Characteristics of thermostable endoxylanase and β-xylosidase of the extremely thermophilic bacterium Geobacillus thermodenitrificans TSAA1 and its applicability in generating xylooligosaccharides and xylose from agro-residues

An extremely thermophilic bacterial isolate that produces a high titer of thermostable endoxylanase and β-xylosidase extracellularly in an inducible manner was identified as Geobacillus thermodenitrificans TSAA1. The distinctive features of this strain are alkalitolerance and halotolerance. The endoxylanase is active over a broad range of pH (5.0–10.0) and temperatures (30–100 °C) with optima at pH 7.5 and 70 °C, while β-xylosidase is optimally active at pH 7.0 and 60 °C. The T _1/2 values of the endoxylanase and β-xylosidase are 30 min at 80 °C, and 180 min at 70 °C, respectively. The endoxylanase activity is stimulated by dithiothreitol, but inhibited strongly by EDAC and Woodward’s reagent K. N-BS and DEPC strongly inhibited β-xylosidase. MALDI-ToF (MS/MS) analysis of tryptic digest of β-xylosidase revealed similarity with that of G. thermodenitrificans NG 80-2, and suggested that this belongs to the GH 52 glycosyl hydrolase super family. The action of endoxylanase on birch wood xylan and agro-residues such as wheat bran and wheat straw liberated xylooligosaccharides similar to endoxylanases of the family 10 glycoside hydrolases, while the enzyme preparation having both endoxylanase and β-xylosidase liberated xylose as main hydrolysis product.     

Biochemical analysis of a highly specific, pH stable xylanase gene identified from a bovine rumen-derived metagenomic library

A metagenomic library was generated using microbial DNA extracted from the rumen contents of a grass hay-fed dairy cow using a bacterial artificial chromosome-based vector system. Functional screening of the library identified a gene encoding a potent glycoside hydrolase, xyn10N18, localised within a xylanolytic gene cluster consisting of four open-reading frames (ORFs). The ORF, xyn10N18, encodes an endo-β-1,4-xylanase with a glycosyl hydrolase family 10 (GH10) catalytic domain, adopts a canonical α8/ß8-fold and possesses conserved catalytic glutamate residues typical of GH10 xylanases. Xyn10N18 exhibits optimal catalytic activity at 35 °C and pH 6.5 and was highly stable to pH changes retaining at least 85 % relative catalytic activity over a broad pH range (4.0–12.0). It retained 25 % of its relative activity at both low (4 °C) and high (55 °C) temperatures, however the stability of the enzyme rapidly decreased at temperatures of >40 °C. The specific activity of Xyn10N18 is enhanced by the divalent cations Mn²⁺ and Co²⁺ and is dramatically reduced by Hg²⁺ and Cu²⁺. Interestingly, EDTA had little effect on specific activity indicating that divalent cations do not function mechanistically. The enzyme was highly specific for xylan containing substrates and showed no catalytic activity against cellulose. Analysis of the hydrolysis products indicated that Xyn10N18 was an endoxylanase. Through a combination of structural modelling and in vitro enzyme characterisation this study provides an understanding of the mechanism and the substrate specificity of this enzyme serving as a starting point for directed evolution of Xyn10N18 and subsequent downstream use in industry.     

A thermo-halo-tolerant and proteinase-resistant endoxylanase from Bacillus sp. HJ14

A glycosyl hydrolase family 10 endoxylanase from Bacillus sp. HJ14 was grouped in a separated cluster with another six Bacillus endoxylanases which have not been characterized. These Bacillus endoxylanases showed less than 52 % amino acid sequence identity with other endoxylanases and far distance with endoxylanases from most microorganisms. Signal peptide was not detected in the endoxylanase. The endoxylanase was expressed in Escherichia coli BL21 (DE3), and the purified recombinant enzyme (rXynAHJ14) was characterized. rXynAHJ14 was apparent optimal at 62.5 °C and pH 6.5 and retained more than 55 % of the maximum activity when assayed at 40–75 °C, 23 % at 20 °C, 16 % at 85 °C, and even 8 % at 0 °C. Half-lives of the enzyme were more than 60 min, approximately 25 and 4 min at 70, 75, and 80 °C, respectively. The enzyme exhibited more than 62 % xylanase activity and stability at the concentration of 3–30 % (w/v) NaCl. No xylanase activity was lost after incubation of the purified rXynAHJ14 with trypsin and proteinase K at 37 °C for 60 min. Different components of oligosaccharides were detected in the time-course hydrolysis of beechwood xylan by the enzyme. During the simulated intestinal digestion phase in vitro, 11.5–19.0, 15.3–19.0, 21.9–27.7, and 28.2–31.2 μmol/mL reducing sugar were released by the purified rXynAHJ14 from soybean meal, wheat bran, beechwood xylan, and rapeseed meal, respectively. The endoxylanase might be an alternative for potential applications in the processing of sea food and saline food and in aquaculture as agastric fish feed additive.     

Characterization of a bacterial tannase from Streptococcus gallolyticus UCN34 suitable for tannin biodegradation

The gene in the locus GALLO_1609 from Streptococcus gallolyticus UCN34 was cloned and expressed as an active protein in Escherichia coli BL21 (DE3). The protein was named TanSg1 since it shows similarity to bacterial tannases previously described. The recombinant strain produced His-tagged TanSg1 which was purified by affinity chromatography. Purified TanSg1 protein showed tannase activity, having a specific activity of 577 U/mg which is 41 % higher than the activity of Lactobacillus plantarum tannase. Remarkably, TanSg1 displayed optimum catalytic activity at pH 6–8 and 50–70 °C and showed high stability over a broad range of temperatures. It retained 25 % of its relative activity after prolonged incubation at 45 °C. The specific activity of TanSg1 is enhanced by the divalent cation Ca²⁺ and is dramatically reduced by Zn²⁺ and Hg²⁺. The enzyme was highly specific for gallate and protocatechuate esters and showed no catalytic activity against other phenolic esters. The protein TanSg1 hydrolyzes efficiently tannic acid, a complex and polymeric gallotanin, allowing its complete conversion to gallic acid, a potent antioxidant. From its biochemical properties, TanSg1 is a tannase with potential industrial interest regarding the biodegradation of tannin waste or its bioconversion into biologically active products.     

Heterologous expression,purification and characterization of a highly thermolabile endoxylanase from the Antarctic fungus Cladosporium sp.

Numerous endoxylanases from mesophilic fungi have been purified and characterized. However, endoxylanases from cold-adapted fungi, especially those from Antarctica, have been less studied. In this work, a cDNA from the Antarctic fungus Cladosporium sp. with similarity to endoxylanases from glycosyl hydrolase family 10, was cloned and expressed in Pichia pastoris. The pure recombinant enzyme (named XynA) showed optimal activity on xylan at 50 °C and pH 6–7. The enzyme releases xylooligosaccharides but not xylose, indicating that XynA is a classical endoxylanase. The enzyme was most active on xylans with high content of arabinose (rye arabinoylan and wheat arabinoxylan) than on xylans with low content of arabinose (oat spelts xylan, birchwood xylan and beechwood xylan). Finally, XynA showed a very low thermostability. After 20–30 min of incubation at 40 °C, the enzyme was completely inactivated, suggesting that XynA would be the most thermolabile endoxylanase described so far in filamentous fungi. This is one of the few reports describing the heterologous expression and characterization of a xylanase from a fungus isolated from Antarctica.     

Functional expression and characterization of a chitinase from the marine archaeon Halobacterium salinarum CECT 395 in Escherichia coli

The HschiA1 gene of the archaeon Halobacterium salinarum CECT 395 was cloned and overexpressed as an active protein of 66.5 kDa in Escherichia coli. The protein called HsChiA1p has a modular structure consisting of a glycosyl hydrolase family 18 catalytic region, as well as a N-terminal family 5 carbohydrate-binding module and a polycystic kidney domain. The purified recombinant chitinase displayed optimum catalytic activity at pH 7.3 and 40 °C and showed high stability over broad pH (6–8.5) and temperature (25–45 °C) ranges. Protein activity was stimulated by the metal ions Mg⁺², K⁺, and Ca⁺² and strongly inhibited by Mn⁺². HsChiA1p is salt-dependent with its highest activity in the presence of 1.5 M of NaCl, but retains 20 % of its activity in the absence of salt. The recombinant enzyme hydrolysed p-NP-(GlcNAc)₃, p-NP-(GlcNAc), crystalline chitin, and colloidal chitin. From its sequence features and biochemical properties, it can be identified as an exo-acting enzyme with potential interest regarding the biodegradation of chitin waste or its bioconversion into biologically active products.     

Chitinase production by a newly isolated thermotolerant Paenibacillus sp. BISR-047

Chitinase is one of the important mycolytic enzymes with industrial significance, and is produced by a number of organisms, including bacteria. In this study, we describe isolation, characterization and media optimization for chitinase production from a newly isolated thermotolerant bacterial strain, BISR-047, isolated from desert soil and later identified as Paenibacillus sp. The production of extracellularly secreted chitinase by this strain was optimized by varying pH, temperature, incubation period, substrate concentrations, carbon and nitrogen source,etc. The maximum chitinase production was achieved at 45 °C with media containing (in g/l) chitin 2.0, yeast extract 1.5, glycerol 1.0, and ammonium sulphate 0.2 % (media pH 7.0). A three-fold increase in the chitinase production (712 IU/ml) was found at the optimized media conditions at 6 days of incubation. The enzyme showed activity at broad pH (3–10) and temperature (35–100 °C) ranges, with optimal activity displayed at pH 5.0 and 55 °C, respectively. The produced enzyme was found to be highly thermostable at higher temperatures, with a half-life of 4 h at 100 °C.     

Production of novel alkalitolerant and thermostable inulinase from marine actinomycete Nocardiopsis sp. DN-K15 and inulin hydrolysis by the enzyme

An actinomycete strain Nocardiopsis sp. DN-K15 showing high inulinolytic activity was isolated from marine sediment of Jiaozhou Bay in China. Under optimal conditions, Nocardiopsis sp. DN-K15 produced 25.1 U/ml of inulinase within 60 h of fermentation at shake flask level, which was 2.7-fold higher than the level in the basal medium. The optimal pH and temperature of the inulinase from strain DN-K15 were determined to be 60 °C and pH 8.0, respectively. The inulinase was highly active over a wide pH range (5.0–11.0) and retained more than 81 % of residual activity after incubation at 60 °C for 1 h, indicating its alkali-tolerant and thermostable nature. Thin layer chromatography analysis revealed that fructose was the main product of inulin hydrolysis, indicating its exoinulinase activity. The high yield of extracellular inulinase combined with its novel enzymatic property made Nocardiopsis sp. DN-K15 a potential candidate in biotechnological and industrial applications.     

Biochemical and kinetic characterization of the multifunctional β-glucosidase/β-xylosidase/α-arabinosidase,Bgxa1

Functional screening of a metagenomic library constructed with DNA extracted from the rumen contents of a grass/hay-fed dairy cow identified a protein, β-glucosidase/β-xylosidase/α-arabinosidase gene (Bgxa1), with high levels of β-glucosidase activity. Purified Bgxa1 was highly active against p-nitrophenyl-β-d-glucopyranoside (pNPG), cellobiose, p-nitrophenyl-β-d-xylopyranoside (pNPX) and p-nitrophenyl-α-d-arabinofuranoside (pNPAf), suggesting it is a multifunctional β-glucosidase/β-xylosidase/α-arabinosidase. Kinetic analysis of the protein indicated that Bgxa1 has the greatest catalytic activity against pNPG followed by pNPAf and pNPX, respectively. The catalytic efficiency of β-glucosidase activity was 100× greater than β-xylosidase or α-arabinosidase. The pH and temperature optima for the hydrolysis of selected substrates also differed considerably with optima of pH 6.0/45 °C and pH 8.5/40 °C for pNPG and pNPX, respectively. The pH dependence of pNPAf hydrolysis displayed a bimodal distribution with maxima at both pH 6.5 and pH 8.5. The enzyme exhibited substrate-dependent responses to changes in ionic strength. Bgxa1 was highly stable over a broad pH range retaining at least 70 % of its relative catalytic activity from pH 5.0–10.0 with pNPG as a substrate. Homology modelling was employed to probe the structural basis of the unique specificity of Bgxa1 and revealed the deletion of the PA14 domain and insertions in loops adjacent to the active site. This domain has been found to be an important determinant in the substrate specificity of proteins related to Bgxa1. It is postulated that these indels are, in part, responsible for the multifunctional activity of Bgxa1. Bgxa1 acted synergistically with endoxylanase (Xyn10N18) when incubated with birchwood xylan, increasing the release of reducing sugars by 168 % as compared to Xyn10N18 alone. Examination of Bgxa1 and Xyn10N18 synergy with a cellulase for the saccharification of alkali-treated straw revealed that synergism among the three enzymes enhanced sugar release by 180 % as compared to cellulase alone. Our results suggest that Bgxa1 has a number of properties that make it an interesting candidate for the saccharification of lignocellulosic material.     

Bacteriocin-Producing Lactic Acid Bacteria Isolated from Mangrove Forests in Southern Thailand as Potential Bio-Control Agents: Purification and Characterization of Bacteriocin Produced by Lactococcus lactis subsp. lactis KT2W2L

The aim of this work was to purify and characterize the bacteriocin produced by Lactococcus lactis subsp. lactis KT2W2L previously isolated from mangrove forests in southern Thailand, in order to evaluate its potential as new food protective agent. The active peptide from the cell-free supernatant of this strain was purified in 4 steps: (1) precipitation with 70 % saturated ammonium sulfate, (2) elution on a reversed-phase cartridge using different concentrations of acetonitrile, (3) cation-exchange chromatography and (4) final purification by reversed-phase HPLC on a C₈ column. The molecular mass of 3,329.5254 Da of the purified bacteriocin, determined by mass spectrometry, is nearly identical to that of peptide nisin Z. The activity of the purified bacteriocin was unaffected by pH (2.0–10.0), thermostable but was sensitive to proteolytic enzymes. The bacteriocin activity was stable after 8 weeks of storage at ?20 °C and 7 weeks of storage at 4 °C, but decreased after 3 weeks of storage at 37 °C. It was stable when incubated for 1 month at 4 °C in 0–30 % NaCl. Inhibitory spectrum of this bacteriocin showed a wide range of activity against similar bacterial strains, food-spoilage and food-borne pathogens. L. lactis subsp. lactis KT2W2L was sensitive to kanamycin, penicillin and tetracycline but resistant to ampicillin, gentamicin and vancomycin. The fragment obtained after amplification of genomic DNA from L. lactis subsp. lactis KT2W2L, with specific primers for bacteriocin genes, presented 99 % homology to the nisin Z gene. PCR amplification demonstrated that L. lactis subsp. lactis KT2W2L does not harbor virulence genes cylA, cylB, efaAfs and esp. The bacteriocin and its producing strain may find application as bio-preservatives for reduction in food-spoilage and food-borne pathogens in food products.     

Purification, Characterization of GH11 Endo-β-1,4-xylanase from Thermotolerant Streptomyces sp. SWU10 and Overexpression in Pichia pastoris KM71H

We have previously described two forms of an endo-β-1,4-xylanase (XynSW2A and XynSW2B) synthesized by thermotolerant Streptomyces sp. SWU10. Here, we describe another xylanolytic enzyme, designated XynSW1. The enzyme was purified to homogeneity from 2 L of culture filtrate. Its apparent molecular mass was 24 kDa. The optimal pH and temperature were pH 5.0 and 40 °C, respectively. The enzyme was stable in a wide pH ranges (pH 1–11), more than 80 % of initial activity remained at pH 2–11 after 16 h of incubation at 4 °C and stable up to 50 °C for 1 h. Xylobiose and xylotriose were the major xylooligosaccharides released from oat spelt xylan by the action of XynSW1, indicating of endo-type xylanase. The complete xynSW1 gene contains 1,011 bp in length and encode a polypeptide of 336 with 41 amino acids of signal peptide. The amino acid sequence analysis revealed that it belongs to glycoside hydrolase family 11 (GH11). The mature xynSW1 gene without signal peptide sequence was overexpressed in Pichia pastoris KM71H. The recombinant XynSW1 protein showed higher molecular mass due to the differences in glycosylation levels at the six N-glycosylation sites in the amino acid sequence and exhibited better physicochemical properties than those of the native enzyme including higher optimal temperature (60 °C), and specific activity, but lower optimal pH (4.0). Because of their stability in a wide pH ranges, both of native and recombinant enzymes of XynSW1, may have potential application in several industries including food, textile, biofuel, and also waste treatment.     

Purification, biochemical characterization, and structure of recombinant endo-1,4-β-xylanase XylE

The gene xylE encoding endo-1,4-β-xylanase from the 10th family of glycosyl hydrolases produced by the mycelial fungus Penicillium canescens has been expressed under the control of the strong promoter of the bgaS gene encoding β-galactosidase from P. canescens. As a result, a strain-producer of endoxylanase XylE was developed. The recombinant enzyme was isolated and purified to homogeneity with specific activity of 50 U/mg. The physicochemical and biochemical properties of the endoxylanase were studied. The maximal enzymatic activity was observed at pH 6.0 and 70°C. Endoxylanase XylE was shown to be a highly thermostable enzyme with half-inactivation period τ_1/2 of 7 h at 60°C. The kinetic parameters were 0.52 mg/ml (K _m) and 75 μmol/min per mg (V _max) using birch xylan as the substrate. Crystals of endoxylonase XylE were obtained, and the 3D structure was solved at 1.47 ? resolution. The 3D structure of an endo-1,4-β-xylanase from the 10th family containing carbohydrate and unique cyclic structure located at the C-terminus of the polypeptide chain was obtained for the first time.     

An enzyme activity capable of endotransglycosylation of heteroxylan polysaccharides is present in plant primary cell walls

Heteroxylans in the plant cell wall have been proposed to have a role analogous to that of xyloglucans or heteromannans, forming growth-restraining networks by interlocking cellulose microfibrils. A xylan endotransglycosylase has been identified that can transglycosylate heteroxylan polysaccharides in the presence of xylan-derived oligosaccharides. High activity was detected in ripe fruit of papaya (Carica papaya), but activity was also found in a range of other fruits, imbibed seeds and rapidly growing seedlings of cereals. Xylan endotransglycosylase from ripe papaya fruit used a range of heteroxylans, such as wheat arabinoxylan, birchwood glucuronoxylan and various heteroxylans from dicotyledonous primary cell walls purified from tomato and papaya fruit, as donor molecules. As acceptor molecules, the enzyme preferentially used xylopentaitol over xylohexaitol or shorter-length acceptors. Xylan endotransglycosylase was active over a broad pH range and could perform transglycosylation reactions up to 55 °C. Xylan endotransglycosylase activity was purified from ripe papaya fruit by ultrafiltration and cation exchange chromatography. Highest endotransglycosylase activity was identified in fractions that also contained high xylan hydrolase activity and correlated with the presence of the endoxylanase CpaEXY1. Recombinant CpaEXY1 protein transiently over-expressed in Nicotiana benthamiana leaves showed both endoxylanase and xylan endotransglycosylase activities in vitro, suggesting that CpaEXY1 is a single enzyme with dual activity in planta. Purified native CpaEXY1 showed two- to fourfold higher endoxylanase than endotransglycosylase activity, suggesting that CpaEXY1 may act primarily as a hydrolase. We propose that xylan endotransglycosylase activity (like xyloglucan and mannan endotransglycosylase activities) could be involved in remodelling or re-arrangement of heteroxylans of the cellulose-non-cellulosic cell wall framework.     

Production of thermo-alkali-stable xylanase by a novel polyextremophilic Bacillus halodurans TSEV1 in cane molasses medium and its applicability in making whole wheat bread

A high titre of thermo-alkali-stable xylanase was attained in cane molasses medium. When the culture variables for endoxylanase production were optimized [cane molasses 7 %, soluble alkaline extract of wheat bran (SAE-WB) 37 % and ammonium chloride 0.30 %], a 4.5-fold enhancement in xylanase production (69 U ml^?1) was achieved as compared to that in the unoptimized medium (15 U ml^?1). The enzyme titre attained in shake flasks could be sustained in a 7-l laboratory bioreactor. An activity band corresponding to 40 kDa was visualized on SDS-PAGE zymogram analysis. The enzyme has broad range of pH and temperature for activity with optima at 9.0 and 80 °C, and stable between pH 4.0 and 11.0 with 85 % retention of activity. It has T _1/2 of 40 and 15 min at 70 and 80 °C. The enzyme is halotolerant since it displays activity in the presence of salt up to 15 %, and remains 100 % active in the absence of salt. The supplementation of whole wheat dough with xylanase improves antistaling property, reducing sugar content, bread volume with prebiotic xylooligosaccharides in bread. This is the first report on xylanase production in cane molasses medium with SAE-WB as the inducer and its applicability in whole wheat bread making that improves human health.     

Plant growth promoting activity of seaweed liquid extracts produced from Macrocystis pyrifera under different pH and temperature conditions

Most commercial algal extracts are produced from brown algae by alkaline hydrolysis; however, little scientific information has been published regarding the details of the production process. In this research, we have investigated the effect of pH (pH 8–12) and temperature (40, 60, and 80 °C) on liquid extract production from the brown alga Macrocystis pyrifera. Production conditions influenced the physicochemical characteristics of the final product as the extract viscosity increased with increasing pH and temperature to a maximum which occurred at pH 10 and 80 °C. This suggests that at higher pH conditions, alginate and other polysaccharides were extracted. All the extracts obtained promoted growth of tomato plants (Solanum lycopersicum) and adventitious root formation in the mung bean cutting bioassay (Vigna radiata), as the pH process was increased during the production of the liquid extracts. The highest auxin-type activity was obtained with the extract produced at pH 11 and 80 °C, while the fastest tomato seedling growth was achieved with the extract produced at pH 12 and 80 °C.     

Expression of a keratinase (kerA) gene from Bacillus licheniformis in Escherichia coli and characterization of the recombinant enzymes

The gene kerA (1,047 bp) encoding the main keratinase from Bacillus licheniformis was cloned into two conventional vectors, pET30α and pET32α, and expressed in Escherichia coli. From SDS-PAGE analysis, the recombinant keratinases were 45 and 55 kDa. They had different optimal pH values (7.5 and 8.5) but the same optimum temperature of 50 °C. The recombinant keratinase produced in E. coli pET30α-kerA was more stable than that produced in E. coli pET32α-kerA, and retained approx. 70 % of its total enzyme activity after 30 min at 70 °C.     

Direct amplification of new cellulase genes from woodland soil purified DNA

Eight genes encoding cellulolytic enzymes were obtained by direct PCR amplification of genomic DNA recovered from woodland soil samples. The direct amplifications were carried out by using primers designed from available online cellulase nucleotide sequences. The isolated genes were all different from each other and homologous to endo-β-1,4-glucanases of Bacillus subtilis. The cellulases were functionally expressed in Escherichia coli and tested on soluble substrate at 37 and 60 °C, showing different cellulolytic activities. Among these, the enzyme renamed CelWS6 exhibited good activity at higher temperatures. Further analysis of CelWS6 showed a high performance in acid environments (between pH 4.0 and 6.0) and at elevated temperatures with its maximum activity at pH 5.0 and 50 °C. At the optimum pH, it was very stable since more than 80 % of its original activity was maintained after an incubation of 120 min at 60 °C. Because the cellulases had different cellulolytic activities, but similar amino acid sequences, it was possible to assess the relationship between sequence and protein function.     

Production and purification of high levels of cellulase-free bacterial xylanase by Bacillus sp. SV-34S using agro-residue

Xylanase produced from the isolated bacterial strain Bacillus sp. SV-34S showed a 8.74-fold increase in enzyme activity under optimized submerged fermentation conditions. Cultivation using wheat bran as the carbon source and beef extract and (NH₄)H₂PO₄ as the nitrogen source resulted in productivity of 3,454.01 IU/mL xylanase. Xylanase was purified by 12.94-fold, with a recovery of 13.4 % and a specific activity of 3417.2 IU/mg protein, employing ammonium sulphate fractionation followed by cation-exchange chromatography using CM-Sephadex C-50 column chromatography, with a product of 27 kDa. The purified xylanase showed an optimum temperature and pH of 50 °C and 6.5, respectively although it was active even at pH 11.0. The thermostability study revealed that Bacillus sp. SV-34S was thermotolerant, being stable up to 50 °C; the residual activity at 55 and 60 °C was 96 and 93 %, respectively. The enzyme was stable between pH 6.0 and 8.0, although it retained >100 % activity at pH 8.0 and 9.0, respectively, following pre-incubation for 24 h. Xylanase activity was inhibited by various metal ions added to the assay mixture, with maximum inhibition observed in the presence of HgCl₂. The K_m and V_max values of the purified xylanase using birch wood xylan as substrate were 3.7 mg/mL and 133.33 IU/mL, respectively. The isolated bacterial strain produced high levels of extremophilic cellulase-free xylanase. The fact that it can be used in crude form and that it can be produced cheaply with renewable carbon sources make the process economically feasible. The characteristics of the purified enzyme suggest its potential application in industries such as the paper and pulp industry.     

Characterization of a cold-adapted and salt-tolerant esterase from a psychrotrophic bacterium Psychrobacter pacificensis

An esterase gene, est10, was identified from the genomic library of a deep-sea psychrotrophic bacterium Psychrobacter pacificensis. The esterase exhibited the optimal activity around 25 °C and pH 7.5, and maintained as high as 55.0 % of its maximum activity at 0 °C, indicating its cold adaptation. Est10 was fairly stable under room temperatures, retaining more than 80 % of its original activity after incubation at 40 °C for 2 h. The highest activity was observed against the short-chain substrate p-nitrophenyl butyrate (C4) among the tested p-nitrophenyl esters (C2–C16). It was slightly activated at a low concentration (1 mM) of Zn²⁺, Mg²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Fe³⁺, urea and EDTA, but was inhibited by DTT and totally inactivated by PMSF. Interestingly, increased salinity considerably stimulated Est10 activity (up to 143.2 % of original activity at 2 M NaCl) and stability (up to 126.4 % after incubation with 5 M NaCl for 6.5 h), proving its salt tolerance. 0.05 and 0.1 % Tween 20, Tween 80, Triton X-100 and CHAPS increased the activity and stability of Est10 while SDS, CTAB had the opposite effect. Est10 was quite active after incubation with several 30 % organic solvents (methanol, DMSO, ethanediol) but exhibited little activity with 30 % isopropanol, ethanol, n-butanol and acetonitrile.     

Production of xylanases by mangrove fungi from the Philippines and their application in enzymatic pretreatment of recycled paper pulps

Mangrove fungi are vastly unexplored for enzymes with industrial application. This study aimed to assess the biocatalytic activity of mangrove fungal xylanases on recycled paper pulp. Forty-four mangrove fungal (MF) isolates were initially screened for xylanolytic activity in minimal medium with corn cob xylan as the sole carbon source. Eight MF were further cultivated under submerged fermentation for the production of crude xylanases. These crude enzymes were then characterized and tested for the pretreatment of recycled paper pulps. Results showed that 93 % of the tested MF isolates exhibited xylanolytic activity in solid medium. In submerged fermentation, salinity improved the growth of the fungal isolates but did not influence xylanase production. The crude xylanases were mostly optimally active at 50 °C and pH 7. Changes in pH had a greater effect on xylanase stability than temperature. More than half of the activity was lost at pH 9 for majority of the crude enzymes. However, two thermophilic xylanases from Fusarium sp. KAWIT-A and Aureobasidium sp. 2LIPA-M and one alkaliphilic xylanase from Phomopsis sp. MACA-J were also produced. All crude enzymes exhibited cellulase activities ranging from 4 to 21 U/ml. Enzymatic pretreatment of recycled paper pulps with 5 % consistency produced 70–650 mg of reducing sugars per gram of pulp at 50 °C after 60 min. The release of high amounts of reducing sugars showed the potential of mangrove fungal crude xylanases in the local paper and pulp industry. The diverse properties shown by the tested crude enzymes also indicate its potential applications to other enzyme-requiring industries.