Contribution of mono- and biarticular muscles to extending knee joint moments in runners and cyclists.

Motor actions are governed by coordinated activation of mono- and biarticular muscles. This study considered differences in mono- and biarticular knee extensors between runners and cyclists in the context of adaptations to task-specific movement requirements. Two hypotheses were tested: 1) the length-at-use hypothesis, which is that muscle adapts to have it operate around optimal length; and 2) the contraction-mode hypothesis, which is that eccentrically active muscles prefer to operate on the ascending limb of the length-force curve. Ten runners and ten cyclists performed maximal, isometric knee extensions on a dynamometer at five knee and four hip joint angles. This approach allowed the separation of the contribution of mono- and biarticular extensors. Three major differences occurred: 1) compared with runners, monoarticular extensors of cyclists reach optimal length at larger muscle length; 2) in runners, optimal length of the biarticular extensor is shifted to larger lengths; and 3) the moment generated by monoarticular extensor was larger in cyclists. Mono- and biarticular extensors respond to different adaptation triggers in runners and cyclists. Monoarticular muscles seem to adapt to the length-at-use, whereas biarticular muscles were found to be sensitive to the contraction-mode hypothesis.     

Development of a noninvasive technique for the measurement of intracranial pressure.

Intracranial pressure (ICP) dynamics are important for understanding adjustments to altered gravity. Previous flight observations document significant facial edema during exposure to microgravity, which suggests that ICP is elevated during microgravity. However, there are no experimental results obtained during space flight, primarily due to the invasiveness of currently available techniques. We have developed and refined a noninvasive technique to measure intracranial pressure noninvasively. The technique is based upon detecting skull movements of a few micrometers in association with altered intracranial pressure. We reported that the PPLL technique has enough sensitivity to detect changes in cranial distance associated with the pulsation of ICP in cadavera. In normal operations, however, we place a transducer on the scalp. Thus, we cannot rule out the possibility that the PPLL technique picks up cutaneous pulsation. The purpose of the present study was therefore to show that the PPLL technique has enough sensitivity to detect changes in cranial distance associated with cardiac cycles in vivo.     

Hip endoprosthesis for in vivo measurement of joint force and temperature.

Friction between the prosthetic head and acetabular cup increases the temperature in hip implants during activities like walking. A hip endoprosthesis was instrumented with sensors to measure the joint contact forces and the temperature distribution along the entire length of the titanium implant. Sensors and two inductively powered telemetry units are placed inside the hip implant and hermetically sealed against body fluids. Each telemetry unit contains an integrated 8-channel telemetry chip and a radio frequency transmitter. Force, temperature and power supply data are transmitted at different frequencies by two antennas to an external twin receiver. The inductive power supply is controlled by a personal computer. Force and temperature are monitored in real time and all data are stored on a video tape together with the patient's images. This paper describes the design and accuracy of the instrumented implant and the principal function of the external system components.     

Activity of mono- and biarticular leg muscles during sprint running

A cinematographic recording of the movements of the lower limbs together with simultaneous emg tracings from nine lower limb muscles were obtained from two male track sprinters during three phases of a 100 m sprint run. The extensor muscles of the hip joint were found to be the primary movers by acceleration of the body's center of gravity (C.G.) during the ground phase of the running cycle. The extensors of the knee joint were also important in this, but to a minor extent, while the plantar flexors of the ankle joint showed the least contribution. The biarticular muscles functioned in a way different from the monoarticular muscles in the sense that they perform eccentric work during the flight and recovery phases and concentric work during the whole ground phase (support), whereas the monoarticular muscles are restricted first to eccentric work and then to concentric work during the ground phase. Furthermore, the biarticular muscles show variation (and rate of variation) in muscle length to a larger extent than the monoarticular muscles. Paradoxical muscle actions appear to take place around the knee joint, where the hamstring muscles, m. gastrocnemius, m. vastus laterialis and m. vastus medialis act as synergists by extending the knee joint during the last part of the ground phase.     

A technique for the measurement of breakage and repair of DNA alkylated in vivo.

The alkaline elution technique has been adapted for use in the assessment of DNA damage induced in the livers and lungs of mice after administration of an alkylating agent, methylemthanesulfonat (MMS). At 4 h after administration of MMS, damage ot DNA was readily demonstrable; the damage was repaired in liver by 24 h. The lung, particularly of the A/J mouse, exhibited an increased alkaline elution rate when compared to C57BL/6J, and repair was not entirely complete (as judged from the rate of alkaline elution of DNA) by 24 h. The rate of elution was dependent upon temperature. It is believed that this adaptation should have great utility in examining DNA repair in vivo.     

The force resulting from the action of mono- and biarticular muscles in a limb.

Human and animal limbs can be modelled as a chain of segments connected at joints. For a static limb, the force exerted at the endpoint due to the force of a single muscle has been calculated. It turns out that there are marked differences in the action of mono- vs. biarticular muscles. Monoarticular muscles produce an endpoint force that is directed in the lengthwise direction of the limb, i.e. in the direction of one of the segments. The force from biarticular muscles can have a marked transverse component. The 'principal direction' of this endpoint force is also the movement direction of the endpoint which is the most favourable for the muscle to do work. The reasoning presented can explain e.g. the differences in the activity of mono- and biarticular muscles in cycling.     

Four-channel telemetry system for in vivo measurement of hip joint forces

The long-term loosening of artificial hip joints remains a serious clinical problem. Optimization of implant design and material will improve the fixation, but it requires a detailed knowledge of the forces which act on the implant. A four-channel telemetric transmitter was developed and arranged completely inside a hermetically closed artificial hip joint. This permits long term in vivo measurements of the three-dimensional forces without endangering the patient. The external telemetry system consists of an inductive power supply, an RF receiver, a microcomputer with hardware extension and a VHS video system. The personal computer offers real-time data processing of three orthogonal force components as well as slow motion analysis of recorded measurements. After several years of animal tests, two instrumented prostheses were implanted in the first patient (male) in May and August of 1988. In March 1990 a third prosthesis was implanted in a second patient (female). Joint force measurements have regularly been performed from the first post-operative day until now for several kinds of activity.     

A new non-orthogonal decomposition method to determine effective torques for three-dimensional joint rotation

This paper describes a new non-orthogonal decomposition method to determine effective torques for three-dimensional (3D) joint rotation. A rotation about a joint coordinate axis (e.g. shoulder internal/external rotation) cannot be explained only by the torque about the joint coordinate axis because the joint coordinate axes usually deviate from the principal axes of inertia of the entire kinematic chain distal to the joint. Instead of decomposing torques into three orthogonal joint coordinate axes, our new method decomposes torques into three "non-orthogonal effective axes" that are determined in such a way that a torque about each effective axis produces a joint rotation only about one of the joint coordinate axes. To demonstrate the validity of this new method, a simple internal/external rotation of the upper arm with the elbow flexed at 90 degrees was analyzed by both orthogonal and non-orthogonal decomposition methods. The results showed that only the non-orthogonal decomposition method could explain the cause-effect mechanism whereby three angular accelerations at the shoulder joint are produced by the gravity torque, resultant joint torque, and interaction torque. The proposed method would be helpful for biomechanics and motor control researchers to investigate the manner in which the central nervous system coordinates the gravity torque, resultant joint torque, and interaction torque to control 3D joint rotations.     

A noninvasive technique for the measurement of the energetic state of free‐suspension mammalian cells

A perfusion small‐scale bioreactor allowing on‐line monitoring of the cell energetic state was developed for free‐suspension mammalian cells. The bioreactor was designed to perform in vivo nuclear magnetic resonance (NMR) spectroscopy, which is a noninvasive and nondestructive method that permits the monitoring of intracellular nutrient concentrations, metabolic precursors and intermediates, as well as metabolites and energy shuttles, such as ATP, ADP, and NADPH. The bioreactor was made of a 10‐mm NMR tube following a fluidized bed design. Perfusion flow rate allowing for adequate oxygen supply was found to be above 0.79 mL min^?1 for high‐density cell suspensions (10⁸ cells). Chinese hamster ovary (CHO) cells were studied here as model system. Hydrodynamic studies using coloration/decoloration and residence time distribution measurements were realized to perfect bioreactor design as well as to determine operating conditions bestowing adequate homogeneous mixing and cell retention in the NMR reading zone. In vivo ³¹P NMR was performed and demonstrated the small‐scale bioreactor platform ability to monitor the cell physiological behavior for 30‐min experiments. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

A biomechanical model for flexion torques of human arm muscles as a function of elbow angle

The contribution that a muscle makes to a torque in a certain direction depends among other things on the length and on the mechanical advantage of the muscle. In this study a simple model is presented which enables us to calculate the torques exerted by elbow flexor muscles as a function of elbow angle. The model is tested and verified with a method of spike triggered averaging.     

Optimal electrode placement for noninvasive electrical stimulation of human abdominal muscles.

Abdominal muscles are the most important expiratory muscles for coughing. Spinal cord-injured patients have respiratory complications because of abdominal muscle weakness and paralysis and impaired ability to cough. We aimed to determine the optimal positioning of stimulating electrodes on the trunk for the noninvasive electrical activation of the abdominal muscles. In six healthy subjects, we compared twitch pressures produced by a single electrical pulse through surface electrodes placed either posterolaterally or anteriorly on the trunk with twitch pressures produced by magnetic stimulation of nerve roots at the T(10) level. A gastroesophageal catheter measured gastric pressure (Pga) and esophageal pressure (Pes). Twitches were recorded at increasing stimulus intensities at functional residual capacity (FRC) in the seated posture. The maximal intensity used was also delivered at total lung capacity (TLC). At FRC, twitch pressures were greatest with electrical stimulation posterolaterally and magnetic stimulation at T(10) and smallest at the anterior site (Pga, 30 +/- 3 and 33 +/- 6 cm H(2)O vs. 12 +/- 3 cm H(2)O; Pes 8 +/- 2 and 11 +/- 3 cm H(2)O vs. 5 +/- 1 cm H(2)O; means +/- SE). At TLC, twitch pressures were larger. The values for posterolateral electrical stimulation were comparable to those evoked by thoracic magnetic stimulation. The posterolateral stimulation site is the optimal site for generating gastric and esophageal twitch pressures with electrical stimulation.     

Reproducibility and responsiveness of a noninvasive EMG technique of the respiratory muscles in COPD patients and in healthy subjects.

In the present study, we assessed the reproducibility and responsiveness of transcutaneous electromyography (EMG) of the respiratory muscles in patients with chronic obstructive pulmonary disease (COPD) and healthy subjects during breathing against an inspiratory load. In seven healthy subjects and seven COPD patients, EMG signals of the frontal and dorsal diaphragm, intercostal muscles, abdominal muscles, and scalene muscles were derived on 2 different days, both during breathing at rest and during breathing through an inspiratory threshold device of 7, 14, and 21 cm H2O. For analysis, we used the logarithm of the ratio of the inspiratory activity during the subsequent loads and the activity at baseline [log EMG activity ratio (EMGAR)]. Reproducibility of the EMG was assessed by comparing the log EMGAR values measured at test days 1 and 2 in both groups. Responsiveness (sensitivity to change) of the EMG was assessed by comparing the log EMGAR values of the COPD patients to those of the healthy subjects at each load. During days 1 and 2, log EMGAR values of the diaphragm and the intercostal muscles correlated significantly. For the scalene muscles, significant correlations were found for the COPD patients. Although inspiratory muscle activity increased significantly during the subsequent loads in all participants, the COPD patients displayed a significantly greater increase in intercostal and left scalene muscle activity compared with the healthy subjects. In conclusion, the present study showed that the EMG technique is a reproducible and sensitive technique to assess breathing patterns in COPD patients and healthy subjects.     

Age causes a redistribution of joint torques and powers during gait.

At self-selected walking speeds, elderly compared with young adults generate decreased joint torques and powers in the lower extremity. These differences may be actual gait-limiting factors and neuromuscular adaptations with age or simply a consciously selected motor pattern to produce a slower gait. The purpose of the study was to compare joint torques and powers of young and elderly adults walking at the same speed. Twelve elderly and fourteen young adults (ages 69 and 21 yr) walked at 1.48 m/s over a force platform while being videotaped. Hip, knee, and ankle torques and powers were calculated from the reaction force and kinematic data. A support torque was calculated as the sum of the three joint torques. Extensor angular impulse during stance and positive work at each joint were derived from the torques and powers. Step length was 4% shorter and cadence was 4% higher in elderly adults (both P < 0.05) compared with young adults. Support angular impulse was nearly identical between groups, but elderly adults had 58% greater angular impulse and 279% more work at the hip, 50% less angular impulse and 39% less work at the knee, and 23% less angular impulse and 29% less work at the ankle compared with young adults (t-test, all P < 0.05). Age caused a redistribution of joint torques and powers, with the elderly using their hip extensors more and their knee extensors and ankle plantar flexors less than young adults when walking at the same speed. Along with a reduction in motor and sensory functions, the natural history of aging causes a shift in the locus of function in motor performance.     

Use of ultrasound to make noninvasive in vivo measurement of continuous changes in human muscle contractile length.

Continuous measurement of contractile length has been traditionally achieved using animal preparations in which the muscle and tendon are exposed. More modern methods, e.g., sonomicroscopy, are still invasive. There is a widely perceived need for a noninvasive, in vivo method of measuring continuous changes of human muscle contractile length. Ultrasonography has been used for several years to measure relatively static, discrete changes in tendon, aponeurosis, and muscle fascicle length. We have recently developed this technique to continuously track changes in muscle contractile length during quiet standing. Here, we present the tracking algorithm and use externally applied perturbations to establish the spatial and temporal resolution of the technique. Subjects maintained a low level of ankle torque while a pneumatic actuator applied rapid, square-pulse ankle rotations of defined magnitude and 0.2-s duration. Tracked changes in gastrocnemius and soleus contractile length follow the temporal profile of the perturbations and scale progressively (5-400 microm) with the size of the ankle rotation (0.03-0.7 degrees ). In a second experiment, we tracked a wire oscillating in water with known peak to peak amplitudes of 1.5 microm to 8 mm. The ultrasound tracking procedure had near 100% accuracy at all amplitudes for frequencies up to 3 Hz and showed attenuation at higher frequencies consistent with an effective sampling frequency of 12 Hz and sampling time of 80 ms. This noninvasive technique is sensitive, without averaging, to changes as small as 1 microm and is suitable for observing neuromotor activity in posture and locomotion.     

An inertial and magnetic sensor based technique for joint angle measurement

This paper describes the design and evaluation of a miniature kinematic sensor based three dimensional (3D) joint angle measurement technique. The technique uses a combination of rate gyroscope, accelerometer and magnetometer sensor signals. The technique enables 3D inter-segment joint angle measurement and could be of benefit in a variety of applications which require monitoring of joint angles. The technique is not dependent on a fixed reference coordinate system and thus may be suitable for use in a dynamic system such as a moving vehicle. The technique was evaluated by applying it to joint angle measurement of the ankle joint. Experimental results show that accurate measurement of ankle joint angles is achieved by the technique during a variety of lower leg exercises including walking.     

A novel right-heart catheterization technique for in vivo measurement of vascular responses in lungs of intact mice

The present study employed a new right-heart catheterization technique to measure pulmonary arterial pressure, pulmonary arterial wedge pressure, and pulmonary vascular resistance in anesthetized intact-chest, spontaneously breathing mice. Under fluoroscopic guidance, a specially designed catheter was inserted via the right jugular vein and advanced to the main pulmonary artery. Cardiac output was determined by the thermodilution technique, and measured parameters were stable for periods of 相似文献   

Ex vivo thickness measurement of cartilage covering the temporomandibular joint

Articular cartilage covers the temporomandibular joint (TMJ) and provides smooth and nearly frictionless articulation while distributing mechanical loads to the subchondral bone. The thickness of the cartilage is considered to be an indicator of the stage of development, maturation, aging, loading history, and disease. The aim of our study was to develop a method for ex vivo assessment of the thickness of the cartilage that covers the TMJ and to compare that with two other existing methods. Eight porcine TMJ condyles were used to measure cartilage thickness. Three different methods were employed: needle penetration, micro-computed tomography (micro-CT), and histology; the latter was considered the gold standard. Histology and micro-CT scanning results showed no significant differences between thicknesses throughout the condyle. Needle penetration produced significantly higher values than histology, in the lateral and anterior regions. All three methods showed the anterior region to be thinner than the other regions. We concluded that overestimated thickness by the needle penetration is caused by the penetration of the needle through the first layer of subchondral bone, in which mineralization is less than in deeper layers. Micro-CT scanning method was found to be a valid method to quantify the thickness of the cartilage, and has the advantage of being non-destructive.