Chromosomal rearrangements by an IS2 insertion in phage Mu-1

We have isolated and characterized a mutant of temperate phage Mu-1 carrying an IS2 insertion in the middle of its β region. This mutant gives rise spontaneously to secondary mutants which have deletions of different sizes adjacent to IS2. One particular derivative however, was found to have acquired an additional insertion sequence adjacent to IS2. This derivative gave rise to tertiary mutants carryinh a deletion next to the tandem insertion. The tandem insertion was located at the same place in the Mu β region as another 2.6 kb insertion independently isolated by Chow et al. (1977) and was found to be homologous to that insertion. The properties of this particular secondary mutant show that Mu phage particles lacking their S end are defective for growth and lysogenisation.     

Heteroduplex electron microscopy of phage Mu mutants containing IS1 insertions and chloramphenicol resistance transposons.

We have examined by electron microscopy the DNA heteroduplexes of six bacteriophage Mu mutants, Mu X cam, generated by the insertion of the Tn9 transposon for chloramphenicol resistance. Tn9 was found to be 2.8 +/- 0.2 kilobases (kb) in length and to consist of a cam determinant flanked by two IS1 sequences arranged in a direct order. In two of the six Mu X cam mutants, the Tn9 insertion was at a fixed location, 3.9 kb from the left, or c, end. In the other four mutants, the position of the insertion varied, even though the lysogenic cultures induced were grown from single colonies. The insertion was located at either 3.3 kb, 3.9 kb, or, less frequently, at 4.4 kb from the left end of the DNA. Furthermore, at low frequencies, the insertions were found to be in an orientation opposite to what predominated in the preparation. Thus, Tn9 in the Mu X cam mutants examined could appear to undergo rapid rearrangements during Mu growth or over a few generations of cell growth. One of the Tn9 insertion sites was apparently the same as that for a 0.8 kb insertion found in a Mu X mutant. This latter insertion was identified as an IS1 sequence. The DNA molecules from all the Mu X cam mutant phage particles were found to be missing the bacterial DNA at the S (right) end, along with a variable amount of the adjoining Mu DNA in the beta region. This observation supports the headful packaging model for Mu DNA.     

The nucleotide sequence and protein-coding capability of the transposable element IS5

The nucleotide sequence of IS5, a bacterial insertion sequence, has been determined. It is 1195 bp long and contains an inverted terminal repetition of 16 bp with one mismatch. One open reading frame, spanning nearly the entire length of the element, could encode a polypeptide of 338 amino acids. Upon insertion into a DNA segment, IS5 causes a duplication of 4 bp. Based on seven examples, this site of insertion appears to be nonrandom, and the consensus target site sequence is C . T/A . A . G/A (or C/T . T . A/T . G on the opposite strand). The nucleotide sequences of IS5 insertions into the B and cim genes of bacteriophage Mu have allowed tentative identification of the protein-coding frames of B and cim.     

Analysis of transposable elements inserted in the genomes of bacteriophages Mu and P1.

We have examined the genomes of the temperate bacteriophages Mu and P1 and some of their insertion mutants for hybridization with the prokaryotic transposable elements IS1 and IS2. We used the DNA blotting-hybridization technique in which denatured DNA fragments are transferred to nitrocellulose paper directly from agarose gels and hybridized to 32P-labeled probe DNA. The 800 base pair insertion in an X mutant of Mu was found to hybridize with IS1. The chloramphenicol resistance transposon, Tn9, in Mu X cam mutants was found to be located at or close to the sites of IS1 insertion in X mutants; Tn9 also hybridized with IS1. The restriction endonuclease BalI cleaved IS1 once; it cleaved Tn9 in all Mu X cam mutants twice to release a fragment of about 1700 base pairs. These results support the conclusion that Tn9 contains one copy of IS1 at each end. In the P1cam isolate, from which Tn9 was transposed to Mu, BalI made a third cut in Tn9 giving rise to fragments of about 850 base pairs. The data further suggested that Tn9 is present in tandem copies in the P1cam isolate we examined. P1 itself was found to harbor IS1. The two P1 strains tested had a common fragment containing IS1; one strain had an additional copy of IS1. The IS1 element common to the P1 strains was shown to be the site of the Tn9 insertion in the P1cam isolate examined. No hybridization between IS2 and any of the Mu and P1 strains could be detected.     

A new insertion sequence, IS121, is found on the Mu dI1 (Ap lac) bacteriophage and the Escherichia coli K-12 chromosome

We have discovered a new insertion sequence, now designated IS121, as a component of the Mu dI1 (Ap lac) phage. This sequence is 1.2 kilobases long and contains single recognition sites for the HincII, Bg1II, and HindIII restriction endonucleases. IS121 is present in at least three copies in the chromosome of several Escherichia coli K-12 strains. When present in the nonconjugative plasmid pBR322, IS121 can mediate cointegrate formation with an F' lac plasmid and transfer of pBR322 sequences to suitable recipients. IS121 is also capable of precise or nearly precise excision. As part of the study of IS121, we have determined the physical structure of the Mu dI1 (Ap lac) phage and established an extensive restriction endonuclease map of this phage. A revised schema for the formation of the Mu dI1 (Ap lac) phage is presented.     

IS2 insertion is a major cause of spontaneous mutagenesis of the bacteriophage P1: non-random distribution of target sites

Insertion mutations arising spontaneously in the P1 prophage and affecting vegetative phage reproduction were screened for the presence of insertion sequence 2 (IS2). Filter hybridization identified 28 out of 44 independent insertions as IS2. Their target specificity is not random. A region that amounts to < 2% of the phage genome had trapped 15 of the 28 IS2 elements. However, precise mapping of nine mutants in this hot spot segment revealed no preferred insertion site. Rather, the nine IS2 are distributed over the whole target segment and IS2 are found in both orientations. Sequence data indicate that at least two sequence variants of IS2 participated in mutagenesis of the phage genome. The detectable transposition of IS2 from the host chromosome to the prophage occurs with a frequency of 3 x 10(-5) per cell per generation under the particular experimental conditions. It is concluded that IS2, a natural resident of Escherichia coli K12 strains, is an important agent for spontaneous mutagenesis and exerts this action non-randomly along the genome.     

Electron microscope heteroduplex studies of sequence relations among bacterial plasmids: identification and mapping of the insertion sequences IS1 and IS2 in F and R plasmids.

Heteroduplex experiments between the plasmid R6 and one strand of the deoxyribonucleic acid (DNA) of a lambda phage carrying the insertion sequence IS1 show that IS1 occurs on R6 at the two previously mapped junctions of resistance transfer factor (RTF) DNA with R-determinant DNA. From previous heteroduplex experiments, it then follows that IS1 occurs at the same junctions in R6-5, R100-1, and R1 plasmids. Heteroduplex experiments with the DNA from a lambda phage carrying the insertion sequence IS2 show that one copy of IS2 occurs in R6, R6-5, and R100-1 (but not R1) at a point within the RTF with coordinates 67.5 TO 68.9 kilobase units (kb). In an accompanying paper, Ptashne and Cohen (1975) show that the insertion sequence IS3 occurs on R6 and R6-5. R100-25, a traC mutant, differs from its parent R100-1 only in that it contains an additional copy of IS1 inserted within the tra gene region of 82.1 kb. R100-31, atraX, TC-s mutant of R100-1, is deleted in R100-1 sequences starting at one of the IS3 termini (46.9 kb) and extending with RTF to 61.0 kb. Heteroduplex studies of F plasmids with the DNA of a lambda phage bearing insertion sequence IS2 show that the sequence of F with coordinates 16.3-17.6F is IS2. The occurrence of IS1 at the two junctions of R-determinant DNA and RTF DNA in R plasmids provides a structural basis to explain the mechanism of the previously observed formation of molecules containing one RTF unit and several tandem copies of the R-determinant unit, when R plasmids in Proteus mirabilis are grown in the presence of antibiotics, and the segregation of an R plasmid into an RTF unit and an R-determinant unit. In general, correlation of our results with previous studies shows that insertion sequences play a role in a variety of F- and R-related intra- and intermolecular recombination phenomena.     

Characterization of the types of mutational events that spontaneously occur in a plasmid system

The immunity region from a cI857 derivative of bacteriophage lambda has been cloned into the EcoRI site of pBR322 to produce a plasmid that can be used to analyze spontaneous mutagenesis. Cells containing this plasmid are temperature-sensitive for growth unless mutations have occurred that somehow prevent the expression of the kil gene in the lambda fragment at non-permissive temperature. 678 such temperature-resistant mutants from 10 independent subcultures each of 2 different recA- E. coli strains have been collected, and the nature of the plasmid mutations obtained has been analyzed. All of the subcultures contained mutants that allowed growth at the restrictive temperature without showing a detectable change in plasmid size. 75% of the total mutants fell in this class. More than half of these mutations involved the lambda leftward promoter, pL, and such mutants were found in all 20 subcultures. The remaining 25% of the mutations involved a change in plasmid size and mutations of this class were found in 18 of 20 subcultures. 12% of the total mutants (found in 16 of 20 subcultures) had an insertion of IS1 in the region between pL and the lambda kil gene. 6% of the total mutants had undergone an IS1-mediated deletion, while 1% were mixed colonies in which multiple IS1-mediated events had occurred. About 1% of the total mutants had undergone complex IS1-mediated DNA rearrangement(s) that have not yet been characterized. In total, 11 of 20 subcultures yielded isolates where IS1-mediated rearrangements had occurred. The remaining 4% of the mutations included insertions of IS5, IS30, and an IS1 family member that appears to be IS1T as well as IS1T-mediated deletions and deletions that do not appear to have been mediated by any insertion sequence. A mutant with both an IS1 insertion and an alteration involving pL has also been isolated.     

Insertion sequence IS2 associated with int-constitutive mutants of bacteriophage lambda.

We have examined mutations in bacteriophage lambda called int-c, which confer elevated constitutive expression on the int gene for prophage integration. One class of mutations, which map between the b538 and bio386 endpoints, does not appear to be associated with any major chromosomal modification, whereas the second class has the IS2 insertion sequence in orientation II within the region between gene int and the b538 endpoint, All int-c mutations are within gene xis, with the possible exception of int-c548, which might be located between int and xis. The present data are most consistent with the following notion: (1) the point mutations of class one inactivate the tI terminator signal of the pI-tI leader RNA for gene int and thus render int expression independent of the antiterminating action of the cII and cIII products, and (2) the second class of int-c mutants is constitutive for Int because the IS2 insertion, when strategically located between int and tI, provides a new constitutive promoter for int transciption.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

Isolation and analysis of IS6120, a new insertion sequence from Mycobacterium smegmatis

Insertion sequence IS6120 from Mycobacterium smegmatis was identified by its ability to transpose into different sites in the lambda repressor gene, cl857, carried on an Escherichia coli/mycobacteria shuttle plasmid. IS6120 is a novel 1.5 kb insertion sequence, which has 24-bp imperfect terminal inverted repeats and generates 9-bp duplications of the target DNA following insertion. IS6120 is present in at least three copies in M. smegmatis but was not found in other species, including Mycobacterium tuberculosis. Nucleotide sequence analysis revealed that IS6120 contains two open reading frames, one of which encodes a putative transposase with similarities to those found in IS256 from Staphylococcus aureus, IST2 from Thiobacillus ferrooxidans, and ISRm3 from Rhizobium meliloti. The fact that IS6120 does not recognize a consensus target sequence for insertion and has no homologous sequences in the other strains studied makes IS6120 useful for transposon mutagenesis in mycobacteria.     

Synthesis and overproduction of the 5A protein of insertion sequence IS5.

We have demonstrated both the synthesis and overproduction of the 5A protein encoded by the longest open reading frame of the bacterial insertion sequence IS5. Expression was obtained in vitro and in Escherichia coli maxicells from plasmids containing IS5 in either orientation, as well as in vitro from a restriction fragment containing exclusively IS5 DNA. When IS5 was cloned in the appropriate orientation downstream of a strong tac promoter, production of the 5A protein was increased to 10 to 20% of the total protein synthesized in vitro.     

Anatomy of a preferred target site for the bacterial insertion sequence IS903

Like many transposons the bacterial insertion sequence IS903 was thought to insert randomly. However, using both genetic and statistical approaches, we have derived a target site for IS903 that is used 84% of the time. Computational and genetic analyses of multiple IS903 insertion sites predicted a preferred target consisting of a 21 bp palindromic pattern centered on the 9 bp target duplication generated during transposition. Here we show that targeting can be dissected into four components: the 5 bp flanking sequences, the most important sequences required for site-specific insertion; the 7 bp palindromic core within the target duplication; the dinucleotide pair at the transposon-target junction; and the local DNA context. Finally, using a substrate with multiple target sites we show that a target site is more likely found by a local bind-and-slide model and not by extended DNA tracking.     

The bacteriophage Mu transposase protein can form high-affinity protein-DNA complexes with the ends of transposable elements of the Tn 3 family

The 37 kb transposable bacteriophage Mu genome encodes a transposase protein which can recognize and bind to a consensus sequence repeated three times at each extremity of its genome. A subset of this consensus sequence (5'-PuCGAAA(A)-3') is found in the ends of many class II prokaryotic transposable elements. These elements, like phage Mu, cause 5 bp duplications at the site of element insertion, and transpose by a cointegrate mechanism. Using the band retardation assay, we have found that crude protein extracts containing overexpressed Mu transposase can form high-affinity protein-DNA complexes with Mu att R and the ends of the class II elements Tn 3 (right) and IS101. No significant protein-DNA complex formation was observed with DNA fragments containing the right end of the element IS102, or a non-specific pBR322 fragment of similar size. These results suggest that the Mu transposase protein can specifically recognize the ends of other class II transposable elements and that these elements may be evolutionarily related.     

Characterization of IS476 and its role in bacterial spot disease of tomato and pepper.

IS476 is an endogenous insertion sequence present in copper-tolerant strains of Xanthomonas campestris pv. vesicatoria. Sequence analysis has revealed that the element is 1,225 base pairs in length, has 26-base-pair inverted repeats, and causes a 4-base-pair target site duplication upon insertion into the avirulence gene avrBs1. Comparison of the full-length sequence with sequences in the National Biomedical Research Foundation and National Institutes of Health data bases showed that one of the predicted IS476 proteins is partially homologous to the putative transposase of IS3 from Escherichia coli, and the inverted repeats of IS476 have significant homology to the inverted repeats of the IS51 insertion sequence of Pseudomonas syringae pv. savastanoi. A transposition assay based on the insertional inactivation of the sacRB locus of Bacillus subtilis was used to demonstrate that one of the three copies of IS476 residing on the 200-kilobase copper plasmid pXVCU1 is capable of transposition in several strains of Xanthomonas campestris. The position of IS476 insertion in several avrBs1 mutants was established and was shown to influence both induction of hypersensitivity and bacterial growth in planta.     

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.     

Characterization of two insertion sequences, IS701 and IS702, from the cyanobacterium Calothrix species PCC 7601

We describe the characterization of two insertion elements, IS701 and IS702, isolated from Calothrix species PCC 7601. These insertion elements were cloned from spontaneous pigmentation mutants. Both show the characteristics of typical bacterial insertion sequences, i.e. they present long terminal inverted repeats and they duplicate target DNA upon insertion. These elements share no homology with the only other cyanobacterial insertion sequence described so far, IS891. At least 15 copies of IS701 and 9 copies of IS702 were detected by hybridization experiments in the Calothrix 7601 genome. Their occurrence in several cyanobacterial strains is also reported.     

Direct selection of IS903 transposon insertions by use of a broad-host-range vector: isolation of catalase-deficient mutants of Actinobacillus actinomycetemcomitans

Transposon mutagenesis in bacteria generally requires efficient delivery of a transposon suicide vector to allow the selection of relatively infrequent transposition events. We have developed an IS903-based transposon mutagenesis system for diverse gram-negative bacteria that is not limited by transfer efficiency. The transposon, IS903phikan, carries a cryptic kan gene, which can be expressed only after successful transposition. This allows the stable introduction of the transposon delivery vector into the host. Generation of insertion mutants is then limited only by the frequency of transposition. IS903phikan was placed on an IncQ plasmid vector with the transposase gene located outside the transposon and expressed from isopropyl-beta-D-thiogalactopyranoside (IPTG)-inducible promoters. After transposase induction, IS903phikan insertion mutants were readily selected in Escherichia coli by their resistance to kanamycin. We used IS903phikan to isolate three catalase-deficient mutants of the periodontal pathogen Actinobacillus actinomycetemcomitans from a library of random insertions. The mutants display increased sensitivity to hydrogen peroxide, and all have IS903phikan insertions within an open reading frame whose predicted product is closely related to other bacterial catalases. Nucleotide sequence analysis of the catalase gene (designated katA) and flanking intergenic regions also revealed several occurrences of an 11-bp sequence that is closely related to the core DNA uptake signal sequence for natural transformation of Haemophilus influenzae. Our results demonstrate the utility of the IS903phikan mutagenesis system for the study of A. actinomycetemcomitans. Because IS903phikan is carried on a mobilizable, broad-host-range IncQ plasmid, this system is potentially useful in a variety of bacterial species.     

Mapping of insertion elements IS1, IS2 and IS3 on the Escherichia coli K-12 chromosome. Role of the insertion elements in formation of Hfrs and F' factors and in rearrangement of bacterial chromosomes

The chromosome of an Escherichia coli K-12 strain W3110 contains seven copies of insertion element IS1, 12 copies of IS2 and six copies of IS3. We determined the approximate locations of six copies of IS1 (named is1A to is1F), ten copies of IS2 (named is2A to is2J), and five copies of IS3 (named is3A to is3E) on the W3110 chromosome by plaque hybridization using the "mini-set" of the lambda phage library that includes 476 clones carrying chromosomal segments that cover the W3110 chromosome almost entirely. Cleavage maps of the W3110 chromosome and cleavage analysis of phage DNAs carrying insertion elements allowed us to assign more precise locations to most of the insertion elements and to determine their orientations. Insertion elements were distributed randomly along the W3110 chromosome in one or other orientation. Several of these were located at the same positions on the chromosome of another E. coli K-12 strain, JE5519, and they were assumed to be the original complement of insertion elements in E. coli K-12 wild-type. Locations and orientations of such insertion elements were correlated well with Hfr points of origin and with crossover points for excision of some F' factors derived from several Hfrs. Insertion elements may be involved also in rearrangement of bacterial chromosomes.     

IS200: a Salmonella-specific insertion sequence

A new IS element (IS200) has been identified in Salmonella. The sequence was identified as an IS element by the following criteria: its insertion caused the mutation hisD984; six copies of the sequence are present in strain LT2 of S. typhimurium; and transposition of the sequence has been observed on several occasions. IS200 is found in almost all Salmonella species examined but is absent from most other enteric bacteria. The specificity of this element for Salmonella (and the absence of IS1-IS4 from Salmonella) suggest that transfer of insertion sequences between bacterial groups may be less extensive than is commonly believed. Alternatively, the distribution may suggest that these elements play a selectively important role in bacteria.