Biosynthesis of 1,3-propanediol from recombinant E. coli by optimization process using pure and crude glycerol as a sole carbon source under two-phase fermentation system

The environmental and nutritional condition for 1,3-propanediol (1,3-PD) production by the novel recombinant E. coli BP41Y3 expressing fusion protein were first optimized using conventional approach. The optimum environmental conditions were: initial pH at 8.0, incubation at 37 °C without shaking and agitation. Among ten nutrient variables, fumarate, (NH₄)₂HPO₄ and peptone were selected to study on their interaction effect using the response surface methodology. The optimum medium contained modified Riesenberg medium (containing pure glycerol as a sole carbon source) supplemented with 63.65 mM fumarate, 3.80 g/L (NH₄)₂HPO₄ and 1.12 g/L peptone, giving the maximum 1,3-PD production of 2.43 g/L. This was 3.5-fold higher than the original medium (0.7 g/L). Two-phase cultivation system was conducted and the effect of pH control (at 6.5, 7.0 and 8.0) was investigated under anaerobic condition by comparing with the no pH control condition. The cultivation system without pH control (initial pH of 8.0) gave the maximum values of 1.65 g/L 1,3-PD, the 1,3-PD production rate of 0.13 g/L h and the yield of 0.31 mol 1,3-PD/mol crude glycerol. Hence, using crude glycerol as a sole carbon source resulted in 32 % lower 1,3-PD production from this recombinant strain that may be due to the presence of various impurities in the crude glycerol of biodiesel plant. In addition, succinic acid was found to be a major product during fermentation by giving the maximum concentration of 11.92 g/L after 24 h anaerobic cultivation.     

Fast conversion of glycerol to 1,3-propanediol by a new strain of Klebsiella pneumoniae

Five bacterial strains screened from a batch of 39 samples could convert glycerol anaerobically to 1,3-propanediol (1,3-PD). One of the strains, XJ-Li, which could synthesize 1,3-PD with a higher concentration, was identified and characterized. Phylogenetic analysis of the strain XJ-Li included the study of morphology, physiological and biochemical characteristics. In addition, 16SrDNA sequences were created. The results indicated that this strain is a member of Klebsiella pneumoniae. The optimal cultivation parameters for pH and temperature were determined as 8.0 and 40 °C, respectively. The optimized nitrogen source and carbon source were 6.0 g/L of (NH₄)₂SO₄ and 20 g/L of glycerol, respectively. After 8 h in batch fermentation, both the 1,3-PD concentration and glycerol consumption reached the maximum, with 12.2 g/L of 1,3-PD and 1.53 g/L h of productivity, and a molar yield of 1,3-PD to glycerol of 0.75. Fed-batch fermentation also indicated a higher molar yield of 0.70, and the concentration of 1,3-PD reached 38.1 g/L after 66.4 g/L of glycerol consumption. The results of batch and fed-batch fermentations demonstrated that K. pneumoniae XJ-Li would be an excellent 1,3-PD producer.     

Optimization of culture conditions for 1,3-propanediol production from crude glycerol by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> using response surface methodology

To produce 1,3-propanediol (1,3-PD) from crude glycerol, cultivation conditions were optimized by response surface methodology (RSM) based on a 2⁵ factorial central composite design (CCD). RSM was adopted to derive a statistical model for the individual and interactive effects of crude glycerol, (NH₄)₂SO₄, pH, cultivation time and temperature on the production of 1,3-PD. Optimal conditions for maximum 1,3-PD production were as follows: crude glycerol, 35 g/L; (NH₄)₂SO₄, 8 g/L; pH, 7.37; cultivation time, 10.8 h; temperature, 36.88°C. Under these optimal conditions, the design expert presented the maximal numerical solution with a predicted 1,3-PD production level of up to 13.74 g/L. The experimental production of 1,3-PD yielded 13.8 g/L, which was in close agreement with the model prediction.     

Microbial fed-batch production of 1,3-propanediol by Klebsiella pneumoniae under micro-aerobic conditions

The microbial production of 1,3-propanediol (1,3-PD) by Klebsiella pneumoniae under micro-aerobic conditions was investigated in this study. The experimental results of batch fermentation showed that the final concentration and yield of 1,3-PD on glycerol under micro-aerobic conditions approached values achieved under anaerobic conditions. However, less ethanol was produced under microaerobic than anaerobic conditions at the end of fermentation. The batch micro-aerobic fermentation time was markedly shorter than that of anaerobic fermentation. This led to an increment of productivity of 1,3-PD. For instance, the concentration, molar yield, and productivity of 1,3-PD of batch micro-aerobic fermentation by K. pneumoniae DSM 2026 were 17.65 g/l, 56.13%, and 2.94 g l^–1 h^–1, respectively, with a fermentation time of 6 h and an initial glycerol concentration of 40 g/l. Compared with DSM 2026, the microbial growth of K. pneumoniae AS 1.1736 was slow and the concentration of 1,3-PD was low under the same conditions. Furthermore, the microbial growth in fed-batch fermentation by K. pneumoniae DSM 2026 was faster under micro-aerobic than anaerobic conditions. The concentration, molar yield, and productivity of 1,3-PD in fed-batch fermentation under micro-aerobic conditions were 59.50 g/l, 51.75%, and 1.57 g l^–1 h^–1, respectively. The volumetric productivity of 1,3-PD under microaerobic conditions was almost twice that of anaerobic fed-batch fermentation, at 1.57 and 0.80 g l^–1 h^–1, respectively.     

Improved 1,3-propanediol production by engineering the 2,3-butanediol and formic acid pathways in integrative recombinant Klebsiella pneumoniae

In the biotechnological process, insufficient cofactor NADH and multiple by-products restrain the final titer of 1,3-propanediol (1,3-PD). In this study, 1,3-PD production was improved by engineering the 2,3-butanediol (2,3-BD) and formic acid pathways in integrative recombinant Klebsiella pneumoniae. The formation of 2,3-BD is catalysed by acetoin reductase (AR). An inactivation mutation of the AR in K. pneumoniae CF was generated by insertion of a formate dehydrogenase gene. Inactivation of AR and expression of formate dehydrogenase reduced 2,3-BD formation and improved 1,3-PD production. Fermentation results revealed that intracellular metabolic flux was redistributed pronouncedly. The yield of 1,3-PD reached 0.74 mol/mol glycerol in flask fermentation, which is higher than the theoretical yield. In 5 L fed-batch fermentation, the final titer and 1,3-PD yield of the K. pneumoniae CF strain reached 72.2 g/L and 0.569 mol/mol, respectively, which were 15.9% and 21.7% higher than those of the wild-type strain. The titers of 2,3-BD and formic acid decreased by 52.2% and 73.4%, respectively. By decreasing the concentration of all nonvolatile by-products and by increasing the availability of NADH, this study demonstrates an important strategy in the metabolic engineering of 1,3-PD production by integrative recombinant hosts.     

Construction and Characterization of a 1,3-Propanediol Operon

The genes for the production of 1,3-propanediol (1,3-PD) in Klebsiella pneumoniae, dhaB, which encodes glycerol dehydratase, and dhaT, which encodes 1,3-PD oxidoreductase, are naturally under the control of two different promoters and are transcribed in different directions. These genes were reconfigured into an operon containing dhaB followed by dhaT under the control of a single promoter. The operon contains unique restriction sites to facilitate replacement of the promoter and other modifications. In a fed-batch cofermentation of glycerol and glucose, Escherichia coli containing the operon consumed 9.3 g of glycerol per liter and produced 6.3 g of 1,3-PD per liter. The fermentation had two distinct phases. In the first phase, significant cell growth occurred and the products were mainly 1,3-PD and acetate. In the second phase, very little growth occurred and the main products were 1,3-PD and pyruvate. The first enzyme in the 1,3-PD pathway, glycerol dehydratase, requires coenzyme B₁₂, which must be provided in E. coli fermentations. However, the amount of coenzyme B₁₂ needed was quite small, with 10 nM sufficient for good 1,3-PD production in batch cofermentations. 1,3-PD is a useful intermediate in the production of polyesters. The 1,3-PD operon was designed so that it can be readily modified for expression in other prokaryotic hosts; therefore, it is useful for metabolic engineering of 1,3-PD pathways from glycerol and other substrates such as glucose.     

An integrated process for the production of 1,3-propanediol,lactate and 3-hydroxypropionic acid by an engineered Lactobacillus reuteri

The process economy of food grade 1,3-propanediol (1,3-PD) production by GRAS organisms like Lactobacillus reuteri (L. reuteri), is negatively impacted by the low yield and use of expensive feedstocks. In order to improve the process economy, we have developed a multiproduct process involving the production of three commercially important chemicals, namely, 1,3-PD, lactate and 3-Hydroxypropionic acid (3-HP), by engineered L. reuteri. The maximum 1,3-PD and lactate titer of 41 g/L and 31 g/L, with a volumetric productivity of 1.69 g/L/h and 0.67 g/L/h were achieved, respectively. The maximum 3-HP titer of 5.2 g/L with a volumetric productivity of 1.3 g/L/h, was obtained by biotransformation using cells recovered from the repeated fed-batch process. The volumetric productivity of 1,3-PD obtained in this study is the highest ever reported for this organism. Further cost reduction can be achieved by using waste feedstocks like milk whey, biomass hydrolysate, and crude glycerol.     

Improved n-butanol production by a non-acetone producing Clostridium pasteurianum DSMZ 525 in mixed substrate fermentation

The kinetics of growth, acid and solvent production in batch culture of Clostridium pasteurianum DSMZ 525 were examined in mixed or mono-substrate fermentations. In pH-uncontrolled batch cultures, the addition of butyric acid or glucose significantly enhanced n-butanol production and the ratio of butanol/1,3-propanediol. In pH-controlled batch culture at pH?=?6, butyric acid addition had a negative effect on growth and did not lead to a higher n-butanol productivity. On the other hand, mixed substrate fermentation using glucose and glycerol enhanced the growth and acid production significantly. Glucose limitation in the mixed substrate fermentation led to the reduction or inhibition of the glycerol consumption by the growing bacteria. Therefore, for the optimal growth and n-butanol production by C. pasteurianum, a limitation of either substrate should be avoided. Under optimized batch conditions, n-butanol concentration and maximum productivity achieved were 21 g/L, and 0.96 g/L?×?h, respectively. In comparison, mixed substrate fermentation using biomass hydrolysate and glycerol gave a n-butanol concentration of 17 g/L with a maximum productivity of 1.1 g/L?×?h. In terms of productivity and final n-butanol concentration, the results demonstrated that C. pasteurianum DSMZ 525 is well suitable for n-butanol production from mixed substrates of biomass hydrolysate and glycerol and represents an alternative promising production strain.     

Bioconversion of glycerol to 1,3-propanediol in thin stillage-based media by engineered Lactobacillus panis PM1

Thin stillage (TS) is a waste residue that remains after bioethanol production, and its disposal reflects the high costs of bioethanol production. Thus, the development of cost-effective ways to process TS is a pending issue in bioethanol plants. The aim of this study was to evaluate the utilization of TS for the production of the valuable chemical, 1,3-propanediol (1,3-PDO), by Lactobacillus panis PM1. Different fermentation parameters, including temperature, pH and strains [wild-type and a recombinant strain expressing a NADPH-dependent aldehyde reductase (YqhD) gene] were tested in batch and fed-batch cultivations. The highest 1,3-PDO concentration (12.85 g/L) and yield (0.84 g/g) were achieved by batch fermentation at pH-4.5/30 °C by the YqhD recombinant strain. Furthermore, pH-controlled batch fermentation reduced the total fermentation period, resulting in the maximal 1,3-PDO concentration of 16.23 g/L and yield of 0.72 g/g in TS without an expensive nutrient or nitrogen (e.g., yeast extract, beef extract, and peptone) supplementation. The addition of two trace elements, Mg²⁺ and Mn²⁺, in TS increased 1,3-PDO yield (0.74 g/g) without 3-hydroxypropionaldehyde production, the only intermediate of 1,3-PDO biosynthetic pathway in L. panis PM1. Our results suggest that L. panis PM1 can offer a cost-effective process that utilizes the TS to produce a value-added chemical, 1,3-PDO.     

Optimization of parameters for improvement of phenol degradation by Rhodococcus UKMP-5M using response surface methodology

Phenol is a toxic compound and is one of the major pollutants contained in the waste water from petroleum and its downstream industries. Response surface methodology (RSM) was used to optimize medium composition and culture condition for enhancement of growth of Rhodococcus UKMP-5M and phenol degradation rate in shake flask cultures. Phenol and (NH₄)₂SO₄ concentrations as well as temperature were the most significant factors that influenced growth and phenol degradation. Central composite design (CCD) was used for optimization of these parameters with growth, and degradation rates were used as the responses. Cultivation with 0.5 g/L phenol and 0.3 g/L (NH₄)₂SO₄ and incubation at 36 °C greatly enhanced growth of Rhodococcus UKMP-5M, where the final cell concentration increased from 0.117 g/L to 0.376 g/L. On the other hand, the degradation rate was greatly increased in cultivation with 0.7 g/L phenol and 0.4 g/L (NH₄)₂SO₄ and incubation at 37 °C. In this cultivation, the time taken to degrade 1 g/L phenol in the culture was reduced from 48 h to 27 h. The model for both responses was found significant and the predicted values were found to be in a good agreement with experimental values and subsequently validated. Increases in phenol degradation rate during Rhodococcus UKMP-5M cultivation corresponded well with increasing phenol hydroxylase activity.     

Production of a highly glucose tolerant β-glucosidase by Paecilomyces variotii MG3: optimization of fermentation conditions using Plackett–Burman and Box–Behnken experimental designs

β-Glucosidases (β-d-glucoside glucohydrolase, 3.2.1.21) are a group of enzymes mainly involved in the hydrolysis of β-glycosidic bonds connecting carbohydrate residues in different classes of β-d glycosides. During cellulose degradation they convert cellobiose and cellooligosaccharides produced by the endo and exoglucanases to glucose. Most of the microbial β-glucosidases are inhibited by glucose. This limits their application in commercial scale cellulose degradation ventures. Solid state fermentation production of a highly glucose tolerant β-glucosidase by a novel isolate of Paecilomyces was optimized using a two step statistical experiment design. In the first step which employed a Plackett–Burman design, the effects of parameters such as moisture, temperature, pH, inoculum concentration, incubation time and different concentrations of (NH₄)₂SO₄, KH₂PO₄, NaCl, peptone and cellobiose were evaluated. The parameters with significant influence on the process were selected and fine tuned in the second step using a Box–Behnken design. The model obtained was validated and a peptone concentration of 2 g/l, inoculum concentration of 1.2 × 10⁶ spores/ml and an incubation period of 96 h were found to be optimum for the maximum production of the enzyme. The optimization resulted in a doubling of the enzyme production by the fungus.     

利用克雷伯肺炎杆菌限制性底物发酵生产1，3-丙二醇

研究了克雷伯肺炎杆菌（Klebsiella pneumoniae）批式流加发酵生产1,3-丙二醇的发酵工艺,根据1,3-丙二醇的生产和菌体生长相关的特点,采用营养基质限制性流加的发酵工艺,通过控制氮源氯化铵以保持细胞稳定生长。结果表明：过低的氮源浓度,细胞生长受到限制,影响产物1,3-PD的合成;过高的氮源浓度,细胞比生长速率增加,但1,3-PD关于消耗甘油的得率降低,用于生长和维持代谢所消耗的甘油量增加。以0.41 g/(L·h)的氮源流加速率,残余氯化铵浓度在0.1 g/L时,转化率和生产强度最高。发酵25 h～28 h后,1,3-丙二醇最终浓度达到52.03 g/L,生产强度为2.04 g/(L·h),相对于甘油的摩尔转化率为0.66,分别比氮源限制前提高了28.0 ％、35.1 ％及29.4 ％。通过限制性流加氯化铵,控制细胞的比生长速率,使底物甘油有效转变为发酵的目标产物1,3-PD,有效实现产物1,3-PD的高生产强度以及对甘油的高转化率。     

Production of 1,3-propanediol from Glycerol by Recombinant <Emphasis Type="Italic">E. coli</Emphasis> Using Incompatible Plasmids System

1,3-Propanediol (1,3-PD) has numerous applications in polymers, cosmetics, foods, lubricants, and medicines as a bifunctional organic compound. The genes for the production of 1,3-PD in Klebsiella pneumoniae, dhaB, which encodes glycerol dehydratase, and dhaT, which encodes 1,3-PD oxidoreductase, and gdrAB, which encodes glycerol dehydratase reactivating factor, are naturally under the control of different promoters and are transcribed in different directions. These genes were coexpressed in E. coli using two incompatible plasmids (pET28a and pET22b) in the presence of selective pressure. The recombinant E. coli coexpressed the glycerol dehydratase, 1,3-propanediol oxidoreductase and reactivating factor for the glycerol dehydratase at high levels. In a fed-batch fermentation of glycerol and glucose, the recombinant E. coli containing these two incompatible plasmids consumed 14.3 g/l glycerol and produced 8.6 g/l 1,3-propanediol. In the substitution case of yqhD (encoding alcohol dehydrogenase from E. coli) for dhaT, the final 1,3-propanediol concentration of the recombinant E. coli could reach 13.2 g/l.     

Chemometric modeling and two-dimensional fluorescence analysis of bioprocess with a new strain of <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> to convert residual glycerol into 1,3-propanediol

The goal of this study was to show that the metabolism of Klebsiella pneumoniae under different aeration strategies could be monitored and predicted by the application of chemometric models and fluorescence spectroscopy. Multi-wavelength fluorescence was applied to the on-line monitoring of process parameters for K. pneumoniae cultivations. Differences observed in spectra collected under aerobiosis and anaerobiosis can be explained by the different metabolic states of the cells. To predict process variables such as biomass, glycerol, and 1,3-propanediol (1,3-PD), chemometric models were developed on the basis of the acquired fluorescence spectra, which were measured continuously. Although glycerol and 1,3-PD are not fluorescent compounds, the results showed that this technique could be successfully applied to the on-line monitoring of variables in order to understand the process and thus improve 1,3-PD production. The root mean square errors of predictions were 0.78 units, 10 g/L, and 2.6 g/L for optical density, glycerol, and 1,3-PD, respectively.     

Efficient production of ethanol from crude glycerol by a Klebsiella pneumoniae mutant strain

A mutant strain of Klebsiella pneumoniae, termed GEM167, was obtained by γ irradiation, in which glycerol metabolism was dramatically affected on exposure to γ rays. Levels of metabolites of the glycerol reductive pathway, 1,3-propanediol (1,3-PD) and 3-hydroxypropionic acid (3-HP), were decreased in the GEM167 strain compared to a control strain, whereas the levels of metabolites derived from the oxidative pathway, 2,3-butanediol (2,3-BD), ethanol, lactate, and succinate, were increased. Notably, ethanol production from glycerol was greatly enhanced upon fermentation by the mutant strain, to a maximum production level of 21.5 g/l, with a productivity of 0.93 g/l/h. Ethanol production level was further improved to 25.0 g/l upon overexpression of Zymomonas mobilispdc and adhII genes encoding pyruvate decarboxylase (Pdc) and aldehyde dehydrogenase (Adh), respectively in the mutant strain GEM167.     

Microbial production of 1,3-propanediol by Klebsiella pneumoniae using crude glycerol from biodiesel preparations

1,3-Propanediol (1,3-PD) was produced by Klebsiella pneumoniae using crude glycerol obtained from biodiesel production. The 1,3-PD concentration of 51.3 g/l⁻¹ on crude glycerol from alkali-catalyzed methanolysis of soybean oil was comparable to that of 53 g/l⁻¹ on crude glycerol derived from a lipase-catalyzed process. The productivities of 1.7 g l⁻¹ h⁻¹ on crude glycerol were comparable to that of 2 g l⁻¹ h⁻¹ on pure glycerol. It could be concluded that the crude glycerol could be directly converted to 1,3-PD without any prior purification.     

Expression of 1,3-propanediol oxidoreductase and its isoenzyme in Klebsiella pneumoniae for bioconversion of glycerol into 1,3-propanediol

In the Klebsiella pneumoniae reduction pathway for 1,3-propanediol (1,3-PD) synthesis, glycerol is first dehydrated to 3-hydroxypropionaldehyde (3-HPA) and then reduced to 1,3-PD with NADH consumption. Rapid conversion of 3-HPA to 1,3-PD is one of the ways to improve the yield of 1,3-PD from glycerol and to avoid 3-HPA accumulation, which depends on enzyme activity of the reaction and the amount of reducing equivalents available from the oxidative pathway of glycerol. In the present study, the yqhD gene, encoding 3-propanediol oxidoreductase isoenzyme from Escherichia coli and the dhaT gene, encoding 3-propanediol oxidoreductase from K. pneumoniae were expressed individually and co-expressed in K. pneumoniae using the double tac promoter expression plasmid pEtac-dhaT-tac-yqhD. The three resultant recombinant strains (K. pneumoniae/pEtac-yqhD, K. pneumoniae/pEtac-dhaT, and K. pneumoniae/pEtac-dhaT-tac-yqhD) were used for fermentation studies. Experimental results showed that the peak values for 3-HPA production in broth of the three recombinant strains were less than 25% of that of the parent strain. Expression of dhaT reduced formation of by-products (ethanol and lactic acid) and increased molar yield of 1,3-PD slightly, while expression of yqhD did not enhance molar yield of 1,3-PD, but increased ethanol concentration in broth as NADPH participation in transforming 3-HPA to 1,3-PD allowed more cellular NADH to be used to produce ethanol. Co-expression of both genes therefore decreased by-products and increased the molar yield of 1,3-PD by 11.8%, by catalyzing 3-HPA conversion to 1,3-propanediol using two cofactors (NADH and NADPH). These results have important implications for further studies involving use of YqhD and DhaT for bioconversion of glycerol into 1,3-PD.     

Enhanced 1,3-propanediol production in recombinant <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> carrying the gene <Emphasis Type="Italic">yqh</Emphasis>D encoding 1,3-propanediol oxidoreductase isoenzyme

The yqhD gene from Escherichia coli encoding 1,3-propanediol oxidoreductase isoenzyme (PDORI) and the tetracycline resistant gene (tetR) from plasmid pHY300PLK were amplified by PCR. They were inserted into vector pUC18, yielding the recombinant expression vector pUC18-yqhD-tetR. The recombinant vector was then cloned into Klebsiella pneumoniae ME-308. The overexpression of PDORI in K. pneumoniae surprisingly led to higher 1,3-propanediol production. The final 1,3-propanediol concentration of recombinant K. pneumoniae reached 67.6 g/l, which was 125.33% of that of the original strain. The maximum activity of recombinant PDORI converting 3-HPA to 1,3-PD reached 110 IU/mg after induction by IPTG at 31°C during the fermentation, while it was only 11 IU/mg under the same conditions for the wild type strain. The K _m values of the purified PDORI for 1,3-propanediol and NADP were 12.1 mM and 0.15 mM, respectively. Compared with the original strains, the concentration of the toxic intermediate 3-hydroxypropionaldehyde during the fermentation was also reduced by 22.4%. Both the increased production of 1,3-propanediol and the reduction of toxic intermediate confirmed the significant role of 1,3-propanediol oxidoreductase isoenzyme from E. coli in converting 3-hydroxypropionaldehyde to 1,3-propanediol for 1,3-PD production.     

Inactivation of <Emphasis Type="Italic">dhaD</Emphasis> and <Emphasis Type="Italic">dhaK</Emphasis> abolishes by-product accumulation during 1,3-propanediol production in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

1,3-Propanediol (1,3-PD) can be used for the industrial synthesis of a variety of compounds, including polyesters, polyethers, and polyurethanes. 1,3-PD is generated from petrochemical and microbial sources. 1,3-Propanediol is a typical product of glycerol fermentation, while acetate, lactate, 2,3-butanediol, and ethanol also accumulate during the process. Substrate and product inhibition limit the final concentration of 1,3-propanediol in the fermentation broth. It is impossible to increase the yield of 1,3-propanediol by using the traditional whole-cell fermentation process. In this study, dhaD and dhaK, the genes for glycerol dehydrogenase and dihydroxyacetone kinase, respectively, were inactivated by homologous recombination in Klebsiella pneumoniae. The dhaD/dhaK double mutant (designated TC100), selected from 5,000 single or double cross homologous recombination mutants, was confirmed as a double cross by using polymerase chain reaction. Analysis of the cell-free supernatant with high-performance liquid chromatography revealed elimination of lactate and 2,3-butanediol, as well as ethanol accumulation in TC100, compared with the wild-type strain. Furthermore, 1,3-propanediol productivity was increased in the TC100 strain expressing glycerol dehydratase and 1,3-PDO dehydrogenase regulated by the arabinose P_BAD promoter. The genetic engineering and medium formulation approaches used here should aid in the separation of 1,3-propanediol from lactate, 2,3-butanediol, and ethanol and lead to increased production of 1,3-propanediol in Klebsiella pneumoniae.