Mapping of transfer regions within incompatibility group HI plasmid R27.

Plasmids of incompatibility group HI are large (greater than 150 kilobases [kb]) and possess an unusual thermosensitive mode of conjugative transfer. R27, the prototype IncHi1 plasmid, encodes resistance to tetracycline via a determinant which is related to transposon Tn10. A restriction endonuclease map of R27 (size, 182 kb) was recently constructed with ApaI, PstI, and XbaI. Transfer genes within R27 were mapped by insertion of Tn5 and Tn7. At least two different regions of the plasmid were concerned with transfer functions. Insertions into either region completely abolished transfer. None of the insertions had any effect on entry exclusion (Eex) of other IncH plasmids. However, a deletion mutant which lacked the Eex function was obtained, allowing us to map the probable site of the gene encoding Eex to one of the two transfer regions. The tetracycline resistance determinant in R27 was located within an 8-kb region between the two main transfer regions. The transfer genes, therefore, are not located together in R27 but are situated in at least two major widely separated transfer regions.     

Interactions between inner membrane proteins in donor and recipient cells limit conjugal DNA transfer

Conjugation enables horizontal transmission of DNA among bacteria, thereby facilitating the rapid spread of genes such as those conferring resistance to antibiotics. Cell-cell contact is required for conjugative DNA transfer but does not ensure its success. The presence of certain plasmids in potential recipient cells inhibits redundant transfer of these plasmids from competent donors despite contact between donor and recipient cells. Here, we used two closely related integrating conjugative elements (ICEs), SXT and R391, to identify genes that inhibit redundant conjugative transfer. Cells containing SXT exclude transfer of a second copy of SXT but not R391 and vice versa. The specific exclusion of SXT and R391 is dependent upon variants of TraG and Eex, ICE-encoded inner membrane proteins in donor and recipient cells, respectively. We identified short sequences within each variant that determine the exquisite specificity of self-recognition; these data suggest that direct interactions between TraG and Eex mediate exclusion.     

Identification of a membrane protein associated with expression of the surface exclusion region of the F transfer operon.

Membrane preparations from radioactively labeled male and female strains of Escherichia coli K-12 were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and autoradiography. An intensely labeled band corresponding to a protein of molecular weight of 24,000 was readily apparent in preparations from Hfr and F-prime strains but not in those from female strains. When preparations from a series of Hfr strains containing transfer operon deletions were examined, presence of the band was found to be associated with retention of the region of the F transfer operon between ilzA and traD. Thus, the band ("protein S") appears to be the product of an F tra operon activity corresponding to traS (the gene for surface or entry exclusion), or an unknown gene in its vicinity. As predicted, protein S was subject to Fin+ control; only a faint band was detectable if the repressed plasmid R100 was also present in the F lac strain. A 24,000-dalton protein was also found in membrane preparations from strains carrying the derepressed plasmids R100-1 and R1-19 but not in those from strains carrying the repressed plasmids R100 or R1. Thus, the appearance of protein S in the membrane may be a general phenomenon resulting from transfer operon expression of F-like plasmids.     

Molecular homology and incompatibility relationships between F and IncH1 plasmids

IncH1 plasmids and the F plasmid of Escherichia coli display one-way compatibility. An entering IncH1 plasmid is incompatible with a resident F plasmid, but is compatible when it is the resident plasmid. There is little molecular homology between IncH1 plasmids and the F plasmid. A single 5 MDal EcoRI restriction enzyme fragment from digests of several IncH1 plasmids hybridizes with probes constructed from the primary replication region of F. Homology can be demonstrated only with the gene for the essential replication protein of F (gene E), but the expression of incompatibility behaviour appears to be associated with the presence of the secondary replicon of the F plasmid. Thus R27 and F are compatible under growth conditions allowing replication and maintenance of F by the secondary replicon. However, a mutant F plasmid which lacks the secondary replicon of F is incompatible with R27 in both directions, irrespective of the growth conditions used.     

Nucleotide sequence and characterization of the trbABC region of the IncI1 Plasmid R64: existence of the pnd gene for plasmid maintenance within the transfer region.

A 6.72-kb DNA sequence between the exc gene and the oriT operon within the transfer region of IncI1 plasmid R64 was sequenced and characterized. Three novel transfer genes, trbA, trbB, and trbC, were found in this region, along with the pnd gene responsible for plasmid maintenance. The trbABC genes appear to be organized into an operon located adjacent to the oriT operon in the opposite orientation. The trbA and trbC genes were shown to be indispensable for R64 plasmid transfer, while residual transfer activity was detected in the case of R64 derivatives carrying the trbB++ deletion mutation. The T7 RNA polymerase-promoter system revealed that the trbB gene produced a 43-kDa protein and the trbC gene produced an 85-kDa protein. The nucleotide sequence of the pnd gene is nearly identical to that of plasmid R483, indicating a function in plasmid maintenance. The plasmid stability test indicated that the mini-R64 derivatives with the pnd gene are more stably maintained in Escherichia coli cells under nonselective conditions than the mini-R64 derivatives without the pnd gene. It was also shown that the R64 transfer system itself is involved in plasmid stability to a certain degree. Deletion of the pnd gene from the tra+ mini-R64 derivative did not affect transfer frequency. DNA segments between the exc and trbA genes for IncI1 plasmids R64, Colb-P9, and R144 were compared in terms of their physical and genetic organization.     

The complete DNA sequence and analysis of R27, a large IncHI plasmid from Salmonella typhi that is temperature sensitive for transfer

Salmonella typhi, the causative agent of typhoid fever, annually infects 16 million people and kills 600 000 world wide. Plasmid-encoded multiple drug resistance in S.typhi is always encoded by plasmids of incompatibility group H (IncH). The complete DNA sequence of the large temperature-sensitive conjugative plasmid R27, the prototype for the IncHI1 family of plasmids, has been compiled and analyzed. This 180 kb plasmid contains 210 open reading frames (ORFs), of which 14 have been previously identified and 56 exhibit similarity to other plasmid and prokaryotic ORFs. A number of insertion elements were found, including the full Tn10 transposon, which carries tetracycline resistance genes. Two transfer regions, Tra1 and Tra2, are present, which are separated by a minimum of 64 kb. Homologs of the DNA-binding proteins TlpA and H-NS that act as temperature-regulated repressors in other systems have been located in R27. Sequence analysis of transfer and replication regions supports a mosaic-like structure for R27. The genes responsible for conjugation and plasmid maintenance have been identified and mechanisms responsible for thermosensitive transfer are discussed.     

Transfer-defective and tetracycline-sensitive mutants of the incompatibility group HI plasmid R27 generated by insertion of transposon 7

Transposon Tn7 insertion was used to obtain either transfer-defective (Tra-) or tetracycline-sensitive (Tc-) mutants of the HI incompatibility group (IncHI) plasmid R27. The 600 apparent R27::Tn7 derivatives fell into three classes: Tra-, Tc-, and Tra- Tc-. Mutants of R27 defective in the thermosensitive mode of transfer characteristic of IncH plasmids were obtained with transfer frequencies of less than 1 X 10(-8) transconjugants per recipient after 18 hr at 26 degrees C. These mutants, which were generated at a frequency of 1 per 100 insertions, were nonleaky and nonrevertible. Tc- mutants of R27, generated at a frequency of 0.5 per 100 insertions, were also nonrevertible. Loss of tetracycline resistance was associated with an increased frequency of transfer (average 3.6 X 10(-3) transconjugants per donor per hour at 30 degrees C) compared with transfer of the wild-type R27 plasmid (1.6 X 10(-8) per donor per hour). Tn7 insertions which generated Tc- or Tra- mutants of R27 had no effect on entry exclusion of other H group plasmids. The molecular weights of Tra- and Tc- R27::Tn7 derivatives were approximately 120.5 MDa, corresponding to the sum of R27 (112 MDa) and Tn7 (8.5 MDa). A third class of Tn7 insertion derivatives (Tra- Tc-) was obtained; however, strains expressing this phenotype were plasmid free, and appeared to have Tn7 integrated at a chromosomal site. Restriction digestion with XbaI and subsequent hybridization with ColE1::Tn7 were used to compare R27::Tn7 derivatives and to locate Tn7 insertion sites. Loss of tetracycline resistance was associated with Tn7 insertion into a 24-kb XbaI fragment of R27. Although loss of plasmid transfer in several R27::Tn7 derivatives was accompanied by insertion of Tn7 into a 14-kb XbaI fragment of the plasmid, these mutants had also undergone a small increase in the size of the 24-kb XbaI fragment of R27.     

Genetic and nucleotide sequence analysis of the gene htdA, which regulates conjugal transfer of IncHI plasmids.

IncHI plasmids are naturally repressed for conjugative transfer and do not allow efficient propagation of the IncH pilus-specific phage Hgal. Transposons Tn7, Tn5, and TnlacZ were inserted into IncHI plasmids R478, R477-1, and R27, respectively, leading to the isolation of several plasmid mutants which exhibited increased levels of transfer and also permitted good lysis with phage Hgal. A 4.3-kb HindIII fragment from R478 reversed both phenotypic effects of derepression for the R477-1::Tn5 and the R478::Tn7 derivatives, pKFW99 and pKFW100, respectively. Exonuclease III deletions of this fragment and nucleotide sequence analysis indicated that the gene responsible for transfer repression, named here htdA, encoded a polypeptide of 150 amino acids. Cloning and sequence analysis of pDT2454 (R27::TnlacZ) revealed that the transposon had inserted into an open reading frame (ORF) which had an 83% amino acid identity with the R478 htdA gene. Maxicell analysis showed both the R27 and R478 HtdA products had molecular masses of 19.9 kDa. Conjugation experiments showed that the cloned htdA determinants caused a significant reduction of the transfer frequencies of wild-type R478 and R27 plasmids. Examination of both R478 derepressed mutants, pKFW100 and pKFW101, indicated that both transposon insertions occurred upstream of the htdA ORF. The results suggest that HtdA is a regulatory component of IncH plasmid transfer and also show that the region upstream of the htdA ORF is involved in transfer repression. The locations of the htdA determinants were identified on the plasmid maps of R27 and R478.     

Genetic analysis of transfer and incompatibility functions within the IncHI plasmid R27

This study was undertaken to establish a transfer complementation system for IncH plasmids and to locate regions of incompatibility within the HI1 plasmid, R27. Two regions of R27 were found to contribute to incompatibility as determined by incompatibility testing with fragments of R27 cloned in cosmid vectors. One of these regions hybridized with the IncHI1 rep probe (Couturier et al., Microbiol. Rev. 52, 375-395, 1988). Complementation analysis was carried out using transfer-deficient mutants of R27 in combination with pHH1508a. Cosmid vectors, which contained cloned restriction fragments of R27, were able to complement selected R27 Tra- mutants, enabling the transfer-deficient plasmid to transfer at near-normal frequencies. Complementation of R27 Tra- plasmids by pHH1508a at both 26 and 37 degrees C was shown to occur, but was host-dependent in its degree. These results suggest that the transfer mechanisms of IncHI and IncHII plasmids are related.     

Significance of filter mating in integrative incompatibility test for plasmid classification

For classification of plasmids in epidemiological studies, an integrative incompatibility test using liquid mating was developed by Sasakawa et al (Plasmid 3: 116-127, 1980). This test was designed to compare the relative mating frequency of a donor carrying a test plasmid with that of recA recipients carrying various integrated plasmids. To improve the accuracy of this method by increasing transfer frequency of a test plasmid, filter mating was introduced. A transfer frequency 10 to 30,000 times higher than that achieved by liquid mating was attained by filter mating. The degree of increase varied among the incompatibility groups and the majority of members belonging to the same incompatibility group exhibited a similar degree of increase. Standard plasmids were classified correctly with the integrative incompatibility test using filter mating. Out of 26 naturally occurring plasmids of poor transferability in liquid mating, all of domestic animal origin, 25 were correctly classified as IncH with the integrative incompatibility test using filter mating. Moreover, the method is capable of subdividing IncH plasmids directly into IncH1 and IncH2 , because IncH2 , but not IncH1 , plasmids showed incompatibility with the integrated plasmid, R478 , of the IncH2 group.     

A ColE1-encoded gene directs entry exclusion of the plasmid.

To detect entry exclusion of the ColE1 plasmid, we established an assay system that was not influenced by incompatibility of extant plasmids in the recipient cells or by the viability of the cells due to the killing action of colicin E1 protein. The assay revealed that exc1 and exc2, assigned as genes directing entry exclusion, had no exclusion activity. Instead, mbeD, which had been characterized as a gene for plasmid mobilization, directed the exclusion activity. MbeD was overexpressed and identified as a 35S-labeled protein, which was recovered in both the soluble and membrane fractions, particularly in the inner membrane fraction. An amphipathic helical structure was predicted in the N-terminal region of MbeD as well as in the corresponding homologous proteins of ColA and ColK. These proteins may bind to the inner membrane via the N-terminal amphipathic helix and function in entry exclusion.     

Nucleotide sequence and functions of the oriT operon in IncI1 plasmid R64.

Two transfer genes of IncI1 plasmid R64, tentatively designated nikA and nikB, were cloned and sequenced. They are located adjacent to the origin of transfer (oriT) and appear to be organized into an operon, which we call the oriT operon. On the basis of the DNA sequence, nikA and nikB were concluded to encode proteins with 110 and 899 amino acid residues, respectively. Complementation analysis indicated that these two genes are indispensable for the transfer of R64 but are not required for the mobilization of ColE1. By the maxicell procedure, the product of nikA was found to be a 15-kDa protein. On treating a cleared lysate prepared from cells harboring a plasmid containing oriT, nikA, and nikB with sodium dodecyl sulfate or proteinase K, superhelical plasmid DNA in the cleared lysate was converted to an open circular form (relaxation). Relaxation of plasmid DNA was found to require the oriT sequence in cis and the nikA and nikB sequences in trans. It would thus follow that the products of nikA and nikB genes form a relaxation complex with plasmid DNA at the oriT site.     

Surface exclusion specificity of the TraT lipoprotein is determined by single alterations in a five-amino-acid region of the protein

The TraT protein is a highly cell-surface-exposed lipoprotein specified by F-like plasmids that confers serum resistance and blocks the conjugative transfer of plasmids to cells bearing identical or closely related plasmids, a process known as surface exclusion. The TraT protein specified by the antibiotic-resistance plasmid R6-5 was purified to apparent homogeneity. When added to mating mixtures, TraT blocked the transfer of plasmids belonging to Surface Exclusion Group IV (Sfx IV) but had no significant effect on the transfer of plasmids belonging to other groups. Additionally, the purified protein has a protective effect on bacterial cells incubated in serum, indicating that it does not have to be located on the cell surface to mediate serum resistance. To localize regions of the protein that were responsible for surface exclusion specificity, the amino acid sequence of the TraT protein specified by CoIB2-K98 (Sfx II) was determined by cloning and sequencing of the corresponding gene. Comparison of the derived sequence with those of the F and R100-1 proteins indicated that surface exclusion specificity of TraT is determined by single alterations in a five-amino-acid region (residues 116-120). This was confirmed by segment swapping experiments in which the specificity of the R6-5 TraT protein (Sfx IV) was switched to that of the CoIB2-K98 protein (Sfx II). Our results suggest that the region defined by residues 116-120 is located on the external face of the outer membrane and interacts specifically with the donor cell in surface exclusion.     

Gene 19 of plasmid R1 is required for both efficient conjugative DNA transfer and bacteriophage R17 infection.

F-like plasmids require a number of genes for conjugation, including tra operon genes and genes traM and traJ, which lie outside the tra operon. We now establish that a gene in the "leading region," gene 19, provides an important function during conjugation and RNA phage infection. Mutational inactivation of gene 19 on plasmid R1-16 by introduction of two nonpolar stop codons results in a 10-fold decrease in the conjugation frequency. Furthermore, infection studies with the male-specific bacteriophage R17 revealed that the phage is not able to form clear plaques in Escherichia coli cells carrying an R1-16 plasmid with the defective copy of gene 19. The total number of cells infected by phage R17 is reduced by a factor of 10. Both the conjugation- and infection-attenuated phenotypes caused by the defective gene 19 can be complemented in trans by introducing gene 19 alleles encoding the wild-type protein. Restoration of the normal phenotypes is also possible by introduction of the pilT gene encoded by the unrelated IncI plasmid R64. Our functional studies and similarities of protein 19 to proteins encoded by other DNA transfer systems, as well as the presence of a conserved motif in all of these proteins (indicative for a putative muramidase activity) suggest that protein 19 of plasmid R1 facilitates the passage of DNA during conjugation and entry of RNA during phage infection.     

Five control systems preventing transfer of Escherichia coli K-12 sex factor F.

The transfer inhibition systems of 28 Fin+ plasmids have been characterized, using Flac mutants insensitive to inhibition by R100 or R62. All F-like plasmids (except R455) and one N group plasmid determined systems analogous to that of R100; this is designated the FinOP system. None of these plasmids could supply a FinP component of the transfer inhibitor able to replace that of F itself. In addition to the FinOP and R62 transfer inhibition systems described previously, new systems were encoded by the F-like plasmid R455, the I-like plasmid JR66a, and the group X plasmid R485. Besides inhibiting F transfer, JR66a also inhibited F pilus formation and surface exclusion, whereas R485 inhibited only pilus formation and R455 inhibited neither. All three R factors inhibited transfer of J-independent Flac elements, indicating that they act directly on one or more genes (or products) of the transfer operon, rather than directly via traJ. The tral products and transfer origin sequences of two Fin+ F-like plasmids, ColB2 and R124, appear to have similar specificities to those of F itself.     

Effect of lipopolysaccharide mutations on recipient ability of Salmonella typhimurium for incompatibility group H plasmids.

Previous investigations of the incompatibility group F, P, and I plasmid systems revealed the important role of the outer membrane components in the conjugal transfer of these plasmids. We have observed variability in transfer frequency of three incompatibility group H plasmids (IncHI1 plasmid R27, IncHI2 plasmid R478, and a Tn7 derivative of R27, pDT2454) upon transfer into various Salmonella typhimurium lipopolysaccharide (LPS) mutants derived from a common parental strain, SL1027. Recipients with truncated outer core via the rfaF LPS mutation increased the transfer frequency of the IncH plasmids by up to a factor of 10(3). Mutations which resulted in the truncation of the residues following 3-deoxy-D-manno-octulosonic acid, such as the rfaE and rfaD mutations, decreased the transfer frequency to undetectable levels. Addition of phosphorylethanolamine, a component of wild-type LPS, to the media decreased the frequency of transfer of R27 into wild-type and rfaF LPS mutant recipients tested. Reversing the direction of transfer, by mating LPS mutant donors with wild-type recipients, did not affect the frequency of transfer compared to the standard matings of wild-type donor with LPS mutant recipient. These findings demonstrate that conjugation interactions affected by LPS mutation are not specific for the recipient cell. Our results suggest that LPS mutation does not affect conjugation via altered pilus binding but affects some later steps in the conjugative process, and alteration of transfer frequency by O-phosphorylethanolamine and LPS truncation is due to charge-related interactions between the donor and recipient cell.     

Mobilization of R387 Inc K conjugative plasmid by the conjugative plasmid R64 Inc I

Plasmid aggregate (R387, R64) was constructed in E. coli K12 strain. Plasmid R387 Inc K was stimulated to conjugational transfer by plasmid R64 Inc I. This stimulation was caused neither by recombination between both plasmids nor by trans-complementation of R387 conjugational systems by gene(s) product(s) of R64 plasmid. The observed phenomenon resembled rather mobilization of nonconjugative plasmids by conjugative ones. As in mobilization, the observed increase in R387 transfer frequency could take place only when both interacting plasmids were present in donor cells. Moreover, the entry exclusion system functioning in recipient cells, toward stimulating R64 plasmid affected strongly the conjugational transfer of stimulated R387 plasmid. Analogous phenomenon was observed during mobilization of nonconjugative plasmids by conjugative ones.     

The complete nucleotide sequence of the resistance plasmid R478: defining the backbone components of incompatibility group H conjugative plasmids through comparative genomics

Horizontal transfer of resistance determinants amongst bacteria can be achieved by conjugative plasmid DNA elements. We have determined the complete 274,762 bp sequence of the incompatibility group H (IncH) plasmid R478, originally isolated from the Gram negative opportunistic pathogen Serratia marcescens. This self-transferable extrachromosomal genetic element contains 295 predicted genes, of which 144 are highly similar to coding sequences of IncH plasmids R27 and pHCM1. The regions of similarity among these three IncH plasmids principally encode core plasmid determinants (i.e., replication, partitioning and stability, and conjugative transfer) and we conducted a comparative analysis to define the minimal IncHI plasmid backbone determinants. No resistance determinants are included in the backbone and most of the sequences unique to R478 were contained in a large contiguous region between the two transfer regions. These findings indicate that plasmid evolution occurs through gene acquisition/loss predominantly in regions outside of the core determinants. Furthermore, a modular evolution for R478 was signified by the presence of gene neighbors or operons that were highly related to sequences from a wide range of chromosomal, transposon, and plasmid elements. The conjugative transfer regions are most similar to sequences encoded on SXT, Rts1, pCAR1, R391, and pRS241d. The dual partitioning modules encoded on R478 resemble numerous sequences; including pMT1, pCTX-M3, pCP301, P1, P7, and pB171. R478 also codes for resistance to tetracycline (Tn10), chloramphenicol (cat), kanamycin (aphA), mercury (similar to Tn21), silver (similar to pMG101), copper (similar to pRJ1004), arsenic (similar to pYV), and tellurite (two separate regions similar to IncHI2 ter determinants and IncP kla determinants). Other R478-encoded sequences are related to Tn7, IS26, tus, mucAB, and hok, where the latter is surrounded by insLKJ, and could potentially be involved in post-segregation killing. The similarity to a diverse set of bacterial sequences highlights the ability of horizontally transferable DNA elements to acquire and disseminate genetic traits through the bacterial gene pool.