Gene duplication of the eight-stranded beta-barrel OmpX produces a functional pore: a scenario for the evolution of transmembrane beta-barrels

The repeating unit of outer membrane beta-barrels from Gram-negative bacteria is the beta-hairpin, and representatives of this protein family always have an even strand number between eight and 22. Two dominant structural forms have eight and 16 strands, respectively, suggesting gene duplication as a possible mechanism for their evolution. We duplicated the sequence of OmpX, an eight-stranded beta-barrel protein of known structure, and obtained a beta-barrel, designated Omp2X, which can fold in vitro and in vivo. Using single-channel conductance measurements and PEG exclusion assays, we found that Omp2X has a pore size similar to that of OmpC, a natural 16-stranded barrel. Fusions of the homologous proteins OmpX, OmpA and OmpW were able to fold in vitro in all combinations tested, revealing that the general propensity to form a beta-barrel is sufficient to evolve larger barrels by simple genetic events.     

Structure of the monomeric outer-membrane porin OmpG in the open and closed conformation

OmpG, a monomeric pore-forming protein from Escherichia coli outer membranes, was refolded from inclusion bodies and crystallized in two different conformations. The OmpG channel is a 14-stranded beta-barrel, with short periplasmic turns and seven extracellular loops. Crystals grown at neutral pH show the channel in the open state at 2.3 A resolution. In the 2.7 A structure of crystals grown at pH 5.6, the pore is blocked by loop 6, which folds across the channel. The rearrangement of loop 6 appears to be triggered by a pair of histidine residues, which repel one another at acidic pH, resulting in the breakage of neighbouring H-bonds and a lengthening of loop 6 from 10 to 17 residues. A total of 151 ordered LDAO detergent molecules were found in the 2.3 A structure, mostly on the hydrophobic outer surface of OmpG, mimicking the outer membrane lipid bilayer, with three LDAO molecules in the open pore. In the 2.7 A structure, OmpG binds one OG and one glucose molecule as sugar substrates in the closed pore.     

Projection structure of the monomeric porin OmpG at 6 A resolution

The Escherichia coli porin OmpG, which acts as an efficient unspecific channel for mono-, di- and trisaccharides, has been purified and crystallized in two dimensions. Projection maps of two different crystal forms of OmpG at 6 A resolution show that the protein has a beta-barrel structure characteristic for outer membrane proteins, and that it does not form trimers, unlike most other porins such as OmpF and OmpC, but appears in monomeric form. The size of the barrel is approximately 2.5 nm, indicating that OmpG may consist of 14 beta-strands. The projection map suggests that the channel is restricted by internal loops.     

Mycobacterial porins--new channel proteins in unique outer membranes

Mycobacteria protect themselves with an outer lipid bilayer, which is the thickest biological membrane hitherto known and has an exceptionally low permeability rendering mycobacteria intrinsically resistant to many antibiotics. Pore proteins spanning the outer membrane mediate the diffusion of hydrophilic nutrients. Mycobacterium tuberculosis possesses at least two porins in addition to the low activity channel protein OmpATb. OmpATb is essential for adaptation of M. tuberculosis to low pH and survival in macrophages and mice. The channel activity of OmpATb is likely to play a major role in the defence of M. tuberculosis against acidification within the phagosome of macrophages. MspA is the main porin of Mycobacterium smegmatis. It forms a tetrameric complex with a single central pore of 10 nm length and a cone-like structure. This structure differs clearly from that of the trimeric porins of Gram-negative bacteria, which form one 4 nm long pore per monomer. The 45-fold lower number of porins compared to Gram-negative bacteria and the exceptional length of the pores are two major determinants of the low permeability of the outer membrane of M. smegmatis for hydrophilic solutes. The importance of the synergism between slow transport through the porins and drug efflux or inactivation for the development of drugs against M. tuberculosis is discussed.     

The core of the tetrameric mycobacterial porin MspA is an extremely stable beta-sheet domain

MspA is the major porin of Mycobacterium smegmatis mediating the exchange of hydrophilic solutes across the cell wall and is the prototype of a new family of tetrameric porins with a single central pore of 10 nm in length. Infrared and circular dichroism spectroscopy revealed that MspA consists mainly of antiparallel beta-strands organized in a coherent domain. Heating to 92 and 112 degrees C was required to dissociate the MspA tetramer and to unfold the beta-sheet domain in the monomer, respectively. The stability of the MspA tetramer exceeded the remarkable stability of the porins of Gram-negative bacteria for every condition tested and was not reduced in the presence of 2% SDS and at any pH from 2 to 14. These results indicated that the interactions between the MspA subunits are different from those in the porins of Gram-negative bacteria and are discussed in the light of a channel-forming beta-barrel as a core structure of MspA. Surprisingly, the channel activity of MspA in 2% SDS and 7.6 m urea at 50 degrees C was reduced 13- and 30-fold, respectively, although the MspA tetramer and the beta-sheet domain were stable under those conditions. Channel closure by conformational changes of extracellular loops under those conditions is discussed to explain these observations. This study presents the first experimental evidence that outer membrane proteins not only from Gram-negative bacteria but also from mycobacteria are beta-sheet proteins and demonstrates that MspA constitutes the most stable transmembrane channel protein known so far. Thus, MspA may be of special interest for biotechnological applications.     

Structure of the translocator domain of a bacterial autotransporter

Autotransporters are virulence-related proteins of Gram-negative bacteria that are secreted via an outer-membrane-based C-terminal extension, the translocator domain. This domain supposedly is sufficient for the transport of the N-terminal passenger domain across the outer membrane. We present here the crystal structure of the in vitro-folded translocator domain of the autotransporter NalP from Neisseria meningitidis, which reveals a 12-stranded beta-barrel with a hydrophilic pore of 10 x 12.5 A that is filled by an N-terminal alpha-helix. The domain has pore activity in vivo and in vitro. Our data are consistent with the model of passenger-domain transport through the hydrophilic channel within the beta-barrel, and inconsistent with a model for transport through a central channel formed by an oligomer of translocator domains. However, the dimensions of the pore imply translocation of the secreted domain in an unfolded form. An alternative model, possibly covering the transport of folded domains, is that passenger-domain transport involves the Omp85 complex, the machinery required for membrane insertion of outer-membrane proteins, on which autotransporters are dependent.     

Correct folding of the beta-barrel of the human membrane protein VDAC requires a lipid bilayer

Spontaneous membrane insertion and folding of beta-barrel membrane proteins from an unfolded state into lipid bilayers has been shown previously only for few outer membrane proteins of Gram-negative bacteria. Here we investigated membrane insertion and folding of a human membrane protein, the isoform 1 of the voltage-dependent anion-selective channel (hVDAC1) of mitochondrial outer membranes. Two classes of transmembrane proteins with either alpha-helical or beta-barrel membrane domains are known from the solved high-resolution structures. VDAC forms a transmembrane beta-barrel with an additional N-terminal alpha-helix. We demonstrate that similar to bacterial OmpA, urea-unfolded hVDAC1 spontaneously inserts and folds into lipid bilayers upon denaturant dilution in the absence of folding assistants or energy sources like ATP. Recordings of the voltage-dependence of the single channel conductance confirmed folding of hVDAC1 to its active form. hVDAC1 developed first beta-sheet secondary structure in aqueous solution, while the alpha-helical structure was formed in the presence of lipid or detergent. In stark contrast to bacterial beta-barrel membrane proteins, hVDAC1 formed different structures in detergent micelles and phospholipid bilayers, with higher content of beta-sheet and lower content of alpha-helix when inserted and folded into lipid bilayers. Experiments with mixtures of lipid and detergent indicated that the content of beta-sheet secondary structure in hVDAC1 decreased at increased detergent content. Unlike bacterial beta-barrel membrane proteins, hVDAC1 was not stable even in mild detergents such as LDAO or dodecylmaltoside. Spontaneous folding of outer membrane proteins into lipid bilayers indicates that in cells, the main purpose of membrane-inserted or associated assembly factors may be to select and target beta-barrel membrane proteins towards the outer membrane instead of actively assembling them under consumption of energy as described for the translocons of cytoplasmic membranes.     

Type I secretion and multidrug efflux: transport through the TolC channel-tunnel

The crystal structure of TolC from Escherichia coli was recently determined to 2.1-A resolution and shows a unique type of channel architecture: a 12-stranded beta-barrel spans the outer membrane and is attached to a long alpha-helical channel that penetrates far into the periplasm. The structure suggests a mechanism for its role in secretion of proteins and in efflux of toxic small molecules. The TolC export pathway is compared with several import pathways of gram-negative bacteria where the outer membrane protein structures are also known.     

The outer membrane protein OmpW forms an eight-stranded beta-barrel with a hydrophobic channel

Escherichia coli OmpW belongs to a family of small outer membrane proteins that are widespread in Gram-negative bacteria. Their functions are unknown, but recent data suggest that they may be involved in the protection of bacteria against various forms of environmental stress. To gain insight into the function of these proteins A we have determined the crystal structure of E. coli OmpW to 2.7-A resolution. The structure shows that OmpW forms an 8-stranded beta-barrel with a long and narrow hydrophobic channel that contains a bound n-dodecyl-N,N-dimethylamine-N-oxide detergent molecule. Single channel conductance experiments show that OmpW functions as an ion channel in planar lipid bilayers. The channel activity can be blocked by the addition of n-dodecyl-N,N-dimethylamine-N-oxide. Taken together, the data suggest that members of the OmpW family could be involved in the transport of small hydrophobic molecules across the bacterial outer membrane.     

Manipulation of charge distribution in the arginine and glutamate clusters of the OmpG pore alters sugar specificity and ion selectivity

OmpG is a general diffusion pore in the E. coli outer membrane with a molecular architecture comprising a 14-stranded β-barrel scaffold and unique structural features. In contrast to other non-specific porins, OmpG lacks a central constriction zone and has an exceptionally wide pore diameter of about 13 Å. The equatorial plane of OmpG harbors an annulus of four alternating basic and acidic patches whose function is only poorly characterized. We have investigated the role of charge distribution for ion selectivity and sugar transport with the help of OmpG variants mutated in the annulus. Substituting the glutamate residues of the annulus for histidines or alanines led to a strong reduction in cation selectivity. Replacement of the glutamates in the annulus by histidine residues also disfavored the passage of pentoses and hexoses relative to disaccharides. Our results demonstrate that despite the wide pore diameter, an annulus only consisting of two opposing basic patches confers reduced cation and monosaccharide transport compared to OmpG wild type. Furthermore, randomization of charged residues in the annulus had the potential to abolish pH-dependency of sugar transport. Our results indicate that E¹⁵, E³¹, R⁹², R¹¹¹ and R²¹¹ in the annulus form electrostatic interactions with R²²⁸, E²²⁹ and D²³² in loop L6 that influence pH-dependency of sugar transport.     

Crystal structure of the outer membrane protein OpdK from Pseudomonas aeruginosa

In Gram-negative bacteria that do not have porins, most water-soluble and small molecules are taken up by substrate-specific channels belonging to the OprD family. We report here the X-ray crystal structure of OpdK, an OprD family member implicated in the uptake of vanillate and related small aromatic acids. The OpdK structure reveals a monomeric, 18-stranded beta barrel with a kidney-shaped central pore. The OpdK pore constriction is relatively wide for a substrate-specific channel (approximately 8 A diameter), and it is lined by a positively charged patch of arginine residues on one side and an electronegative pocket on the opposite side-features likely to be important for substrate selection. Single-channel electrical recordings of OpdK show binding of vanillate to the channel, and they suggest that OpdK forms labile trimers in the outer membrane. Comparison of the OpdK structure with that of Pseudomonas aeruginosa OprD provides the first qualitative insights into the different substrate specificities of these closely related channels.     

The beta-barrel finder (BBF) program,allowing identification of outer membrane beta-barrel proteins encoded within prokaryotic genomes

Many outer membrane proteins (OMPs) in Gram-negative bacteria possess known beta-barrel three-dimensional (3D) structures. These proteins, including channel-forming transmembrane porins, are diverse in sequence but exhibit common structural features. We here report computational analyses of six outer membrane proteins of known 3D structures with respect to (1) secondary structure, (2) hydropathy, and (3) amphipathicity. Using these characteristics, as well as the presence of an N-terminal targeting sequence, a program was developed allowing prediction of integral membrane beta-barrel proteins encoded within any completely sequenced prokaryotic genome. This program, termed the beta-barrel finder (BBF) program, was used to analyze the proteins encoded within the Escherichia coli genome. Out of 4290 sequences examined, 118 (2.8%) were retrieved. Of these, almost all known outer membrane proteins with established beta-barrel structures as well as many probable outer membrane proteins were identified. This program should be useful for predicting the occurrence of outer membrane proteins in bacteria with completely sequenced genomes.     

NanC Crystal Structure, a Model for Outer-Membrane Channels of the Acidic Sugar-Specific KdgM Porin Family

Sialic acids are acidic sugars present mostly on vertebrate cell surfaces, which can be metabolized by bacteria and act as an inflammation signal. N-Acetylneuraminic acid, the most abundant sialic acid, can enter into Escherichia coli K12 through NanC, an N-acetylneuraminic acid-inducible outer-membrane channel. With its 215 residues, NanC belongs to the family of small monomeric KdgM-related porins. KdgM homologues are found in gammaproteobacteria, including major plant and human pathogens, and together they define a large family of putative acidic sugar/oligosaccharide transporters, which are as yet poorly characterized. Here, we present the first high-resolution structure of a KdgM family member. NanC folds into a 28-Å-high, 12-stranded β-barrel, resembling the β-domain of autotransporter NalP and defining an open pore with an average radius of 3.3 Å. The channel is lined by two strings of basic residues facing each other across the pore, a feature that appears largely conserved within the KdgM family and is likely to facilitate the diffusion of acidic oligosaccharides.     

Crystal structure of the bacterial nucleoside transporter Tsx

Tsx is a nucleoside-specific outer membrane (OM) transporter of Gram-negative bacteria. We present crystal structures of Escherichia coli Tsx in the absence and presence of nucleosides. These structures provide a mechanism for nucleoside transport across the bacterial OM. Tsx forms a monomeric, 12-stranded beta-barrel with a long and narrow channel spanning the outer membrane. The channel, which is shaped like a keyhole, contains several distinct nucleoside-binding sites, two of which are well defined. The base moiety of the nucleoside is located in the narrow part of the keyhole, while the sugar occupies the wider opening. Pairs of aromatic residues and flanking ionizable residues are involved in nucleoside binding. Nucleoside transport presumably occurs by diffusion from one binding site to the next.     

Folding kinetics of the outer membrane proteins OmpA and FomA into phospholipid bilayers

The folding mechanism of outer membrane proteins (OMPs) of Gram-negative bacteria into lipid bilayers has been studied using OmpA of E. coli and FomA of F. nucleatum as examples. Both, OmpA and FomA are soluble in unfolded form in urea and insert and fold into phospholipid bilayers upon strong dilution of the denaturant urea. OmpA is a structural protein and forms a small ion channel, composed of an 8-stranded transmembrane beta-barrel domain. FomA is a voltage-dependent porin, predicted to form a 14 stranded beta-barrel. Both OMPs fold into a range of model membranes of very different phospholipid compositions. Three membrane-bound folding intermediates of OmpA were discovered in folding studies with dioleoylphosphatidylcholine bilayers that demonstrated a highly synchronized mechanism of secondary and tertiary structure formation of beta-barrel membrane proteins. A study on FomA folding into lipid bilayers indicated the presence of parallel folding pathways for OMPs with larger transmembrane beta-barrels.     

Crystal structure of osmoporin OmpC from E. coli at 2.0 A

Porins form transmembrane pores in the outer membrane of Gram-negative bacteria with matrix porin OmpF and osmoporin OmpC from Escherichia coli being differentially expressed depending on environmental conditions. The three-dimensional structure of OmpC has been determined to 2.0 A resolution by X-ray crystallography. As expected from the high sequence similarity, OmpC adopts the OmpF-like 16-stranded hollow beta-barrel fold with three beta-barrels associated to form a tight trimer. Unlike in OmpF, the extracellular loops form a continuous wall at the perimeter of the vestibule common to the three pores, due to a 14-residues insertion in loop L4. The pore constriction and the periplasmic outlet are very similar to OmpF with 74% of the pore lining residues being conserved. Overall, only few ionizable residues are exchanged at the pore lining. The OmpC structure suggests that not pore size, but electrostatic pore potential and particular atomic details of the pore linings are the critical parameters that physiologically distinguish OmpC from OmpF.     

A common channel-forming motif in evolutionarily distant porins.

Four new crystal packings of Escherichia coli porins are presented (phosphoporin, maltoporin, and two crystal forms of matrix porin). These were determined by molecular replacement methods using a polyalanine trial model acquired from the refined coordinates of porin from Rhodobacter capsulatus. The successful molecular replacement shows that the dominant motif found in R. capsulatus porin (a 16-stranded antiparallel beta-barrel) also applies to the E. coli porins, despite the lack of significant amino acid sequence homology. A 30 degrees-40 degrees tilt of the beta-strands with respect to the membrane normal was derived from the intensity distributions in the X-ray diffraction patterns for each porin studied, stressing their similarity. In view of the evolutionary distance between enteric and photosynthetic bacteria, the antiparallel beta-barrel may have significance as a basic structural motif for the formation of bacterial membrane channel structures.     

Channel properties of TpsB transporter FhaC point to two functional domains with a C-terminal protein-conducting pore

Integral outer membrane transporters of the Omp85/TpsB superfamily mediate the translocation of proteins across, or their integration into, the outer membranes of Gram-negative bacteria, chloroplasts, and mitochondria. The Bordetella pertussis FhaC/FHA couple serves as a model for the two-partner secretion pathway in Gram-negative bacteria, with the TpsB protein, FhaC, being the specific transporter of its TpsA partner, FHA, across the outer membrane. In this work, we have investigated the structure/function relationship of FhaC by analyzing the ion channel properties of the wild type protein and a collection of mutants with varied FHA secretion activities. We demonstrated that the channel is formed by the C-terminal two-thirds of FhaC most likely folding into a beta-barrel domain predicted to be conserved throughout the family. A C-proximal motif that represents the family signature appears essential for pore function. The N-terminal 200 residues of FhaC constitute a functionally distinct domain that modulates the pore properties and may participate in FHA recognition.     

Identification of positively charged residues of FomA porin of Fusobacterium nucleatum which are important for pore function.

FomA porin is the major outer-membrane protein of Fusobacterium nucleatum. It exhibits the functional properties of a general diffusion porin, but has no sequence similarity to other porins. According to the proposed topology model, each monomer of this trimeric protein is a beta-barrel consisting of 16 transmembrane segments with eight surface-exposed loops. Several conserved charged residues are proposed to extend from the beta-barrel wall into the aqueous channel lumen, and may contribute to a transverse electric field similar to that at the pore constriction of porins with known structure. The goal of our study was to identify particular basic residues contributing to such an electric field in FomA. Several arginines and lysines were replaced by negatively charged glutamates or uncharged alanines. The mutated FomA porins were expressed in Escherichia coli, and the effects on pore function were studied in vivo, by assaying the uptake rate of beta-lactam antibiotics, and in vitro after reconstitution of the purified proteins in lipid bilayer membranes. Some of the point mutations had a significant impact on the channel properties. The substitution R92A produced a 130% increased permeability of the zwitterionic beta-lactam cephaloridine, and the cation selectivity of R92E increased by 70%. The effects of the R90E substitution on channel properties were similar. Most of the point mutations had a minor effect on the voltage gating of the FomA channel, resulting in an increased sensitivity, except for K78E, which showed a decreased sensitivity. The latter mutation had no effect on cation selectivity, but the K78A substitution improved the uptake rate of cephaloridine. The results presented here indicate that arginines 90 and 92 are probably part of the constriction zone of the FomA porin, and lysine 78 and arginines 115 and 117 are probably in close proximity to this region as well.     

Functional assay of Salmonella typhi OmpC using reconstituted large unilamellar vesicles: a general method for characterization of outer membrane proteins

The immunodominant trimeric beta-barrel outer membrane protein OmpC from Salmonella typhi, the causative agent of typhoid, has been functionally characterized here. The activity in the vesicle environment was studied in vitro using OmpC reconstituted into proteoliposomes. Passage of polysaccharides and polyethyleneglycols through OmpC has been examined to determine the permeability properties. The relative rate of neutral solute flux yields a radius of 1.1 nm for the S. typhi OmpC pore. This is almost double the pore size of Escherichia coli. This provides an example of large pore size present in the porins that form trimers as in the general bacterial porin family. The method used in this study provides a good membrane model for functional studies of porins.