A restriction map of plasmid pDC1 from the filamentous cyanobacterium Nostoc sp. MAC PCC 8009

A plasmid designated pDC1 from the cyanobacterium Nostoc sp. MAC PCC 8009 was incubated with 16 different restriction enzymes, of which 8 cleaved pDC1. Plasmid pDC1 has a single site for ClaI, two sites for each of BglI, EcoRI, EcoRV, and MluI, three sites for HpaI, and four for HindIII. A restriction map of pDC1 for these 7 enzymes was constructed.     

A restriction map of virulence plasmid pVYE439-80 from a serogroup 9 Yersinia enterocolitica strain

A restriction map of the virulence plasmid pVYE439-80, isolated from Yersinia enterocolitica 439-80 (serogroup 9) was constructed for EcoRI, BamHI, SstII, and SmaI. The mapping was done after cloning of about two-thirds of the plasmid in Escherichia coli. The restriction pattern was compared to those obtained with plasmids isolated from Y. enterocolitica strains of serogroups 1, 3, and 5b. The restriction sites are particularly conserved in a region of about 25 kb. This region contains fragments that are also conserved in serogroup 8 strains [J. Heeseman, C. Keller, R. Morawa, N. Schmidt, H. J. Siemens, and R. Lauf (1983) J. Infect. Dis. 147, 107-115] and that were shown, in strains from this serogroup, to encode calcium dependency [D. A. Portnoy, H. Wolf-Watz, I. Bolin, A. B. Beeder, and S. Falkow, (1984) Infect. Immun. 43, 108-114].     

Physical and functional map of the hemolytic plasmid pSU316

A restriction endonuclease analysis of the hemolytic plasmid pSU316 has allowed location of the cleavage sites for the endonucleases BamHI, XbaI, KpnI, BglII, SalGI, EcoRI, and HindIII. Hybridization experiments between pSU316 and pED100 have shown that the tra region of pSU316 lies in a segment comprising part of SalGI fragments S-1 and S-3 and the entire fragment S-4. The positions of other plasmid coded functions, namely the replication functions and α-hemolysin production, have been determined in the physical map.     

Analysis of the R16 plasmid primase gene

The cloned genetic determinant of R16 (IncB) plasmid primase encodes two polypeptides (apparent Mr 240,000 and 175,000), probably products of the same coding sequence of DNA, which are also detectable in extracts of cells carrying the parent plasmid. Deletion analysis and transposon mutagenesis indicate that only about 1.7 kilobase pairs (kb) of the cloned fragment, encoding a truncated polypeptide of 76,000 Da, is necessary for activity. The cloned genetic determinant of the R387 (IncK) plasmid primase, which encodes polypeptides of apparent Mr 270,000 and 200,000, appears to be very similar to the R16 gene except for an additional sequence of approximately 0.65 kb.     

RepFIC, a basic replicon of IncFI plasmids that has homology with a basic replicon of IncFII plasmids

It was found that a DNA segment containing genes for autonomous replication and its control (basic replicon) present in the IncFI plasmid P307 has homology with RepA, a basic replicon present in IncFII plasmids. The basic replicon in P307 is referred to as RepFIC and the homologous basic replicon in IncFII plasmids is referred to as RepFIIA. In 11 other IncFI plasmids studied a region that has homology with RepFIC and RepFIIA was demonstrated. Thus, of the several basic replicons present in IncFI plasmids, RepFIC is evolutionarily related to a basic replicon of IncFII plasmids.     

Characterization of the basic replicons of the chimeric R/Ent plasmid pCG86 and the related Ent plasmid P307

Restriction-enzyme fragments that can replicate autonomously after circularization were isolated from the chimeric R/Ent plasmid pCG86 and the Ent plasmid P307. Two such regions containing a basic replicon were located in each plasmid. One of the basic replicons of P307, RepFIB, is almost identical with one of the basic replicons of pCG86. The other basic replicon in P307, RepFIC, is partly homologous with the second basic replicon in pCG86, RepFIIA/RepFIC. The latter is a hybrid basic replicon and is in addition partly homologous with RepFIIA, a basic replicon present in IncFII R plasmids. By restriction-enzyme mapping and nucleotide-sequence analysis we have determined a site in the hybrid replicon where it ceases to be homologous with the RepFIIA basic replicon contained in the IncFII miniplasmid pSM1. The 2410-bp region of homology with pSM1 corresponds with a segment containing the origin of replication and all the genes responsible for replication control of pSM1.     

A mathematical model for lambda dv plasmid replication: analysis of copy number mutants

A mathematical model based on the molecular control mechanisms for lambda dv plasmid replication in a single Escherichia coli cell has been applied to simulate replication of mutant lambda dv plasmids. Model simulations of changes in repressor level and copy number resulting from mutations in the promoter-operator PROR region are consistent with experimental data. Calculated effects on lambda dv plasmid copy number of oligomer formation and of alternations in termination efficiency at tR1 also agree with experiment. The model has been employed to simulate the influence of cro mutants and of cro and tR1 double mutants on copy number and stable maintenance of lambda dv plasmid copy number. The genetic structure included in formulation of the replicon model provides a framework for relating changes in specific genetic loci on the plasmid with resulting alterations in host-plasmid system function.     

Cloning of the replication and incompatibility regions of a plasmid derived from Rts1

A replication region, consisting of a 1.1-megadalton (Md) EcoRI/HindIII fragment, was isolated from an Rts1 derivative plasmid. This 1.1-Md fragment, designated as mini-Rts1, was ligated to either pBR322 or a nonreplicating DNA fragment specifying a drug resistance, and its replication properties were investigated. The mini-Rts1 plasmid was cured at a high frequency at 42 °C, while it was maintained stably at 37 °C despite it existed in low copy number. These behaviors are quite similar to those of Rts1. By dissecting the pBR322:mini-Rts1 chimeric plasmid with AccI endonuclease, an inc region of 0.34 Md in size was cloned, which expressed incompatibility toward Rts1. Proteins encoded on the mini-Rts1 genome were examined in the minicell system, and one specific product of 35,000 daltons in molecular weight was identified. Any polypeptides specific for the 0.34-Md inc⁺ region within mini-Rts1 were not detected.     

A chemical and physical comparison of ferritin subunit species fractionated by high-performance liquid chromatography

Selected chemical and physical properties were measured for different forms of ferritin subunits which had been separated by reverse-phase high-performance liquid chromatography. Ferritin subunits from porcine spleen behaved, on sodium dodecyl sulfatepolyacrylamide gel electrophoresis, as though they were ~ M_r 2000 larger than equine spleen ferritin, whereas no difference in size was observed by gel chromatography in 6 m guanidinium chloride. All subunit species exhibited similar isoelectric focusing properties. In contrast to previous reports, no carbohydrate could be found associated with any of the isolated subunit species. Thus, the aberrant behavior of the porcine ferritin subunits between the two empirical molecular weight estimation methods appears to be the result of factor(s) other than protein intrinsic charge or covalently attached carbohydrate.     

A simple procedure for large-scale preparation of pure plasmid DNA free from chromosomal DNA from bacteria

A very simple, inexpensive procedure for preparing pure plasmid DNA from bacteria is described. In this method, lysozyme-induced spheroplasts are made in presence of 833 micrograms/ml of ethidium bromide which are then lysed by a mixture of Brij 58 and sodium deoxycholate, and the lysate is centrifuged at 48,000 g for 25 min whereby about 99.9% of total chromosomal DNA is pelleted. From the supernatant containing plasmid DNA, the proteins are removed by phenol extraction and the major part of RNA by CaCl2 precipitation, and finally the small amount of residual RNA is removed by RNase treatment. The average yield of pBR322 DNA from 1 liter of amplified culture by this procedure is 2 to 2.5 mg and the preparation is highly pure, containing only about 0.005% of total yield as chromosomal DNA contaminant. Moreover, the substrate activity and the transforming ability of the plasmid DNA prepared by this method remain unaffected.     

Bone remodelling induced by physical stress is prostaglandin E2 mediated

In vitro cultured bone cells were found to be responsive to hormones and physical forces. A simple device has been developed which enables the direct application of physical forces to tissue culture dishes to which cells are firmly attached. The physical forces created a deformation of the dish. It was found that prostaglandin E₂ synthesis underwent a rapid increase, reaching a maximum after 20 min and then declined. Concurrent with the increase in prostaglandin E₂ was an increase in cyclic AMP production, having a maximum around 15 min. The increase in cyclic AMP was blocked by indomethacin, the prostaglandin E₂ synthesis inhibitor, indicating the dependence of cyclic AMP production on the de novo synthesis of prostaglandin E₂. Prostaglandin E₂ added to cells mimicked the effect of physical forces on the production of cyclic AMP. The increase in cyclic AMP resulted from an early rise in adenyl cyclase activity (within 5 min) and a later (10 min) increase in phosphodiesterase activity. The same physical forces also stimulatedthe incorporation of thymidine into DNA after 24 h. On addition of prostaglandin E₂ the increase in DNA synthesis was also mimicked. Pretreatment of the cells with indomethacin abolished the effect of physical forces on DNA synthesis.The results suggest a stimulus receptor mechanism for physical forces which, like hormonal effectors, are mediated by prostaglandins and stimulate cyclic AMP and DNA synthesis.We believe that physical forces stimulate bone remodelling through such a stimulus receptor system, mediated by prostaglandins.     

Isolation of yeast histone genes H2A and H2B

Analysis of cloned sequences for yeast histone genes H2A and H2B reveals that there are only two copies of this pair of genes within the haploid yeast genome. Within each copy, the genes for H2A and H2B are separated by approximately 700 bp of spacer DNA. The two copies are separated from one another in the yeast genome by a minimum distance of 35-60 kb. Sequence homology between the two copies is restricted to the genes for H2A and H2B; the spacer DNA between the genes is nonhomologous. In both copies, the genes for H2A and H2B are divergently transcribed. In addition, both plasmids code for other nonhistone proteins. Sequences coding for histones H3 and H4 have not been detected in the immediate vicinity of the genes for H2A and H2B.     

The effects of transplantation and regeneration of sensory neurons on a somatotopic map in the cricket central nervous system

The restoration of the cercal afferent projection of crickets was examined after severing the cercal nerve or amputating the cercus and reimplanting it. After either maneuver the sensory neurons regenerated arborizations in the central nervous system (CNS) within about 1 month. In order to assess the role of the pathway taken to the CNS in controlling the growth of the terminal arborization, we transplantated left cerci to the right side of the host. The operation mismatched the mediolateral axes of host and graft tissues. In one-third of the neurons examined, the axon trajectories of the regenerated neurons were altered. The terminal arborizations in these cases were unusual; for example, one neuron arborized in an abnormal area as well as in its normal area. In rare instances this neuron arborized only in incorrect areas of the CNS. Thus, it appears that axon pathway can have an effect on the central structure of sensory neurons. However, in most cases after the surgery, the neurons were able to reach their proper target areas even by circuitous routes. The proximodistal coordinate of the map is isomorphic with sensory neuron age, because the most distal receptors are produced early in postembryonic development and new ones are added proximally at each molt. We tested the possibility that the order of differentiation was critical for generating the afferent projection with two experiments. First, the distal cercus including the distal members of the clavate array was amputated. The specimen regenerated an entire distal cercus including distal clavate receptors. When newly generated, distal neurons were stained, the terminal arbors were identical to the amputated neurons they replaced. In this case, both age and order of arrival were reversed from normal yet the topographic projection pattern was not altered. Second, we transplanted young cerci onto older specimens and then examined the regenerated arbors of the transplanted sensory neuron. The immature neuron arborized in the adult nervous system exactly as the mature homolog. Thus the age of a sensory neuron did not appear to be a controlling variable in the elaboration of a terminal arborization. The significance of these results is discussed in the context of two models for development of orderly neuronal connections.     

Wide host range cloning vectors: a cosmid clone bank of an Agrobacterium Ti plasmid

Plasmids from two virulent strains of Agrobacterium rhizogenes belonging to biotypes 1 and 2 are compared for DNA homology with the nopaline Ti plasmid from Agrobacterium tumefaciens C58 by means of Southern blot hybridizations. We find that both A. rhizogenes plasmids share strong sequence homology with regions of the Ti plasmid that affect oncogenicity of A. tumefaciens C58. The biotype 1 plasmid shows an additional region of homology at approximately the position of the genes responsible for conjugative transfer of pTiC58. Neither A. rhizogenes plasmid shows any detectable homology with the T-DNA of A. tumefaciens C58. Possible analogies between hairy root and crown gall induction are discussed on the basis of the results presented.     

A 37 X 10(3) molecular weight plasmid-encoded protein is required for replication and copy number control in the plasmid pSC101 and its temperature-sensitive derivative pHS1

Nucleotide sequences were determined for a region essential for autonomous replication and partitioning of pSC101, a plasmid whose replication is dependent on the Escherichia coli dnaA gene product. The essential replication region contains one long coding sequence, rep101 , for a protein composed of 316 amino acids, and a polypeptide approximately 37 X 10(3) Mr in size was identified as the rep101 gene product. rep101 is preceded by two inverted repeat sequences, three directly repeated sequences and a region of high A + T content containing a sequence similar to the E. coli oriC consensus sequence. Because the lesions in seven replication-deficient insertion mutants, four mutants with increased copy number and one temperature-sensitive replication mutant occur within rep101 , the rep101 gene product must control pSC101 replication and copy number. par, a region adjacent to the replication region, which functions in stable plasmid inheritance, contains several inverted repeat sequences.     

A functional map of the replicator region of the octopine Ti plasmid

A hybrid plasmid of pUB 110 (Neo^r) and pAB 124 (Tc^r) has been constructed and shown to have a Neo^sTc^r phenotype in Bacillus subtilis. A derivative of this pUB 110:pAB 124 hybrid has been isolated, pAB 324, which has the expected Neo^rTc^r phenotype. A restriction endonuclease cleavage map of pAB 324 was compared to that of the parent hybrid. This showed that pAB 324 contained a minimum of two deletions and one insertion. This insertion (approximately 1.0 Md) has been identified as originating from the Bacillus subtilis chromosome.