Visualization of alginate-poly-L-lysine-alginate microcapsules by confocal laser scanning microscopy

Confocal laser scanning microscopy (CLSM) was used to study the distribution of polymers and cross-linking ions in alginate-poly-L-lysine (PLL) -alginate microcapsules made by fluorescent-labeled polymers. CLSM studies of Ca-alginate gel beads made in the presence and absence of non-gelling sodium ions revealed a more inhomogeneous distribution of alginate in beads formed in the absence of non-gelling ions. In the formation of alginate-PLL capsules, the polymer gradients in the preformed gel core were destabilized by the presence of non-gelling ions in the washing step and in the PLL solution. Ca-alginate gels preserved the inhomogeneous structure by exposure to ion-free solution in contrast to exposure to non-gelling ions (Na(+)). By exchanging Ca(2+) with Ba(2+) (10 mM), extremely inhomogeneous gel beads were formed that preserved their structure during the washing and exposure to PLL in saline. PLL was shown to bind at the very surface of the alginate core, forming a shell-like membrane. The thickness of the PLL-layer increased about 100% after 2 weeks of storage, but no further increase was seen after 2 years of storage. The coating alginate was shown to overlap the PLL layer. No difference in binding could be observed among coating alginates of different composition. This paper shows an easy and novel method to study the distribution of alginate and PLL in intact microcapsules. As the labeling procedures are easy to perform, the method can also be used for a variety of other polymers in other microencapsulation systems.     

Simultaneous multi-parameter observation of Harringtonine-treating HL-60 cells with both two-photon and confocal laser scanning microscopy

Harringtonine (HT), a kind of anticancer drug isolated from Chinese herb-Cephalotaxus hainanensis Li, can induce apoptosis in promyelocytic leukemia HL-60 cells. With both two-photon laser scanning microscopy and confocal laser scanning microscopy in combination with the fluorescent probe Hoechst 33342, tetramethyrhodamine ethyl ester (TMRE) and Fluo 3-AM, we simultaneously observed HT-induced changes in nuclear morphology, mitochondrial membrane potential and intracellular calcium concentration ([Ca2+]i) in HL-60 cells, and developed a real-time, sensitive and invasive method for simultaneous multi-parameter observation of drug- treating living cells at the level of single cell.     

Novel dye for detection of callus embryo by confocal laser scanning fluorescence microscopy

In the present study a new luminescent dye 3‐N‐(2‐pyrrolidinylacetamido)benzanthrone (AZR) was synthesized. Spectroscopic measurements of the novel benzanthrone 3‐aminoderivative were performed in seven organic solvents showing strong fluorescence. The capability of the prepared dye for visualization has been tested on flax, red clover and alfalfa to determinate the embryo in plant callus tissue cultures. Callus cells were stained with AZR and further analysed utilizing confocal laser scanning fluorescence microscopy. Performed experiments show high visualization effectiveness of newly synthesized fluorescent dye AZR that is efficient in fast and relatively inexpensive diagnostics of callus embryos that are problematic due to in vitro culture specificity.     

Visualising fouling of a chromatographic matrix using confocal scanning laser microscopy

Confocal scanning laser microscopy (CSLM) was used to visualise the spatial location of foulants during the fouling of Q Sepharose FF matrix in finite batch experiments and for examining the subsequent effectiveness of clean-in-place (CIP) treatments in cleaning the heavily fouled beads. Beads were severely fouled with partially clarified E. coli homogenate by contacting the beads with the foulant for contact times of 5 min, 1 or 12 h. The use of two different fluorescent dyes, PicoGreen and Cy5.5, for labelling genomic PicoGreen-labelled dsDNA and protein respectively, allowed the direct observation of the chromatographic beads. The extent of fouling was assessed by measuring the subsequent adsorption of Cy5.5-labelled BSA to the beads. Control studies established that the labelling of BSA did not affect significantly the protein properties. In the control case of contacting the unfouled matrix with Cy5.5-labelled BSA, protein was able to penetrate the entire matrix volume. After fouling, Cy5.5-labelled BSA was unable to penetrate the bead but only to bind near the bead surface where it slowly displaced PicoGreen-conjugated dsDNA, which bound only at the exterior of the beads. Labelled host cell proteins bound throughout the bead interior but considerably less at the core; suggesting that other species might have occupied that space. The gross levels of fouling achieved drastically reduced the binding capacity and maximum Cy5.5-labelled BSA uptake rate. The capacity of the resin was reduced by 2.5-fold when incubated with foulant for up to 1 h. However, when the resin was fouled for a prolonged time of 12 h a further sixfold decrease in capacity was seen. The uptake rate of Cy5.5-labelled BSA decreased with increased fouling time of the resin. Incubating the fouled beads in 1 M NaCl dissociated PicoGreen-labelled dsDNA from the bead exterior within 15 min of incubation but proved ineffective in removing all the foulant protein. Cy5.5-labelled BSA was still unable to bind beyond the outer region of the beads. A harsher CIP treatment of 1 M NaCl dissolved in 1 M NaOH was also ineffective in removing all the foulant protein but did remove PicoGreen-conjugated dsDNA within 15 min of incubation. Cy5.5-labelled BSA was able to bind throughout the bead interior after this more aggressive CIP treatment but at a lower capacity than in the case of fresh beads. The competitive adsorption of BacLight Red-labelled whole cells or cell debris and PicoGreen-conjugated dsDNA was also visualised using CSLM.     

Competitive adsorption of labeled and native protein in confocal laser scanning microscopy

Confocal laser scanning microscopy has been previously applied to the study of protein uptake in porous chromatography resins. This method requires labeling the protein with a fluorescent probe. The labeled protein is then diluted with a large quantity of native protein so that the fluorescence intensity is a linear function of the labeled protein concentration. Ideally, the attachment of a fluorescent probe should not affect the affinity of the protein for the stationary phase; however, recent experimental work has shown that this assumption is difficult to satisfy. In the present study, we present a mathematical model of protein diffusion and adsorption in a single adsorbent particle. The differences in adsorption behavior of labeled and native protein are accounted for by treating the system as a two-component system (labeled and native protein) described by the steric mass action isotherm (SMA). SMA parameters are regressed from experimental linear gradient elution data for lysozyme and lysozyme-dye conjugates (for the fluorescent dyes Cy3, Cy5, Bodipy FL, and Atto635). When the regressed parameters are employed in the model, an overshoot in the labeled lysozyme concentration is predicted for Cy5- and Bodipy-labeled lysozyme, but not for Atto635-labeled lysozyme. The model predictions agree qualitatively well with recent work showing the dependence of the concentration overshoot on the identity of the attached dye and provide further evidence that the overshoot is likely caused by the change of binding characteristics due to the fluorescent label.     

Fluorescent stains for quantification of DNA by confocal laser scanning microscopy in 3-D

Confocal microscopy requires the use of fluorophores to visualize structures of interest within a specimen. To perform reliable measurements of the intensity of fluorescence, the stain should be specific, penetrate well into tissue sections, and bind stoichiometrically. Furthermore, emission must be linear with respect to DNA content and brightness, and fluorescence should be stable. Confocal microscopy is used to determine DNA ploidy and to analyze texture of nuclei, which is accomplished in three dimensions, because nuclei can be measured within the original tissue context. For this purpose the sample must be stained with a DNA binding fluorophore with the properties described above. Stains with different properties have been developed for different applications. We review here the advantages and disadvantages of these different stains for analyzing DNA ploidy and nuclear texture using three-dimensional microscopy. We conclude that SYBR green I and TO-PRO-3 are the most suitable stains for this purpose at present.     

DNA-fluorescence of mammalian intra-nucleolar chromatin detected by confocal laser scanning microscopy (CLSM)

The complex spatial DNA distribution in the mammalian interphase nucleus was investigated in Feulgen stained thick sections through mouse trophoblast giant nuclei after Lowicryl embedding. DNA-fluorescence was visualized using confocal laser scanning microscopy. Our results show that the spatial arrangement of major interphase chromatin areas can be precisely documented, including the distribution of small intra-nucleolar chromatin zones.     

Structural analysis of microparticles by confocal laser scanning microscopy

This study demonstrates the potential of conforcal laser scanning microscopy (CLSM) as a characterization tool for different types of microparticles. Microparticles were prepared by various methods including complex coacervation, spray drying, double emulsion solvent evaporation technique, and ionotropic gelation. Protein drugs and particle wall polymers were covalently labeled with a fluorescent marker prior to particle preparation, while low molecular weight drugs were labeled by mixing with a fluorescent marker of similar solubility properties. As was demonstrated in several examples, CLSM allowed visualization of the polymeric particle wall composition and detection of heterogeneous polymer distribution or changes in polymer matrix composition under the influence of the drug. Furthermore, CLSM provides a method for three-dimensional reconstruction and image analysis of the microparticles by imaging several coplanar sections throughout the object. In conclusion, CLSM allows the inspection of internal particle structures without prior sample destruction. It can be used to localize the encapsulated compounds and to detect special structural details of the particle wall composition.     

Osmotic water permeability measurements using confocal laser scanning microscopy

 We have developed a method for measurement of plasma membrane water permeability (P _f) in intact cells using laser scanning confocal microscopy. The method is based on confocal recording of the fluorescence intensity emitted by calcein-loaded adherent cells during osmotic shock. P _f is calculated as a function of the time constant in the fluorescence intensity change, the cell surface-to-volume ratio and the fractional content of the osmotically active cell volume. The method has been applied to the measurement of water permeability in MDCK cells. The cells behaved as linear osmometers in the interval from 100 to 350 mosM. About 57% of the total cell volume was found to be osmotically inactive. Water movement across the plasma membrane in intact MDCK cells was highly temperature dependent. HgCl₂ had no effect on water permeability, while amphotericin B and DMSO significantly increased P _f values. The water permeability in MDCK cells transfected with aquaporin 2 was an order of magnitude higher than in the intact MDCK cell line. The water permeability of the nuclear membrane in both cell lines was found to be unlimited. Thus the intranuclear fluid belongs to the osmotically active portion of the cell. We conclude that the use of confocal microscopy provides a sensitive and reproducible method for measurement of water permeability in different types of adherent cells and potentially for coverslip-attached tissue preparations. Received: 12 June 1999 / Revised version: 21 February 2000 / Accepted: 25 February 2000     

The musculature of Squatinella rostrum (Milne, 1886) (Rotifera: Lepadellidae) as revealed by confocal laser scanning microscopy with additional new data on its trophi and overall morphology

Wilts, E.F., Wulfken, D., Ahlrichs, W.H. and Martínez Arbizu, P. 2012. The musculature of Squatinella rostrum (Milne, 1886) (Rotifera: Lepadellidae) as revealed by confocal laser scanning microscopy with additional new data on its trophi and overall morphology.—Acta Zoologica (Stockholm) 93 : 14–27. The monogonont rotifer Squatinella rostrum was investigated with light, scanning electron and confocal laser scanning microscopy to reveal new morphological data on its inner and outer anatomy. In total, the visualized somatic musculature displays five paired longitudinal muscles (musculi longitudinales I–V) and nine circular muscles (musculi circulares I–IX). Compared to other species, S. rostrum is characterized by the absence of several longitudinal and circular muscles (e.g. musculus longitudinalis capitis, corona sphincter and pars coronalis). A reconstruction of the mastax musculature revealed a total number of seven paired and two unpaired mastax muscles. Possibly homologous somatic and mastax muscles in other, thus far investigated rotifers are discussed. Moreover, we provide a phylogenetic evaluation of the revealed morphological characters and suggest possible autapomorphic characters supporting Squatinella and Lepadellidae. Finally, we refer to some striking similarities in the morphology, ecology and way of movement of Squatinella and Bryceella that may indicate a closer relationship of both taxa.     

Peroxisomal ghosts are intracellular structures distinct from lysosomal compartments in Zellweger syndrome: a confocal laser scanning microscopy study

Peroxisome ghosts are aberrant peroxisomal structures found in cultured skin fibroblasts from patients affected by Zellweger Syndrome (ZS), a genetic disorder of peroxisomal assembly. They contain peroxisomal integral membrane proteins (PxIMPs) and they lack most of the matrix enzymes that should be inside the organelle (Santos et al., Science 239 (1988) 1536-1538). Considerable evidence indicates that these ghosts result from genetic defects in the cellular machinery for importing newly-synthesized peroxisomal proteins into the organelle. In contrast to these observations, (Heikoop et al., Eur. J. Cell Biol. 57 (1992) 165-171) report that in Zellweger Syndrome, peroxisomal membranes are located within lysosomes and/or contain lysosomal enzymes. We have undertaken a more detailed and systematic investigation of this matter, employing confocal laser scanning microscopy (CLSM). In fibroblasts derived from ZS patients belonging to different complementation groups, peroxisomes were labeled with antibodies against PxIMPs and lysosomes were labeled with an antibody against a lysosome associated membrane protein (LAMP-2) or with LysoTracker. The results unambiguously demonstrated no appreciable colocalization of PxIMPs and LAMPs (or LysoTracker), indicating that peroxisomal ghosts are distinct subcellular structures, occupying separate subcellular locations.     

A dual fluorescence technique for visualization ofStaphylococcus epidermidis biofilm using scanning confocal laser microscopy

A new dual fluorescence technique is described which, when combined with scanning confocal laser microscopy (SCLM), can be used to visualize the components of biofilm produced byStaphylococcus epidermidis. Chemostat cultures of RP62A (a well-characterized slime-producing strain ofS. epidermidis) were used to produce mature biofilm on polyvinylcholoride (PVC) disks immobilized in a modified Robbins device using a seed and feed model system. Serial horizontal and vertical optical thin sections, as well as three-dimensional computer reconstructions, were obtained onin situ biofilm using the dual fluorescence procedure. Bacteria were visualized by green autofluorescence excited at 488 nm with an Argon laser. Cell-associated and exocellular matrix material (slime) was visualized by red fluorescence excited at 568 nm with a Krypton laser after interaction of the biofilm with Texas Red-labeled wheat germ agglutinin which is a slime-specific lectin marker. Structural analysis revealed that the cocci grew in slime-embedded cell clusters forming distinct conical-shaped microcolonies. Interspersed open channels served to connect the bulk liquid with the deepest layers of the mature, hydrated biofilm which increased overall surface area and likely facilitated the exchange of nutrients and waste products throughout the biofilm. The combined dual fluorescence technique and SCLM is potentially useful as a specific noninvasive tool for studying the effect of antimicrobial agents on the process of biofilm formation and for the characterization of the architecture ofS. epidermidis biofilm formedin vivo andin vitro on medical grade virgin or modified inert polymer surfaces.     

基于高通量共聚焦激光扫描显微镜方法定量分析副溶血性弧菌生物被膜结构

【目的】副溶血性弧菌是水产品中常见的食源性致病菌,生物被膜的形成对副溶血性弧菌的环境生存和传播至关重要。这项工作的目的是评估临床和环境中分离出的44株副溶血性弧菌菌株形成的生物被膜的结构多样性。【方法】该研究基于共聚焦激光扫描显微镜的高通量方法,使用与高分辨率成像兼容的96孔微量滴定板,结合结构分析软件ISA-2来研究生物被膜形成和结构,分析22株食品与22株临床来源的副溶血性弧菌菌株形成的生物被膜结构参数(生物体积、平均厚度、粗糙系数)。【结果】CLSM图像显示,44株副溶血性弧菌菌株在培养48h后能够形成3D结构,进一步比较分析了临床来源菌株与环境来源菌株形成的生物被膜结构异同,发现临床菌株生物被膜的变异系数比环境菌株生物被膜的变异系数小,且同时携带tdh和trh两种毒力因子的菌株生物被膜变异性最小。凝聚层次聚类分析结果显示,副溶血性弧菌生物被膜可以分为致密且表面光滑(39%)、斑驳且表面粗糙(27%)、疏松且表面坑洼(34%),临床菌株易形成致密且表面光滑和斑驳且表面粗糙的生物被膜,而环境菌株易形成致密且表面光滑和疏松且表面坑洼的生物被膜。【结论】该研究深入了解了副溶血性弧菌生物...     

Three-dimensional structure of living chloroplasts as visualized by confocal scanning laser microscopy

Summary The newly developed confocal scanning laser microscope, together with image processing by computer, has been used to obtain three-dimensional information on the organization of grana in chloroplasts in living plant tissue. Chloroplasts are ideally suited for such studies because their pigments show bright autofluorescence. The high-resolution stereo images bridge a gap between classic light microscopy and electron microscopy. Our preliminary observations on several plant species resemble most the early observations of Strugger (1951: Die Strukturordnung im Chloroplasten. Ber Deutsch Bot Ges 64: 69–83) and suggest that the 3-D technique might well be suitable to solve discrepancies in the interpretation of classical light microscopic and electron microscopic observations.Abbreviations 3-D three dimensional - CSLM confocal scanning laser microscopy - DCMU 3-(3,4-dichlorophenyl)-1,1-dimethyl urea - DNA deoxyribonucleic acid     

Cellular localization of a pollen-specific mRNA by in situ hybridization and confocal laser scanning microscopy

Summary The application of confocal laser scanning microscopy together with in situ hybridization experiments in tobacco pollen enabled a detailed localization of a pollen-specific mRNA. The three-dimensional distribution of this specific mRNA over the whole pollen grain was reconstructed by means of optical sections of one specimen.     

Effects of phorbol esters on endothelial cell microfilaments: Laser scanning confocal microscopy and quantitative morphometry of dose dependent changes

Phorbol esters are known to alter microfilaments but it is not clear if the changes correspond to modulation of the phosphoinositide turnover/protein kinase C system. The novel technique of laser scanning confocal epifluorescence was used to study fiber orientation in phorbol ester treated cells. We treated endothelial cells with control agents and agents known to stimulate protein kinase C: 4 alpha-phorbol, phorbol 12-myristate 13-acetate (PMA), phorbol dibutyrate (PDB), or lipopolysaccharide. After incubation with the test agents, the endothelial cell microfilaments were stained with rhodamine pholloidin and viewed by conventional epifluorescence and by laser scanning confocal epifluorescence microscopy. The images obtained by the confocal microscopy corresponded to a thin optical section through the cells, 300 nm or more in thickness. The microfilaments extended predominantly in the plane of focus. After exposure of the cells to phorbol esters, the stress fibers became more nearly parallel in arrangement or were shortened, but remained in the plane of focus. The modification of microfilaments in response to phorbol esters was quantitated by a single blind analysis. In order to compare the morphological changes with a biochemical action of the phorbol esters, we measured phosphoinositide turnover. The dose-dependence of morphological changes was compared and contrasted to the dose-dependent effect of phorbol esters on bradykinin-stimulated phosphoinositide turnover. PMA had about the same EC50 (1-5 nM) for both biochemical and morphological processes. PDB was less potent in inducing the disruption of microfilament structure than in inhibiting phosphoinositide turnover. Lipopolysaccharide was ineffective in inducing a morphological change under these conditions. A simple activation of protein kinase C is insufficient to explain the dose-dependent effects of phorbol esters. Thus a morphometric analysis can help distinguish the potency of cytoskeleton modulators.     

Detection of submicroscopic magnetite particles using reflectance mode confocal laser scanning microscopy

Light microscopy and transmission electron microscopy work at such different scales that some components of cells may be too small to detect using light microscopy but too dispersed among cells within tissues to be discovered using electron microscopy. We have used reflectance mode confocal laser scanning microscopy to detect single-domain magnetite crystals in both live and resin-embedded preparations of magnetotactic bacteria. We show that reflections from bacterial cells are uniquely associated with the magnetite, which underpins the magnetotactic response of the bacteria. En bloc viewing shows that relatively large volumes of material can be searched with sufficient resolution to enable detection of submicroscopic particles. The techniques reported here may be of interest to others wishing to detect submicroscopic objects dispersed in large volumes of tissue.     

Growth and gravitropism of corn roots in solution

Growth and early gravitropic responses of corn roots in solution have been studied using time-lapse photography. Aeration was required for both root growth and gravitropism. The optimum pH for gravitropism was in the range 5 to 6. The bending response seemed to be greater for roots in non-buffered solution than in buffered solution. Fastest growth and maximum curvature occurred with about 0.2 mol m⁻³ Ca²⁺. Under some conditions, the gravitropic response started with apparently negligible time delay after the start of the gravitropic stimulus. This may denote graviperception in or near the elongation zone itself. This mechanism for early but relatively weak gravitropism may help to explain a variety of gravitropic responses such as the ‘early wrong way’ curvature, and the behaviour of roots whose columella cells lack amyloplasts. More rapid bending appears to start at about 20 min, which is consistent with observations on roots in humid air and with the accepted statolith model of perception in the root cap.     

Use of confocal scanning laser microscopy to measure the concentrations of aerial and penetrative hyphae during growth of Rhizopus oligosporus on a solid surface

In order to develop a method for use in investigations of spatial biomass distribution in solid-state fermentation systems, confocal scanning laser microscopy was used to determine the concentrations of aerial and penetrative biomass against height and depth above and below the substrate surface, during growth of Rhizopus oligosporus on potato dextrose agar. Penetrative hyphae had penetrated to a depth of 0.445 cm by 64 h and showed rhizoid morphology, in which the maximum biomass concentration, of 4.45 mg dry wt cm(-3), occurred at a depth of 0.075 cm. For aerial biomass the maximum density of 39.54 mg dry wt (-3) occurred at the substrate surface. For both aerial and penetrative biomass, there were two distinct regions in which the biomass concentration decayed exponentially with distance from the surface. For aerial biomass, the first exponential decay region was up to 0.1 cm height. The second region above the height of 0.1 cm corresponded to that in which sporangiophores dominated. This work lays the foundation for deeper studies into what controls the growth of fungal hyphae above and below the surfaces of solid substrates.