Comparative analysis of yeast PIAS-type SUMO ligases in vivo and in vitro

SUMO/Smt3, a ubiquitin-like modifier, is known to conjugate other proteins and modulate their functions in various processes. Recently, Ull1/Siz1 was discovered as a novel PIAS-type E3 required for septin sumoylation in yeast. We demonstrate here that the second PIAS-type Nfi1/Siz2 is also a SUMO ligase. It interacted with Smt3, SUMO/Smt3 conjugating enzyme Ubc9 and a septin component Cdc3 in the two-hybrid system. The region containing the RING-like domain of Nfi1/Siz2 bound directly to Ubc9 and Cdc3, but not to Smt3. Nfi1/Siz2 stimulated Smt3 conjugation to Cdc3 in vitro. In this in vitro system, Smt3 formed polymeric chains in the presence of higher concentrations of E1 and E2 enzymes. When the lysine(15) residue of Smt3 was substituted with arginine, Smt3 chain-polymerization was abolished. Using this polysumoylation-deficient mutant Smt3, we found that Cdc3 and Nfi1/Siz2 were modified with Smt3 at multiple sites. Finally we found that the C-terminal truncated form of Ull1/Siz1 was mis-localized in vivo, but retained its SUMO ligase activity in vitro. We discuss the regulation of these SUMO ligases in vivo and in vitro.     

SUMO modification of septin-interacting proteins in Candida albicans

The initiation of bud and hyphal growth in the opportunistic fungal pathogen Candida albicans both involve polarized morphogenesis. However, there are many differences including the function of the septin proteins, a family of proteins involved in membrane organization in a wide range of organisms. Septins form a characteristic ring on the inner surface of the plasma membrane at the bud neck, whereas the septins are diffusely localized across emerging hyphal tips. In addition, septin rings are maintained at sites of septum formation in hyphae rather than being disassembled immediately after cytokinesis. The possibility that C. albicans septins are regulated by the small ubiquitin-like protein SUMO was examined in this study because the Saccharomyces cerevisiae septins were shown previously to be modified by SUMO (Smt3p). However, SUMO conjugation to septins was not detected during budding or hyphal morphogenesis in C. albicans. These results are supported by the lack of conserved SUMO consensus motifs between septins from the two organisms even after adjusting the predicted Cdc3p and Cdc12p septin sequences to account for mRNA splicing in C. albicans. Interestingly, a homolog of the Smt3p SUMO was identified in the C. albicans genome, and an epitope tagged version of Smt3p was conjugated to a variety of proteins. Immunofluorescence analysis showed prominent Smt3p SUMO localization at bud necks and sites of septum formation in hyphae similar to the septins. However, Smt3p was primarily detected on the mother cell side of the septin ring. A subset of these Smt3p-modified proteins co-immunoprecipitated with the septin Cdc11p. These results indicate that septin-associated proteins and not the septins themselves are the key target of SUMO modification at the bud neck in C. albicans.     

The SUMO-1 isopeptidase Smt4 is linked to centromeric cohesion through SUMO-1 modification of DNA topoisomerase II

In S. cerevisiae, posttranslational modification by the ubiquitin-like Smt3/SUMO-1 protein is essential for survival, but functions and cellular targets for this modification are largely unknown. We find that one function associated with the Smt3/SUMO-1 isopeptidase Smt4 is to control chromosome cohesion at centromeric regions and that a key Smt3/SUMO-1 substrate underlying this function is Top2, DNA Topoisomerase II. Top2 modification by Smt3/SUMO-1 is misregulated in smt4 strains, and top2 mutants resistant to Smt3/SUMO-1 modification suppress the smt4 cohesion defect. top2 mutants display aberrant chromatid stretching at the centromere in response to mitotic spindle tension and altered chromatid reassociation following microtubule depolymerization. These results suggest Top2 modification by Smt3/SUMO-1 regulates a component of chromatin structure or topology required for centromeric cohesion.     

Trimeric structure of PRL-1 phosphatase reveals an active enzyme conformation and regulation mechanisms

The PRL phosphatases, which constitute a subfamily of the protein tyrosine phosphatases (PTPs), are implicated in oncogenic and metastatic processes. Here, we report the crystal structure of human PRL-1 determined at 2.7A resolution. The crystal structure reveals the shallow active-site pocket with highly hydrophobic character. A structural comparison with the previously determined NMR structure of PRL-3 exhibits significant differences in the active-site region. In the PRL-1 structure, a sulfate ion is bound to the active-site, providing stabilizing interactions to maintain the canonically found active conformation of PTPs, whereas the NMR structure exhibits an open conformation of the active-site. We also found that PRL-1 forms a trimer in the crystal and the trimer exists in the membrane fraction of cells, suggesting the possible biological regulation of PRL-1 activity by oligomerization. The detailed structural information on the active enzyme conformation and regulation of PRL-1 provides the structural basis for the development of potential inhibitors of PRL enzymes.     

Yeast Ulp1, an Smt3-specific protease, associates with nucleoporins

Yeast Smt3 is a ubiquitin-like protein similar to the mammalian SUMO-1. Cdc3, a septin component, is known to be modified by Smt3. The level of this modification was affected by Smt3-specific protease mutation ulp1-ts or overexpression of ULP1. By two-hybrid screening, we isolated 5 UIP (Ulp1 interacting protein) genes. UIP1 was identical to NUP42 encoding a component of the nuclear pore complex (NPC). Gle1, another NPC-associating component, also interacted with Ulp1 in the two-hybrid system and co-immunoprecipitation experiment. Thus Ulp1 associates with nucleoporins and may interact with septin rings in the telophase.     

Structure of the vacuolar adenosine triphosphatases

Vacuolar adenosine triphosphatases (V-ATPases) represent an important class of proton pumps found in endomembrane systems of eucaryotic cells, where they are involved in pH regulation. Progress has been made in the structure determination of this large, membrane-bound multisubunit enzyme complex. Electron microscopy of the V-ATPase has revealed a ball-and-stalk-like structure similar to F1F0-type ATP synthase, to which the V-ATPase is evolutionary related. Aside from the overall structural similarity of the V-ATPase and F-ATP synthase, a number of distinct structural differences exist between the two related enzymes, giving clues to their different function and regulation in the organism.     

Structural model of the UbcH5B/CNOT4 complex revealed by combining NMR, mutagenesis, and docking approaches

The protein CNOT4 possesses an N-terminal RING finger domain that acts as an E3 ubiquitin ligase and specifically interacts with UbcH5B, a ubiquitin-conjugating enzyme. The structure of the CNOT4 RING domain has been solved and the amino acids important for the binding to UbcH5B have been mapped. Here, the residues of UbcH5B important for the binding to CNOT4 RING domain were identified by NMR chemical shift perturbation experiments, and these data were used to generate structural models of the complex with the program HADDOCK. Together with the NMR data, additional biochemical data were included in a second docking, and comparisons of the resulting model with the structure of the c-Cbl/UbcH7 complex reveal some significant differences, notably at specific residues, and give structural insights into the E2/E3 specificity.     

Yeast Ull1/Siz1 is a novel SUMO1/Smt3 ligase for septin components and functions as an adaptor between conjugating enzyme and substrates

SUMO1/Smt3, a ubiquitin-like protein modifier, is known to conjugate to other proteins and modulate their functions in various important processes. Similar to the ubiquitin conjugation system, SUMO/Smt3 is transferred to substrate lysine residues through the thioester cascade of E1 (activating enzyme) and E2 (conjugating enzyme). In our previous report (Takahashi, Y., Toh-e, A., and Kikuchi, Y. (2001) Gene 275, 223-231), we showed that Siz1/Ull1 (YDR409w) of budding yeast, a member of the human PIAS family containing a RING-like domain, is a strong candidate for SUMO1/Smt3 ligase because the SUMO1/Smt3 modification of septin components was abolished in the ull1 mutant and Ull1 associated with E2 (Ubc9) and the substrates (septin components) in immunoprecipitation experiments. Here we have developed an in vitro Smt3 conjugation system for a septin component (Cdc3) using purified recombinant proteins. In this system, Ull1 is additionally required as well as E1 (Sua1.Uba2 complex), E2 (Ubc9), and ATP. A cysteine residue of the RING-like domain was essential for the conjugation both in vivo and in vitro. Furthermore, a region containing the RING-like domain directly interacted with Ubc9 and Cdc3. Thus, this SUMO/Smt3 ligase functions as an adaptor between E2 and the target proteins.     

Identification of a multifunctional binding site on Ubc9p required for Smt3p conjugation

Ubiquitin-like proteins (ub-lps) are conjugated by a conserved enzymatic pathway, involving ATP-dependent activation at the C terminus by an activating enzyme (E1) and formation of a thiolester intermediate with a conjugating enzyme (E2) prior to ligation to the target. Ubc9, the E2 for SUMO, synthesizes polymeric chains in the presence of its E1 and MgATP. To better understand conjugation of ub-lps, we have performed mutational analysis of Saccharomyces cerevisiae Ubc9p, which conjugates the SUMO family member Smt3p. We have identified Ubc9p surfaces involved in thiolester bond and Smt3p-Smt3p chain formation. The residues involved in thiolester bond formation map to a surface we show is the E1 binding site, and E2s for other ub-lps are likely to bind to their E1s at a homologous site. We also find that this same surface binds Smt3p. A mutation that impairs binding to E1 but not Smt3p impairs thiolester bond formation, suggesting that it is the E1 interaction at this site that is crucial. Interestingly, other E2s and their relatives also use this same surface for binding to ubiquitin, E3s, and other proteins, revealing this to be a multipurpose binding site and suggesting that the entire E1-E2-E3 pathway has coevolved for a given ub-lp.     

High resolution crystal structures of human Rab4a in its active and inactive conformations

The Ras-related human GTPase Rab4a is involved in the regulation of endocytosis through the sorting and recycling of early endosomes. Towards further insight, we have determined the three-dimensional crystal structure of human Rab4a in its GppNHp-bound state to 1.6 Angstroms resolution and in its GDP-bound state to 1.8 Angstroms resolution, respectively. Despite the similarity of the overall structure with other Rab proteins, Rab4a displays significant differences. The structures are discussed with respect to the recently determined structure of human Rab5a and its complex with the Rab5-binding domain of the bivalent effector Rabaptin-5. The Rab4 specific residue His39 modulates the nucleotide binding pocket giving rise to a reduced rate for nucleotide hydrolysis and exchange. In comparison to Rab5, Rab4a has a different GDP-bound conformation within switch 1 region and displays shifts in position and orientation of the hydrophobic triad. The observed differences at the S2-L3-S3 region represent a new example of structural plasticity among Rab proteins and may provide a structural basis to understand the differential binding of similar effector proteins.     

Structural insights into the molecular function of human [2Fe-2S] BOLA1-GRX5 and [2Fe-2S] BOLA3-GRX5 complexes

Members of the monothiol glutaredoxin family and members of the BolA-like protein family have recently emerged as specific interacting partners involved in iron-sulfur protein maturation and redox regulation pathways. It is known that human mitochondrial BOLA1 and BOLA3 form [2Fe-2S] cluster-bridged dimeric heterocomplexes with the monothiol glutaredoxin GRX5. The structure and cluster coordination of the two [2Fe-2S] heterocomplexes as well as their molecular function are, however, not defined yet. Experimentally-driven structural models of the two [2Fe-2S] cluster-bridged dimeric heterocomplexes, the relative stability of the two complexes and the redox properties of the [2Fe-2S] cluster bound to these complexes are here presented on the basis of UV/vis, CD, EPR and NMR spectroscopies and computational protein-protein docking. While the BOLA1-GRX5 complex coordinates a reduced, Rieske-type [2Fe-2S]¹⁺ cluster, an oxidized, ferredoxin-like [2Fe-2S]²⁺ cluster is present in the BOLA3-GRX5 complex. The [2Fe-2S] BOLA1-GRX5 complex is preferentially formed over the [2Fe-2S] BOLA3-GRX5 complex, as a result of a higher cluster binding affinity. All these observed differences provide the first indications discriminating the molecular function of the two [2Fe-2S] heterocomplexes.     

Smt3, a SUMO-1 homolog, is conjugated to Cdc3, a component of septin rings at the mother-bud neck in budding yeast.

SMT3 of Saccharomyces cerevisiae is an essential gene encoding a ubiquitin-like protein similar to mammalian SUMO-1. When a tagged Smt3 or human SUMO-1 was expressed from GAL1 promoter, either gene rescued the lethality of the smt3 disruptant. By indirect-immunofluorescent microscopy, the HA-tagged Smt3 was detected mostly in nuclei and also at the mother-bud neck just like septin fibers. Indeed immunoprecipitation experiments revealed that Cdc3, one of septin components, was modified with Smt3. Furthermore, the protein level of the Cdc3-Smt3 conjugate was reduced and the septin rings disappeared in a ubc9-1 mutant at a restrictive temperature, where the Smt3 conjugation system should be defective. Thus, we conclude that Smt3 was conjugated to Cdc3 in septin rings localized at the mother-bud neck. Around the time of cytokinesis the Cdc3-Smt3 conjugate disappeared. We discuss the biological significance of this Smt3 conjugation to a septin component.     

A large data set comparison of protein structures determined by crystallography and NMR: statistical test for structural differences and the effect of crystal packing

The existence of a large number of proteins for which both nuclear magnetic resonance (NMR) and X-ray crystallographic coordinates have been deposited into the Protein Data Bank (PDB) makes the statistical comparison of the corresponding crystal and NMR structural models over a large data set possible, and facilitates the study of the effect of the crystal environment and other factors on structure. We present an approach for detecting statistically significant structural differences between crystal and NMR structural models which is based on structural superposition and the analysis of the distributions of atomic positions relative to a mean structure. We apply this to a set of 148 protein structure pairs (crystal vs NMR), and analyze the results in terms of methodological and physical sources of structural difference. For every one of the 148 structure pairs, the backbone root-mean-square distance (RMSD) over core atoms of the crystal structure to the mean NMR structure is larger than the average RMSD of the members of the NMR ensemble to the mean, with 76% of the structure pairs having an RMSD of the crystal structure to the mean more than a factor of two larger than the average RMSD of the NMR ensemble. On average, the backbone RMSD over core atoms of crystal structure to the mean NMR is approximately 1 A. If non-core atoms are included, this increases to 1.4 A due to the presence of variability in loops and similar regions of the protein. The observed structural differences are only weakly correlated with the age and quality of the structural model and differences in conditions under which the models were determined. We examine steric clashes when a putative crystalline lattice is constructed using a representative NMR structure, and find that repulsive crystal packing plays a minor role in the observed differences between crystal and NMR structures. The observed structural differences likely have a combination of physical and methodological causes. Stabilizing attractive interactions arising from intermolecular crystal contacts which shift the equilibrium of the crystal structure relative to the NMR structure is a likely physical source which can account for some of the observed differences. Methodological sources of apparent structural difference include insufficient sampling or other issues which could give rise to errors in the estimates of the precision and/or accuracy.     

Comparison of solution and crystal structures of maize nonspecific lipid transfer protein: A model for a potential in vivo lipid carrier protein

The three-dimensional solution structure of maize nonspecific lipid transfer protein (nsLTP) obtained by nuclear magnetic resonance (NMR) is compared to the X-ray structure. Although both structures are very similar, some local structural differences are observed in the first and the fourth helices and in several side-chain conformations. These discrepancies arise partly from intermolecular contacts in the crystal lattice. The main characteristic of nsLTP structures is the presence of an internal hydrophobic cavity whose volume was found to vary from 237 to 513 ų without major variations in the 15 solution structures. Comparison of crystal and NMR structures shows the existence of another small hollow at the periphery of the protein containing a water molecule in the X-ray structure, which could play an important structural role. A model of the complexed form of maize nsLTP by α-lysopalmitoylphosphatidylcholine was built by docking the lipid inside the protein cavity of the NMR structure. The main structural feature is a hydrogen bond found also in the X-ray structure of the complex maize nsLTP/palmitate between the hydroxyl of Tyr81 and the carbonyl of the lipid. Comparison of 12 primary sequences of nsLTPs emphasizes that all residues delineating the cavities calculated on solution and X-ray structures are conserved, which suggests that this large cavity is a common feature of all compared plant nsLTPs. Furthermore several conserved basic residues seem to be involved in the stabilization of the protein architecture. Proteins 31:160–171, 1998. © 1998 Wiley-Liss, Inc.     

A novel mammalian Smt3-specific isopeptidase 1 (SMT3IP1) localized in the nucleolus at interphase.

A novel Smt3-specific isopeptidase, SMT3IP1, was cloned using a yeast two-hybrid screen with Smt3b as bait. The clone, named SMT3IP1 (Smt3-specific isopeptidase 1), which bound to Smt3b but not SUMO-1 in the two-hybrid system, was distantly related to budding yeast Saccharomyces cerevisiae Ulp1, human SENP1 or human SUSP1. The catalytic domains in the C-terminal region were very similar, but the N-terminal region was quite different to other enzymes. The cysteine, histidine and asparatic acid residues in the catalytic domains were conserved. SMT3IP1 expressed by the baculovirus-expression system had the ability to cleave SUMO-1 or Smt3b from SUMO-1/RanGAP1 or Smt3b/RanGAP1 conjugates, respectively, and the activity was a little stronger towards the Smt3b conjugate than towards the SUMO-1 conjugate. Furthermore, the enzyme bound more strongly to Smt3a and Smt3b than to SUMO-1 in vitro. The enzyme did not cleave Nedd8 from Nedd8/cullin-1. Nor did it cleave ubiquitin from ubiquitinated p53. SMT3IP1 was localized almost exclusively at the nucleolus during interphase. The N-terminal sequence was responsible for the nucleolar localization of this enzyme. Whether SMT3IP1 functions in the nucleolus or just stays there before it functions in the nucleus, as shown in the case of CDC14 phosphatase, remains to be elucidated.