Properties of an Intracellular Poly(3-hydroxybutyrate) Depolymerase (PhaZ1) from <Emphasis Type="Italic">Rhodobacter spheroides</Emphasis>

The gene of an intracellular poly(3-hydroxybutyrate) (iPHB) depolymerase from Rhodobacter sphaeroides was cloned and sequenced. The nucleotide sequence of the cloned gene was homologous to that of the iPHB depolymerase gene from Ralstonia eutropha H16 (phaZ1 _Reu) and the gene was designated phaZ1 _Rsh. PhaZ1_Rsh was purified from E. coli harboring an expression vector containing phaZ1 _Rsh and its properties were examined. PhaZ1_Rsh degraded amorphous PHB granules, and the 3-hydroxybutyrate tetramer and pentamer, but not crystalline PHB granules. The enzyme activity was inhibited by p-chloromercuribenzoate and Triton X-100. Diisopropylfluorophosphate, phenylmethylsulfonylfluoride, and dithiothreitol had no effect on the activity. A mutant having alanine instead of cysteine at 178 lost the activity. These results show that PhaZ1_Rsh is a quite similar enzyme to PhaZ1_Reu.     

Characterization of new isolated <Emphasis Type="Italic">Ralstonia</Emphasis><Emphasis Type="Italic">eutropha</Emphasis> strain A-04 and kinetic study of biodegradable copolyester poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) production

A new isolated bacterial strain A-04 capable of producing high content of polyhydroxyalkanoates (PHAs) was morphologically and taxonomically identified based on biochemical tests and 16S rRNA gene analysis. The isolate is a member of the genus Ralstonia and close to Ralstonia eutropha. Hence, this study has led to the finding of a new and unexplored R. eutropha strain A-04 capable of producing PHAs with reasonable yield. The kinetic study of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] production by the R. eutropha strain A-04 was examined using butyric acid and γ–hydroxybutyric acid as carbon sources. Effects of substrate ratio and mole ratio of carbon to nitrogen (C/N) on kinetic parameters were investigated in shake flask fed-batch cultivation. When C/N was 200, that is, nitrogen deficient condition, the specific production rate of 3-hydroxybutyrate (3HB) showed the highest value, whereas when C/N was in the range between 4 and 20, the maximum specific production rate of 4-hydroxybutyrate (4HB) was obtained. Thus, the synthesis of 3HB was growth-limited production under nitrogen-deficient condition, whereas the synthesis of 4HB was growth-associated production under nitrogen-sufficient condition. The mole fraction of 4HB units increased proportionally as the ratio of γ–hydroxybutyric acid in the feed medium increased at any value of C/N ratio. Based on these kinetic studies, a simple strategy to improve P(3HB-co-4HB) production in shake flask fed-batch cultivation was investigated using C/N and substrate feeding ratio as manipulating variable, and was successfully proved by the experiments. The nucleotide sequence 1,378 bp reported in this study will appear in the GenBank nucleotide sequence database under accession number EF988626.     

Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

An extracellular polyhydroxybutyrate depolymerase in <Emphasis Type="Italic">Thermus thermophilus</Emphasis> HB8

The thermophilic bacterium Thermus thermophilus HB8 has been characterized as a polyhydroxybutyrate (PHB)-degrading microorganism since it grows efficiently and forms clear zones on agar plates containing PHB as sole carbon source. T. thermophilus extracellular PHB depolymerase was purified to homogeneity using an affinity chromatography protocol. The purified enzyme was estimated to have an apparent molecular mass of 42 kDa. The extracellular PHB depolymerase gene was identified as the TTHA0199 gene product of T. thermophilus HB8. The amino acid sequence of the TTHA0199 gene product shared significant homologies to other carboxylesterases. A catalytic triad was identified consisting of S₁₈₃, E₃₁₀, and H₄₀₅. A pentapeptide sequence (GX₁SX₂G) exists within the molecule, characteristic for PHB depolymerases (lipase box) and for other serine hydrolases. Purified extracellular PHB depolymerase was stable at high temperatures with an optimum activity at pH 8.0. The apparent Km value of the purified enzyme for PHB was 53 μg/ml. As the main product of the enzymic hydrolysis of PHB, the monomer 3-hydroxybutyrate was identified, suggesting that the enzyme acts principally as an exo-type hydrolase.     

Properties of a novel intracellular poly(3-hydroxybutyrate) depolymerase with high specific activity (PhaZd) in Wautersia eutropha H16

A novel intracellular poly(3-hydroxybutyrate) (PHB) depolymerase (PhaZd) of Wautersia eutropha (formerly Ralstonia eutropha) H16 which shows similarity with the catalytic domain of the extracellular PHB depolymerase in Ralstonia pickettii T1 was identified. The positions of the catalytic triad (Ser190-Asp266-His330) and oxyanion hole (His108) in the amino acid sequence of PhaZd deduced from the nucleotide sequence roughly accorded with those of the extracellular PHB depolymerase of R. pickettii T1, but a signal peptide, a linker domain, and a substrate binding domain were missing. The PhaZd gene was cloned and the gene product was purified from Escherichia coli. The specific activity of PhaZd toward artificial amorphous PHB granules was significantly greater than that of other known intracellular PHB depolymerase or 3-hydroxybutyrate (3HB) oligomer hydrolases of W. eutropha H16. The enzyme degraded artificial amorphous PHB granules and mainly released various 3-hydroxybutyrate oligomers. PhaZd distributed nearly equally between PHB inclusion bodies and the cytosolic fraction. The amount of PHB was greater in phaZd deletion mutant cells than the wild-type cells under various culture conditions. These results indicate that PhaZd is a novel intracellular PHB depolymerase which participates in the mobilization of PHB in W. eutropha H16 along with other PHB depolymerases.     

Extracellular production of <Emphasis Type="Italic">Streptomyces exfoliatus</Emphasis> poly(3-hydroxybutyrate) depolymerase in <Emphasis Type="Italic">Rhodococcus</Emphasis> sp. T104: determination of optimal biocatalyst conditions

The phaZ _Sex gene encoding poly(3-hydroxybutyrate) depolymerase from Streptomyces exfoliatus has been successfully cloned and expressed in Rhodococcus sp. T104 for the first time. Likewise, the recombinant enzyme was efficiently produced as an extracellular active form and purified to homogeneity by two hydrophobic chromatographic steps. MALDI-TOF analysis showed that the native enzyme is a monomer. Circular dichroism studies have revealed a secondary structure showing 25.6% α-helix, 21.4% β-sheet, 17.1% β-turns, and 35.2% random coil, with a midpoint transition temperature (T _m) of 55.8 °C. Magnesium and calcium ions enhanced the enzyme activity, whereas manganese inhibited it. EDTA moderately decreased the activity, and the enzyme was completely deactivated at 3 M NaCl. Chemical modification studies indicated the presence of the catalytic triad serine–histidine–carboxylic acid in the active site. High-performance liquid chromatography (HPLC)–mass spectrometry (MS) analysis of PHB products of enzymatic hydrolysis showed monomers and dimers of 3-hydroxybutyric acid, demonstrating that PHB depolymerase is an exo-hydrolase. Addition of methyl-β-cyclodextrin simultaneously increased the activity as well as preserved the enzyme during lyophilization. Finally, thermoinactivation studies showed that the enzyme is highly stable at 40 °C. All these features support the potential industrial application of this recombinant enzyme in the production of (R)-3-hydroxyalkanoic acid derivatives as well as in the degradation of bioplastics.     

Cloning,expression and characterization of a lipase gene (<Emphasis Type="Italic">lip3</Emphasis>) from<Emphasis Type="Italic"> Pseudomonas aeruginosa</Emphasis> LST-03

A lipase gene (lip3) was cloned from the Pseudomonas aeruginosa strain LST-03 (which tolerates organic solvents) and expressed in Escherichia coli. The cloned sequence includes an ORF consisting of 945 nucleotides, encoding a protein of 315 amino acids (Lip3 lipase, 34.8 kDa). The predicted Lip3 lipase belongs to the class of serine hydrolases; the catalytic triad consists of the residues Ser-137, Asp-258, and His-286. The gene cloned in the present study does not encode the LST-03 lipase, a previously isolated solvent-stable lipase secreted by P. aeruginosa LST-03, because the N-terminal amino acid sequence of the Lip3 lipase differs from that of the LST-03 lipase. Although the effects of pH on the activity and stability of the Lip3 lipase, and the temperature optimum of the enzyme, were similar to those of the LST-03 lipase, the relative activity of the Lip3 lipase at lower temperatures (0–35°C) was higher than that of the LST-03 lipase. In the absence of organic solvents, the half-life of the Lip3 lipase was similar to that of the LST-03 lipase. However, in the presence of most of the organic solvents tested in this study (the exceptions were ethylene glycol and glycerol), the stability of the Lip3 lipase was lower than that of the LST-03 lipase.Communicated by H. Ikeda     

Characterization of secreted recombinant <Emphasis Type="Italic">Toxoplasma gondii</Emphasis> surface antigen 2 (SAG2) heterologously expressed by the yeast <Emphasis Type="Italic">Pichia pastoris</Emphasis>

The surface antigen 2 (SAG2) gene of the protozoan parasite, Toxoplasma gondii, was cloned and extracellularly expressed in the yeast Pichia pastoris. The effectiveness of the secreted recombinant SAG2 (rSAG2-S) as a serodiagnosis reagent was assessed by western blots and ELISA. In the western blot assay, rSAG2-S reacted with all Toxoplasma-antibody positive human serum samples but not with Toxoplasma-negative samples. In the ELISA, rSAG2-S yielded sensitivity rates ranging from 80% (IgG negative, IgM positive) to 100% (IgG positive, IgM negative). In vivo experiments showed that serum from mice immunized with rSAG2-S reacted specifically with the native SAG2 of T. gondii. These mice were protected when challenged with live cells of T. gondii.     

Degradation of polyethylene succinate (PES) by a new thermophilic <Emphasis Type="Italic">Microbispora</Emphasis> strain

Thermophilic actinomycetes were isolated from sediment of the Chingshuei hot spring in north Taiwan, and the strain HS 45-1 was selected from colonies which formed distinct clear zones on agar plate with emulsified polyethylene succinate (PES). The film of PES disappeared within 6 days in liquid cultures at 50°C. The strain HS 45-1 was also able to degrade poly (ε-carpolactone) (PCL) and poly (3-hydroxybutyrate) (PHB) films completely within 6 days in liquid cultures. Basing on the results of phynotypic characteristics, phylogenetic studies and DNA-DNA hybridization, strain HS 45-1 should be assigned to Micorbispora rosea subsp. taiwanensis.     

Cloning of a xylanase gene <Emphasis Type="Italic">xyn2A</Emphasis> from rumen fungus <Emphasis Type="Italic">Neocallimastix</Emphasis> sp. GMLF2 in <Emphasis Type="Italic">Escherichia coli</Emphasis> and its partial characterization

Anaerobic fungi belonging to the family Neocallimastigaceae are native inhabitants in the rumen of the most herbivores, such as cattle, sheep and goats. A member of this unique group, Neocallimastix sp. GMLF2 was isolated from cattle feces and screened for its xylanase encoding gene using polymerase chain reaction. The gene coding for a xylanase (xyn2A) was cloned in Escherichia coli and expression was monitored. To determine the enzyme activity, assays were conducted for both fungal xylanase and cloned xylanase (Xyl2A) for supernatant and cell-associated activities. Optimum pH and temperature of the enzyme were found to be 6.5 and 50°C, respectively. The enzyme was stable at 40°C and 50°C for 20 min but lost most of its activity when temperature reached 60°C for 5-min incubation time. Rumen fungal xylanase was mainly released to the supernatant of culture, while cloned xylanase activity was found as cell-associated. Multiple alignment of the amino acid sequences of Xyl2A with published xylanases from various organisms suggested that Xyl2A belongs to glycoside hydrolase family 11.