Inhibition of 1,4-beta-D-xylan xylanohydrolase by the specific aspartic protease inhibitor pepstatin: probing the two-step inhibition mechanism

This is the first report that describes the inhibition mechanism of xylanase from Thermomonospora sp. by pepstatin A, a specific inhibitor toward aspartic proteases. The kinetic analysis revealed competitive inhibition of xylanase by pepstatin A with an IC50 value 3.6 +/- 0.5 microm. The progress curves were time-depended, consistent with a two-step slow tight binding inhibition. The inhibition followed a rapid equilibrium step to form a reversible enzyme-inhibitor complex (EI), which isomerizes to the second enzyme-inhibitor complex (EI*), which dissociated at a very slow rate. The rate constants determined for the isomerization of EI to EI* and the dissociation of EI* were 15 +/- 1 x 10(-5) and 3.0 +/- 1 x 10(-8) s(-1), respectively. The Ki value for the formation of EI complex was 1.5 +/- 0.5 microm, whereas the overall inhibition constant Ki* was 28.0 +/- 1 nm. The conformational changes induced in Xyl I by pepstatin A were monitored by fluorescence spectroscopy, and the rate constants derived were in agreement with the kinetic data. Thus, the conformational alterations were correlated to the isomerization of EI to EI*. Pepstatin A binds to the active site of the enzyme and disturbs the native interaction between the histidine and lysine, as demonstrated by the abolished isoindole fluorescence of o-phthalaldehyde-labeled xylanase. Our results revealed that the inactivation of xylanase is due to the interference in the electronic microenvironment and disruption of the hydrogen-bonding network between the essential histidine and other residues involved in catalysis, and a model depicting the probable interaction between pepstatin A with xylanase has been proposed.     

Slow-tight binding inhibition of xylanase by an aspartic protease inhibitor: kinetic parameters and conformational changes that determine the affinity and selectivity of the bifunctional nature of the inhibitor

The first report of slow-tight inhibition of xylanase by a bifunctional inhibitor alkalo-thermophilic Bacillus inhibitor (ATBI), from an extremophilic Bacillus sp. is described. ATBI inhibits aspartic protease (Dash, C., and Rao, M. (2001) J. Biol. Chem., 276, 2487-2493) and xylanase (Xyl I) from a Thermomonospora sp. The steady-state kinetics revealed time-dependent competitive inhibition of Xyl I by ATBI, consistent with two-step inhibition mechanism. The inhibition followed a rapid equilibrium step to form a reversible enzyme-inhibitor complex (EI), which isomerizes to the second enzyme-inhibitor complex (EI*), which dissociated at a very slow rate. The rate constants determined for the isomerization of EI to EI*, and the dissociation of EI* were 13 +/- 1 x 10(-6) s(-1) and 5 +/- 0.5 x 10(-8) s(-1), respectively. The K(i) value for the formation of EI complex was 2.5 +/- 0.5 microm, whereas the overall inhibition constant K(i)* was 7 +/- 1 nm. The conformational changes induced in Xyl I by ATBI were monitored by fluorescence spectroscopy and the rate constants derived were in agreement with the kinetic data. Thus, the conformational alterations were correlated to the isomerization of EI to EI*. ATBI binds to the active site of the enzyme and disturbs the native interaction between the histidine and lysine, as demonstrated by the abolished isoindole fluorescence of o-phthalaldehyde (OPTA)-labeled Xyl I. Our results revealed that the inactivation of Xyl I is due to the disruption of the hydrogen-bonding network between the essential histidine and other residues involved in catalysis and a model depicting the probable interaction between ATBI or OPTA with Xyl I has been proposed.     

Structural and mechanistic insight into the inhibition of aspartic proteases by a slow-tight binding inhibitor from an extremophilic Bacillus sp.: correlation of the kinetic parameters with the inhibitor induced conformational changes

We present here the first report of a hydrophilic peptidic inhibitor, ATBI, from an extremophilic Bacillus sp. exhibiting a two-step inhibition mechanism against the aspartic proteases, pepsin and F-prot from Aspergillus saitoi. Kinetic analysis shows that these proteases are competitively inhibited by ATBI. The progress curves are time-dependent and consistent with slow-tight binding inhibition: E + I right arrow over left arrow (k(3), k(4)) EI right arrow over left arrow (k(5), k(6)) EI. The K(i) values for the first reversible complex (EI) of ATBI with pepsin and F-prot were (17 +/- 0.5) x 10(-9) M and (3.2 +/- 0.6) x 10(-6) M, whereas the overall inhibition constant K(i) values were (55 +/- 0.5) x 10(-12) M and (5.2 +/- 0.6) x 10(-8) M, respectively. The rate constant k(5) revealed a faster isomerization of EI for F-prot [(2.3 +/- 0.4) x 10(-3) s(-1)] than pepsin [(7.7 +/- 0.3) x 10(-4) s(-1)]. However, ATBI dissociated from the tight enzyme-inhibitor complex (EI) of F-prot faster [(3.8 +/- 0.5) x 10(-5) s(-1)] than pepsin [(2.5 +/- 0.4) x 10(-6) s(-1)]. Comparative analysis of the kinetic parameters with pepstatin, the known inhibitor of pepsin, revealed a higher value of k(5)/k(6) for ATBI. The binding of the inhibitor with the aspartic proteases and the subsequent conformational changes induced were monitored by exploiting the intrinsic tryptophanyl fluorescence. The rate constants derived from the fluorescence data were in agreement with those obtained from the kinetic analysis; therefore, the induced conformational changes were correlated to the isomerization of EI to EI. Chemical modification of the Asp or Glu by WRK and Lys residues by TNBS abolished the antiproteolytic activity and revealed the involvement of two carboxyl groups and one amine group of ATBI in the enzymatic inactivation.     

Biochemical characterization of a low molecular weight aspartic protease inhibitor from thermo-tolerant Bacillus licheniformis: kinetic interactions with Pepsin

The present article reports a low molecular weight aspartic protease inhibitor, API, from a newly isolated thermo-tolerant Bacillus licheniformis. The inhibitor was purified to homogeneity as shown by rp-HPLC and SDS-PAGE. API is found to be stable over a broad pH range of 2-11 and at temperature 90 degrees C for 2 1/2h. It has a Mr (relative molecular mass) of 1363 Da as shown by MALDI-TOF spectra and 1358 Da as analyzed by SDS-PAGE .The amino acid analysis of the peptide shows the presence of 12 amino acid residues having Mr of 1425 Da. The secondary structure of API as analyzed by the CD spectra showed 7% alpha-helix, 49% beta-sheet and 44% aperiodic structure. The Kinetic studies of Pepsin-API interactions reveal that API is a slow-tight binding competitive inhibitor with the IC(50) and Ki values 4.0 nM and (3.83 nM-5.31 nM) respectively. The overall inhibition constant Ki* value is 0.107+/-0.015 nM. The progress curves are time-dependent and consistent with slow-tight binding inhibition: E+I -->/<-- (k(4), k(5)) EI -->/<-- (k(6), k(7)) EI*. Rate constant k(6)=2.73+/-0.32 s(-1) reveals a fast isomerization of enzyme-inhibitor complex and very slow dissociation as proved by k(7)=0.068+/-0.009 s(-1). The Rate constants from the intrinsic tryptophanyl fluorescence data is in agreement with those obtained from the kinetic analysis; therefore, the induced conformational changes were correlated to the isomerization of EI to EI*.     

Tryptophan fluorescence as a probe of placental ribonuclease inhibitor binding to angiogenin

The binding of human placental ribonuclease inhibitor (PRI) to angiogenin, a human protein that induces neovascularization, occurs with a 1:1 stoichiometry and is accompanied by a 50% increase in tryptophan fluorescence. In contrast, the binding of PRI to bovine pancreatic RNase A or to angiogenin oxidized at its single tryptophan residue results in a quenching of fluorescence. These observations suggest that there is a change in the local environment of Trp-89 of angiogenin. Quenching experiments with acrylamide are consistent with the view that Trp-89 is exposed in the native protein and becomes less accessible upon formation of the complex with PRI. Stopped-flow kinetic measurements monitoring the fluorescence enhancement indicate a two-step mechanism for the binding of PRI to angiogenin. The first step involves rapid formation of an enzyme-inhibitor complex, EI, followed by a slower isomerization of EI to a tight enzyme-inhibitor complex, EI*: (Formula: see text). In 0.1 M NaCl at pH 6 and 25 degrees C, the values of K1 and K2 are 0.53 microM and 97 s-1, respectively. The apparent second-order rate constant of association at protein concentrations much less than K1 is approximated by K2/K1 and equals 1.8 X 10(8) M-1 s-1. The corresponding value for the association of PRI with RNase A is only slightly higher, 3.4 X 10(8) M-1 s-1. The effects of pH and sodium chloride concentration on the association rate of PRI with angiogenin suggest the importance of ionizable groups and ionic interactions, respectively, in the association process.(ABSTRACT TRUNCATED AT 250 WORDS)     

Reaction pathway for inhibition of blood coagulation factor Xa by tick anticoagulant peptide.

The reaction pathway for inhibition of human factor Xa (fXa) by recombinant tick anticoagulant peptide (rTAP) was studied by stopped-flow fluorometry. In the presence of the fluorogenic substrate N-tert-butyloxycarbonyl-L-isoleucyl-L-glutamylglycyl-L-arginyl-7-amido-4 - methylcoumarin (B-IEGR-AMC) and under pseudo-first-order conditions, inhibition appears to occur via a two-step process. Initially, a weak enzyme-inhibitor complex forms with a dissociation constant (Ki) of 68 +/- 6 microM. The initial complex then rearranges to a more stable fXa-rTAP complex with a rate constant (k2) of 123 +/- 5 s-1. The apparent second-order rate constant (k2/Ki) describing formation of the stable complex is (1.8 +/- 0.2) x 10(6) M-1 s-1. Studies of the reaction of rTAP with fXa in the presence of the fluorescent active-site probe p-amino-benzamidine (P) revealed a reaction pathway wherein rTAP initially binds to the fXa-P complex in a two-step process prior to displacing P from the active site. These results indicate that rTAP can bind fXa via a site distinct from the active site (an exosite). The subsequent displacement of P from the active site of fXa by rTAP exhibits a dependence on the concentration of P, indicating that rTAP is locked into the active site in a third step.(ABSTRACT TRUNCATED AT 250 WORDS)     

Inhibition of jack bean urease by 1,4-benzoquinone and 2,5-dimethyl-1,4-benzoquinone. Evaluation of the inhibition mechanism

1,4-benzoquinone (BQ) and 2,5-dimethyl-1,4-benzoquinone (DMBQ) were studied as inhibitors of jack bean urease in 50 mM phosphate buffer, pH 7.0. The mechanisms of inhibition were evaluated by progress curves studies and steady-state approach to data achieved by preincubation of the enzyme with the inhibitor. The obtained reaction progress curves were time-dependent and characteristic of slow-binding inhibition. The effects of different concentrations of BQ and DMBQ on the initial and steady-state velocities as well as the apparent first-order velocity constants obeyed the relationships of two-step enzyme-inhibitor interaction, qualified as mechanism B. The rapid formation of an initial BQ-urease complex with an inhibition constant of Ki = 0.031 mM was followed by a slow isomerization into the final BQ-urease complex with the overall inhibition constant of Ki* = 4.5 x 10(-5) mM. The respective inhibition constants for DMBQ were Ki = 0.42 mM, Ki* = 1.2 x 10(-3) mM. The rate constants of the inhibitor-urease isomerization indicated that forward processes were rapid in contrast to slow reverse reactions. The overall inhibition constants obtained by the steady-state analysis were found to be 5.1 x 10(-5) mM for BQ and 0.98 x 10(-3) mM for DMBQ. BQ was found to be a much stronger inhibitor of urease than DMBQ. A test, based on reaction with L-cysteine, confirmed the essential role of the sulfhydryl group in the inhibition of urease by BQ and DMBQ.     

Heavy metal ions inhibition of jack bean urease: potential for rapid contaminant probing

The kinetics of heavy metal ions inhibition of jack bean urease was studied by progress curve analysis in a reaction system without enzyme-inhibitor preincubation. The inhibition was found to be biphasic with an initial, small inhibitory phase changing over the time course of 5-10 min into a final linear steady state with a lower velocity. This time-dependent pattern was best described by mechanism B of slow-binding inhibition, involving the rapid formation of an EI complex that subsequently undergoes slow conversion to a more stable EI* complex. The kinetic parameters of the process, the inhibition constants Ki and Ki* and the forward k5 and reverse k6 rate constants for the conversion, were evaluated from the reaction progress curves by nonlinear regression treatment. Based on the values of the overall inhibition constant Ki*, the heavy metal ions were found to inhibit urease in the following decreasing order: Hg2+ > Cu2+ > Zn2+ > Cd2+ > Ni2+ > Pb2+ > Co2+ > Fe3+ > As3+. With the Ki* values as low as 1.9 nM for Hg2+ and 7.1 nM for Cu2+, 100-1000 times lower than those of the other ions, urease may be utilized as a bioindicator of the trace levels of these ions in environmental monitoring, bioprocess control or pharmaceutical analysis.     

Quantitative structure-activity relationships for the pre-steady-state inhibition of cholesterol esterase by 4-nitrophenyl-N-substituted carbamates

4-Nitrophenyl-N-substituted carbamates (1-6) are the pseudo-substrate inhibitors of porcine pancreatic cholesterol esterase. Thus, the first step of the inhibition (Ki step) is the formation of the enzyme inhibitor tetrahedral adduct and the second step of the inhibition (kc) is the formation of the carbamyl enzyme. The formation of the enzyme inhibitor tetrahedral adduct is further divided into two steps, the formation of the enzyme-inhibitor complex with the dissociation constant, KS, at the first step and the formation of the enzyme-inhibitor tetrahedral adduct from the complex at the second step. The two-step mechanism for the formation of the enzyme-inhibitor tetrahedral adduct is confirmed by the pre-steady-state kinetics. The results of quantitative structure-activity relationships for the pre-steady-state inhibitions of cholesterol esterase by carbamates 1-6 indicate that values of -logKs and logk2/k-2 are correlated with the Taft substituent constant, sigma*, and the rho* values from these correlations are -0.33 and 0.1, respectively. The negative rho* value for the -logKS-sigma*-correlation indicates that the first step of the two-step formation of the enzyme-inhibitor tetrahedral adduct (KS step) is the formation of the positive enzyme inhibitor complex. The positive rho* value for the logk2/k-2 -sigma*-correlation indicates that the enzyme inhibitor tetrahedral adduct is more negative than the enzyme inhibitor complex. Finally, the two-step mechanism for the formation of the enzyme inhibitor tetrahedral adduct is proposed according to these results. Thus, the partially positive charge is developed at nitrogen of carbamates 1-6 in the enzyme-inhibitor complex probably due to the hydrogen bonding between the lone pair of nitrogen of carbamates 1-6 and the amide hydrogen of the oxyanion hole of the enzyme. The second step of the two-step formation of the enzyme-inhibitor tetrahedral adduct is the nucleophilic attack of the serine of the enzyme to the carbonyl group of carbamates 1-6 in the enzyme-inhibitor complex and develops the negative-charged oxygen in the adduct.     

Reaction of Lactobacillus histidine decarboxylase with L-histidine methyl ester

L-Histidine methyl ester inactivates histidine decarboxylase in a time-dependent manner. The possibility was considered that an irreversible reaction between enzyme and inhibitor occurs [Recsei, P. A., & Snell, E. E. (1970) Biochemistry 9, 1492-1497]. We have confirmed time-dependent inactivation by histidine methyl ester and have investigated the structure of the enzyme-inhibitor complex. Upon exposure to either 8 M guanidinium chloride or 6% trichloroacetic acid, unchanged histidine methyl ester is recovered. Formation of the complex involves Schiff base formation, most likely with the active site pyruvyl residue [Huynh, Q. K., & Snell, E. E. (1986) J. Biol. Chem. 261, 4389-4394], but does not involve additional irreversible covalent interaction between inhibitor and enzyme. Complex formation is a two-step process involving rapidly reversible formation of a loose complex and essentially irreversible formation of a tight complex. For the formation of the tight complex, Ki = 80 nM and koff = 2.5 X 10(-4) min-1. Time-dependent inhibition was also observed with L-histidine ethyl ester, L-histidinamide, and DL-3-amino-4-(4-imidazolyl)-2-butanone. No inactivation was observed with glycine methyl ester or histamine. We propose that in the catalytic reaction the carboxyl group of the substrate is in a hydrophobic region. The unfavorable interaction between the carboxylate group and the hydrophobic region facilitates decarboxylation [Crosby, J., Stone, R., & Liehard, G. E. (1970) J. Am. Chem. Soc. 92, 2891-2900]. With histidine methyl ester this unfavorable interaction is no longer present; hence, there is tight binding.(ABSTRACT TRUNCATED AT 250 WORDS)     

Mechanism of time-dependent inhibition of polypeptide deformylase by actinonin

Polypeptide deformylase (PDF) is an essential bacterial metalloenzyme responsible for the removal of the N-formyl group from the N-terminal methionine of nascent polypeptides. Inhibition of bacterial PDF enzymes by actinonin, a naturally occurring antibacterial agent, has been characterized using steady-state and transient kinetic methods. Slow binding of actinonin to these enzymes is observed under steady-state conditions. Progress curve analysis is consistent with a two-step binding mechanism, in which tightening of the initial encounter complex (EI) results in a final complex (EI*) with an extremely slow, but observable, off-rate (t(1/2) for inhibitor dissociation >or=0.77 days). Stopped-flow measurement of PDF fluorescence confirms formation of EI and provides a direct measurement of the association rate. Rapid dilution studies establish that the potency of actinonin is enhanced by more than 2000-fold upon tightening of EI to form EI*, from K(i) = 530 nM (EI) to Ki*相似文献   

Kinetics of the inhibition of human pancreatic elastase by recombinant eglin c. Influence of elastin.

Recombinant eglin c is a potent reversible inhibitor of human pancreatic elastase. At pH 7.4 and 25 degrees C, kass. = 7.3 x 10(5) M-1.s-1, kdiss. = 2.7 x 10(-4) s-1 and Ki = 3.7 x 10(-10) M. Stopped-flow kinetic indicate that the formation of the stable enzyme-inhibitor complex is not preceded by a fast pre-equilibrium complex or that the latter has a dissociation constant greater than 0.3 microM. The elastase-eglin c complex is much less stable at pH 5.0 and 25 degrees C, where kdiss. = 1.1 x 10(-2) s-1 and Ki = 7.3 x 10(-8) M. At pH 7.4 the activation energy for kass. is 43.9 kJ.mol-1 (10.5 kcal.mol-1). The kass. increases between pH 5.0 and 8.0 and remains essentially constant up to pH 9.0. This pH-dependence could not be described by a simple ionization curve. Both alpha 2-macroglobulin and alpha 1-proteinase inhibitor are able to dissociate the elastase-eglin c complex, as evidenced by measurement of the enzymic activity of alpha 2-macroglobulin-bound elastase or by polyacrylamide-gel electrophoresis of mixtures of alpha 1-proteinase inhibitor and elastase-eglin c complex. The rough estimate of kdiss. obtained with the alpha 2-macroglobulin dissociation experiment (1.6 x 10(-4) s-1) was of the same order of magnitude as the constant measured with the progress curve method. Eglin c strongly inhibits the solubilization of human aorta elastin by human pancreatic elastase. The extent of inhibition is the same whether elastase is added to a suspension of elastin and eglin c or whether elastase is preincubated with elastin for 3 min before addition of eglin c. However, the efficiency of the inhibitor sharply decreases if elastase is reacted with elastin for more prolonged periods.     

Potent slow-binding inhibition of cathepsin B by its propeptide.

A peptide (PCB1) corresponding to the proregion of the rat cysteine protease cathepsin B was synthesized and its ability to inhibit cathepsin B activity investigated. PCB1 was found to be a potent inhibitor of mature cathepsin B at pH 6.0, yielding a Ki = 0.4 nM. This inhibition obeyed slow-binding kinetics and occurred as a one-step process with a k1 = 5.2 x 10(5) M-1 s-1 and a k2 = 2.2 x 10(-4) s-1. On dropping from pH 6.0 to 4.7, Ki increased markedly, and whereas k1 remained essentially unchanged, k2 increased to 4.5 x 10(-3) s-1. Thus, the increase in Ki at lower pH is due primarily to an increased dissociation rate for the cathepsin B/PCB1 complex. At pH 4.0, the inhibition was 160-fold weaker (Ki = 64 nM) than at pH 6.0, and the propeptide appeared to behave as a classical competitive inhibitor rather than a slow-binding inhibitor. Incubation of cathepsin B with a 10-fold excess of PCB1 overnight at pH 4.0 resulted in extensive cleavage of the propetide whereas no cleavage occurred at pH 6.0, consistent with the formation of a tight complex between cathepsin B and PCB1 at the higher pH. The synthetic propeptide of cathepsin B was found to be a much weaker inhibitor of papain, a structurally similar cysteine protease, and no pH dependence was observed. Inhibition constants of 2.8 and 5.6 microM were obtained for papain inhibition by PCB1 at pH 4.0 and 6.0, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)     

Kinetic analysis of the inhibition of the epidermal growth factor receptor tyrosine kinase by Lavendustin-A and its analogue

Lavendustin-A was reported to be a potent tyrosine kinase inhibitor of the epidermal growth factor (EGF) receptor (Onoda, T., Iinuma, H., Sasaki, Y., Hamada, M., Isshibi, K., Naganawa, H., Takeuchi, T., Tatsuta, K., and Umezawa, K. (1989) J. Nat. Prod. 52, 1252-1257). Its inhibition kinetics was studied in detail using the baculovirus-expressed recombinant intracellular domain of the EGF receptor (EGFR-IC). Lavendustin-A (RG 14355) is a slow and tight binding inhibitor of the receptor tyrosine kinase. The pre-steady state kinetic analysis demonstrates that the inhibition corresponds to a two-step mechanism in which an initial enzyme-inhibitor complex (EI) is rapidly formed followed by a slow isomerization step to form a tight complex (EI*). The dissociation constant for the initial rapid forming complex is 370 nM, whereas the overall dissociation constant is estimated to be less than or equal to 1 nM. The difference between the two values is due to the tight binding nature of the inhibitor to the enzyme in EI*. The kinetic analysis using a preincubation protocol to pre-equilibrate the enzyme with the inhibitor in the presence of one substrate showed that Lavendustin-A is a hyperbolic mixed-type inhibitor with respect to both ATP and the peptide substrate, with a major effect on the binding affinities for both substrates. An analogue of Lavendustin-A (RG 14467) showed similar inhibition kinetics to that of Lavendustin-A. The results of the pre-steady state analysis are also consistent with the proposed two-step mechanism. The dissociation constant for the initial fast forming complex in this case is 3.4 microM, whereas the overall dissociation constant is estimated to be less than or equal to 30 nM. It is a partial (hyperbolic) competitive inhibitor with respect to ATP. Its inhibition is reduced to different extents by different peptide substrates, when the peptide is added to the enzyme simultaneously with the inhibitor. When studied with the least protective peptide, K1 (a peptide containing the major autophosphorylation site of the EGF receptor), RG 14467 acts as a hyperbolic noncompetitive inhibitor with respect to the peptide.     

Kinetics of slow, tight-binding inhibitors of angiotensin converting enzyme

Five phosphorus-containing inhibitors of angiotensin converting enzyme were found to exhibit slow, tight-binding kinetics by using furanacryloyl-L-phenylalanylglycylglycine as substrate at pH 7.50 and T = 25 degrees C. Two of the inhibitors, (O-ethylphospho)-Ala-Pro (2) and (O-isopropylphospho)-Ala-Pro (3), are found to follow at minimum a two-step mechanism of binding (mechanism B) to the enzyme. This mechanism consists of an initial fast formation of a weaker enzyme-inhibitor complex (Ki = 130 nM for 2 and 180 nM for 3) followed by a slow reversible isomerization to a tighter complex with measurable forward (K3) and reverse (k4) rate constants (k3 = 4.5 X 10(-2) s-1 for 2 and 5.4 X 10(-2) s-1 for 3; k4 = 9.2 X 10(-3) s-1 for 2 and 3.5 X 10(-3) s-1 for 3). For the remaining three inhibitors, phospho-Ala-Pro (1), (O-benzyl-phospho)-Ala-Pro (4), and (P-phenethylphosphono)-Ala-Pro (5), a one-step binding mechanism (mechanism A) is observed under the conditions of the experiment. The second-order rate constants k1 (M-1 s-1) for the binding of these inhibitors to converting enzyme are found to have values more than 3 orders of magnitude lower than the diffusion-controlled limit for a bimolecular reaction involving the enzyme, viz., 3.9 X 10(5) for 1, 2.2 X 10(5) for 4, and 4.8 X 10(5) for 5.(ABSTRACT TRUNCATED AT 250 WORDS)     

Mechanism of Gly-Pro-pNA cleavage catalyzed by dipeptidyl peptidase-IV and its inhibition by saxagliptin (BMS-477118)

Dipeptidyl peptidase-IV (DPP-IV) is a serine protease with a signature Asp-His-Ser motif at the active site. Our pH data suggest that Gly-Pro-pNA cleavage catalyzed by DPP-IV is facilitated by an ionization of a residue with a pK of 7.2 +/- 0.1. By analogy to other serine proteases this pK is suggestive of His-Asp assisted Ser addition to the P1 carbonyl carbon of the substrate to form a tetrahedral intermediate. Solvent kinetic isotope effect studies yielded a D2Okcat/Km=2.9+/-0.2 and a D2Okcat=1.7+/-0.2 suggesting that kinetically significant proton transfers contribute to rate limitation during acyl intermediate formation (leaving group release) and hydrolysis. A "burst" of product release during pre steady-state Gly-Pro-pNA cleavage indicated rate limitation in the deacylation half-reaction. Nevertheless, the amplitude of the burst exceeded the enzyme concentration significantly (approximately 15-fold), which is consistent with a branching deacylation step. All of these data allowed us to better understand DPP-IV inhibition by saxagliptin (BMS-477118). We propose a two-step inhibition mechanism wherein an initial encounter complex is followed by covalent intermediate formation. Final inhibitory complex assembly (kon) depends upon the ionization of an enzyme residue with a pK of 6.2 +/- 0.1, and we assigned it to the catalytic His-Asp pair which enhances Ser nucleophilicity for covalent addition. An ionization with a pK of 7.9 +/- 0.2 likely reflects the P2 terminal amine of the inhibitor hydrogen bonding to Glu205/Glu206 in the enzyme active site. The formation of the covalent enzyme-inhibitor complex was reversible and dissociated with a koff of (5.5 +/- 0.4) x 10(-5) s(-1), thus yielding a Ki* (as koff/kon) of 0.35 nM, which is in good agreement with the value of 0.6 nM obtained from steady-state inhibition studies. Proton NMR spectra of DPP-IV showed a downfield resonance at 16.1 ppm. Two additional peaks in the 1H NMR spectra at 17.4 and 14.1 ppm were observed upon mixing the enzyme with saxagliptin. Fractionation factors (phi) of 0.6 and 0.5 for the 17.4 and 14.1 ppm peaks, respectively, are suggestive of short strong hydrogen bonds in the enzyme-inhibitor complex.     

Kinetic study on chemical modification of taka-amylase A. I. Location and role of tryptophan residues

1. Five and four tryptophan residues in Taka-amylase A [EC 3.2.1.1] of A. oryzae (TAA) were modified with dimethyl(2-hydroxy-5-nitrobenzyl)-sulfonium bromide (K-IWS) in the absence and the presence of 15% maltose (substrate analog), respectively. Only one tryptophan residue was modified with dimethyl(2-methoxy-5-nitrobenzyl)-sulfonium bromide (K-IIWS) irrespective of the presence or absence of maltose. Kinetic parameters (molecular activity, k0, Michaelis constant, Km, and inhibitor constant, Ki) of the enzyme modified with K-IWS and K-IIWS were determined. The k0 value decreased with increase in the number of modified residues, but Km and Ki values and the type of inhibition were not altered by the modification. 2. The fluorescence quenching reaction of TAA with N-bromosuccinimide (NBS) proceeded in three phases. The second-order rate constants of the three phases were determined to be (4.3 +/- 0.5) x 10(5) M-1 . s-1, (2.1 +/- 0.3) x 10(3) M-1 . s-1 and (1.7 +/- 0.2) x 10(2) M-1 . s-1, respectively. In the presence of maltose, the first phase was further separated into two phases with rate constants of (4.6 +/- 0.6) x 10(6) M-1 . s-1 and (6.9 +/- 1.1) x 10(4) M-1 . s-1, respectively. On the basis of the results, it is estimated that five out of nine tryptophan residues are accessible to the solvent and among them, two tryptophan residues are substantially exposed: one is located in the maltose binding site near the catalytic site (its modification affects the catalytic function), and the other exists on the enzyme surface far from the active site.     

Inactivation of delta 5-3-oxo steroid isomerase with active-site-directed acetylenic steroids.

Several steroid analogues containing conjugated acetylenic ketone groups as part of a seco-ring structure or as substituents on the intact steroid system are irreversible inhibitors of delta 5-3-oxo steroid isomerase (EC 5.3.3.1) from Pseudomonas testosteroni. Thus 10 beta-(1-oxoprop-2-ynyl)oestr-4-ene-3,17-dione (I), 5,10-seco-oestr-4-yne-3,10,17-trione (II), 17 beta-hydroxy-5,10-seco-oestr-4-yne-3,10-dione (III) and 17 beta-(1-oxoprop-2-ynyl)androst-4-en-3-one (IV) irreversibly inactivate isomerase in a time-dependent manner. In all cases saturation kinetics are observed. Protection against inactivation is afforded by the powerful competitive inhibitor 19-nortestosterone. The inhibition constants (Ki) for 19-nortestosterone obtained from such experiments are in good agreement with those determined from conventional competitive-inhibition studies of enzyme activity. These compounds thus appear to be active-site directed. In every case the inactivated enzyme could be dialysed without return of activity, indicating that a stable covalent bond probably had formed between the steroid and enzyme. Compound (I) is a very potent inhibitor of isomerase [Ki = 66.0 microM and k+2 = 12.5 x 10(-3) s-1 (where Ki is the dissociation constant of the reversible enzyme-inhibitor complex and k+2 is the rate constant for the inactivation reaction of the enzyme-inhibitor complex)] giving half-lives of inactivation of 30-45 s at saturation. It is argued that the basic-amino-acid residue that abstracts the intramolecularly transferred 4 beta-proton in the reaction mechanism could form a Michael-addition product with compound (I). In contrast, although compound (IV) has a lower inhibition constant (Ki = 14.5 microM), it is a relatively poor alkylating agent (k+2 = 0.13 x 10(-3) s-1). If the conjugated acetylenic ketone groups are replaced by alpha-hydroxyacetylene groups, the resultant analogues of steroids (I)-(IV) are reversible competitive inhibitors with Ki values in the range 27-350 microM. The enzyme binds steroids in the C19 series with functionalized acetylenic substituents at C-17 in preference to steroids in the C18 series bearing similar groups in the ring structure or as C-10 substituents. In the 5,10-seco-steroid series the presence of hydroxy groups at both C-3 and C-17 is deleterious to binding by the enzyme.     

Titration of active centers of enzymes by means of reversible inhibitors. Dipeptidyl-carboxypeptidase - inhibitor SQ 20881 from venom of the snake Bothrops jararca)

The essentials of estimation of the number of enzyme active sites by reversible inhibition are discussed. The necessity of evaluation of the substrate effect on the equilibrium of the systems with a rapidly dissociating enzyme -- inhibitor complex has been demonstrated. Some procedures for determination of the number of active sites of dipeptidyl-carboxypeptidase (EC 3.4.15.1) from bovine kidney cortex, using the competitive inhibitor SQ 20 881 (Glu-Trp-Pro-Arg-Pro-Gln-Ile-Pro-Pro) have been developed. The kinetic and equilibrium constants for the enzyme-inhibitor interaction (ki = 3.2 . 10(6) M-1s-1, k-i = 8 ms-1 and Ki = 2.5 +/- 0.5 nm) have been calculated.     

Linear relationships between the ligand binding energy and the activation energy of time-dependent inhibition of steroid 5alpha-reductase by delta 1-4-azasteroids

The inhibition of steroid 5alpha-reductase (5AR) by Delta(1)-4-azasteroids is characterized by a two-step time-dependent kinetic mechanism where inhibitor combines with enzyme in a fast equilibrium, defined by the inhibition constant K(i), to form an initial reversible enzyme-inhibitor complex, which subsequently undergoes a time-dependent chemical rearrangement, defined by the rate constant k(3), leading to the formation of an apparently irreversible, tight-binding enzyme-inhibitor complex (Tian, G., Mook, R. A., Jr., Moss, M. L., and Frye, S. V. (1995) Biochemistry 34, 13453-13459). A detailed kinetic analysis of this process with a series of Delta(1)-4-azasteroids having different C-17 substituents was performed to understand the relationships between the rate of time-dependent inhibition and the affinity of the time-dependent inhibitors for the enzyme. A linear correlation was observed between ln(1/K(i)), which is proportional to the ligand binding energy for the formation of the enzyme-inhibitor complex, and ln(1/(k(3)/K(i))), which is proportional to the activation energy for the inhibition reaction under the second order reaction condition, which leads to the formation of the irreversible, tight-binding enzyme-inhibitor complex. The coefficient of the correlation was -0.88 +/- 0.07 for type 1 5AR and -1.0 +/- 0.2 for type 2 5AR. In comparison, there was no obvious correlation between ln(1/K(i)) and ln(1/k(3)), which is proportional to the activation energy of the second, time-dependent step of the inhibition reaction. These data are consistent with a model where ligand binding energies provided at C-17 of Delta(1)-4-azasteroids is fully expressed to lower the activation energy of k(3)/K(i) with little perturbation of the energy barrier of the second, time-dependent step.