A “yellow” laccase with “blue” spectroscopic features,from Sclerotinia sclerotiorum

Reported here are the production, purification and characterization of a laccase from the phytophathogenic fungus Sclerotinia sclerotiorum. This laccase is identified by mass spectrometry with a sequence coverage of 74.9% (458/577 AA) revealing that the protein is identical or highly homologous to a predicted oxidoreductase from this species (A7EM18 in the Uniprot database); the closest homologous protein previously isolated from a fungus is the Melanocarpus albomyces, with only 35% identity. The UV–vis spectral features of this laccase classify it as a “yellow” one. The EPR spectrum nevertheless demonstrates resemblance to blue laccases – including the type 1 center not detectable in UV–vis spectra. The presence of type 3 coppers was proven by fluorescence spectrum and by 330 nm band in UV–vis. The purified laccase has an apparent molecular mass of 70 kDa and appears as a monomer. The values of K_M and k_cat were determined for ABTS, 2,6-dimethoxyphenol, p-phenylenediamine and guaicol and are typical of a laccase. The optimal pH value is around 4 except for ABTS, for which activity is linearly increasing with acidity. The high laccase activity in liquid culture makes S. sclerotiorum a useful source of laccase for practical applications.     

A chloride tolerant laccase from the plant pathogen ascomycete Botrytis aclada expressed at high levels in Pichia pastoris

Fungal laccases from basidiomycetous fungi are thoroughly investigated in respect of catalytic mechanism and industrial applications, but the number of reported and well characterized ascomycetous laccases is much smaller although they exhibit interesting catalytic properties. We report on a highly chloride tolerant laccase produced by the plant pathogen ascomycete Botrytis aclada, which was recombinantly expressed in Pichia pastoris with an extremely high yield and purified to homogeneity. In a fed-batch fermentation, 495 mg L⁻¹ of laccase was measured in the medium, which is the highest concentration obtained for a laccase by a yeast expression system. The recombinant B. aclada laccase has a typical molecular mass of 61,565 Da for the amino acid chain. The pI is approximately 2.4, a very low value for a laccase. Glycosyl residues attached to the recombinant protein make up for approximately 27% of the total protein mass. B. aclada laccase exhibits very low K_M values and high substrate turnover numbers for phenolic and non-phenolic substrates at acidic and near neutral pH. The enzyme's stability increases in the presence of chloride ions and, even more important, its substrate turnover is only weakly inhibited by chloride ions (I₅₀ = 1.4 M), which is in sharp contrast to most other described laccases. This high chloride tolerance is mandatory for some applications such as implantable biofuel cells and laccase catalyzed reactions, which suffer from the presence of chloride ions. The high expression yield permits fast and easy production for further basic and applied research.     

Modeling Based Structural Insights into Biodegradation of the Herbicide Diuron by Laccase-1 from Ceriporiopsis subvermispora

The herbicide diuron (3-(3,4-dichlorophenyl)-1,1-dimethylurea) is used in many agricultural crops and non-crop areas worldwide, leading to the pollution of the aquatic environment by soil leaching. White rot fungi and its lignin modifying enzymes, peroxidases and laccases, are responsible for its degradation. Therefore, it is of interest to explore the potential use of Ceriporiopsis subvermispora laccase (CersuLac1) in the biotransformation of this herbicide by using its enzyme laccase. However, the structure of laccase from Ceriporiopsis subvermispora is still unknown. Hence, a model of laccase was constructed using homology modeling. The model was further used to dock p-methylbenzoate in the presence of four copper ions to analyze molecular basis of its binding and interaction. The ligand-protein interaction is stereo-chemically favorable in nature. The presence of the single protonated Lys457 was necessary for catalysis, being coordinated by a cupper ion. The best pose of diuron on CersuLac1 has a theoretical Ki of 2.91 mM. This is comparable to the KM values for laccases from other organisms with similar compounds. Thus, we document the insights for the potential use of laccase from Ceriporiopsis subvermispora in the biotransfrormation of diuron.     

Properties of gallic acid-induced extracellular laccase of Botrytis cinerea

The properties of the extracellular laccase produced by Botrytis cinerea induced by garlic acid are compared with the laccase produced by Botrytis in the presence of grape juice. The extra- and intracellular laccases are compared and found to be very similar.     

Function of laccase in the white-rot fungus Fomes annosus

1. Thioglycolic acid, a Cu-chelating agent, totally inhibited extracellular laccase activity without affecting growth and morphology of Fomes annosus.
2. In the presence of thioglycolic acid Fomes annosus cleaved high molecular weight lignosulfonate with a molecular weight range of 2×10⁶ to 1000. In the absence of thioglycolic acid the polymerizing activity of laccase prevented the detection of lignosulfonate breakdown products.
3. Oxidative polymerization of a lignin monomer, coniferyl alcohol, occurred in the presence but not in the absence of laccase activity.
4. Catechol and guaiacol added to the medium at a concentration of 2 mmol, are normally oxidized by fungal laccase and strongly inhibit growth. Presence of thioglycolic acid prevented the oxidation of these phenols and simultaneously permitted normal growth.

     

Enzymatic surface functionalisation of lignocellulosic materials with tannins for enhancing antibacterial properties

Grafting natural antibacterial phenols onto lignocellulosic materials is an environmentally friendly way of imparting antibacterial properties to the substrates. In the present investigation, wood veneer and pulp were treated with tannins in the presence or absence of laccase. Treatments with hydrolysable tannins significantly improved the antibacterial resistance of veneers and paper made from tannin-treated pulp against a Gram-positive bacterium (Staphylococcus aureus) while a more modest protective effect was observed against a Gram-negative bacterium (Escherichia coli). Condensed tannin improved the antibacterial resistance against S. aureus, albeit less than hydrolysable tannin, but had little effect on E. coli. A cationic condensed tannin derivative bearing a quaternary amino group provided far better resistance to pulp against S. aureus and E. coli than the corresponding unmodified condensed tannin. These findings agree with the minimal inhibitory concentrations (MICs) of the tannins and their reactivities toward laccase as determined by O₂ consumption measurements. Due to a better retention of tannins via covalent bonding, treatments with laccase usually resulted in greater antibacterial effects than those without laccase. LC–MS investigations with monomeric tannin and lignin model compounds showed that covalent bonding of tannin to lignin via radical coupling occurred in the presence of laccase.     

Highly Efficient Production of Laccase by the Basidiomycete Pycnoporus cinnabarinus

An efficient transformation and expression system was developed for the industrially relevant basidiomycete Pycnoporus cinnabarinus. This was used to transform a laccase-deficient monokaryotic strain with the homologous lac1 laccase gene placed under the regulation of its own promoter or that of the SC3 hydrophobin gene or the glyceraldehyde-3-phosphate dehydrogenase (GPD) gene of Schizophyllum commune. SC3-driven expression resulted in a maximal laccase activity of 107 nkat ml⁻¹ in liquid shaken cultures. This value was about 1.4 and 1.6 times higher in the cases of the GPD and lac1 promoters, respectively. lac1-driven expression strongly increased when 25 g of ethanol liter⁻¹ was added to the medium. Accordingly, laccase activity increased to 1,223 nkat ml⁻¹. These findings agree with the fact that ethanol induces laccase gene expression in some fungi. Remarkably, lac1 mRNA accumulation and laccase activity also strongly increased in the presence of 25 g of ethanol liter⁻¹ when lac1 was expressed behind the SC3 or GPD promoter. In the latter case, a maximal laccase activity of 1,393 nkat ml⁻¹ (i.e., 360 mg liter⁻¹) was obtained. Laccase production was further increased in transformants expressing lac1 behind its own promoter or that of GPD by growth in the presence of 40 g of ethanol liter⁻¹. In this case, maximal activities were 3,900 and 4,660 nkat ml⁻¹, respectively, corresponding to 1 and 1.2 g of laccase per liter and thus representing the highest laccase activities reported for recombinant fungal strains. These results suggest that P. cinnabarinus may be a host of choice for the production of other proteins as well.     

Textile dye degrading laccase from Pseudomonas desmolyticum NCIM 2112

A laccase requiring optimum temperature 60 °C, pH 4.0 for the activity and having apparent molecular weight 43,000 Da was purified from Pseudomonas desmolyticum NCIM 2112 by three steps, including heating, anion exchange, and molecular sieve chromatography. The purification fold and yield of laccase obtained through Biogel P100 were 45.75 and 19%, respectively. Staining of native gel with L-dopa showed dark brown color band indicating the presence of laccase. In relation to hydroquinone, the substrate specificity of laccase was in the following order: DAB > o-tolidine > ABTS > L-dopa. The absence of monophenolase activity in eluted fractions conformed that the purified protein is laccase. This laccase showed substrate dependent optimum pH character. Effect of inhibitor and metal ion on enzyme activity was analyzed. UV–vis analysis showed the decolorization of Direct Blue-6, Green HE4B and Red HE7B in the presence of laccase. The FTIR spectral comparison between the control dye sample and the metabolites extracted after decolorization by purified laccase have confirmed degradation of these dyes. This study contributes for the structural requirement of a dye to be degradable by P. desmolyticum laccase and is important in order to optimize potential bioremediation systems for industrial textile process water treatment.     

Purification of a thermostable laccase from Leucaena leucocephala using a copper alginate entrapment approach and the application of the laccase in dye decolorization

Laccase from a tree legume, Leucaena leucocephala, was purified to homogeneity using a quick two-step procedure: alginate bead entrapment and celite adsorption chromatography. Laccase was purified 110.6-fold with an overall recovery of 51.0% and a specific activity of 58.5 units/mg. The purified laccase was found to be a heterodimer (∼220 kDa), containing two subunits of 100 and 120 kDa. The affinity of laccase was found to be highest for catechol and lowest for hydroquinone, however, highest K_cat and K_cat/K_m were obtained for hydroquinone. Purified laccase exhibited pH and temperature optima of 7.0 and 80 °C, respectively. Mn²⁺, Cd²⁺, Fe²⁺, Cu²⁺ and Na⁺ activated laccase while Ca²⁺ treatment increased laccase activity up to 3 mM, beyond which it inhibited laccase. Co²⁺, Hg²⁺, DTT, SDS and EDTA showed an inhibition of laccase activity. The Leucaena laccase was found to be fairly tolerant to organic solvents; upon exposure for 1 h individually to 50% (v/v) each of ethanol, DMF, DMSO and benzene, more than 50% of the activity was retained, while in the presence of 50% (v/v) each of methanol, isopropanol and chloroform, a 40% residual activity was observed. The purified laccase efficiently decolorized synthetic dyes such as indigocarmine and congo red in the absence of any redox mediator.     

Malachite green decolourization and detoxification by the laccase from a newly isolated strain of Trametes sp.

The decolourization and detoxification of the triarylmethane dye Malachite green (MG) by laccase from Trametes sp. were investigated. The laccase decolorized efficiently the dye down to 97% of 50 mg L^?1 initial concentration of MG when only 0.1 U mL^?1 of laccase was used in the reaction mixture. The effects of different physicochemical parameters were tested and optimal decolourization rates occurred at pH 6 and at temperatures between 50 and 60 °C. Decolourization of MG occurred in the presence of metal ions which could be found in textile industry effluent. 1-hydroxybenzotriazole (HBT) affected positively the decolourization of MG. The presence of some phenolic compounds namely ferulic, coumaric, gallic, and tannic acids was found to be inhibiting for the decolourization at a concentration of 10 mM.The effect of laccase inhibitors in the decolourization of MG was tested with l-cysteine, and ethylene diamine tetra-acetic acid (EDTA) at concentrations of 0.1, 1 and 10 mM. It was demonstrated that l-cysteine and EDTA inhibited the decolourization starting from 1 mM concentration. However, for NaCl a concentration of 100 mM was needed for the inhibition of laccase. The decolourization of MG resulted in the removal of its toxicity against Phanerochaete chrysosporium.The stability of the laccase toward temperature and HBT free radicals was also assessed during MG decolourization. It was shown that laccase was stable at 50 °C but in the presence of the laccase mediator HBT, the stability of the enzyme was severely affected resulting in a loss of 50% of the activity after 3 h incubation.     

Laccase Production and Humic Acids Decomposition by Microscopic Soil Fungi

Laccase (para-diphenol:oxygen oxidoreductase, EC 1.10.3.2) is a phenol oxidase widespread in fungi and bacteria. In basidiomycetes, this enzyme is involved in the transformation of lignin and humic substances (HS) in soil. The role of laccases of soil ascomycetes and deuteromycetes in HS degradation is not established, and conditions of the enzyme production have been poorly studied. In the present work soil micromycetes, potential laccase producers, were isolated from typical soils of the forest, steppe, and foreststeppe zones of European Russia by plating on agar media with ABTS (2,2'-azino-bis(3-ethylbenzothiazoline- 6-sulphonic acid, sodium salt)) as the substrate. Their abundance, species composition, conditions of laccase production, and its relation to humic acids (HA) degradation in liquid and solid media were studied. Out of 68 strains isolated, 20 exhibited ABTS oxidation at initial plating on agar media. In pure cultures on agar media, oxidation was less pronounced, but in the presence of HA laccase production by some strains was higher than without HA. Significant and weak extracellular laccase production in liquid medium was observed for Acremonium murorum (Corda) W. Gams Z1710 and Botritis cinerea Pers. ex Fries Z1711, respectively. The level of laccase production by A. murorum was the same without inducers and in the presence of HA, while B. cinerea produced laccase only without inducers. No direct correlation was found between the presence of laccase and/or its activity and ability of the fungi to decolorize (degrade) HA. In liquid media active laccase producer A. murorum caused lower HA decolorization (43%) than B. cinerea (62%) and the fungi lacking extracellular laccase (54–81%). The role of micromycete oxidative systems in HA degradation requires further investigation.     

Extracellular laccase production and its optimization from Arthrospira maxima catalyzed decolorization of synthetic dyes

In the present study laccase production potential of a photosynthetic, non nitrogen fixing cyanobacteria Arthrospira maxima (SAE-25780) was investigated for their probable use in synthetic dye decolorization which poses environmental pollution problem in aquatic bodies. A. maxima (SAE-25780) showed a constitutive production of laccase which increased up to 80% in the presence of inducer guaiacol. The optimal condition for laccase was 30 °C, 10 mM sucrose as a carbon source, 10 mM sodium nitrate as a nitrogen source, and 2 mM copper as metal activator. The partially purified laccase showed 84% and 49% decolorization potential for the two anthroquinonic dyes-Reactive Blue 4 and Remazol Brilliant Blue R, respectively (RBBR) within 96 h without any mediator. Therefore the laccase extracted from A. maxima (SAE-25780) can be used efficiently in bioremediation of synthetic dyes from paper, pulp and textile industries.     

Enhanced resistance of Saccharomyces cerevisiae to vanillin by expression of lacA from Trametes sp. AH28-2

Saccharomyces cerevisiae is affected by the presence of certain phenolic compounds such as vanillin during fermentation of pretreated lignocellulosic hydrolysates. Since vanillin can be polymerized in the presence of laccase into compounds with lower toxicity, the laccase gene, lacA, from Trametes sp. AH28-2 was fused to the α-factor signal sequence and transferred into S. cerevisiae CEN.PK strains for secretory expression. Furthermore, the chaperone gene, KAR2, was overexpressed to promote the translocation of laccase. In the presence of 8 mmol/L vanillin, a shorter lag phase was observed in the lacA gene expressing strains. The vanillin-specific conversion rate of the lacA-expressing strain BSJX0A2 was 0.069 g g⁻¹ biomass h⁻¹, while it was 0.065 g g⁻¹ biomass h⁻¹ in the reference strain.     

Kraft Pulp Biobleaching and Mediated Oxidation of a Nonphenolic Substrate by Laccase from Streptomyces cyaneus CECT 3335

A new laccase (EC 1.10.3.2) produced by Streptomyces cyaneus CECT 3335 in liquid media containing soya flour (20 g per liter) was purified to homogeneity. The physicochemical, catalytic, and spectral characteristics of this enzyme, as well as its suitability for biobleaching of eucalyptus kraft pulps, were assessed. The purified laccase had a molecular mass of 75 kDa and an isoelectric point of 5.6, and its optimal pH and temperature were 4.5 and 70°C, respectively. The activity was strongly enhanced in the presence of Cu²⁺, Mn²⁺, and Mg²⁺ and was completely inhibited by EDTA and sodium azide. The purified laccase exhibited high levels of activity against 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and 2,6-dimethoxyphenol and no activity against tyrosine. The UV-visible spectrum of the purified laccase was the typical spectrum of the blue laccases, with an absorption peak at 600 nm and a shoulder around 330 to 340 nm. The ability of the purified laccase to oxidize a nonphenolic compound, such as veratryl alcohol, in the presence of ABTS opens up new possibilities for the use of bacterial laccases in the pulp and paper industry. We demonstrated that application of the laccase from S. cyaneus in the presence of ABTS to biobleaching of eucalyptus kraft pulps resulted in a significant decrease in the kappa number (2.3 U) and an important increase in the brightness (2.2%, as determined by the International Standard Organization test) of pulps, showing the suitability of laccases produced by streptomycetes for industrial purposes.     

Development of a Saccharomyces cerevisiae Strain with Enhanced Resistance to Phenolic Fermentation Inhibitors in Lignocellulose Hydrolysates by Heterologous Expression of Laccase

To improve production of fuel ethanol from renewable raw materials, laccase from the white rot fungus Trametes versicolor was expressed under control of the PGK1 promoter in Saccharomyces cerevisiae to increase its resistance to phenolic inhibitors in lignocellulose hydrolysates. It was found that the laccase activity could be enhanced twofold by simultaneous overexpression of the homologous t-SNARE Sso2p. The factors affecting the level of active laccase obtained, besides the cultivation temperature, included pH and aeration. Laccase-expressing and Sso2p-overexpressing S. cerevisiae was cultivated in the presence of coniferyl aldehyde to examine resistance to lignocellulose-derived phenolic fermentation inhibitors. The laccase-producing transformant had the ability to convert coniferyl aldehyde at a faster rate than a control transformant not expressing laccase, which enabled faster growth and ethanol formation. The laccase-producing transformant was also able to ferment a dilute acid spruce hydrolysate at a faster rate than the control transformant. A decrease in the content of low-molecular-mass aromatic compounds, accompanied by an increase in the content of high-molecular-mass compounds, was observed during fermentation with the laccase-expressing strain, illustrating that laccase was active even at the very low levels of oxygen supplied. Our results demonstrate the importance of phenolic compounds as fermentation inhibitors and the advantage of using laccase-expressing yeast strains for producing ethanol from lignocellulose.     

New efficient producers of fungal laccases

Two promising strains of laccase producers—Lentinus strigosus 1566 and Steccherinum ochraceum 1833—were found by screening of basidiomycetes. The cultivation conditions increasing the enzyme yield were selected. The maximal laccase activity was observed in the case of submerged cultivation of the mycelium immobilized on polycaproamide fibers in rich media in the presence of 2 mM CuSO₄ in combination with the optimal inducer, namely, 2,6-dimethylphenol for L. strigosus and 2,4-dimethylphenol for S. ochraceum. Under these conditions, the activity of S. ochraceum laccase amounted to 33.1 U/ml and that of L. strigosus, to 186.5 U/ml. Anthracene was transformed with S. ochraceum laccase, and its oxidation to anthraquinone was demonstrated by mass spectrometry.     

Diamination by N-coupling using a commercial laccase

Nuclear diamination of p-hydrobenzoquinones with aromatic and aliphatic primary amines was catalysed by an immobilised commercial laccase, Denilite® II Base, from Novozymes. The amine and the p-hydrobenzoquinone was reacted under mild conditions (at room temperature and at 35 °C) in a reaction vessel open to air in the presence of laccase and a co-solvent to afford, exclusively, the diaminated p-benzoquinone. These compounds may have potential antiallergic, antibiotic, anticancer, antifungal, antiviral and/or 5-lipoxygenase inhibiting activity.     

Enhancement of copper content and specific activity of CotA laccase from Bacillus licheniformis by coexpression with CopZ copper chaperone in E. coli

Copper depletion of bacterial laccases obtained by heterologous expression in Escherichia coli is a common problem in production of these versatile biocatalysts. We demonstrate that coexpression of small soluble copper chaperones can mitigate this problem. The laccase CotA and the copper chaperone CopZ both from Bacillus licheniformis were used as model system. The use of the E. coli BL21(DE3) strain expressing CopZ and CotA simultaneously from two plasmids resulted in an 20% increase in copper occupancy and in 26% higher specific activity. We conclude that not only intracellular copper ion concentration, but also presence of an appropriate copper chaperone influences copper ion insertion into CotA laccase. Moreover, E. coli BL21(DE3) seems to lack such a copper chaperone which can be partially complemented by heterologous expression thereof. The presented system is simple and can routinely be used for improved heterologous production of bacterial laccase in E. coli.     

Effect of different cultivation conditions and inducers on the production of laccase by the litter-dwelling fungal isolate Fusarium incarnatum LD-3 under solid substrate fermentation

The litter-dwelling fungus Fusarium incarnatum LD-3 has been identified as a novel producer of laccase. The present work was oriented towards the optimization of various cultivation conditions for maximizing laccase production under solid substrate fermentation. The process parameters were optimized by the “one factor at a time” approach. Maximum laccsase production was obtained at pH 5.0 and at a temperature of 28 °C with 60 % moisture content using rice bran as a substrate. The laccase production was enhanced in the presence of aromatic inducer, i.e. ortho-dianisidine at a concentration of 0.5 mM. Laccase production was further increased by 52.56 % when the medium was supplemented with 2 % (v/v) alcohol. Among the various amino acids tested as a growth factor and nitrogen source, D-Serine and DL-2 Amino n-butyric acid, DL-Alanine and L-Glycine were found to be the most suitable for laccase production. The highest laccase production (1,352.64 U/g) was achieved under optimized conditions, and was 2.1-fold higher than the unoptimized conditions. Thus, the novel litter-dwelling fungal isolate Fusarium incarnatum LD-3 seems to be an efficient producer of laccase and can be further exploited for biotechnological applications. This is the first report on the optimization of cultivation conditions and inducers for laccase production from Fusarium incarnatum LD-3.