Changes in food processing and occlusal dental wear during the early agricultural period in northwest Mexico

Crown dimensions and occlusal surface wear rate and wear plane were evaluated using paired first and second mandibular molars from a sample of 84 Early Agricultural period (1600 B.C.-A.D. 200) skeletons from northwest Mexico. Although this period represents a major shift in subsistence strategies in the Sonoran Desert, from food-foraging to agriculture, archaeological and dental pathology studies have identified this period as one of relative dietary stability. It was therefore predicted that very little variation in occlusal wear would have occurred between the early phase (San Pedro: 1600-800 B.C.) and late phase (Cienega: 800 B.C.-A.D. 200). Comparison of crown diameters identified some phenotypic differences between sexes but not between archaeological phases. Molar occlusal surfaces were then divided into four quadrants, and wear scores recorded for each quadrant. Principle axis analysis was performed between total wear scores of paired, adjacent first and second mandibular molars to assess rate and occlusal wear plane over time. The analysis demonstrated that both wear rate and wear plane increased from the early to the late phase of the Early Agricultural period. These results indicate that although diet may have indeed remained stable during this period in the Sonoran Desert increases in the rate of wear and wear plane may reflect changes in food-processing techniques. It is suggested that more intensive processing of agricultural products during the Cienega phase simultaneously softened the diet to create more tooth-contact wear and introduced more grit to cause faster and more angled wear on the molar occlusal surfaces.     

Factors influencing the anterior component of occlusal force

We hypothesized that the anterior component of occlusal force (ACF) generated by mandibular molars was a function of molar inclination, height of the transverse condylar axis above the occlusal plane, steepness of the occlusal plane, gape, molar root dimensions, interproximal tooth contact force when not biting, and bite force. Our research aim was to identify those biomechanical factors which determine ACF. Mandibular second molars were axially loaded with a 90 N force (10 mm second molar gape) in 15 subjects, and the resulting ACF was measured at the mandibular first molar-second premolar contact using a recording technique based on interproximal frictional forces. Morphologic measurements were obtained from lateral cephalometric radiographs of each subject and included: Frankfort mandibular plane angle, occlusal plane angle, angles formed by the longitudinal axis of the second molar and the occlusal and mandibular planes, perpendicular distance from the top of the condyle to the occlusal plane, and second molar root width and root length. For ten subjects, ACF resulting from axial loads of 50, 100, 150, and 200 N was measured. For ten subjects, ACF resulting from an axial load of 50 N and second molar gapes of 10 mm, 14 mm, 18 mm, and 22 mm were measured. ACF increased with increasing gape and increased proportionally to increasing bite force. Correlation and stepwise regression analyses revealed that ACF varies with interproximal tooth contact force when not biting (contact ‘tightness’) and molar root width (model R² = 0.71, p < 0.01). The hypothesis that ACF is a function of bite force, gape, molar root width, and interproximal contact tightness has been supported, and the hypothesis that ACF is a function of molar inclination, occlusal plane steepness, condylar axis height, and root length was rejected.     

Note on the hominid molar from the Abri des Merveilles at Castel-Merle (Dordogne)

During excavations in 1926 at the Abri des Merveilles at Castel-Merle (Dordogne) a hominid first or second lower molar was discovered associated with a Mousterian industry and a cold climate macrofauna. The molar suffered extensive antemorten wear, but it is otherwise largely intact. With respect to its size, proportions, occlusal morphology, patterns of wear and moderate taurodontism, the tooth is within the ranges of variation of Neandertal lower first and second molars.     

Canine role in dental wear patterns: Macaca nemestrina

A study of variables and patterns in dental wear among 30 individuals in a colony of Macaca nemestrina shows that consideration of age and sex are crucial for understanding differential wear degrees on molar occlusal planes. With advanced age, this species of non-human primate undergoes obliteration of initial morphological characteristics through the gradual erosion of enamel. Wear gradients are differential from PM1-M3 in both sexes. It appears that there is a functional relationship between degrees of occlusal plane wear and the degree of wear on the canines, and that females show a greater degree of wear changes relative to males of equivalent age because of initial differences in canine length and robusticity due to sexual dimorphism. It appears that there is a direct relationship between occlusal wear plane changes and the degree of wear on the canines, with advanced differential wear showing up in individuals in whom years of maxillary canine honing, canine damage, and the normal wear of mastication has reduced dimensions of unworn permanent canines. Other considerations included in this study are the honing functions of the deciduous first mandibular molars and molar cusp height relative to canine function.     

Influence of premolar extraction or non-extraction orthodontic therapy on the angular changes of mandibular third molars

AimTo compare the angular changes of the third molars relative to the occlusal plane and to the second molar long axis in extraction group and compare these changes with a non extraction group.Materials and methodsThe study included pre and post treatment panoramic radiograph records of 90 subjects treated by first premolar extractions and 90 subjects who had been treated with non extraction orthodontic therapy (n = 90). Two angular variables were measured. Firstly, the angle between the long axis of the third molar and the occlusal plane (M3–OP) and secondly, the angle between the long axis of the third molar and the long axis of the second molar (M3–M2). Data were analyzed by paired and student’s t-test.ResultThe analyzed data to assess the changes in the third molar angulation from pretreatment to post treatment did not vary significantly in both the groups (p < 0.05). Both the groups showed decreased angular values. The M3–OP angular difference was (−7.3 ± 2.45) in extraction group as compared to (−5.85 ± 1.77) in non extraction group. The M3–M2 angular difference of (−4.26 ± 3.11) in extraction group and (−2.98 ± 1.74) in non-extraction group was observed.ConclusionExtraction of premolars did not demonstrate considerable changes on the angulation of the third molars. The factors other than premolar extractions may influence the angulation of the third molars.     

Patterns of dental wear in the Lengua Indians of Paraguay

Wear patterns were examined on dental casts of 202 living Lengua Indians from the Chaco area of Paraguay. Consideration was given to the development of the molar helicoidal plane, age-related changes in occlusal attrition, coalescence of dentine exposures, interproximal attrition, and erupted crown height. This study lends support to Osborn's theory of the helicoidal plane development by showing that attrition enhances rather than modifies posteruption molar occlusal planes. The rate of interproximal attrition was found to slow down with the eruption and functional initiation of the third molars. Sinuous and cavo-convex interproximal contact areas that are generated with age, however, appeared to be less abrasion resistant than straight surfaces, hence leading to an increase in interproximal attrition rates with advanced age. Maximum crown height reduction occurred between the ages of 20 and 40 years in central incisors, canines, and first molars. Kruskal-Wallis tests and log linera models failed to demonstrate significant sexually dimorphic or antimeric differences in wear patterns of Lengua teeth.     

Contours of maxillary molars studied in Australian aboriginals

Distances from the central pit to the perimeter of the crown of permanent upper molars were measured on standardized occlusal photographs of dental casts representing 210 male and 181 female Aboriginals from Yuendumu in the Northern Territory of Australia. In both males and females the first molar was the largest tooth but it showed least variability. Variabilities of the distances tended to be greater for radii constructed in the buccolingual direction than for the transverse mesiodistal radii. The most marked size reduction in the molar series from first to third related to the distolingual part of the crown, which was also the most variable region. Size differences between molars in the mesial contour radii were not marked. Sexual dimorphism was evident in most crown radii, being most marked for the second molar.     

Enlarged occlusal surfaces on first molars due to severe attrition and hypercementosis: examples from prehistoric coastal populations of Texas

During an examination of prehistoric samples from the Texas coast, individuals consistently exhibited a suite of traits on the first molars that included severe wear, hypercementosis, and resorption of the buccal margin of the alveolus. The occlusal surface of the tooth was worn below the cervical margin, with the subsequent incorporation of the buccal surface of the buccal roots into the occlusal plane. This expanded occlusal surface, which extends the buccal surface beyond the normal edge of the tooth, is composed of a combination of original enamel, secondary dentin, and cementum. There is a marked rounding of the buccal aspect of the occlusal surface. These conditions were noted in both maxillary and mandibular first molars. The resorption of alveolar bone surrounding the buccal roots resembles resorption associated with periodontal infection and is thought to be the result of severe levels of stress being applied to this portion of the dentition.     

Occlusal molar surfaces in females with Turner's syndrome

The aim of this study was to identify the molar occlusal features in 73 subjects with the Turner's syndrome (TS) and compared to a control group (CG) of 322 healthy females. The occlusal features were scored on dental plaster casts using the Scoring Procedures for Key Morphological Traits of the Permanent Dentition: The Arizona State University Dental Anthropology System (ASU). The results were analyzed through frequency, percentage and chi 2-test. TS subjects have more frequent reduction of cusp number, distolingual cusp on the upper molars and distal cusp on the lower molar, with the consequent reduction of the occlusal surface. Reduced size of occlusal surface and number cusps on upper molars resulted in the transformation of rhomboid occlusal shape into triangular, with the consequent loss of H-shaped groove system (in the upper right first molars H-shaped groove system was significantly less frequently found in TS (p < 0.05); in the upper left second molars H-shaped groove system was significantly less frequently found in TS (p < 0.01). The X-chromosome aneuploidy can cause a decrease in developmental homeostasis, which results in the alteration of apposition of the enamel and in consequently substantial changes of the molar occlusal morphological features.     

Age-related variability in occlusal wear planes

Investigation of two populations of 136 individuals shows several patterns of occlusal wear plane change which are positively correlated with age. For individuals up to the age of 18, there is a characteristic pattern in which the occlusal wear planes of the mandibular teeth are lingually sloped and those of the maxillary dentition buccally sloped, with the exception of the maxillary premolars, which are also lingually sloped. The long axes of the mandibular teeth give them a lingual orientation relative to the maxillary teeth, and the long axes of the maxillary molars, by contrast, are buccally oriented. In the 18-30 age range for all sexes, the mandibular M1 becomes buccally sloped on its occlusal surface while the occlusal wear plane on the maxillary M1 becomes lingually sloped. Later age changes indicate a trend for the mandibular premolars to become buccally sloped, while the wear planes of the maxillary premolars remain lingually sloped. There is a corresponding tendency for the maxillary and mandibular second molars to undergo changes in the initial orientation of the occlusal wear planes.     

Brief communication: Identification reassessment of the isolated tooth Krapina D58 through occlusal fingerprint analysis

High variability in the dentition of Homo can create uncertainties in the correct identification of isolated teeth. For instance, standard tooth identification criteria cannot determine with absolute certainty if an isolated tooth is a second or third maxillary molar. In this contribution, using occlusal fingerprint analysis, we reassess the identification of Krapina D58 (Homo neanderthalensis), which is catalogued as a third maxillary molar. We have hypothesized that the presence/absence of the distal occlusal wear facets can be used to differentiate second from third maxillary molars. The results obtained confirm our hypothesis, showing a significant difference between second and third maxillary molars. In particular we note the complete absence of Facets 7 and 10 in all third molars included in this analysis. The presence of these facets in Krapina D58 eliminates the possibility that it is a third maxillary molar. Consequently it should be reclassified as a second molar. Although this method is limited by the degree of dental wear (i.e., unworn teeth cannot be analyzed) and to individual molars in full occlusion, it can be used for tooth identification when other common criteria are not sufficient to discriminate between second and third maxillary molars. Am J Phys Anthropol 143:306–312, 2010. © 2010 Wiley‐Liss, Inc.     

Geometric morphometric 3D shape analysis and covariation of human mandibular and maxillary first molars

Dental casts of 160 Greek subjects (80 males, 80 females) were scanned by a structured‐light scanner. The upper and lower right first molar occlusal surface 3D meshes were processed using geometric morphometric methods. A total of 265 and 274 curve and surface sliding semilandmarks were placed on the upper and lower molar surfaces, respectively. Principal component analysis and partial least square analysis were performed to assess shape parameters. Molars tended to vary between an elongated and a more square form. The first two principal components (PCs), comprising almost 1/3 of molar shape variation, were related to mesiodistal–buccolingual ratios and relative cusp position. Distal cusps displayed the greatest shape variability. Molars of males were larger than those of females (2.8 and 3.2% for upper and lower molars respectively), but no shape dimorphism was observed. Upper and lower molar sizes were significantly correlated (r² = 0.689). Allometry was observed for both teeth. Larger lower molars were associated with shorter cusps, expansion of the distal cusp, and constriction of the mesial cusps (predicted variance 3.25%). Upper molars displayed weaker allometry (predicted variance 1.59%). Upper and lower molar shape covariation proved significant (RV = 17.26%, P < 0.0001). The main parameter of molar covariation in partial least square axis 1, contributing to 30% of total covariation, was cusp height, in contrast to the primary variability traits exhibited by PC1 and PC2. The aim of this study was to evaluate shape variation and covariation, including allometry and sexual dimorphism, of maxillary and mandibular first permanent molar occlusal surfaces. Am J Phys Anthropol 152:186–196, 2013. © 2013 Wiley Periodicals, Inc.     

Enamel thickness and the helicoidal occlusal plane

In the present study 38 unworn maxillary molars (M¹ = 16, M²= 12, M³ = 10) of modern humans from a Slavic necropolis were sectioned through the mesial cusps in a plane perpendicular to the cervical margin of the crown. Five slightly worn M¹s and one slightly worn M³ were also used thus increasing the total sample to 44, but measurements made on the worn areas were coded as missing values. Seven measurements of enamel thickness as well as the heights of the protocone and the paracone dentine horns were recorded in order to analyze whether changes in these dimensions in anteroposterior direction can be related to the helicoidal occlusal plane. Uni- and multivariate analyses revealed that the distribution of enamel thickness within and between maxillary molars corresponds to a helicoidal occlusal wear pattern. Enamel thickness along the occlusal basin increases from anterior to posterior, which may lead to rapid development of a reverse curve of Monson in first molars when compared to posterior teeth. However, although these overall differences together with the serial, especially delayed eruption pattern of human molars, contribute to the marked expression of the helicoidal occlusal plane in Homo, differences in enamel patterning between molars indicate that a helicoidal plane is a structural feature of the orofacial skeleton. In contrast to first upper molars, second and third molars show absolutely and relatively thicker enamel under the Phase I wear facet of the paracone, i. e., the lingual slope of the paracone, than under the Phase II facet of the protocone, i. e., the buccal slope of that cusp. These proportional differences are most pronounced in M³, as evidenced by uni- and multivariate statistics. It thus appears that the pattern of enamel thickness distribution from M¹ to M³ follows a trend towards providing additional tooth material in areas that are under greater functional demands, that is, corresponding to a lingual slope of wear anteriorly and to a flat or even buccal one posteriorly. In addition, the heights of the dentine horns in anteroposterior direction change in a way that lends support to the hypothesis that the axial inclination of teeth could be one of the most important factors for the development of the helicoidal occlusal plane. Finally, the changes in morphology and enamel thickness distribution from first to third upper molars found in this study suggest that molars could be “specialized” in their function, i. e., from performing proportionally more shearing anteriorly to increased crushing and grinding activities posteriorly. © 1994 Wiley-Liss, Inc.     

Helicoidal plane of dental occlusion

A helicoidal plane of postcanine occlusion has been patchily reported in many recent and fossil dentitions of man, and has been suggested as a taxonomic marker distinguishing between the dentitions of Homo and Australopithecines. The present paper describes the helicoidal plane in 19 out of 23 modern human (probably Indian) worn dentitions, in both gracile and robust Australopithecines and in extant anthropoids. It is suggested that tooth wear converts the plane of occlusion present in little-worn teeth, the Monson curve, into a helicoidal plane when 1) the diet is more abrasive, 2) the enamel is thinner and less abrasion resistant, and 3) a longer time separates the eruption of the three molar teeth in a jaw quadrant. A model demonstrates that during the power stroke of a chewing cycle the working side molars move in much the same direction whether the molar occlusal plan follows a Monson curve or a helicoidal plane. The difference is that in the former case the three molars work at the same time while in the latter case they work in sequence from anterior to posterior, thereby concentrating force on one tooth at a time. Because the occlusal plane changes during the life of individuals consuming an abrasive diet, the condition of most anthropoids and hominids, it is argued that the Monson curve has functional significance not because of its influence on occlusal relations and/or jaw movement but because the molar teeth are embedded in bone roughly perpendicular to it, a direction which resists tilting of the teeth during mastication. It is concluded that the helicoidal plane probably has little if any value as a taxonomic marker.     

陶寺、上马、延庆古代人群臼齿磨耗速率的比较研究

本文采用Scott定义的臼齿磨耗级别系统,对陶寺、上马、延庆三组人牙的第一、第二臼齿磨耗情况进行观察,并通过主轴回归分析对其磨耗速率进行比较和讨论。在经济类型上,陶寺和上马属于农业经济,但陶寺的狩猎在其经济生活中占有一定地位;延庆畜牧业则比较发达。分析表明三组人牙均表现出臼齿磨耗速率下颌快于上颌的特点,而在性别上没有明显差异。在组间差别上,上马组的磨耗速率似略快于其他两组。磨耗速率的组内、组间差异与上下颌牙齿咬合关系、口腔咀嚼生理以及不同经济文化古人群的食物构成等差异有关。     

Enamel thickness of deciduous and permanent molars in modern Homo sapiens

This study presents data on the enamel thickness of deciduous (dm2) and permanent (M1-M3) molars for a geographically diverse sample of modern humans. Measurements were recorded from sections through the mesial cusps of unworn teeth. Enamel is significantly thinner on deciduous than on permanent molars, and there is a distinct trend for enamel to increase in relative thickness from M1 to M3. The relatively thicker enamel of M2s and especially M3s can be related to the overall reduction in size of more distal molar crowns, which has been attained through a differential loss of the dentine component. Enamel tends to be thicker on the protocone than on the paracone, and thicker on the protoconid than on the metaconid, but its distribution is not wholly concordant with models that predict increased thickness as a means by which to counter heavier attritional loss on these "functional" cusps. Indeed, the thickness of enamel tends to be more variable on cusp tips and occlusal surfaces than over the lateral aspects of cusps. The proportionately thicker enamel over the lateral aspects of the protocone and protoconid more likely serves as a means to prolong functional crown life by preventing cusp fracture, rather than being an adaptation to increase the attritional longevity of wear facets. The present data suggest that the human dentition is not predisposed to develop a helicoidal wear plane through the disposition of molar enamel thickness.     

Patterns of molar wear in hunger-gatherers and agriculturalists

Tooth wear records valuable information on diet and methods of food preparation in prehistoric populations or extinct species. In this study, samples of modern and prehistoric hunger-gatherers and agriculturalists are used to test the hypothesis that there are systematic differences in patterns of tooth wear related to major differences in subsistence and food preparation. Flatness of molar wear is compared for five groups in hunger-gatherers (N = 298) and five groups of early agriculturalists (N = 365). Hunger-gatherers are predicted to develop flatter molar wear due to the mastication of tough and fibrous foods, whereas agriculturalists should develop oblique molar wear due to an increase in the proportion of ground and prepared food in the diet. A method is presented for the quantitative measurement and analysis of flatness of molar wear. Comparisons of wear plane angle are made between teeth matched for the same stage of occlusal surface wear, thus standardizing all groups to the same rate of wear. Agriculturalists develop highly angled occlusal wear planes on the entire molar dentition. Their wear plane angles tend to exceed hunger-gatherers by about 10 degrees in advanced wear. Wear plane angles are similar within subsistence divisions despite regional differences in particular foods. This approach can be used to provide supporting evidence of change in human subsistence and to test dietary hypotheses in hominoid evolution.     

Tooth morphology and other aspects of the Teso dentition

The teeth of over 5,000 Teso schoolchildren members of a Nilo-Hamitic tribe in East Africa, were examined for morphological traits. There was a significant difference between the sexes in the number of cusps on the lower first and second molars, in the prevalence of the cusp of Carabelli, and in variability and agenesis of the upper lateral incisor. The results showed that females consistently favoured tooth reduction. There was also a tendency among those possessing extra cusps on one molar to have extra cusps or other molars. Records kept of the prevalence of the tribal custom of extracting lower central incisors indicated that this practise is rapidly dying out. On another group of teeth which had been extracted from adults common variations of root morphology were noted, together with the fissure pattern of the lower molars. Measurements were made of those teeth which were unworn and were not broken down by dental decay, and the lower third molar was found to be the largest tooth of the series. Observations on the pattern of molar tooth wear showed that the buccal as well as the occlusal surface was strongly affected.     

Three-dimensional measurement of the occlusal surfaces of lower first molars of Australian aboriginals

The occlusal surfaces of lower first molars of Australian Aboriginals were measured in three dimensions with the aid of Moiré contourography. Molar cuspal heights in this population were higher than in Japanese (Mongoloid) but lower than in Dutch (Caucasoid) populations. Intercuspal distances were considerably larger than those in the two other populations. Populational differences in occlusal features may influence both craniofacial structures and jaw movements in the three populations. Low correlations between the cuspal heights and the intercuspal distances in the other two populations were also found in this population, indicating that human molar cuspal height is independent of the transverse size of the crown. Mean values for the height of the three principal cusps in lower first molars were less than those in upper ones. However, the height of the hypoconid, which was the highest in the lower molar cusps, showed almost the same mean value as the height of the upper three principal cusps, indicating that the height of the main functional cusp, in both upper and lower first molars, was almost the same.