted with 5% acetic acid, purified by a Sep-Pak C₁₈ cartridge, and then analyzed by high-performance liquid chromatography with a UV detector and Nucleosil C₁₈ reverse-phase column. The specific growth rate (μ) of M. aeruginosa was within the range of 0.1 to 0.8/day and was a function of the cellular P content under a P limitation. The N/P atomic ratio of steady-state cells in a P-limited medium varied from 24 to 15 with an increasing μ. The MC-LR and MC-RR contents on a dry weight basis were highest at μ of 0.1/day at 339 and 774 μg g⁻¹, respectively, while MC-YR was not detected. The MC content of M. aeruginosa was higher at a lower μ, whereas the MC-producing rate was linearly proportional to μ. The C fixation rate at an ambient irradiance (160 microeinsteins m⁻² s⁻¹) increased with μ. The ratios of the MC-producing rate to the C fixation rate were higher at a lower μ. Accordingly, the growth of M. aeruginosa was reduced under a P limitation due to a low C fixation rate, whereas the MC content was higher. Consequently, increases in the MC content per dry weight along with the production of the more toxic form, MC-LR, were observed under more P-limited conditions.     

Determination of Abundance and Biovolume of Bacteria in Sediments by Dual Staining with 4′,6-Diamidino-2-Phenylindole and Acridine Orange: Relationship to Dispersion Treatment and Sediment Characteristics

We measured the abundance and biovolume of bacteria in intertidal sediments from Tokyo Bay, Japan, by using a dual-staining technique (4′,6-diamidino-2-phenylindole and acridine orange) and several dispersion techniques (ultrasonic cleaner, ultrasonic sonicator, and tissue homogenizer). Dual staining reduced serious background fluorescence, particularly when used for silt-, clay-, and detritus-rich sediments, and allowed us to distinguish bacteria from other objects during both counting and sizing. Within the studied samples, the number of bacterial cells ranged from 0.20 × 10⁹ to 3.54 × 10⁹ g of wet sediment⁻¹. With the cleaner and sonicator treatments, the bacterial numbers for all of the sites initially increased with dispersion time and then became constant. For the homogenizer treatments, the highest bacterial numbers were observed with the shortest (0.5- to 2-min) treatments, and the counts then declined steeply as the homogenization time increased, indicating that cell destruction occurred. The cleaner treatment had the possibility of insufficient dispersion of bacteria for fine-grain sediments. Within the studied samples, the bacterial biovolume ranged from 0.07 to 0.22 μm³. With the cleaner and sonicator treatments, the biovolume peaked during the shorter dispersion time. This pattern was caused not by cell destruction but by the incremental portion of dispersed small cells. We concluded that with the cleaner and sonicator treatments, the longer dispersion time reflected the real size spectrum and was preferable for accurate estimation of mean bacterial biovolumes.