Production of alcohol from sugar beet molasses without heat or filter sterilization

Among three esters of p-hydroxybenzoate, n-butyl p-hydroxybenzoate was selected as the best antimicrobial substance. Molasses medium sterilized by this ester was used as a substrate for ethanol production. n-Butyl p-hydroxybenzoate (0.15% w/v) completely inhibited the growth of free yeast cell inoculum, Ca-alginate immobilized yeast inoculum and bacterial contaminants. Immobilization of the yeast cell inoculum in Ca-alginate with castor oil (6% v/v) offered a yeast cell protection against the inhibitory effect of n-butyl p-hydroxybenzoate. The presence of castor oil in this immobilization system did not affect the metabolic activity of the yeast in beads compared to the cells immobilized without castor oil. The yeast cell beads in this system completely utilized up to 25% molasses sugar with an ethanol yield of 10.58%, equal to 83% of its theoretical value. The beads were stable and could be used successfully for seven cycles of batch fermentation. The optimum fermentation temperature using this system was 35°C. Received 21 January 1997/ Accepted in revised form 05 May 1997     

Batch fermentation of whey ultrafiltrate by Lactobacillus helveticus for lactic acid production

Summary Cheese whey ultrafiltrate (WU) was used as the carbon source for the production of lactic acid by batch fermentation with Lactobacillus helveticus strain milano. The fermentation was conducted in a 400 ml fermentor at an agitation rate of 200 rpm and under conditions of controlled temperature (42° C) and pH. In the whey ultrafiltrate-corn steep liquor (WU-CSL) medium, the optimal pH for fermentation was 5.9. Inoculum propagated in skim milk (SM) medium or in lactose synthetic (LS) medium resulted in the best performance in fermentation (in terms of growth, lactic acid production, lactic acid yield and maximum productivity of lactic acid), as compared to that propagated in glucose synthetic (GS) medium. The yeast extract ultrafiltrate (YEU) used as the nitrogen/growth factor source in the WU medium at 1.5% (w/v) gave the highest maximum productivity of lactic acid of 2.70 g/l-h, as compared to the CSL and the tryptone ultrafiltrate (TU). L. helveticus is more advantageous than Streptococcus thermophilus and Lactobacillus delbrueckii for the production of lactic acid from WU. The L. helveticus process will provide an alternative solution to the phage contamination in dairy industries using Lactobacillus bulgaricus.     

Lactic acid production with Lactobacillus casei ssp. rhamnosus NBIMCC 1013: Modeling and optimization of the nutrient medium

The medium needed to perform a fermentation process with viable cells of Lactobacillus casei ssp. rhamnosus NBIMCC 1013 for the production of lactic acid was modeled and optimized. On the basis of single‐factor experiments and statistical analysis, the significant factors affecting the fermentation process, i.e. the concentration of carbon source, concentrations of both yeast and meat extracts, and the range of variability of these components were determined. Modeling and optimization of the medium contents were performed using central composite design. The composition of the medium used for the production of lactic acid (g/L) was as follows: glucose 69.8, meat extract 17.07, yeast extract 10.9, CH₃COONa 10, K₂HPO₄ 0.25, KH₂PO₄ 0.25, MgSO₄·7H₂O 0.05, and FeSO₄ 0.05. The maximum specific growth rate of the lactic acid bacteria (μ=0.51 h⁻¹) and other kinetic parameters were determined during cultivation in a laboratory bioreactor using the logistic equation and the Luedeking–Piret model. The obtained medium allows the production of lactic acid under optimum conditions, at high specific sugar assimilation rates and high lactic acid accumulation rates. The positive results of the paper are the new nutrient medium for lactic acid production and the process kinetic model, enabling scaling up and switching to a continuous process.     

Direct fermentation of potato starch in wastewater to lactic acid by<Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

The fungal species ofRhizopus oryzae 2062 has the capacity to carry out a single stage fermentation process for lactic acid production from potato starch wastewater. Starch hydrolysis, reducing sugar accumulation, biomass formation, and lactic acid production were affected with variations in pH, temperature, and starch source and concentration. A growth condition with starch concentration approximately 20 g/L at pH 6.0 and 30°C was favourable for starch fermentation, resulting in a lactic acid yield of 78.3%–85.5% associated with 1.5–2.0 g/L fungal biomass produced in 36 h of fermentation.     

Influence of pH on growth and bacteriocin production byLactococcus lactis subsp.lactis 14ONWC during batch fermentation

The influence of pH on growth, and lactic acid and bacteriocin production byLactococcus lactis subsp.lactis 140 NWC was studied during batch fermentation in a lactose-based complex medium. Growth and lactic acid production were modelled using a simple logistic equation while substrate consumption was found to be a function growth and lactic acid production rate. The optimal pH for growth and lactic acid production was between 6.0 and 6.5. Bacteriocin production showed primary metabolite kinetics. pH had a dramatic effect on the production of the bacteriocin, lactococcin 140. A maximum activity of 15.4 × 10⁶ AU (arbitrary units) 1^–1 was obtained after 7 h at pH 5.5. Maximum bacteriocin activity was achieved before the end of growth and was followed by a decrease in activity, which was due to adsorption to the cells of the producing organism, possibly followed by degradation by specific proteases. Both bacteriocin production and degradation rates were higher at pH 5.0 and 5.5, resulting in sharper activity peaks than at pH 6.0 or 6.5. On the basis of the experimental results a qualitative model for bacteriocin production is proposed.     

Direct fermentation of potato starch wastewater to lactic acid by Rhizopus oryzae and Rhizopus arrhizus

The biochemical kinetic of direct fermentation for lactic acid production by fungal species of Rhizopus arrhizus 3,6017 and Rhizopus oryzae 2,062 was studied with respect to growth pH, temperature and substrate. The direct fermentation was characterized by starch hydrolysis, accumulation of reducing sugar, and production of lactic acid and fungal biomass. Starch hydrolysis, reducing sugar accumulation, biomass formation and lactic acid production were affected with the variations in pH, temperature, and starch source and concentration. A growth condition with starch concentration approximately 20 g/l at pH 6.0 and 30°C was favourable for both starch saccharification and lactic acid fermentation, resulting in lactic acid yield of 0.87–0.97 g/g starch associated with 1.5–2.0 g/l fungal biomass produced in 36 h fermentation. R. arrhizus 3,6017 had a higher capacity to produce lactic acid, while R. oryzae 2,062 produced more fungal biomass under similar conditions.     

Production of bioethanol from organic whey using <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis>

Ethanol production by K. marxianus in whey from organic cheese production was examined in batch and continuous mode. The results showed that no pasteurization or freezing of the whey was necessary and that K. marxianus was able to compete with the lactic acid bacteria added during cheese production. The results also showed that, even though some lactic acid fermentation had taken place prior to ethanol fermentation, K. marxianus was able to take over and produce ethanol from the remaining lactose, since a significant amount of lactic acid was not produced (1–2 g/l). Batch fermentations showed high ethanol yield (~0.50 g ethanol/g lactose) at both 30°C and 40°C using low pH (4.5) or no pH control. Continuous fermentation of nonsterilized whey was performed using Ca-alginate-immobilized K. marxianus. High ethanol productivity (2.5–4.5 g/l/h) was achieved at dilution rate of 0.2/h, and it was concluded that K. marxianus is very suitable for industrial ethanol production from whey.     

Lactic acid fermentation of crude sorghum extract

Crude extract from sweet sorghum supplemented with vetch juice was utilized as the carbohydrate source for fermentative production of lactic acid. Fermentation of media containing 7%(w/v) total sugar was complex completed in 60–80 hr by Lactobacillus plantarum, product yield averaging 85%. Maximum acid production rates were dependent on pH, initial substrate distribution, and concentration, the rates varying from 2 to 5 g(liter·hr.) The lactic acid yield was lowered to 67% under limited medium supplementation. The fermented ammoniated product contained over eight times as much equivalent crude protein (N × 6.25) as the original medium. Unstructured kinetic models were developed for cell growth, lactic acid formation, and substrate consumption in batch fermentation. With the provision of experimentally determined kinetic parameters, the proposed models accurately the fermentation process.     

Use of mixed cultures for the fermentation of cereal-based substrates with potential probiotic properties

The production of a new cereal-based probiotic foods with suitable aroma, flavor and pH using mixed culture fermentation has been investigated. This required the selection of suitable types of cereal grains and probiotic microorganisms. In a medium of 5% (w/v) malt suspension the effects of yeast presence on the fermentation of a lactic acid bacterium (LAB), Lactobacillus reuteri, was studied. With different inoculum ratios between the yeast and the LAB, the characteristics of the fermentation broth including pH and the contents of free amino nitrogen (FAN), reducing sugar, lactic acid and ethanol were investigated. It was found that LAB growth was enhanced by the introduction of the yeast. In mixed culture broth pH was lowered and the production of lactic acid and ethanol were increased in comparison against pure LAB culture.     

Efficient conversion of lactic acid to butanol with pH-stat continuous lactic acid and glucose feeding method by Clostridium saccharoperbutylacetonicum

In order to achieve high butanol production by Clostridium saccharoperbutylacetonicum N1-4, the effect of lactic acid on acetone–butanol–ethanol fermentation and several fed-batch cultures in which lactic acid is fed have been investigated. When a medium containing 20 g/l glucose was supplemented with 5 g/l of closely racemic lactic acid, both the concentration and yield of butanol increased; however, supplementation with more than 10 g/l lactic acid did not increase the butanol concentration. It was found that when fed a mixture of lactic acid and glucose, the final concentration of butanol produced by a fed-batch culture was greater than that produced by a batch culture. In addition, a pH-controlled fed-batch culture resulted in not only acceleration of lactic acid consumption but also a further increase in butanol production. Finally, we obtained 15.5 g/l butanol at a production rate of 1.76 g/l/h using a fed-batch culture with a pH-stat continuous lactic acid and glucose feeding method. To confirm whether lactic acid was converted to butanol by the N1-4 strain, we performed gas chromatography–mass spectroscopy (GC-MS) analysis of butanol produced by a batch culture during fermentation in a medium containing [1,2,3-¹³C₃] lactic acid as the initial substrate. The results of the GC-MS analysis confirmed the bioconversion of lactic acid to butanol.     

Integrated process of starch ethanol and cellulosic lactic acid for ethanol and lactic acid production

The sequential production of bioethanol and lactic acid from starch materials and lignocellulosic materials was investigated as ethanol fermentation broth (EFB) can provide nutrients for lactic acid bacteria. A complete process was developed, and all major operations are discussed, including ethanol fermentation, broth treatment, lactic acid fermentation, and product separation. The effect of process parameters, including ethanol fermentation conditions, treatment methods, and the amount of EFB used in simultaneous saccharification and fermentation (SSF), is investigated. Under the selected process conditions, the integrated process without additional chemical consumption provides a 1.08 acid/alcohol ratio (the broth containing 22.4 g/L ethanol and 47.6 g/L lactic acid), which corresponds to a polysaccharide utilization ratio of 86.9 %. Starch ethanol can thus promote cellulosic lactic acid by providing important nutrients for lactic acid bacteria, and in turn, cellulosic lactic acid could promote starch ethanol by improving the profit of the ethanol production process. Two process alternatives for the integration of starch ethanol and cellulosic lactic acid are compared, and some suggestions are given regarding the reuse of yeast following the cellulosic SSF step for lactic acid production.     

Biotechnological production of lactic acid integrated with fishmeal wastewater treatment by <Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

Fishmeal wastewater, a seafood processing waste, was utilized for production of lactic acid and fungal biomass by Rhizopus oryzae AS 3.254 with the addition of sugars. The 30 g/l exogenous glucose in fishmeal wastewater was superior to starch in view of productivities of lactic acid and fungal biomass, and COD reduction. Fishmeal wastewater can be a replacement for peptone which was the most suitable nitrogen source for lactic acid production among the tested organic or inorganic nitrogen sources. Exogenous NaCl (12 g/l) completely inhibited the production of lactic acid and fungal growth. In the medium of COD 5,000 mg/l fishmeal wastewater with the addition of 30 g/l glucose, the maximum productivity of lactic acid was 0.723 g/l h corresponding to productivity of fungal biomass 0.0925 g/l h, COD reduction 84.9% and total nitrogen removal 50.3% at a fermentation time of 30 h.     

Utilization of by-products derived from bioethanol production process for cost-effective production of lactic acid

The by-products of bioethanol production such as thin stillage (TS) and condensed distillers solubles (CDS) were used as a potential nitrogen source for economical production of lactic acid. The effect of those by-products and their concentrations on lactic acid fermentation were investigated using Lactobacillus paracasei CHB2121. Approximately, 6.7 g/L of yeast extract at a carbon source to nitrogen source ratio of 15 was required to produce 90 g/L of lactic acid in the medium containing 100 g/L of glucose. Batch fermentation of TS medium resulted in 90 g/L of lactic acid after 48 h, and the medium containing 10 % CDS resulted in 95 g/L of lactic acid after 44 h. Therefore, TS and CDS could be considered as potential alternative fermentation medium for the economical production of lactic acid. Furthermore, lactic acid fermentation was performed using only cassava and CDS for commercial production of lactic acid. The volumetric productivity of lactic acid [2.94 g/(L·h)] was 37 % higher than the productivity obtained from the medium with glucose and CDS.     

Characterization of ethanol fermentation waste and its application to lactic acid production by Lactobacillus paracasei

In this study, an ethanol fermentation waste (EFW) was characterized for use as an alternative to yeast extract for bulk fermentation processes. EFW generated from a commercial plant in which ethanol is produced from cassava/rice/wheat/barley starch mixtures using Saccharomyces cerevisiae was used for lactic acid production by Lactobacillus paracasei. The effects of temperature, pH, and duration on the autolysis of an ethanol fermentation broth (EFB) were also investigated. The distilled EFW (DEFW) contained significant amounts of soluble proteins (2.91 g/l), nitrogen (0.47 g/l), and amino acids (24.1 mg/l). The autolysis of the EFB under optimum conditions released twice as much amino acids than in the DEFW. Batch fermentation in the DEFW increased the final lactic acid concentration, overall lactic acid productivity, and lactic acid yield on glucose by 17, 41, and 14 %, respectively, in comparison with those from comparable fermentation in a lactobacillus growth medium (LGM) that contained 2 g/l yeast extract. Furthermore, the overall lactic acid productivity in the autolyzed then distilled EFW (ADEFW) was 80 and 27 % higher than in the LGM and DEFW, respectively.     

Enhanced production of lactic acid through the use of a novel aqueous two-phase system as an extractive fermentation system

 In order to enhance the productivity of lactic acid and reduce the end-product inhibition of fermentation, the partitioning and growth of four different strains of lactic acid bacteria in three different aqueous two-phase systems were studied. Polyethyleneglycol/ dextran, polyethyleneglycol/hydroxypropyl starch polymer (HPS), and a random copolymer of ethylene oxide and propylene oxide (EO-PO)/HPS were used as polymer systems. One strain each of Lactococcus lactis subsp. lactis and of Lactobacillus delbrueckii subsp. delbrueckii partitioned completely to the interface and bottom phase in two-phase systems with low polymer concentrations of EO-PO/HPS100 and EO-PO/ HPS200. The growth and production of lactic acid by two of three L. lactis strains in a two-phase system with 5.5% (w/w) EO-PO and 12.0% (w/w) HPS100 were reduced by less than 10% compared with a reference fermentation in a normal growth medium. The viability of L. lactis subsp. lactis ATCC 19435 was maintained for at least 50 h and with four top-phase replacements during extractive fermentation in the EO-PO/HPS100 system. Moreover, when cell density reached the stationary phase in the first extractive fermentation, the lactate production in this aqueous two-phase system was maintained. Received: 2 October 1995/Received revision: 16 January 1996/Accepted: 22 January 1996     

Generalized model of the effect of pH on lactate fermentation and citrate bioconversion in Lactococcus lactis ssp. Lactis biovar. diacetylactis

An aroma-imparting mesophilic lactic starter (Lactococcus lactis ssp. lactis biovar. diacetylactis) was studied in batch culture in medium with 50 g·l^–1 lactose and 2 g·l^–1 citrate. The effect of pH on the physiology of growth and the production of flavour compounds was investigated with a mathematical model. The specific rates of growth and of lactose fermentation obeyed a law of non-competitive inhibition by lactic acid produced, inhibition increasing as the pH of the medium decreased. The pH thus acted indirectly by increasing the proportion of non-dissociated lactic acid, identified as the inhibiting form of lactic acid. The generalized model, taking into account the effect of pH, was tested using fermentations at pH controlled at different values (4.5–6.5), as well as with a fermentation conducted at non-regulated pH. These simulations supported the working hypotheses. The effect of pH on the fermentation of citric acid resulted in an increase in the maximal specific rate of citrate utilization, in the bioconversion yield, and in the constant of diacetyl and acetoin reduction at acid pH. The production of flavour compounds is a complex phenomenon resulting from the interaction of pH, citric acid concentration, and the physiological state of the cells. These results are discussed with respect to the use of this strain in the preparation of manufactured dairy products.     

Sugar Beet Juice Fermentation by Zymomonas mobilis Attached to Stainless Steel Wire Spheres

The fermentation of sugar beet juice as well as juice syrup medium by Zymomonas mobilis inoculum attached to stainless steel wire spheres was investigated. A semi‐synthetic sucrose medium enriched with mineral salts and yeast extract was used as the control. It was established that raw sugar beet juice ensured good Zymomonas mobilis culture growth and slightly decreased ethanol synthesis applying both flame‐burned and TiCl₄‐treated wire spheres as carriers (Q_x = 0.05—0.06 g/l × h; Q_eth = 1.02—1.22 g/l × h). High ethanol yield was also observed in juice medium (Y = 0.45‐0.46 g/g), however, levan synthesis with this medium decreased. The application of juice syrup brought about less growth effect and ethanol synthesis as compared to juice medium. The use of semi‐synthetic sucrose medium resulted in high levan production (Q_lev = 0.6—0.7 g/l × h), however, reduced ethanol production by 40%. In conclusion, sugar beet juice or syrup is recommendable for the preparation of Zymomonas mobilis inoculum. The levan production stage has to be realized using an optimized semi‐synthetic sucrose medium. The installed wire spheres filled with inocula provided the possibility for a repeated batch fermentation process, which could be recommended for both juice and semi‐synthetic sucrose medium fermentation.     

Batch fermentations on synthetic mixed sugar and starch medium with amylolytic lactic acid bacteria

The green crop drying industry in Denmark uses Italian rye grass, clover, and alfalfa as raw materials for the production of green pellets. The green crop drying industry solves its energy economical problems by heating and pressing of the green crop before drying. The produced sidestream is called brown juice. Brown juice was shown to be an excellent medium for lactic acid fermentation. The aim of this study was to investigate the utilisation of brown juice in the production of polylactic acid, where wheat starch would be added to increase the lactic acid yield and, thus, the feasibility of the process. A number of amylolytic lactic acid bacteria have been identified, and in this work, six different strains were tested for their ability to produce α-amylase and to utilise all sugars with high lactic acid yield in a medium with a complex composition of free sugars (brown juice) and starch. Lactobacillus plantarum A6 was the only strain that showed both a good lactic acid production and utilisation of starch in this medium. The growth rate of this strain was approximately 0.4 h⁻¹ and the lactic acid yield was 0.7.     

Improved oxygen transfer and increased l-lactic acid production by morphology control of Rhizopus oryzae in a static bed bioreactor

Rhizopus oryzae was immobilized on a cotton matrix in a static bed bioreactor. Compared with free cells in a stirred tank bioreactor, immobilized R. oryzae in this bioreactor gave higher lactic acid production but lower ethanol production. The highest lactic acid production rate (2.09 g/L h) with the final concentration of 37.83 g/L from 70 g/L glucose was achieved when operating the bioreactor at 700 rpm and 0.5 vvm air. To better understand the relationship between shear effects (agitation and aeration) and R. oryzae morphology and metabolism, oxygen transfer rate, fermentation kinetics, and lactate dehydrogenase activity were determined. In immobilized cell culture, higher oxygen transfer rate and lactic acid production were achieved but lower lactate dehydrogenase activity was found as compared with those in free cell culture operated at the same conditions. These results clearly imply that mass transport was the rate controlling step in lactic acid fermentation by R. oryzae.     

Applicability of pectate-entrapped <Emphasis Type="Italic">Lactobacillus casei</Emphasis> cells for <Emphasis Type="SmallCaps">l</Emphasis>(+) lactic acid production from whey

Lactic acid is a versatile organic acid, which finds major application in the food, pharmaceuticals, and chemical industries. Microbial fermentation has the advantage that by choosing a strain of lactic acid bacteria producing only one of the isomers, an optically pure product can be obtained. The production of l(+) lactic acid is of significant importance from nutritional viewpoint and finds greater use in food industry. In view of economic significance of immobilization technology over the free-cell system, immobilized preparation of Lactobacillus casei was employed in the present investigation to produce l(+) lactic acid from whey medium. The process conditions for the immobilization of this bacterium using calcium pectate gel were optimized, and the developed cell system was found stable during whey fermentation to lactic acid. A high lactose conversion (94.37%) to lactic acid (32.95 g/l) was achieved with the developed immobilized system. The long-term viability of the pectate-entrapped bacterial cells was tested by reusing the immobilized bacterial biomass, and the entrapped bacterial cells showed no decrease in lactose conversion to lactic acid up to 16 batches, which proved its high stability and potential for commercial application.