High-performance thin-layer chromatography method for inositol phosphate analysis

A simple and inexpensive high-performance thin-layer chromatography (HPTLC) method for the analysis of inositol mono- to hexakisphosphates on cellulose precoated plates is described. Plates were developed in 1-propanol–25% ammonia solution–water (5:4:1) and substance quantities as low as 100–200 pmol were detected by molybdate staining. Chromatographic mobilities of nucleotides and phosphorylated carbohydrates were also characterized. Charcoal treatment was employed to separate nucleotides from inositol phosphates with similar R_F values prior to HPTLC analysis. Practical application of the HPTLC system is demonstrated by analysis of grain extracts from wild type and low-phytate mutant barley as well as phytate degradation products resulting from barley phytase activity.     

Optimizing conditions for calcium phosphate mediated transient transfection

BackgroundCalcium phosphate mediated transfection has been used for delivering DNA into mammalian cells in excess of 30 years due to its most low cost for introducing recombinant DNA into culture cells. However, multiple factors affecting the transfect efficiency are commonly recognized meanwhile for years, the low transfection efficiency of this approach on higher differentiated and non-tumor cells such as CHO and C2C12 limits its application on research.ResultsIn this paper, we systematically evaluated the possible factors affecting the transfection rate of this approach. Two categories, calcium phosphate–DNA co-precipitation and on-cell treatments were set for optimization of plasmid DNA transfection into CHO and C2C12 cell-lines. Throughout experimentation of these categories such as buffer system, transfection media and time, glycerol shocking and so on, we optimized the best procedure to obtain the highest efficiency ultimately.During calcium phosphate DNA-precipitation, the transfection buffer is critical condition optimized with HBS at pH 7.10 (P = 0.013 compared to HEPES in CHO). In the transfection step, FBS is a necessary component in transfection DMEM for high efficiency (P = 0.0005 compared to DMEM alone), and high concentration of co-precipitated particles applied to cultured cells in combination with intermittent vortexing is also crucial to preserve the efficiency. For 6-well culture plates, 800 µl of co-precipitated particles (11.25 µg/mL of cDNA) in 1 well is the optimal (P = 0.007 compared to 200 µl). For the highest transfection efficiency, the most important condition is glycerol in shock treatment (P = 0.002 compared to no shock treatment in CHO, and P = 0.008 compared to no shock treatment in C2C12) after a 6 h incubation (P = 0.004 compared to 16 h in CHO, and P = 0.039 compared to 16 h in C2C12) on cultured cells.ConclusionsCalcium phosphate mediated transfection is the most low-cost approach to introduce recombinant DNA into culture cells. However, the utility of this procedure is limited in highly-differentiated cells. Here we describe the specific HBS-buffered saline, PH, glycerol shock, vortex strength, transfection medium, and particle concentrations conditions necessary to optimize this transfection method in highly differentiated cells.     

Effect of dietary phosphate on intestinal calcium and phosphate absorption

Intestinal Ca and P absorption was investigated on rachitic chicks raised on diets with a 1% Ca and 0.3% or 1% P contents. 45Ca and 32P absorption was determined by the technique of the isolated gut sac in vivo. In addition, 32P transport was also measured by the everted gut sac procedure in vitro. Treatment with vit. D3 during 7 days increased the 45Ca absorption in animals fed diets containing 0.3% or 1% P. 32P absorption showed an increase after 2 days of treatment and a decrease afterwards. The reduction of 32P absorption was larger in animals fed diet with 1% P. Study of 32P transport with the everted gut sac technique showed an increase after vit. D3 and a loss of intracellular P, regardless the duration of treatment.     

Precipitation of nucleotides by calcium phosphate

Earlier it has been shown that nucleic acids of high molecular weight can be introduced into cells by coprecipitation with calcium phosphate. We have studied the requirements for calcium phosphate coprecipitation of shorter nucleotides. The degree of coprecipitation of dodecanucleotides lacking terminal phosphate varied between 25 and 72%. Tetramers with a 5′-monophosphate were coprecipitated to 29–87% by calcium phosphate. A high content of guanosine residues and an increased number of terminal phosphate groups increased the degree of coprecipitation of nucleotides. The trinucleotide pppA2′p5′A2′p5′A was effectively precipitated by calcium phosphate but the monophosphate and the core structure were not.     

Transport mechanism for calcium and phosphate in ram spermatozoa

Calcium uptake into ejaculated ram spermatozoa is highly enhanced by the addition of extracellular phosphate. Under identical conditions, extracellular calcium stimulates the uptake of phosphate by the cells. Both calcium and phosphate uptake are comparably inhibited by the sulfhydryl reagent mersalyl. The I50 was found to be 6.36 and 10.14 nmol mersalyl per mg protein for phosphate and calcium uptake, respectively. Calcium uptake is inhibited by mersalyl whether phosphate is present or not. Extracellular fructose causes a 5-fold increase in calcium uptake. When fructose and phosphate are present in the cell's medium, there is an additive effect, which indicates that two independent systems are involved in calcium transport into the cell. Ruthenium red, which blocks Ca2+ transport into the mitochondria, causes 70% and 95% inhibition of calcium uptake in the absence or in the presence of fructose, respectively. Ruthenium red does not affect phosphate uptake unless calcium was present in the incubation medium. The stimulatory effect of fructose upon calcium uptake can be mimicked by L-lactate and can be inhibited by the glycolytic inhibitor 2-deoxyglucose. Fructose and L-lactate stimulate mitochondrial respiration in a comparable way. Oligomycin, which inhibits mitochondrial ATP synthesis, does not inhibit Ca2+ uptake. This indicates that ATP is not involved in the mechanism by which mitochondrial respiration stimulates Ca2+ uptake. The calcium channel blocker, verapamil, inhibits Ca2+ uptake in the presence or absence of extracellular phosphate. The phosphate-dependent calcium transport mechanism is more sensitive to verapamil than is the phosphate-independent transporter. In summary, the data indicate that the plasma membrane of mammalian spermatozoa contains a calcium/phosphate symporter, a phosphate-independent calcium carrier and a calcium-independent phosphate carrier.     

Low temperature method for the production of calcium phosphate fillers

Background  

Calcium phosphate manufactured samples, prepared with hydroxyapatite, are used as either spacers or fillers in orthopedic surgery, but these implants have never been used under conditions of mechanical stress. Similar conditions also apply with cements. Many authors have postulated that cements are a useful substitute material when implanted in vivo. The aim of this research is to develop a low cristalline material similar to bone in porosity and cristallinity.     

A biosensor for inorganic phosphate using a rhodamine-labeled phosphate binding protein

A novel biosensor for inorganic phosphate (Pi) has been developed based on the phosphate binding protein of Escherichia coli. Two cysteine mutations were introduced and labeled with 6-iodoacetamidotetramethylrhodamine. When physically close to each other and correctly oriented, two rhodamine dyes interact to form a noncovalent dimer. In this state, they have little or no fluorescence, unlike the high fluorescence intensity of monomeric rhodamine. The labeling sites were so placed that the distance and orientation between the rhodamines change as a consequence of the conformational change associated with Pi binding. This movement alters the extent of interaction between the dyes. The best mutant of those tested (A17C, A197C) gives rise on average to approximately 18-fold increase in fluorescence intensity as Pi binds. The kinetics of interaction with Pi were measured at 10 degrees C. Under these conditions, the fluorescence increase associated with Pi binding has a maximum rate of 267 s-1. The Pi dissociation rate is 6.6 s-1, and the dissociation constant is 70 nM. An application of the sensor is demonstrated for measuring ATP hydrolysis in real time as a helicase moves along DNA. Advantages of the new sensor are discussed, both in terms of the use of a rhodamine fluorophore and the potential of this double labeling strategy.     

Noncovalently linked nuclear localization peptides for enhanced calcium phosphate transfection

The generation of cell lines stably expressing recombinant material is a lengthy process and there has thus been much interest in the use of transient expression systems to rapidly produce recombinant material. To achieve this, the DNA of interest must be delivered into the nucleus of the target cell. The mechanisms by which this process occurs are poorly understood and the efficiency of various methods differs widely. Recently, nuclear localization signals (NLSs) have been investigated to target entry of DNA into the nucleus of mammalian cells. We have used NLSs from the SV40 and Tat antigens mixed with our model luciferase reporter gene plasmid for the transfection of Chinese hamster ovary (CHO) cells using calcium phosphate and FuGNE 6 transfection technology. The nocovalent complexation of NLSs with plasmid DNA before calcium phosphate-mediated transfection resulted in enhanced reporter gene expression with increasing ratios of NLS to plasmid until reaching a mximum. At higher ratios than maximum expression, the expression levels decreased. On the other hand, when using FuGENE 6 reagent NLSs did not enhance reporter gene expression. Cell cycle arrest in G₂/M phase obliterated the effect of the NLS on reporter gene expression when using the calcium phosphate transfection method.     

Integrin-supported fast rate intracellular delivery of plasmid DNA by extracellular matrix protein embedded calcium phosphate complexes

Extracellular matrix (ECM) proteins, such as collagen and fibronectin, play vital roles in development and maintenance of hard tissue (bone or tooth) and are, consequently, thoroughly investigated for construction of biomimetic scaffolds in combination with calcium phosphate (CaP) material (the major component of hard tissue) for bone or dental tissue engineering. Realizing the natural affinity of ECM components toward inorganic constituents of hard tissue, we successfully constructed the nanohybrids of DNA/CaP particles with either collagen 1 or fibronectin, which finally possessed the capability of specific recognition of integrin receptor for being swiftly internalized across the plasma membrane, leading to remarkably high transgene expression in mammalian cells. This new approach with precise receptor-specific delivery as well as 10- to 50-fold enhanced efficiency level compared to the classical one, has immediate applications for basic research and large scale production of recombinant therapeutic proteins and looks promising for gene therapy.     

Surface properties of calcium phosphate particles for self setting bone cements

Calcium phosphate cements (CPC), consist of multicomponent powder mixtures of calcium orthophosphates with grain sizes in the region of 1-20 microm. Due to the small particle sizes surface properties as the zeta potential and adsorption processes play a significant role during manufacturing and application. In the context of this work zeta potentials of different calcium phosphates, like dicalcium phosphate anhydride (DPCA) tetracalcium phosphate (TTCP) and hydroxyapatite were measured in various organic/aqueous media with different pH values. The results show a strong dependency of the zeta potential on the kind of suspension medium used associated with different milling properties. The addition of sodium phosphate leads to a pH value dependent stabilization of the particles in the liquid phase; the zeta potential of the surface increases from about -15 to -18 mV in water and from -35 to -45 mV in 0.05 mol/l sodium phosphate solution. Besides the interaction of particles with various antibiotics was determined on the basis of the zeta potential of the surface. The substances partly cause a tremendous change of the surface load. This is accompanied by a change of the rheological properties of the cement paste, the morphology of the hardened cement matrix and a significant deterioration of the application-relevant properties as setting time or mechanical strength.     

Affinity chromatography for protein isolation.

Thousands of reports concerning protein purification have appeared in the past year, and over 150 of these involved, at least in part, the affinity chromatography process. Immobilized membrane affinity chromatography, temperature-programmed elution, and centrifugal affinity chromatography are among the most significant new techniques amid the myriads of applications in this mature field.